User exist at loading start for shipment txn (VT02N)

Hi Guru,
May I know is there any user exist at loading start button for shipment transaction (VT02N)? As we need to include some logic to auto generate the value then populate that value into standard SAP fields ( external id field VTTK/EXTI1).
And can we direct update the output value from that user exist to standard SAP fields ( external id field VTTK/EXTI1) in VT02n transaction?
Pls help and advise.
Thanks,
LH.

Hi
EXIT_SAPLV56F_011 is the place which is activated while setting shipment status (any of these including loading start).
You can manipulate the standard VTTK fields there.
Dominik Modrzejewski

Similar Messages

Output determination configuration for SHIPMENT (txn VTO2N)

Hi Expert,
Please give me the all steps for Output determination configuration for SHIPMENT (txn VTO2N).
Since I am technical guy I am not aware with this configuration, so please consider it and please provide me from scratch.
As I create one output type ZAV7 it is similar to ZA02 existing one.
i copied existing program that is running for ZA02.
AND ASSIGNED THIS COPIED PROGRAM TO NEW FORM i.e. ZAV7(output type).
After that I transfer it to 220 client.
when I run Txn VT02N. for ZA02 the form is coming properly.....but for ZAV7.....
it gives the message
You have specified an output category which has not been defined according to the output determination procedure.
After this message i am not able to do the configuration.
thanks
Babbal

Hi Babbal,
You have to assign ouput type to the ZAV7.
Please follow the following configuration:
Go to SPRO> Logistics execution> Transportation> Basic transportation functions> Output control> Maintain output determination for shipments
Steps-
1. Maintain condition table or u can use the existing table 017 "Shipment type" or 022 "transport planning point and shipment type".
2. Maintain access sequence: Here you can use standard access sequence 0001 or 0002 based on the condition table you have maintained.
3. Maintain output type- Add new entry ZAV7, give description. In general data tab page assign the access sequence you used. Check the access to conditions. For default values tab page- maintain the dispatch time as 4 Send immediately, transmission medium as 1print output, partner function as CR. in storage system tab page maintain the storage mode as 1Print only. In Print tab page maintain the parameter as 8Transportation planning point.
Double click on Processing routines and maintain the program, form entry and form name program.
Double click on Partner function and maintain medium as 1Print output and functional partner as CR. Save it.
4. Maintain output determination procedure: Standard procedure will be already maintained V70001 "Transportation Output". Select the procedure and double click on control data. Click on new entries and maintain the step as 30, counter 1 and enter the output type ZAV7. Save this.
5. Assign output determination procedures: maintain the shipment type, the output determination procedure and output type. Save this.
Please reply for any further clarification.
Regards
Suvankar

How to findout Which are the User Exist had been activated for T.Code

Hi Everybody,
-->I want to know, what are the user exits have been activated or used for a particular t.code.
--> I will give a small example it will be give clear idea on my question.
-->For my client, they used lot of user exist and screen exist in the sales order screen,how to find out them. Is their any easy way to find out which are user exist had been acitviated for a particular template.
Regards,
Madhan

If you mean how to see a user list with the T-Code they are using.
Then you can just use T-Code SM04.
It will give all the information about those user.
Or If you mean User Exists.
then please use this link
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Thanks,
Sugauli
Edited by: Sugauli on Dec 11, 2008 9:20 PM

Cj12 User Exist and Badi's

Hi Experts,
As per my bussiness requirement , I need user exist or Badi requied for a Transaction Code CJ12.
In Transaction Code CJ12 , when i select system/user status button click , another window will come , in that I have status with status no screen, any radio button select then the below screen Status w/o status no screen , as per my requirement radio button select.
This is my requirment , I have to satisfy the two condition . So please help me on this which user exist or badi's are avilable for this Tcode CJ12.
Advance Thank you.
Thank You
Srinu

Srinu,
this is the program SAPLCJWB fro CJ12.
open the program and look for call customer-function that displays all the user exits
Thanks
Bala Duvvuri

Standard/default print program for Shipment

I need the standard print program name for Shipment (VT01N, VT02N, VT03N) to print an adobe form. Can anybody help me? Thanks in advance.

Output Type SPAT
Application V7
Program RVADSPAT
Form RV_FREIGHT_SUPPL
Hope its helpful
KR
Alfons

Need a user exit or enhancement point for loading start button in VT02

I have a requirement to write the code for loading start button and complete PGI as soon as loading start is checked in VT02(shipment transaction).
Please suggest....

HI Venkata,
Below are the user exits and BADIs in the transaction VT01
Enhancement
V56UNUMB                                Shipment number allocation
V56UDLUP                                Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UCHCO                                Check shipments are complete
V56UCHCH                                Shipment processing: Check whether changes were made
V56TDLIF                                Filter Delivery Items for Shipment
V56SLDET                                Shipment processing: Leg determination
V56MVT04                                Extensions for Collective Processing of Shipments
V56LOCID                                Shipment Processing: Determine Location Identification
V56LDELI                                Read Delivery Data for Shipment Processing
V56L0001                                Status of Shipments for a Delivery
V56FSTAT                                Shipment processing: Activities when setting a status
MV56AINI                                Initialization of transaction control for transportation
V56USTAT                                User-individual definition of transportation planning status
V56USVDO                                Update new objects for transport
V56USVDP                                Preparation for updating new objects for transport?
V56AFCCH                                Shipment processing: Check function code allowed
V56AGTAR                                User Exit for Filtering Shipping Unit Calculation
V56ARCHV                                Customer-spec. checks for archiving shipments
V56ATKTX                                Change the number of lines for text input in shipment
V56BMOD                                 Transportation processing: Field modification
V56DISTZ                                Shipment Processing: Determine Distance
V56FCOPY                                Shipment processing: Copy delivery data
Business Add-in
BADI_V56N                               User Exit Transport - Message Determination
BADI_LE_SHIPMENT                        BadI: Shipment Processing
Regards,
Radhika

Customized User Profiles not loading for Network Users

I manage Macs in public computer labs and classrooms at a university. My general set up is as follows:
Clients are running 10.8.5, OD Masters are running 10.7.5. Open Directory Master to manage client preferences for Login window and screen saver. Clients bind to Active Directory for authentication purposes only. Networked users home directories are stored locally then deleted at log out. Using Deploy Studio to image and restore clients.
My customized user profiles are stored in /User Templates/Non_Localized.lproj.(I also update English.lproj for any local users that may need to be created for various reasons).
Recently I have come across a situation where, randomly, my customized user profile does not load at Login, and I am given the out-of-the-box default Apple profile. This is happening in 11 of my 14 labs. I have three labs that seem to not be affected by this.
On some labs I manage the DHCP, some labs I do not, and rely on our Networking group to supply DHCP and DNS. Because of this setup I have six different DNS server that may be in the mix. Two are Unix boxes, the other four are the Active Directory Domain Control servers. I did create a spreadsheet of all the AD/OD settings for each lab to see if I could find some kind of pattern, but don't see a way to upload it.
The one thing I do notice is that when I do a mass login using a shell script via Apple Remote Desktop, when the profile fails to build correctly, the user login is quick, much quicker than when the correct profile loads. Almost as if a packet is sent the the OD server, it's rejected, and bam, Apple's default profile loads.
I have flushed the DNS cache of the local clients using killall --HUP mDNSResponder
I've got one week to figure this out before classes start, so if you have a clue as to what's going on, I sure would be grateful.
Here are logs from both the admin's account and the user's account when the default profile fails to build:
ADMIN log:
8/20/14 1:31:03.366 PM CVMServer[109] Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/20/14 1:31:03.389 PM loginwindow[44] Login Window - Returned from Security Agent
8/20/14 1:31:03.491 PM loginwindow[44] USER_PROCESS: 44 console
8/20/14 1:31:04.084 PM WindowServer[75]    **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:31:06.307 PM locationd[563] NOTICE,Location icon should now be in state 0
8/20/14 1:31:06.478 PM coreaudiod[560] Enabled automatic stack shots because audio IO is inactive
8/20/14 1:31:06.621 PM UserEventAgent[548] cannot find fw daemon port 1102
8/20/14 1:31:08.530 PM WindowServer[75]    Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:31:09.707 PM NetworkBrowserAgent[591]    Starting NetworkBrowserAgent
8/20/14 1:31:10.393 PM apsd[593]   Certificate doesn't match host
8/20/14 1:31:11.499 PM com.apple.SecurityServer[15]    Session 100010 created
8/20/14 1:31:13.561 PM genatsdb[608]   ########## genatsdb Sandboxed. ##########
8/20/14 1:31:13.562 PM apsd[593]   Certificate doesn't match host
8/20/14 1:31:13.740 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:31:14.555 PM apsd[593]   Certificate doesn't match host
8/20/14 1:31:45.040 PM genatsdb[608]   *GENATSDB* FontObjects generated = 1113
8/20/14 1:31:55.663 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.628 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.628 PM WindowServer[75]    dict count after removing entry for window 0x2a is 0
8/20/14 1:32:20.641 PM com.apple.launchd[1]    (com.apple.quicklook.satellite.4D0B4319-944D-49A6-A515-02F31AE3C235[628]) Could not terminate job: 3: No such process
8/20/14 1:32:20.641 PM com.apple.launchd[1]    (com.apple.quicklook.satellite.4D0B4319-944D-49A6-A515-02F31AE3C235[628]) Using fallback option to terminate job...
8/20/14 1:32:20.645 PM coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=188
8/20/14 1:32:20.647 PM coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=147
8/20/14 1:32:20.647 PM coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=194
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.716 PM loginwindow[44] DEAD_PROCESS: 44 console
8/20/14 1:32:20.891 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.930 PM coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=158
8/20/14 1:32:22.259 PM WindowServer[75]    CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
8/20/14 1:32:22.259 PM WindowServer[75]    Session 256 released (1 references)
8/20/14 1:32:22.259 PM WindowServer[75]    Session 256 released (0 references)
8/20/14 1:32:22.259 PM WindowServer[75]    loginwindow connection closed; closing server.
8/20/14 1:32:22.268 PM apsd[593]   CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/20/14 1:32:22.285 PM loginwindow[653]    Login Window Application Started
8/20/14 1:32:22.299 PM UserEventAgent[11] Captive: [UserAgentDied:139] User Agent @port=45319 Died
8/20/14 1:32:22.310 PM ARDAgent[574]   CGSGetNextEventRecord (Inline) connection 0xb903, 16384 bytes
8/20/14 1:32:22.310 PM ARDAgent[574]   CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.310 PM ARDAgent[574]   CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.311 PM blued[58]   -[CBManager init] init returning self:0x7ff6a3b04990
8/20/14 1:32:22.329 PM WindowServer[654]   Server is starting up
8/20/14 1:32:22.330 PM WindowServer[654]   Session 256 retained (2 references)
8/20/14 1:32:22.330 PM WindowServer[654]   Session 256 released (1 references)
8/20/14 1:32:22.333 PM WindowServer[654]   Session 256 retained (2 references)
8/20/14 1:32:22.333 PM WindowServer[654]   init_page_flip: page flip mode is on
8/20/14 1:32:22.357 PM WindowServer[654]   mux_initialize: Couldn't find any matches
8/20/14 1:32:22.367 PM WindowServer[654]   GLCompositor enabled for tile size [256 x 256]
8/20/14 1:32:22.367 PM WindowServer[654]   CGXGLInitMipMap: mip map mode is on
8/20/14 1:32:22.424 PM WindowServer[654]   WSMachineUsesNewStyleMirroring: true
8/20/14 1:32:22.425 PM WindowServer[654]   Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a0120000000004280480
8/20/14 1:32:22.425 PM WindowServer[654]   Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
8/20/14 1:32:22.425 PM WindowServer[654]   Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
8/20/14 1:32:22.429 PM WindowServer[654]   Created shield window 0x4 for display 0x04280480
8/20/14 1:32:22.429 PM WindowServer[654]   Created shield window 0x5 for display 0x003f003e
8/20/14 1:32:22.429 PM WindowServer[654]   Created shield window 0x6 for display 0x003f003d
8/20/14 1:32:22.431 PM WindowServer[654]   Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a0120000000004280480
8/20/14 1:32:22.431 PM WindowServer[654]   Display 0x003f003e: GL mask 0x4; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
8/20/14 1:32:22.431 PM WindowServer[654]   Display 0x003f003d: GL mask 0x2; bounds (2945, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
8/20/14 1:32:22.431 PM WindowServer[654]   CGXPerformInitialDisplayConfiguration
8/20/14 1:32:22.431 PM WindowServer[654]     Display 0x04280480: MappedDisplay Unit 0; Vendor 0x610 Model 0xa012 S/N 0 Dimensions 18.70 x 10.51; online enabled built-in, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
8/20/14 1:32:22.431 PM WindowServer[654]     Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
8/20/14 1:32:22.431 PM WindowServer[654]     Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
8/20/14 1:32:22.522 PM WindowServer[654]   GLCompositor: GL renderer id 0x01022647, GL mask 0x00000007, accelerator 0x00003fab, unit 0, caps QEX|QGL|MIPMAP, vram 512 MB
8/20/14 1:32:22.527 PM WindowServer[654]   GLCompositor: GL renderer id 0x01022647, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
8/20/14 1:32:22.530 PM loginwindow[653]    **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:32:22.557 PM WindowServer[654]   Created shield window 0x7 for display 0x04280480
8/20/14 1:32:22.557 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:22.609 PM launchctl[657] com.apple.findmymacmessenger: Already loaded
8/20/14 1:32:22.613 PM hidd[49]    CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.613 PM hidd[49]    CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.621 PM com.apple.SecurityServer[15]    Session 100012 created
8/20/14 1:32:22.622 PM loginwindow[653]    Login Window Started Security Agent
8/20/14 1:32:22.666 PM com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:22.667 PM com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:22.681 PM UserEventAgent[659] cannot find useragent 1102
8/20/14 1:32:22.686 PM com.apple.dock.extra[644]   Check-in to the service com.apple.imagent.desktop.auth failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/20/14 1:32:22.693 PM SecurityAgent[665] MacBuddy was run = 0
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSGetNextEventRecord (Inline) connection 0xc917, 16384 bytes
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSReleaseShmem : Cannot release shared memory
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.696 PM com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:22.696 PM com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:22.696 PM com.apple.dock.extra[644]   [Warning] Bad response from daemon for setup info
8/20/14 1:32:22.704 PM WindowServer[654]   MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280480 device: 0x106d8d110 isBackBuffered: 1 numComp: 3 numDisp: 3
8/20/14 1:32:24.429 PM WindowServer[654]   **DMPROXY** (2) Found /System/Library/CoreServices/DMProxy'.
8/20/14 1:32:24.459 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:24.500 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:24.695 PM com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:24.696 PM com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:24.696 PM com.apple.dock.extra[644]   [Warning] Bad response from daemon for setup info
8/20/14 1:32:40.928 PM com.apple.launchd[1]    (com.apple.dock.extra[644]) Exit timeout elapsed (20 seconds). Killing
8/20/14 1:32:40.928 PM coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=202
8/20/14 1:33:35.215 PM SecurityAgent[665] User info context values set for jsuny
8/20/14 1:33:35.297 PM SecurityAgent[665] Login Window login proceeding
8/20/14 1:33:36.387 PM loginwindow[653]    Login Window - Returned from Security Agent
8/20/14 1:33:36.000 PM kernel[0]   Sandbox: kcm(695) deny mach-lookup com.apple.networkd
8/20/14 1:33:36.453 PM loginwindow[653]    USER_PROCESS: 653 console
8/20/14 1:33:37.052 PM locationd[708] NOTICE,Location icon should now be in state 0
8/20/14 1:33:37.107 PM UserEventAgent[700] cannot find fw daemon port 1102
8/20/14 1:33:37.683 PM xpcd[611]   MiniLauncher[711]: registration request failed: (0x12, 0xd) process failed sandbox check
8/20/14 1:33:37.907 PM WindowServer[654]   **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:33:38.011 PM coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=237
8/20/14 1:33:38.114 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:33:38.395 PM imagent[737]    [Warning] Setting up a new messages database.
8/20/14 1:33:38.428 PM NetworkBrowserAgent[747]    Starting NetworkBrowserAgent
8/20/14 1:33:40.068 PM com.apple.time[700] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:33:40.069 PM com.apple.time[700] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:33:43.910 PM netbiosd[89]    name servers down?
8/20/14 1:33:56.635 PM netbiosd[89]    notify name "self.mdns.disconnection" has been registered 20 times - this may be a leak
8/20/14 1:33:56.639 PM netbiosd[89]    notify name "self.mdns.disconnection" has been registered 40 times - this may be a leak
8/20/14 1:34:49.927 PM netbiosd[89]    name servers down?
8/20/14 1:35:54.977 PM netbiosd[89]    name servers down?
USER LOG:
8/20/14 1:31:03.956 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: UserName
8/20/14 1:31:03.956 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: GroupName
8/20/14 1:31:03.957 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/20/14 1:31:03.961 PM loginwindow[44] Connection with distnoted server was invalidated
8/20/14 1:31:04.013 PM distnoted[549] # distnote server agent absolute time: 799.097924175   civil time: Wed Aug 20 13:31:04 2014   pid: 549 uid: 1467285364 root: no
8/20/14 1:31:08.954 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[588]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:31:08.955 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[588]) Job failed to exec(3) for weird reason: 2
8/20/14 1:31:08.958 PM com.apple.launchd.peruser.1467285364[536]   (com.google.keystone.user.agent[590]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:31:08.958 PM com.apple.launchd.peruser.1467285364[536]   (com.google.keystone.user.agent[590]) Job failed to exec(3) for weird reason: 2
8/20/14 1:31:12.394 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.mrt.uiagent[578]) Exited with code: 255
8/20/14 1:31:15.132 PM SystemUIServer[557] Could not load menu extra NSBundle </System/Library/CoreServices/Menu Extras/User.menu> (loaded) for Class AppleUser
8/20/14 1:32:20.642 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.quicklook[626]) Exited: Killed: 9
8/20/14 1:32:20.647 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.mdworker.single.08000000-0000-0000-0000-000000000000[641]) Exited: Killed: 9
8/20/14 1:32:20.647 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[635]) Exited: Killed: 9
8/20/14 1:32:20.783 PM Dock[556]   could not open iterator, -43, for directory <ECDirectory: 0x7fd8ac846970> {path=/Users/jsuny/Documents/} (directory changed)
8/20/14 1:32:20.783 PM Dock[556]   problem iterating directory, -43, for directory <ECDirectory: 0x7fd8ac846970> {path=/Users/jsuny/Documents/} (directory changed)
8/20/14 1:32:22.310 PM ARDAgent[574]   HIToolbox: received notification of WindowServer event port death.
8/20/14 1:32:22.311 PM ARDAgent[574]   port matched the WindowServer port created in BindCGSToRunLoop
8/20/14 1:32:22.694 PM com.apple.dock.extra[644]   HIToolbox: received notification of WindowServer event port death.
8/20/14 1:32:22.694 PM com.apple.dock.extra[644]   port matched the WindowServer port created in BindCGSToRunLoop
8/20/14 1:33:36.504 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: UserName
8/20/14 1:33:36.504 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: GroupName
8/20/14 1:33:36.505 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/20/14 1:33:36.517 PM loginwindow[653]    Connection with distnoted server was invalidated
8/20/14 1:33:37.429 PM MiniLauncher[711]   Skipping Setup Assistant for user 1467285364
8/20/14 1:33:37.464 PM transition[714] INFO: Not signed into MobileMe, nothing to do. Reason: 3
8/20/14 1:33:37.506 PM MiniLauncher[711]   INFO: MMAccountMgr_Private: finishedSetup called.
8/20/14 1:33:38.180 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[744]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:33:38.180 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[744]) Job failed to exec(3) for weird reason: 2
8/20/14 1:33:38.489 PM CalendarAgent[741] Could not find Meta Data for persistent Store
8/20/14 1:33:38.877 PM fontd[716] FontWorker failed to return directory info (IPC failure?) for file://localhost/Users/jsuny/Library/Fonts/
8/20/14 1:34:48.723 PM migCacheCleanup[719]    Cache cleanup: cleanup for user 1467285364 took 0.43 seconds
8/20/14 1:37:15.114 PM Dock[723]   no information back from LS about running process

Check these out:
http://images.apple.com/server/macosx/docs/UserManagementv10.5.mnl.pdf
http://clc.its.psu.edu/Labs/Mac/Resources/blastimageconfig/
 http://blog.macadmincorner.com/

User Exist for MM - Purchase Order

Hi ABAP expert,
is there any user exist for Purchase order, actually i'm want to prevent the user from do the deletion on PO items, as per my understanding we can use user exit.
can anyone help and how to do the process ?

Hi,
1. Just copy and paste this code and execute it.
2. Give the Tcode "ME21" and you will see the lot of user exits.
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
Thanks,
Reward If Helpful.

Gnome won't start for regular user

I've got Xorg installed, and KDE. These both work fine for regular users. I decided to put Gnome on the box and play with it, and it loads fine for root. When I log in as a regular user and try to start Gnome, it comes up with an ugly desktop, a splash screen, then just an X for the mouse on the ugly desktop.
I'm assuming this must be a permissions problem, but I'm not sure what needs to be changed. I checked out the gnome and kde directories, and everything seems to be owned by root, so I know I'm missing something somewhere.
If permissions, what needs to be changed? If not, then what?

I've upgraded to gnome 2.12, it still doesn't load
As it _tries_ to load, it brings up a message box saying "gnome-settings-handler could not be started" or something to that effect, which basically means nothing can run.
I tried deleting /tmp, didn't work.
I'm getting _really_ frustrated
I dont want to go back to XFCE (I dont want to open another terminal just to eject my dvd drive ever again), and I'm getting insanely sick of KDE.. it's just un-usable..
Sorry if anyone out there likes KDE.. no offence.. but I just find it un-usable..

Help.I have an itunes account and wanted to set up a new one .All my music from existing account loaded automatically onto new itunes account.The main point of this was to start with a blank canvass

help.I have an itunes account and wanted to set up a new one .All my music from existing account loaded automatically onto new itunes account.The main point of this was to start with a blank canvass

Yes
Put all the music on one computer, make sure it is authorized for all accounts, sync.

Screensaver says "Loading Photos" for a few seconds before starting

Hello,
I have a mid 2011 Imac and am running OSX 10.9.5. I have a photo screensaver which directs to a specific folder of about 2,000 photos (total size of 8 GBs). Before the screen saver starts, it displays a screen saying "Loading Photos" for approximately 5 seconds. I know this is a small problem, but it's annoying. This used to not happen and the photos would start being displayed immediately after the screen saver starts. I think this "Loading photos" started around the time I upgraded to Mavericks. I just installed 8 more GBs of RAM (total of 12), thinking this would solve the problem, but the "Loading photos" still happens.
How can I fix this? Is this symptomatic of other speed issues?
Thanks.

Safari is a fully Universal Application which means it does not run under Rosetta on an Intel Mac, nor does it run under Rosetta on PowerPC based machine as Rosetta does not exist for PowerPC.
I have no idea what you could possibly mean when you say you watch WMP clips, unless you have a WMP player visible in Safari. In this case Safari is still not running under Rosetta but possibly the WMP player is.
Also try using real words in your replies rather than bad spelling. Your reply should have been "Yes it does, that's how I watch WMP clips", hardly difficult.

Shipping dates(Loading start,Loading End,shipment start...)

Hi,
In the shipment transaction(VT01n) what (Configuration)settings are required to populate the fields
Loading start,Loading End,shipment start, and shipment end dates in the Planning side.
REgards
Rahul

Yes. Its called Inferred member concept or Early Arriving facts
You can handle them as follows
1. In the ETL for fact identify cases where you've dimension key value coming but reference missing from the corresponding dimension table
2. Insert those records to dimension table with just the available business key value and retrieve the generated surrogate key. For all the other attributes put some default value. Have a bit field called IsInferred in the table with default value 0. Set
it to 1 for the above records. This would avoid missing reference error for FK
3. In the ETL for the dimension include one step to look for cases where IsInferred = 1 and do an update of all attribute values except business key. Also make sure IsInferred is reset to 0. This will make sure the missing information gets automatically
added during the next ETL run for the dimensions
4. If you make use of standard SCD task available in SSIS it can take care of this scenario by itself
See
http://www.mssqltips.com/sqlservertip/1446/handle-early-arriving-facts-in-sql-server-integration-services-ssis/
http://chandunayakwadi.blogspot.in/2013/01/handling-inferred-members-in-ssis.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Lightroom 3.x won't start for one user on my computer. Works fine for all others. Help?

I'm running Vista and LR 3.2. I have multiple users accounts on the same computer (my family members). Everyone is able to use LR except one user. Whenever he trys to launch LR, he gets an error message that says:
"Lightroom - Opening Catalog: IMG_0154.JPG.lrcat"
Directly under that is the MS Windows dialog box that says "LR 64-bit has stopped working" and to look for an online solution and close the program.
I really don't want to reinstall LR again unless I can do so without losing the catalogs from all the other users. It would be best if we didn't lose the catalog from the user that can't start LR, too. It's lotsa work to redo... Help on what to do?
-Willcy-

Don't have a clue what's happening, but workaround
should eb possible bu creating a ne catalog then importing original into
new. Steps required:
1. User opens their accoun on PC
2. Hold down Alt key when launching Lightroom. A dialog should open that will allow you to switch catlogs or create a new one
3. Choose Create New Catlog. Give it a name (e..g the Users name). and make sure that it is located within the Users account area on hard disk (same location as original is probably best).
4. When Lr opens go to File menu and choose Import from Catalog
5. A dialog will open. Locate the old catlog (i.e. the lrcat file) and select.
6. Hit Choose button
7. Lightroom will check integretity and contents of old catalog. A dialog will open. Make sure all folders are checked.
8. Hit Import button.
9. Close Lr when catlog import is complete.
10 Reopen Lightroom. The new catalog should open by default

Reg. User exist for G/L account change

Dear Experts
I want to create new contion or user exist for change the G/L account from consumption account to
stock account.
That is when I create purchase order with account assignment the stock account should be assigned instead of consuption account.
Without any account assignment mean no problem,that accounts are posted correctly.Stock account and GR/IR account.
Thanks
Rajakumar.k

While create Purchase order.
If Acct assignment E - Stock account - depending on the material type
Acct assignment and item cat. E & L WIP of material
Like the above.
while I create purchase order the consumption account is posted and after enter the sale order
the G/L for consumption is changed to stock account. I can see the changes directly.
Thanks
Rajakumar.k

User exists for changing the selection screen of the transaction CS11

Hi,
I want to change the selection screen of the transaction cs11 and modify the ALV output.
I searched the old forums but not got satisfactry results.
I want to change the plant and material from the parameter to the select option.
i dont want to copy the transaction for the zcs11.
any suggestion on this ?
Regards,
udupi

one more requirement i have is that, i need to remove all the header fields such as material , plant etc and place that field in the item level. i can use the user exists PCSD0002 for the adding the customer field in the item. but how can i removed the header level field such as plant and material. whether we have any user exits for that?

User exist at loading start for shipment txn (VT02N)

Similar Messages

Maybe you are looking for