User Entry/Default value

Hi Experts,
  In my query i am having a User Entry/default value for characteristic variable.When i run the report for a particular value the data is not shown but if i run the report with out an entry then the data is shown for that value.
User entry/Default variable is blocking the data?
Can somebody give me an idea where lies the problem?

Hi Venkat,
Details:
Processing type: User entry/Default value
Default value: -
(blank)
Type of variable:Characteristic Value
Variable represents: selection Option..
Where can i check if problem is with variable or not?

Similar Messages

  • User entry variable with exclude values

    Hello All,
    I created a  user entry/ default value variable, which allows multiple single values and is optional entry. And I also got to exclude few values from this infoobject as well as have a variable.  When I select and exclude my value from selsction and run the report, I get a system error and the varibale is converted to mandatory entry. The detail error message is displayed below.  Any useful input will be awarded
    Diagnosis
    Variable &V1& is used in the query in such a way, that an optional entry is not possible.
    For example, you might be using an "Exclude", or the variable might be connected using OR to additional selections for &V2& in the global filter, but is still displayed in the columns selections.
    It is also not possible to use an optional parameter variable to fill an interval selection in either the from-field or the to-field.
    System response
    Procedure
    If you are able to accept the mandatory entry, you need not do anything. Otherwise you must work with several variables in the query. You can use an optional interval variable to do this.
    Procedure for System Administration

    Hello ,
    I did try creating a variable with the foll details:
    Variable Type : User Entry / Default Value
    Variable Represents : Multiple Single values
    Variable entry optional
    When I run the query it converts my variable to mandotary entry.  but I want to have optional user entry variable.
    Any help will be awarded

  • User entry variable on navigational attribute

    Hi,
    Can I create a Manual Entry/Default Value variable on a navigational attribute?
    Thanks,
    P R.

    Hi,
    Thanks for your replies.
    The attribute is in the master data carrying infoobject. We changed it from display to navigational after the query was created so that we can create variable. The query is based on ODS. In the query, I don't see the option of creating variable on the navigational attribute. Is there any other step to be done?
    Thanks.

  • User entry

    Hi,
    I have a requirement as following.
    I have one date 'planned completion date' and that this is getting populated from source sytem and is part of transaction data. I have one more date which 'report run date' with this i will do 'planned completion date' - 'report run date' then i wl get delay.
    report rundate is the one which user is entering during report run at report level. then i should find the difference between 'planned completion date' and 'report run date'.
    How to achieve this? should i have to have a field for 'report run date' at transaction data level? pl give me some hint for achieving this requirement.
    Thanks & Regards,
    Vijaya

    Hi Vijaya,
    You can try this.........
    Include one more date field (report run date) and use a user Entry Default variable. Create 2 formula variables with replacement path on both the data fields and find the difference.
    http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
    Hope this helps............

  • Default value determination at the sales documents

    There are different types of delivery or billing blocks at the sales document header (such as "02 - Political reasons", "01 Credit limit" and etc....). There exist other types of selectable issues at the sales, delivery document or other types of documents. How can I have a default value that I have etermined before? How is this determination or assignment of default value can be done? I don't mean a user spesific default value.
    Thanks in advance.

    Hi,
    You can try to use the item category (in SPRO), billing block field. Select a billing block in the item category, and this will put default billing block when a sales order is created.
    Regards

  • Allowing user to modify default value - is this possible?

    A report needs to be produced with the default value of an input variable (0FISCPER) set to the current fiscal period - this is used to calculate the YTD and Full Year Forecast of the present year. The default is required to allow the user the view the present day information without having to enter the current date manually - i.e. <b>no pop up variables screen</b>.
    The complication occurs when it is required for the user to be able to modify the input variable to view historical data. Is it possible for the end user to adapt the current default (i.e. the current month) to a month of his/her choice?

    Thanks all - I've been experimenting a bit over the past few days with this. This is my situation so far:
    The Year-to-Date and Forecast variables take in 0F_FPER as its input - 0F_FPER is a user entry variable.
    There is a user exit variable which exists in the system which returns the current fiscal period called 0FPER. I need this variable to be the YTD and Forecast default inputs <i>without the variables entry screen popping up</i>.
    Once the user is in the report, it is required to be possible for them to enter a date (it may be in the previous year) to allow them to view historical data.
    <u>What I am thinking about doing is creating new YTD and Forecast variables that will take 0FPER in as an input.</u>
    However, 0FPER is hardcoded to return the current fiscal year. <b>Is it therefore possible to allow the user to input another value into 0FPER? Would this not conflict with the coding?</b>

  • Assigning a default value to a user property

    Hi everyone,
    do you know how can I assign a default value to a user property? It would be great if I should be able to assign it from the administration without writing any code (like profile web services...).
    Thank you!
    Alberto Marchiaro

    Hi Alberto,
    I don't think you can currently do this. In other words you can't set a default value for some object property and have it subbed in when no better value is available.
    You can however create a default profile, and set values for the object properties assigned to users (You do this by going to the "Default Profiles" manager). You can then edit the "Default Profile" that is already there (or create a new one), and edit the "Properties and Names". Set the value field to whatever you'd like to be copied by default.
    Once done, all new users that are created via a User Synchronization job will have this default profile. The changes will not apply to users that were previously created. If you created a new Default Profile in the Default Profiles Manager, then you need to goto the Authentication Source that you are doing your sync's from and pick which profile you'd like to use for All Groups. You can also create custom Default Profiles for various groups.
    Hope this helps,
    Akash

  • Setting default value read from user session, for an LOV in Query component

    I want to set the default value of a field in VO that participates in a named view criteria and thereby in Query component. That field is configured with an LOV by mean of a view accessor. The values are Y and N and the corresponding display strings obtained from view accessor are true and false respectively.
    I am able to set the default value by setting the value of the criteria item corresponding to that field in view criteria. I am setting the value as either Y or N and I am able to corresponding display string as per the view accessor, on the query component when it is rendered.
    I want to read the defauilt value from the ADF BC user session and set it as default value. I tried setting the values as "adf.userSession.userData.usageFlag". Iam ensuring that the attribute usageFlag is set before the view activity that has the query component is invoked. But this is ending up showing no default value in the Query component when rendered.
    Can any one let me know how to go about with this?

    I made up your table since you didn't provide some example, but I'm sure this will give you the picture:
    SQL> var run_type varchar2(1)
    SQL> exec :run_type := 'A'
    PL/SQL procedure successfully completed.
    SQL> create table my_cycles as select level cycle_id
      2                            ,      level cycle_status
      3                            from   dual connect by level <= 5;
    Table created.
    SQL> select cycle_id
      2  from   my_cycles
      3  where  case
      4           when :run_type = 'D' and cycle_status  = 1 then 1
      5           when :run_type != 'D' and cycle_status  in ( 2, 3 ) then 1
      6         end = 1;
      CYCLE_ID
             2
             3
    2 rows selected.
    SQL> exec :run_type := 'D';
    PL/SQL procedure successfully completed.
    SQL> /
      CYCLE_ID
             1
    1 row selected.
    SQL>

  • User defined function to set a default value of a column

    Hi All
    Can we use user defined function to set a default value of a column ??
    for example:
    create or replace  function test1  return number is
    begin
    return 10;
    end;
    create table testt
    (id  as test1,
      name varchar2(20));
    error:
    ORA-02000: missing ( keywordThanks
    Ashwani

    174313 wrote:
    MichaelS for showing example to use function in table ddl , otherwise i was thinking we cannot use function in table ddl as per error I received.That was an example of a virtual column.
    ORA-04044: procedure, function, package, or type is not allowed hereUsing PL/SQL code like that raises 2 basic problems. If that PL/SQL code for the calculating the column default breaks, what happens to the SQL insert statements against that table. These will need to fail as the table definition depends on the PL/SQL code. This is problematic as this dependency simply increases the complexity of the SQL object.
    The 2nd issue is performance. PL/SQL code needs to be executed by the PL/SQL engine. This means a context switch from the SQL engine to the PL/SQL engine in order to determine the default value for that column. Context switching is a performance overhead.
    So even if it was possible to use a PL/SQL function as parameter for the SQL default clause, I would not be that keen to use it.

  • How to make default value in form input field disappear on user click

    I have an HTML input tag with a default value.
    How can I have that value disappear when user begins to type?
    Form is here:
    http://www.kardsbykaren.us/10pack.php
    Happy Holiday and thanks.

    Have a look here http://www.matiasmancini.com.ar/ajax-jquery-validation-html5-form.html
    Gramps

  • Can you set default values for person/group picker fields? To current user?

    Two-part question/issue . . .
    Part 1:
    In InfoPath 2013 in use with SharePoint 2013, how do you set a Default Value for Person/Group Picker fields? Other field types like Text Boxes have a Default Value section in the Data tab of Properties.  There doesn't appear to be any equivalent for
    the Person/Group Picker field type in Properties.  I'd like to set a default person for a few fields in a form I've created.  Is this possible?
    Part 2:
    The default user I want to set for one of those Person/Group fields is the "current user."  I want a user to log into our SharePoint 2013 intranet, load a new form for edit/creation, and have one of the Person/Group fields in that form to
    automatically populate this particular user.  Is this possible?

    Hi Stephen,
    You can auto populate your InfoPath farm with current user Name and all other property that you have in your User profile, you have couple of options.
    First you can make a secondary connection in your InfoPath form with user profile and can use the UserProfileService.asmx and call the GetUserProfileByName method. Here is the steps you can follow.
    http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
    Secondly you can use JQuery and SPServices ,
    $().SPServices.SPGetCurrentUser function to populate the values with script to achieve the same in this case you no need to use InfoPath form just create simple text type column in SharePoint
    list and auto populate it with getting the current user Name from User Profile here is the scripts
    <script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery-1.4.2.min.js"></script>
    <script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery.SPServices-0.5.4.min.js"></script>
    <script language="javascript" type="text/javascript">
    $(document).ready(function() {
      var userCurrentName = $().SPServices.SPGetCurrentUser({
        fieldName: "CurrentUser"
      $("input[Title='CurrentUser']").val(userCurrentName);
      var userPhone = $().SPServices.SPGetCurrentUser({
        fieldName: "WorkPhone"
      $("input[Title='Phone']").val(userPhone);
    </script>
    Krishana Kumar http://www.mosstechnet-kk.com

  • Calling a user defined function as default value for a column

    Hi All
    Can we call a user defined function as default value for a column ??
    for example:
    create or replace  function test1  return number is
    begin
    return 10;
    end;
    create table testt
    (id  as test1,
      name varchar2(20));
    getting error:
    Error at line 1
    ORA-02000: missing ( keywordThanks
    Ashwani
    Edited by: Ashwani on Jan 16, 2012 1:19 AM

    Hi;
    For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Database » SQL and PL/SQL which you can get more quick response
    Regard
    Helios

  • Portal Forms - How to make a Field with DEFAULT value NON-EDITABLE by Users

    I HAVE A FORM WITH A DATE FIELD ON IT WITH DEFAULT VALUE.
    THIS IS A TABLE-FIELD.
    I WANT THE FIELD TO BE DISPLAYED ON THE FORM BUT NOT TO ALLOW
    USERS TO EDIT/CHANGE IT.
    HOW CAN I DO THIS?
    TKS IN ADVANCE

    Hi,
    see Re: sequencing problem-Forms
    Regards Michael

  • How can i get user entry values at WAD

    Hi I need some user entry values display at wad?
    suppose i have x( user entry) if i will give x=1000
    on top need to show 1000 values?
    i need user entry boxes at wad level only
    ple let me know

    Hi,
    you have to set the checkbox "Display Variable Screen" in WAD. You can find if under:
    Web Template Parameters->Display Variable Screen
    Regards
    Erwin

  • Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

    The javescript in below link works for me.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
    However, I'd like to set default user for people picker only when user checks a checkbox. 
    I am new to  development. Could you please help me on this requirement ?
    Thank you very much. 

    Hello,
    Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
    http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

Maybe you are looking for