User Exit After Saving in CO11N (After Get Confirmation counter AFRU-RMZHL)

Hi All.
I need a user exit for PP confirmation (T-code co11n)
what I need is action after saving which gives me confirmation counter for table AFRU colum RMZHL.
I need all data that will be inserted in table AFRU since I want to duplicate Afru wth Z-Table when user does confirmation
in short explanation is When co11n writes data to AFRU, it need to write data to ZTable too (exactly same data, but less field in ztable)
I've tried these exits but none of these success
CONFPI02
CONFPI04
CONFPM05
CONFPP02
CONFPP04
CONFPP05
CONFPP06
Thanks
Vicky S

Hi Nabheet Madan
If I'm not mistaken, you mean
I should prepare background job that collect data from AFRU into Z-table
is it right?
Thanks

Similar Messages

  • BADI / User exit for Purchase order(ME21N) after saving the document

    Hi expert,
    I need the BADI / User exit for Purchase order(ME21N) after saving the document
    This is for email sending after create the purchase order so PO document number will be the import parameter
    pls help me
    point will be reward
    Regards,
    Ganesh

    Hi Ganesh,
    Could you please share your solution?
    Thanks.
    Hoops
    Edited by: Hoops on Jun 13, 2011 10:51 PM

  • ABAP-User Exit CONFPP05 (T-code co11n) ---- Duprec exception

    I'm currently working on user exit CONFPP05 (T-code co11n)
    I'm trying to validate shift hour not more than 8 hours.
    total_jam = v_iserh + v_ism01 + v_ism02 + v_ism04 + afrud_tab-ism01 + afrud_tab-ism02 + afrud_tab-ism04.
    IF total_jam > 8.
       MESSAGE 'Jam Total Shift > 8 !!!' TYPE 'E'.
    ENDIF
    and I'm facing a problem, when i give error message with type E.
    When the program execute that error, the program succesfully run the error message, buat after that, when I press ENTER or SAVE button, it give me runtime error
    here I catch some error
    "Exception condition "DUPREC" raised."
    Error analysis A RAISE statement in the program "SAPLCORB" raised the exception condition "DUPREC". Since the exception was not intercepted by a superior program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
    Trigger Location of Runtime Error
    Program                                 SAPLCORB
    Include                                 LCORBU08
    Row                                     100
    Module type                             (FUNCTION)
    Module Name                             CO_RU_DI_AFRU_INSERT
    How can I deal with this problem?

    Hi
    Keshav is right. To display the messages see SAP Note 406633 - No information messages from customer exit. For further information see SAP Note 367489 - Customer exits of confirmation.
    Regards
    Eduardo

  • User exits for saving in IQ02 transaction.

    Hi All,
    I have the following problem: The end user is unable to save few fields (Stock type, plant, storage location) data in IQ02 transaction.
    1. Enter IQ02 transaction, give the material and serial number.
    2. In SerData tab, give the stock type, plant and storage location
    3. Now when I am trying to save, the following error is prompted: "System status ESTO is active (EQU 30055392)"
    4. After this when I press continue button, the data is not saved.
    I feel that there could be some problem in the user exits for this transaction. Please tell me the user exits for saving in this transaction.
    Thanks,
    Vishal.

    Hi Vishal,
    Please find list of userexit for Tcode IQ02 as below,
    Exit Name           Description
    IEQM0001            Add. checks for equip. installation at functional locations
    IEQM0002            Additional checks for definition of equipment hierarchies
    IEQM0003            Additional checks before equipment update
    IEQM0004            Object is allowed for contract partner (Order->MaintCont.)
    IEQM0005            Object allowed for SD contract (MaintContract->MaintCont.)
    IEQM0006            Object allowed for SD contract (Maintain maintenance cont.)
    IEQM0007            Check/change manufacturer field in equipment master.

  • User exit for saving a sales order

    hi
    wats the user exit when saving a sales order?

    Hi,
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    tables : modsap
    tcode : cmod,smod
    Reward if usefull

  • COR2 user exit for saving item changes

    Hi,
    i need to  change item contents with user exit while saving in COR2 transaction.I found several user exits with debugging.But could not accomplish to change fields.
    Please give me a user-exit name which can change the item contents while saving.
    Thanks.

    Hi burc,
    what about enhancement CONFPI05 Process Ord. Conf.: Cust.-Specific Enhancements when Saving, EXIT_SAPLCORF_405.
    Or tell in more detail what is it you want to change.
    Regards,
    Clemens

  • User-exit for transaction co13: PP Order Cancel Confirmation

    Hello!
    Whether prompt, please,
    exist what that user-exit for transaction co13: PP Order Cancel Confirmation?
    Thanks,
    Anton.

    Hi Antonio,
    Please check this all user exits (SMOD) available for CO13.
    CONFPP01  -  PP order conf.: Determine customer specific default values 
    CONFPP02  -  PP order conf.: Customer specific input checks 1           
    CONFPP03  -  PP order conf.: Cust. specific check after op. selection   
    CONFPP04  -  PP order conf.: Customer specific input checks 2           
    CONFPP05  -  PP order conf.: Customer specific enhancements when saving 
    CONFPP06  -  PP Order Confirmations: Actual Data Transfer               
    CONFPP07  -  Single Screen Entry: Inclusion of User-Defined Subscreens  
    CONFPS01  -  PS confirmation: Determine customer specific default values
    CONFPS02  -  PS confirmation: Customer specific input checks 1          
    CONFPS03  -  PS confirmation: Customer specific check after op. selection
    CONFPS04  -  PS confirmation: Customer specific input checks 2          
    CONFPS05  -  PS confirmation: Customer specific enhancements when saving
    CONF0001   -  Enhancements in order confirmation                         
    CONFPI01   -   Process order conf.: Calculate cust.specific default values
    CONFPI02   -   Process order confirmation: Customer spec. input checks 1  
    CONFPI03   -   Process order conf.: Cust. spec. check after op. selection 
    CONFPI04   -   Process order conf.: Customer specific input checks 2      
    CONFPI05   -   Process order conf.: Cust. spec. enhancements when saving  
    CONFPI06   -   Process order confirmation: Actual data transfer           
    CONFPM01  -  PM/SM order conf.: Determine cust. specific default values 
    CONFPM02  -  PM/SM order confirmation: Customer specific input checks 1 
    CONFPM03  -  PM/SM order conf.: Cust. spec. check after op. selection   
    CONFPM04  -  PM/SM order conf.: Customer specific input check 2         
    CONFPM05  -  PM/SM order conf.: Cust. specific enhancements when saving 
    Regards,
    Ferry Lianto

  • BADI USER/EXIT for inserting cust. data after the Pruch. Requsitio is SAVED

    Hi all,
    Is there any  BADI or USER EXIT available for the transaction ME51N to save
    some customer data fields in a separta Z table , after the data is saved from the
    Purcahse requistion .
    I  have used the customer exit MEREQ001 for additing the customer filelds with TABLE CONTROL.
    I am not able to save the data from the table control . Any suggestion on this will be apprecitated  .
    Best Regards

    Hi,
      You have  to use 'EXIT_SAPLMEREQ_003' to import data from screen to your tables and use 'EXIT_SAPLMEREQ_001' to send data to screen.use the below code like below:
    EXIT_SAPLMEREQ_001:
    tables : ci_ebandb.
    data : i_mereq_item type mereq_item.
    if im_req_item is initial.
    clear: ci_ebandb.
    else.
    i_mereq_item = im_req_item->get_data( ).
    move-corresponding i_mereq_item to ci_ebandb.
    endif.
    EXIT_SAPLMEREQ_003
    data : i_mereq_item type mereq_item.
    if not im_req_item is initial.
    i_mereq_item = im_req_item->get_data( ).
    move-corresponding ci_ebandb to i_mereq_item .
    call method im_req_item->set_data( i_mereq_item ).
    endif.
    Also set the flag EX_CHANGED = 'X' to transafer the changes to database
    Regards,
    Himanshu

  • User-exit/BADI in PPOME for After Update

    Hi,
    My requirement is as follows - After an object is created in PPOME/PP01, a relation is to be created between the newly-created object and a custom object. Is there any badi/user-exit that gets called after the new object has been saved to the db so that it is available for further processing.
    I tried with HRBAS00INFTY - BEFORE_OUTPUT, AFTER_INPUT, BEFORE_UPDATE, IN_UPDATE. But these methods are not called after the data is saved. Please suggest.
    Message was edited by:
            divya rajendiran

    Hi All,
    Is there any User-exit/BADI to this?
    Regards,
    Divya.

  • User Exit or BADI for MIRO after save

    Hi
    I want to show a message in MIRO once the invoice document is create but I am unable to find a user exit or BADI after save of the MIRO transaction.
    Please guide me in this aspect.
    Regards

    try to run the below codes in a new program,it can help you to find all user exits of a t-code:
    TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
    TABLES : tstct.
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
    IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
    SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
    SELECT SINGLE * FROM enlfdir WHERE funcname =
    tfdir-funcname.
    SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
    AND object = 'FUGR'
    AND obj_name EQ enlfdir-area.
    MOVE : tadir-devclass TO v_devclass.
    ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object = 'SMOD'
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu AND
    tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
    SELECT SINGLE * FROM modsapt
    WHERE sprsl = sy-langu AND
    name = jtab-obj_name.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    WRITE:/1 sy-vline,
    2 jtab-obj_name HOTSPOT ON,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
    AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

  • User exit to activate few controls after the order goes to credit hold

    Hi, we would like to turn on the fixed qty flag at the line item level and an header delivery block if an order goes on credit hold.
    We are looking out for the user exit which might can be used for this purpose (which can be executed after the credit check was done and before the order is saved either manually or automatically).
    Mothish babu

    but we want a credit check for certain customers only
    Activate credit check for the sales order. If you want to have credit check only for certain customers, maintain relevant credit limit records only for those customers in t.code FD32. If this does not solve the purpose, then you can make use of the field No credit check in t.code OVA8. Develop a routine to check for only certain customers in t,code VOFM ->Requirements->Credit check and assign this routine in OVA8.
    Regards,

  • Badi/User Exit for IE02 and IP02 after status changed to deleted/deactivate

    Hi all,
    I need to change the status of the Plan Maintenance(IP42) when the Functional Location(IP02) or the Equipment(IE02) status is change to deactivated/deleted.
    I cant find any related badi or userexit that can be used to achieve the above purpose.
    Is there any suggestion available to achieve that? Please advise. Thanks.
    Regards,
    lsemun

    Hi,
      You will either have to use the user exit on save or use the change documents functionality through transaction SWEC to trigger a  custom process to accomplish your needs.
    Regards
    Narasimhan

  • User exit while saving Service Purchase Order

    i want to update one z table from the Service PO, after saving. Hence i require , an user exit, which will give the details of the service tab , of the PO. I am not able to get any exit, where the details of the Service tab, of the transaction me22n.
    Below is the screen of the Service tab of the purchase Order Screen :
                                                                                    <b>Line      DeService numbShort text                   Quantity          Uni    Gross priceCr
        10          3000001     Sub-Con Recruitment Commissio91                DAY1,249.00       IN
        20          3000001     Sub-Con Recruitment Commissio91                DAY1,249.00       IN</b>

    hi,
    check this out .
    Transaction Code - ME21 Create Purchase Order
    Exit Name Description
    AMPL0001 User subscreen for additional data on AMPL
    LMEDR001 Enhancements to print program
    LMELA002 Adopt batch no. from shipping notification when posting a GR
    LMELA010 Inbound shipping notification: Transfer item data from IDOC
    LMEQR001 User exit for source determination
    LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001 Customer-Specific Source Determination in Retail
    M06B0001 Role determination for purchase requisition release
    M06B0002 Changes to comm. structure for purchase requisition release
    M06B0003 Number range and document number
    M06B0004 Number range and document number
    M06B0005 Changes to comm. structure for overall release of requisn.
    M06E0004 Changes to communication structure for release purch. doc.
    M06E0005 Role determination for release of purchasing documents
    ME590001 Grouping of requsitions for PO split in ME59
    MEETA001 Define schedule line type (backlog, immed. req., preview)
    MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
    MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
    MEQUERY1 Enhancement to Document Overview ME21N/ME51N
    MEVME001 WE default quantity calc. and over/ underdelivery tolerance
    MM06E001 User exits for EDI inbound and outbound purchasing documents
    MM06E003 Number range and document number
    MM06E004 Control import data screens in purchase order
    MM06E005 Customer fields in purchasing document
    MM06E007 Change document for requisitions upon conversion into PO
    MM06E008 Monitoring of contr. target value in case of release orders
    MM06E009 Relevant texts for "Texts exist" indicator
    MM06E010 Field selection for vendor address
    MMAL0001 ALE source list distribution: Outbound processing
    MMAL0002 ALE source list distribution: Inbound processing
    MMAL0003 ALE purcasing info record distribution: Outbound processing
    MMAL0004 ALE purchasing info record distribution: Inbound processing
    MMDA0001 Default delivery addresses
    MMFAB001 User exit for generation of release order
    MRFLB001 Control Items for Contract Release Order
    LMEKO001 Extend communications structure KOMK for pricing
    LMEKO002 Extend communications structure KOMP for pricing
    MM06E011 Activation of PReq Lock
    No of Exits: 38
    Kishi.

  • User Exit IDOC creation - When purchase order gets created

    Hi All,
    The requirement is whenever user creates a Purchase Order in the current SAP system an IDOC needs to get created and be sent to another SAP system where a Sales Order will be created.
    Can anybody suggest the correct User exit/enhancement at the time of Purchase order creation which could be used ?
    Also the function modules for creating the IDOCs within the user-exit.
    Thanks for your help.

    Hi Meghna,
    Your requirement is SAP standard function which means you don't have to use any user exit.
    What you need to do is configure output control, then when a PO saved, a idoc will send to vendor automaticly.
    Here is a step brief
    1. configure output type in NACE
    2. Add condition record in NACE
    3. Setup partner profile in WE20
    if you need detailed doc, give me your email, I can send you.
    Regards,
    Brown

  • Inbound idoc values when updated from user exit not saved

    I'm trying to process some user exits of an inbound idoc from WE19.
    The values get correctly populated to IDOC_DATA internal tables of IDOC_INPUT_ORDRSP function module in debug kode
    but when the new idoc is generated from WE19 , those segment values (populated by exit) are not shown/saved.
    The user exit is EXIT_SAPLEINM_007.
    Is it not possible to populate segment values of inbound idocs from using user exits. If yes , then during testing using WE19 , every time a new idoc is created it should display those values into the concerned segments. Please help.

    Hello,
    yes is possible it ...
    I think the problem is:
    or
    you have something wrong when to append the new line on internal table
    or
    the exit used is not correct: read the documentation on EXIT_SAPLEINM_0**

Maybe you are looking for