User exit for check on partners selected
Hi ,
Can anyone please guide me on how to perform a edit check when either SP or ZT partners
are selected. That is i need to restrict the user to be able to make selections from only certain partner list . SAY if SP partner type then only X and if ZT only Y.
What is the user exit? and how to approach suggestions please.
Thanks,
Das.
use an ehnacement for this: V09A0003 or V09A0004
remember to set the partner determination schema accordingly.
reward if helpful
regards
roberto mazzali
Similar Messages
-
User exit for checking the vendor emailid in me22n or me21n
hi all,
can anybody suggest me a user exit for checking the email id of the vendor in me21n or me22n or me29n.
plz suggest me a solution its urgent.hi yaan,
i checked with the user exit that u suggested me, it is getting triggered, i am able to check whether the vendor email id is present or not, but this is happening all the time that is even when the user dont want to send a email to the vendor i.e. he just wants to print the purchase order, even at that time this user exit is getting triggered and giving a message that the vendor email id is not maintained.
the reson why this is happening is there is no import parameter to this user exit which gives the "medium of data transfer" the user has entered. if i get this parameter visible inside the user exit, then i can check this parameter inside the user exit and do the required operation. i checked up with all the user exits in "me" package and even the other related packages but none of them is getting triggered,
do u know a user exit or badi which imports this parameter and also gets triggered at the time of creation of purchase order.
plz give me a solution.
regards,
santosh. -
User Exit for checking Purchase Requisitioner Field in CJ20N Transaction
Hi,
I want user Exit for checking Purchase Requisitioner field while making PR through CJ20N transaction. I have trie EXIT_SAPLEBND_001 user exit. Problem in this user exit is I am not getting Purchase Requisitioner No & Item No in I_CEBAN
structure.
Please suggest what to do ?
Regard's
ShabbirHi,
You can check with this BADI ME_PROCESS_REQ_CUST.
Kindly refer below mentioned link for further details:
Badi ME_REQ_POSTED For CJ20N Transaction
Hope this will help you.
Regards,
Mudita -
User exit for checking creation of prod. order reference to sales order?
Hi all,
What are user exit suitable for checking creation of prod. order reference to sales order to have the same plant. If plant not the same, an error message should appear.
thanks.Hi,
user exits:
PPCO0003 Check exit for order changes from sales order
PPCO0007 Exit when saving production order
Regards,
Vivek -
User-Exit for Checking Customer and Sale order type in Sales Order Creation
Hi Experts,
While creating the Sales Order once i enter sold-to-party and enter line item, i have to check the customer against the sales order type.
Please suggest me if any user-exit or enhancement or BADI available for it.
Thanks & Regards,
-VMHi
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
mark if helpful
Regs,
Tushar Mundlik -
User exit for checking Goods Receipt, Non-Valuated when creat po (ME21N)
Hi All:
I want to check the field of Goods Receipt, Non-Valuated when i create PO with ME21N.
It require as plant and Account assignment category
For example, plant A and account assignment category (K), I want to check it.
How can I do this?
Please help me.No need for any user exit , you can copy the account assignment category "K" and make your own , in that account assignment category you can tick "GR-Nonvaluated" , then whenever you create a PO with this category "GR-Non Valuated" will come ticked automatically.
Regards
Raviraj -
MIGO: user exit for checking batch number
Hello,
When using MIGO to do goods receipt (101 mvt) I need a user exit in each time a line is added to check the batch number entry. If the batch number is empty for certain materials issue a error message to the user.
Thanks,
Peterwhere is your problem then?
If you create batches automatically with 101 ,then each line will get its batch from SAP, no need to check if there something entered manually.
Why do you customize auto creation of batches, while you want the user to enter the batches manually?
can you give a bit more background? -
User Exit for checking GI in work order
Dear PP Gurus,
When user is doing confirmation for production order, system should check whether GI has been completed for that confirmation quantity. If not, system should prompt for eror message that GI has not completed.
Can anybody please tell that User Exit which can be used for this.
Thanks & RegardsHi,
For this purpose, we can use the below enhancement:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
you need to incoporate the logic..
refer below thread, may be useful..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva -
User exit for check/save/hold in Purchase order
>The client requirement is like this :-
>The client has development a Order Approval Form process and want the user to create all the purchase orders having value all inclusive value of Purchase order above Rs. 300000/-.
>The user should not be able to save/hold/modify any purchase order above Rs. 300000/- in normal SAP through tcodes ME21N, ME22N, ME23N.
>For this we need to use a user exit and flash an error message that PO value is above Rs. 300000/-, hence please process the purchase order in OAF.
>Can any one please provide details of which user exit to use for the above scenario.
>Thanks in advance
>AJBADi:ME_PROCESS_PO
Method: PROCESS_HEADER
PROCESS_ITEM
Or
BADi:ME_PROCESS_PO_CUST
Method: PROCESS_HEADER
PROCESS_ITEM
Call your ABAPer to do the same. -
User exit for checking Actual dates before TECO of WBS element
Hi,
Is there a user exit in PS we can use that checks to see if Actual dates have been entered on the WBS element before the WBS element is set to TECO?Hi,
I am not sure on this as i havent checked it. You can explore and check if defining validations can serve your purpose.
Best Regards,
Gokul -
BADI/User Exit for Checking Conditions in TRM Transactions
Hi All,
I have to check some conditions before saving the transaction FTR_CREATE. So that based on that condition it will be known that whether that transaction will save or not. I found some BADIs, but those are particularly working for Money market and derivatives. For my Req, I need a BADI which will check conditions for both Money market and Securities.
Exact req is, Based on Portfolio and PaymentAmount i have to restrict the transaction. Those will found in 2 tables VTBFHA and VTBFHAPO. But many BADIs doesnt contain VTBFHAPO.
If any one working on TRM can u help me out ?>
priya tavanam wrote:
> Hi Frds,
>
> I am using the FTR_TR_GENERIC Badi. In that one method is : EVT_TRANSACTION_SAVE_CHECK. In that one parameter is PI_PROXY_TRANSACTION. I want to get the attributes of Method A_TAB_CASHFLOW . That is : A_TAB_CASHFLOW~BZBETR.
-->whats ur code to read those values , it should be
lt_cashflow[] = PI_PROXY_TRANSACTION->a_A_TAB_CASHFLOW [ ] ' .
But i am unable to access this value in BADI. how access this. Can any one help me on this. -
User exit for VD03 to handle Payment Term (KNVV-ZTERM)
Hi,
I need to block a couple of Payment terms in VD03 ( KNVV-ZTERM )
For that i need to find an exit to handle data associated with KNVV.
Are there any exits available?
Regards,
RemiHi,
Thank you for the response.
I tried writting code in the exit :
EXIT_SAPMF02D_001. (Customers: User Exit for Checks prior to Saving)
DATA zterm TYPE dzterm.
"-- Block Payment Terms in SO --
SELECT SINGLE zterm
FROM zblkso
INTO zterm
WHERE zterm = i_knvv-zterm.
IF sy-subrc = 0.
MESSAGE e013(zmsg) WITH i_knvv-zterm.
ENDIF.
Set a break point to check whether it goes to that point when i try saving.
It does not even trigger.
I needed a point for KNVV much similar to form exit :
userexit_move_field_to_vbak.
Regards,
Remi -
User Exit for EA05 Transaction
HI,
I want a user exit for Releasing the Outsorted Invoice Document in EA05.
I need to put a Validation for the Posting Date and the Document Date which are showed as a Pop-up after Release Document is Clicked.
How do I find out a user exit for this requirement?This is a list of user exit for EA05. Check if u can find somethig useful.
EBIA0001 IS-U: User-Defined Fields in Billing Document
EBIA0002 IS-U: proration according to customer-specific dates
EBIA0003 IS-U: customer-defined checks in billing and overall check
EBIA0004 IS-U: Customer Exit for Ext. Calculation of Compressibility
EBIA0005 IS-U: Termination control of mass runs
EBIA0006 IS-U: period control - determin. of time portions in billing
EBIA0007 IS-U: customer-defined activities in billing reversal
EBIA0008 IS-U: customer-defined activities in billing reversal update
EBIA0009 IS-U: adjustment for move-in/out: to the day/month-based
EBIA0011 IS-U: Billing update
EBIA0012 IS-U: Fill Customer Data in OBJ billing object
EBIA0013 IS-U: Customer Checks in Billing Selection
EBIA0014 IS-U: Filling Customer-Specific Fields in Manual Billing
EBIA0016 IS-U: Determination of Billing Calorific Value
EBIA0017 IS-U: Individual Document Display
EBIA0018 IS-U: Customer conditions for backbilling line summary
EBIA0019 IS-U: Customer-Specific Invoice Comparison
EBIA0020 IS-U: Change Current Period for Dynamic Period Control
EBIA0021 IS-U: Change Billing Period for Dynamic Period Control
EBIA0022 IS-U: Change contract sequence for billing
EBIA0023 IS-U: Validations for Facts
EBIA0024 IS-U: Enhancement for Determination of Special Oper. Values
EBIA0025 IS-U: Determ. of Alternative Weighting for Measured Qtys
EBIA0026 IS-U: Postprocessing of Gas Factors
EBIA0027 IS-U: Enhancement Authority Check of Facts
EBIA0028 IS-U: Enter/Save Customer Facts in Billing Object
EBIA0029 IS-U: Permit Multiple Adjustment Reversal
EBIC0001 IS-U: Determine Evaluation Group for Consumption History
EBIS0001 IS-U: user exit for external prices (EBL)
EBIS0002 IS-U: Enhancement for rate type and rate fact group
EBIS0003 IS-U: reference values - integration of user-defined fields
EBIS0004 IS-U: front office output of historical consumption values
EBIS0005 User exit for transferring installation facts
EBIS0006 IS-U: Rate Category - Subscreen Inclusion and Field Check
EBIS0007 IS-U: User-Exit for Checking Prices
EBIS0008 IS-U: User-Exit for Checking Level of Calorific Value
EBIS0009 IS-U: Enhancement for displaying the currency in the facts
EBIS0010 IS-U: Enhancement for User-Defined Transport Control
EBIA0015 IS-U: Backbilling Customer Exit
Bye,
Gabriele -
PPCO0007 User Exit for Changing Header Fields During Order (CO40)
.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí HuertaHi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record. -
hi all
what we need is if the stock is available at other plants then the user should not able to create the PR
is there any user exit for checking the stock at all plant while creating the PR,Are you talking about stock materials? If it is stock material, normal practise is to create a reservation and not PR by manual creation.
Normally Purchase Requisition is created by Plant users. So they will just create the PR, as per their requirement, and they are not bothered about availability at other plants. It is the job of inventory controller to see whether any stock is available t other plants. If any such stock exists at other plants, then he will advise plant perople to cancel the PR or this PR can be converted to STO. So logically, we should not stop creating PR if stock is available at other plants.
Maybe you are looking for
-
Part content of a text field into two columns
Hi, I have a question regarding text field objects in Crystal Reports 2008 (SP3) for my ASP.NET app. I want the text object to have a maximum height and a column width. After the text object has reached the maximum height it should continue rendering
-
Which adapter plug in World Travel Adapter Kit is right for Argentina?
My father in law is off to Argentina with his PowerBook in tow. We know it can handle the voltage down there but I don't know which world adapter plug he needs as it's not listed as one of the choices in the World Travel Adapter Kit. Nothing for Sout
-
I am trying to download music from itunes to my ipod, I keep getting a verification required on my ipod before I can make a purchase. I don;t know where to go for this. I hit the OK button on my ipod, but nothing happens. Please can someone help?
-
SAP extract to Excel changed after migration from ECC5 to ECC6
Hi everyone, This issue is about getting a proper table when displaying SAP reports in Excel. When extracting to Excel, the data base is presented with summary yellow lines whereas we would rather have a regular table without subtotal. This issue ap
-
3d surface plotting in Labview (Mac version)
I would like to be able to do 3 d surface graph on as discussed in Document ID: 27GI5SG4. It appears that this works only in the Windows version of Labview. Is this function going to be ported to the Mac version or is there another way to produce the