User exit activation and deactivation in production server
If I activate project of corresponding user exit and after transporting the request to Production ,
then for deactivating the project will a request is generated or should i login to Production for deactivating the project.
Thanks
Hi,
Deactivating the project would again ask for a request so we have to deactivate in development and take it via a transport to production.
Regards,
Himanshu
Similar Messages
-
Data Slice dynamic activation and deactivation for a set of users
Hi Experts,
We have requirement to manually enter the data into RTC using IP.
There are 2 sets of users --> Power Users and Normal Users.
We need to allow the normal users to enter the data only from 1st to 5 th working day of every month.
Power Users should have authorization to edit and enter the data at any time.
Can any one suggest how to set the dataslice using code.
Regards,
ShashiHi.
Please note that update of RSPLS_DS table do not affects at RUNTIME.
If you want to create dataslice that activated and deactivated within sequence run you should do the next:
1. Create exit variable that return you all working days EXCEPT 1 to 5 of each month.
2. Create dataslice in modeler on this characteristic with restriction by this exit variable.
3. This dataslice should be based on ABAP class as described [here|https://www.box.net/shared/zhirrvk859].
4. In mydataslice method enter following code (I assume you have any DSO with definition whether user is power user or not. Lets say DSO has next structure:
USER | Z_IS_POWER |
aaaa | NO
bbbb | YES
Enter the next code in mydataslice method:
SELECT Z_IS_POWER FROM YOURDSO INTO lv_POWER WHERE USER=sy-uname.
IF sy-subrc = 0. *This is SUPER USER. Allow locked data edition
e_noinput = rs_c_false.
ELSE. *This is regular user. Do not allo locked data edition
e_noinput = rs_c_true.
5. Create in modeler 2 planning sequences for activating and deactivation dataslice as described in document.
6. Each time you want to do something with locked data run first sequence for deactivation of dataslice. If super user will run it so dataslice will be deactivated, but if regular user - dataslice will lock the data.
Regards. -
User exit during planned order to production order conversion
Hi,
Let me know if there is any user exit during planned order to production order production.
Regards,
YogeshDear
You can try the following :
1.PPCO0001 /PPCO0007 /PPCO0012
2.BADI workorder_update
3.Check in SMOD or CMOD and enter PPC* -you will find all the related user exit
Hope this helps
Regards
JH
Edited by: Jiaul Haque on Oct 21, 2010 10:55 AM -
User exit EXIT_SAPLL03T_002 and jobs
Hi everybody,
I have a problem with user exit EXIT_SAPLL03T_002 and trx LT12, i put code (the code is in the end) in the user exit in order to update the field QNAME from the standar table LTAP, the sentences for the update are in a job.
The problem is when a run the LT12, put the order and press enter the trx finish normally, but when i see the jobs resumen (SM37) there isnt any job.
Thank you for your help, see you.
INCLUDE ZXLTOU02 *
DATA:
WJ_JTANUM LIKE LTAP-TANUM,
WJ_LGNUM LIKE LTAP-LGNUM,
WJ_WERKS LIKE LTAP-WERKS,
WJ_USER LIKE SY-UNAME,
Parametros para el Job
l_numero LIKE tbtcjob-jobcount, "ID de un job de fondo
l_fecha LIKE tbtcjob-laststrtdt, "Fecha de ejecución más tardía
l_hora LIKE tbtcjob-laststrttm, "Ultima hora de ejecución para
l_jobname LIKE tbtco-jobname VALUE 'JOB_RF',
W_USER LIKE SY-UNAME,
W_HORA LIKE SY-UZEIT,
W_DIA LIKE SY-DATUM.
GET PARAMETER ID 'mb_usuario' FIELD W_USER.
Solo lo realiza para la transaccion LM05 y LM07
y si es por logueo No SAP
***ANTIGUO
*IF ( SY-TCODE EQ 'LM05' OR
SY-TCODE EQ 'LM07' OR SY-TCODE EQ 'LM03' OR
SY-TCODE EQ 'LM04') AND ( W_USER NE '' ).
**********ACTUALIZADO 07/02*********
IF ( SY-TCODE EQ 'LM05' OR
SY-TCODE EQ 'LM07' OR SY-TCODE EQ 'LM03' OR
SY-TCODE EQ 'LM04' OR SY-TCODE EQ 'LT12' ) AND ( W_USER NE '' ).
ojo
UPDATE ZTMB_USERCOLA
SET STATU = ' ' DOCNUM = ' '
WHERE
BNAME = W_USER.
GET PARAMETER ID 'mb_hora' FIELD W_HORA.
GET PARAMETER ID 'mb_dia' FIELD W_DIA.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = l_jobname
IMPORTING
jobcount = l_numero
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
SUBMIT ZUPDATE_LTAP
AND RETURN
VIA JOB l_jobname NUMBER l_numero
WITH WJ_TANUM = T_LTAP_VB-TANUM
WITH WJ_LGNUM = T_LTAP_VB-LGNUM
WITH WJ_WERKS = T_LTAP_VB-WERKS
WITH WJ_USER = W_USER.
Llama a la funcion para cerrar el Job
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = l_numero
jobname = l_jobname
strtimmed = 'X' "Inicio inmediato
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
ENDIF.
REPORT ZUPDATE_LTAP .
PARAMETERS:
WJ_TANUM LIKE LTAP-TANUM, " Numero de OT
WJ_LGNUM LIKE LTAP-LGNUM, " Almacen
WJ_WERKS LIKE LTAP-WERKS, " Centro
WJ_USER LIKE SY-UNAME, " Usuario SAP
W_QNAME LIKE LTAP-QNAME.
data: w_actual, w_timeout type i.
Actualiza el campos de usuario
w_actual = '0'.
w_timeout = 0.
while w_actual = '0' and w_timeout < 300.
w_timeout = w_timeout + 1.
WAIT UP TO 7 SECONDS.
UPDATE LTAP
SET QNAME = WJ_USER ZZRF_BNAME = WJ_USER
WHERE
TANUM = WJ_TANUM
AND
LGNUM = WJ_LGNUM
AND
WERKS = WJ_WERKS.
AGREGANDO 4 ENERO
UPDATE ZTMB_USERCOLA
SET TPICKEO = SY-UZEIT FPICKEO = SY-DATUM
WHERE
LGNUM = WJ_LGNUM
AND
BNAME = WJ_USER.
AGREGANDO 4 ENERO
if sy-subrc = 0.
w_actual = '1'.
UPDATE LTAK SET ZZRF_BNAME = WJ_USER
WHERE TANUM = WJ_TANUM AND
LGNUM = WJ_LGNUM.
endif.
commit work.
endwhile.Hi,
Check the print parameters. Probably after execution you may be deleting the job.
You can change the print parameters during runtime.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
no_dialog = 'X'
user = sy-uname
IMPORTING
OUT_ARCHIVE_PARAMETERS =
out_parameters = params
valid = ws_valid.
IF ws_valid <> space.
params-pdest = 'LOCL'. "Destination
params-primm = ''. "Print Immediately
params-prnew = 'X'. "New Spool Request.
params-armod = '1'. "Print: Archiving Mode - Print Only
params-linct = 65. "Rows
params-linsz = 255. "Cols
params-paart = 'X_65_255'.
params-prrec = sy-uname. "User name
params-prsap = ''. "Print: SAP Cover Page
params-prunx = ''. "PRINT: Host spool cover page
params-prcop = '001'. "number of copies
SUBMIT zmib_fiber_link_background
WITH file = i_file_list-name
WITH rb1 = space
WITH rb2 = c_x
WITH p_launch = c_x
VIA JOB ws_c_session NUMBER ws_c_jobnum
EXPORTING LIST TO MEMORY
TO SAP-SPOOL
WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS params
AND RETURN.
endif.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = ws_c_jobnum
jobname = ws_c_session
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
Also check the sy-subrc after JOB_OPEN.
Regards
Subramanian -
Please send material or good lionk on USER-EXIT,BADI and ENHANCEMENT
Hi All,
Please send some step by step material or good lionk on USER-EXIT,BADI and ENHANCEMENT which will be usefull for beginners like me.
Thanks in advance
SrikantaHi Srikanta,
Please see the SDN page for ABAP Enhancements and Modifications:
https://www.sdn.sap.com/irj/sdn/abap?rid=/webcontent/uuid/109f5161-ee76-2910-cb99-db10b559ef4b [original link is broken]
Cheers,
Ville -
Dear Experts,
I am pretty new in BAPI,BADI ,BDC,ALE ,IDOC,USER EXIT,VALIDATION AND SMART FORMS.
Pls let me know for these topics shall i put the question in this community or should i put in any other form. Pl suggest me .
Regards
ShivasPlz SEARCH in SCN before posting ,you will get lot of posts .
Don't use all caps in the subject line -
Which user exit can be use before production order creating?
which user exit can be use before production order creating?
i want to check AFPO data,then show error message before production order creating.
1.i try to use PPCO0001( enhancement when saving the order) to check AFPO data, then show some error message,sap system will generate a abap down error.
2.i try to use PPCO0007(Exit when saving production order),
i can show error message,but i can't check AFPO's data.Hi,
You can access AFPOD structure using field symbols.
Try below mentioned code in routing:
constants: c_afpod TYPE char30 VALUE '(SAPLCOKO1)AFPOD' .
FIELD-SYMBOLS: <fs_afpod> TYPE ANY .
data: wa_afpod TYPE afpod.
ASSIGN (c_afpod) TO <fs_afpod>.
wa_afpod = <fs_afpod>.
Then later you can use wa_afpod in exit PPCO0007. Hope this will work for you.
Sumit -
Difference between user exit,enhancement and BAdi
hello guys,
what is the difference between user exit,enhancement and BAdi.
Please do let me know..
Thanks in advance.
regards,
praveen.Pls do search the forum before posting*
-
What is mass activator and deactivator?
hi all,
Can anyone explain me what is mass activator and deactivator in Multi provider and in infocube?
can anyone let me know with examples.
regds
harithaHi,
When you choose <b>Mass Activator</b> a list of all objects in the system appears with their status. You can select the objects to be activated from this list and then activate them at one time.
http://help.sap.com/saphelp_nw04/helpdata/en/3b/f2a8d4fb377c47b0aa25ae9ae160d6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3b/f2a8d4fb377c47b0aa25ae9ae160d6/frameset.htm -
Badi and user exit active at the same time ?
Hi All,
Please let me know whether
1> I can have a BADI and a user exit both active at the same time for the same enhancement?
2> I can have a BADI and a user exit both active at the same time but they are for different purpose.
eg: BADI -- > to change statistical date of po item line on ME21N screen
User Exit -- > to change the exchange rate on PO header on me21n screen
Please response to the second point... as this is what I am working on.
Regards,
ShitalHello,
Thanks for your response.This is my code.
WSA_header = IM_HEADER->GET_DATA( ).
wsa_header-wkurs = '0.6668'.
CALL METHOD im_header->set_data
EXPORTING
im_data = wsa_header.
Kind Regards,
Shital -
User Exit not getting Triggered in Quality Server
Hi,
In FM 'IDOC_INPUT_DESADV' Iam using an User Exit 'EXIT_SAPLEINM_006' ,
which is getting triggered in Development server.But when I moved it to Quality,
The User Exit is not getting triggered.Thou the Exit is assigned to Enhancement
and that in turn is assigned to Project, still the problem persists.
Can any one suggest me what could be the problem.
Regards,
Kiran B.Kiran,
Check the <b>Project</b> of that enhancement is active or not. not the enhancement.
<b><REMOVED BY MODERATOR></b>
Satish
Message was edited by:
Alvaro Tejada Galindo -
hi all,
im trying to use user exits. how should i activate the user exit. is there anything else i should do to use the user exits. im using a project veda0001 which is already there and active. but only 2 of the exits are active there. i want another exit to be in active state. how can i do that.
thanks,
kiranKiran,
Both exists are contained in SAP-enhancement VEDA0001. Use transaction CMOD to go to your existing project.
Then use bullet Enhancement assignment and change and enter the enhancement VEDA0001. Then save the project.
Now you can go to the components, double click on the exit, then double click on the INCLUDE ZX.... part and enter your coding of the exit.
Don't forget to deactivate en activate the project again after you have finished.
Regards,
John. -
A/R User Exit Spec and code
The spec -
1. Canadian tax - currently based on Freight type: Read the country(?) Ship-from (plant jurisdiction) to Ship-to(customer jurisdiction) and the inco term on the line item of the sales order and if it's not equal to 'DDP' the line item tax classification will be set to '0' exempt. (This is freight that comes into Canada from the US)
We will look at the shipto and shipfrom txjcd on the sales order document and billing document along with the inco term logic and we will tax freight when they are both Canada
Example Scenario:
For Freight charges where the Ship from is in Canada (Bedco, Artmedco, etc) and the Ship-to is in Canada the freight will always be taxable regardless of the inco term. This is freight that ships within Canada, no boarder crossing.
2. Regular Freight - US & Canada: If separate line item on sales order, it may be exempt from tax based upon state. revisit
a. D.1 Freight included on the line item
i. The freight is passed to the external system by populating the field FREIGHT. The freight amount is always included in the base amount.
ii. An example to fill the freight using the user-exit:
iii. In the customer pricing procedure (for example ZUSA01) enter 4 in the subtotal field of the freight condition type (OTC must have this configuration in the pricing procedure for the freight pricing conditions).
iv. In the customer structure CI_TAX_INPUT_USER, add the field KZWI4 as in KOMP-KZWI4.
v. In the user-exit, add the code CH_USER_CHANGED_FIELDS-FREIGHT_AM = I_INPUT_USER-KZWI4.
3. For PO Specific A/R Tax Exemptions using material tax class of 2, pass the TAXM1 field to the ACCOUNT_NO field in Taxware
oSolution:
For PO Specific Tax Exemptions CSR will go to the line item detail Billing Tab, Tax Classification field (TAXM1) and change that to 2 One-Time Exemption. Configuration complete.
CSR will go to the Text Tab, Internal Item Notice and CSR will provide a brief description as to why that line is tax exempt.
This the code----
TABLES: KNVV, KNA1, KOMK, MLAN, T001W, KNVI.
DATA: w_taxm1 LIKE mlan-taxm1,
i_kna1 LIKE kna1,
c_com_tax type com_tax,
i_komk LIKE KOMK.
*--- if this freight comes into canada from US then set TAXM1 to 0
*----otherwise set TAXM1 to 2 and apply frieght charges. Set ACCNT_CLS
*----to 'Y' each time TAXM1 is passed to ACCNT_NO.
IF KNA1-LAND1 EQ 'CA'.
IF C_COM_TAX-TXJCD_SF EQ C_COM_TAX-TXJCD_ST.
CH_USER_CHANGED_FIELDS-FREIGHT_AM = I_INPUT_USER-KZWI4.
w_taxm1 = 2.
CH_USER_CHANGED_FIELDS-ACCNT_NO = W_TAXM1.
CH_USER_CHANGED_FIELDS-ACCNT_CLS = 'Y'.
ELSEIF C_COM_TAX-TXJCD_SF NE C_COM_TAX-TXJCD_ST.
C_COM_TAX-TXJCD_SF = C_COM_TAX-TXJCD_ST.
C_COM_TAX-TXJCD_POA = C_COM_TAX-TXJCD_ST.
SELECT SINGLE * FROM KNVV
WHERE INCO1 = KOMK-INCO1
AND INCO1 NE 'DDP'.
IF SY-SUBRC EQ 0.
w_taxm1 = 0.
CH_USER_CHANGED_FIELDS-ACCNT_NO = W_TAXM1.
CH_USER_CHANGED_FIELDS-ACCNT_CLS = 'Y'.
ENDIF.
ENDIF.
ENDIF.
SELECT SINGLE taxkd FROM knvi INTO knvi-taxkd
WHERE kunnr = i_komk-kunwe
AND aland = i_komk-land1.
IF SY-TCODE = 'VA01' OR SY-TCODE = 'VA02' OR SY-TCODE = 'VA03' OR
SY-TCODE = 'VF01' OR SY-TCODE = 'VF02' OR SY-TCODE = 'VF03' OR SY-TCODE
= 'VF04' OR SY-TCODE = 'VF05' OR SY-TCODE = 'VF05'.
SELECT SINGLE * FROM kna1 INTO i_kna1
WHERE kunnr = i_komk-kunwe.
IF i_KNA1-land1 EQ 'CA'.
C_COM_TAX-TXJCD_SF = C_COM_TAX-TXJCD_ST.
C_COM_TAX-TXJCD_POA = C_COM_TAX-TXJCD_ST.
ENDIF.
ENDIF.
I am able to enter the user exit, but there is no value for KNA1-LAND1 or C_COM_TAX-TAXJCD_SF or C_COM_TAX-TAXJCD_ST. Does anyone what I am missing ? Please help.
Thanks in advance !!!!
NHi NP ,
which User exit ur using ? Are u talking abt MIRO or VF01.
Regards
Prabhu -
Issue with user exit ZXPADU01 and ZXPADU02
Hi,
I am trying to change the existing record for the info type 0015 for an employee in Pa30 transaction.
my requirement is i need old value and new value when i am changing the existing record in info type 0015.
When i kept break point in user exit ZXPADU01 it is not triggering it is triggering only when we creating the record.
i tried with user exit ZXPADU02 it is not working as per my requirement.
My requirement is :whenever i am changing the existing record(modifying record) i need old value and new value.
Anybody can suggest me how to fix this issue.
Thanks,
MaheedharDear Maheedhar,
The best way to achieve this requirement is to use the PAI user exit ZXPADU02 import parameter PSAVE. The PSAVE parameter contains the PBO original / initial record, before any changes take place.
The INNNN parameter contains the current PAI record as usual, in order to be used for customer check and new values. Thus, you've got both the old and the new record in place, and you can make your comparison according to the business requirements: -
Difference in user exit , fm and includes
HI,
What is user exit , function module and includes? What is the difference among them? When and how to use them? Please provide example.
Regards,
PramodHi Pramod,
user exits, function modules and includes can not be compared to each other. Each one of them carry their own purpose and functionality.
User exit's help you in achieving the additional functionality that standard SAP doesnt offer.
For example, if your client requirement is add another tab in sales order in addition to the existing ones............it can be done using the user exit.
SAP has provided several user exits through which you provide the additional functionality to the client without disturbing the SAP standard code.
you can view SAP standard user exits using t-code: SMOD
Function modules help you in carrying out a specific task. They can be called into a program to perform a particular task and are resuable any number of times i.e. can be called into any program to perform the same task.
SAP has already provided many function modules, for example - for determining exhange rates, reading texts etc.
Apart from the SAP standard ones, you can also develop your own function module using transaction code SE37 and use them appropriately.
Includes can be defined as sub programs.........they are part of a program. Include can either be local or global i.e. can be restricted to be used in a particular program and can be made available to other programs.
Basically, a main program is divided into several includes for a better understanding.
REWARD POINTS IF HELPFUL
Regards
Sai
Maybe you are looking for
-
This only happens with youtube videos
-
Cannot save form although I've enabled the rights using Acro 8 Pro
I created a form in Acrobat 8 Pro (using the 30 day trial, trying to see if I can do it first as suggested I can before I buy). I prepared the form in the design mode, I enabled it with save (and other) capabilities for Reader (under the advanced men
-
Seems like previous versions of LR (2. and lower) would display the total numer of photos in the the entire file structure beneath the file highlighted. LR 3.0 and up appears to only display the number of photos in the highest level of the file stru
-
hi I am dong (just started few days back)10g OCP (DBA). i love to play with it lot.so i installed 11gr2 db version first.then i deleted the db orcl using dbca.NOW i am trying to install RAC..if i install RAC and create a db or restore a db from takin
-
i purchased photoshop cs5 and I want to re install it because I have a new computer but I do not have the disk only the serial number?