User exit for check/save/hold in Purchase order

>The client requirement is like this :-
>The client has development a Order Approval Form process and want the user to create all the purchase orders having value all inclusive value of Purchase order above Rs. 300000/-.
>The user should not be able to save/hold/modify any purchase order above Rs. 300000/- in normal SAP through tcodes ME21N, ME22N, ME23N.
>For this we need to use a user exit and flash an error message that PO value is above Rs. 300000/-, hence please process the purchase order in OAF.
>Can any one please provide details of which user exit to use for the above scenario.
>Thanks in advance
>AJ

BADi:ME_PROCESS_PO
Method: PROCESS_HEADER
PROCESS_ITEM
Or
BADi:ME_PROCESS_PO_CUST
Method: PROCESS_HEADER
PROCESS_ITEM
Call your ABAPer to do the same.

Similar Messages

NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
THANKS/

Hi Malka,
It's possible set the system to mark automatically the delivery completed indicator.
First you need to set the under delivery and over delivery tolerances.You do this in customizing:
Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
Once you set this, you can insert this value keys on Material Master Record for the materials.
When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
Regards,
Rodrigo

User-exit for ME59 - Automatic creation of Purchase Order from Requisitions

Hi,
In ME59, is there a way to prevent PO of being saved, but instead created with the « hold » option?

Hi,
I tried this for ME59N and struggled.
I think EXIT_SAPMM06E_013 cannot change EKKO (it only imports it as the exit is for posting customer data) and BAdi ME_PROCESS_PO_CUST cannot change MEMORY because method SET_DATA uses mepoheader (and later mepoheaderx).
Check the two structures in SE11, in our ECC5 system mepoheaderx doesn't have field "memory" so the BAdi can work out its been changed (via method SET_DATA).
Even though lots of people have asked this question and the same exits/BAdi get highlighted I cannot see anyone confirming that they have managed to do it.
If anyone has then please share the details.
Thanks, Matt

User Exit for checking Purchase Requisitioner Field in CJ20N Transaction

Hi,
I want user Exit for checking Purchase Requisitioner field while making PR through CJ20N transaction. I have trie EXIT_SAPLEBND_001 user exit. Problem in this user exit is I am not getting Purchase Requisitioner No & Item No in I_CEBAN
structure.
Please suggest what to do ?
Regard's
Shabbir

Hi,
You can check with this BADI ME_PROCESS_REQ_CUST.
Kindly refer below mentioned link for further details:
Badi ME_REQ_POSTED For CJ20N Transaction
Hope this will help you.
Regards,
Mudita

User exit for checking the vendor emailid in me22n or me21n

hi all,
     can anybody suggest me a user exit for checking the email id of the vendor in me21n or me22n or me29n.
   plz suggest me a solution its urgent.

hi yaan,
       i checked with the user exit that u suggested me, it is getting triggered, i am able to check whether the vendor email id is present or not, but this is happening all the time that is even when the user dont want to send a email to the vendor i.e. he just wants to print the purchase order, even at that time this user exit is getting triggered and giving a message that the vendor email id is not maintained.
the reson why this is happening is there is no import parameter to this user exit which gives the "medium of data transfer" the user has entered. if i get this parameter visible inside the user exit, then i can check this parameter inside the user exit and do the required operation.   i checked up with all the user exits in "me" package and even the other related packages but none of them is getting triggered,
do u know a user exit or badi which imports this parameter and also gets triggered at the time of creation of purchase order.
plz give me a solution.
regards,
santosh.

User exit at the time of saving purchase order

Hi experts
There are some plants for which we need to auto GR. Is there any user exit available which will check these plants in PO at the time of saving PO document and do auto GR.
Regards

Enhancement
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MM06E011                                Activate PReq Block
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
M06B0003                                Number range and document number
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
User exit for me21n

CK11N User exit for valuation strategy sequence Price Purchase info records

Hi,
When ck11n is executed for a particular material whose purchase order is created then only price from purchase info records is considered. As the sub strategy selected is purchase order price via condition table.
Requirement: CK11N should consider purchase info record even if there is no purchase order against that material. As the check of valid agreement is done outside SAP.
Can anyone sugest a solution ? eg any user exit
BR,
Ameya

Hi
I lost my notes on this somewhere.... Just to refresh my memory - Can you tell me whats the difference between Net Quotation price, Gross quot Price, eff price from Quotation and Quot price via cond table
I compiled it actually, but lost it somewhere
br, Ajay M

User exit for checking creation of prod. order reference to sales order?

Hi all,
What are user exit suitable for checking creation of prod. order reference to sales order to have the same plant. If plant not the same, an error message should appear.
thanks.

Hi,
user exits:
PPCO0003 Check exit for order changes from sales order
PPCO0007 Exit when saving production order
Regards,
Vivek

User Exit for MIGO Save

Hi Gurus,
I am looking for user exit for MIGO transaction. User exit should be given after saving the material document & I need this document number for carrying out some updations.
regards,

Hi
You need to use the BAdi MB_DOCUMENT_BADI.
This BAdi has two methods
MB_DOCUMENT_BEFORE_UPDATE
MB_DOCUMENT_UPDATE
The method MB_DOCUMENT_BEFORE_UPDATE is called up before the FI document is created. This means that it is called up even if the program is terminated by an error during the subsequent processing. The update of data in separate tables should always be contained in function modules that are called up with the addition 'in update task'. This ensures that all the data is updated consistently.
The method MB_DOCUMENT_UPDATE is not carried out until update. This means that all updates are carried out immediately in their own tables and do not have to be contained in 'update task' in function modules. For performance reasons, you should not re-read the tables or carry out any time-consuming routines at this point.
You should always call up MB_DOCUMENT_BEFORE_UPDATE before MB_DOCUMENT_UPDATE, particularly if time is a critical factor when posting the material documents. The method MB_DOCUMENT_UPDATE is processed after the FI document numbers are called. As a result, no other FI documents can be posted until this document is completely updated.
hope this helps...
Thanks & Regards
Kishore

User exit for updating delivery block of Sales order before Delivery

Hi Folks,
Need to have an user exit for updating Delivery Block indicator for a Sales order Before creating its delivery
I have got an exit in Program SAPMV45A
MV50AFZ1
FORM USEREXIT_REFRESH_DOCUMENT.
that hits before processing the delivery block fro delivery (Correct me if i m wrong with this )
Now i want now how to change the Delivery Block indicator of Sales order in that exit
any FM available ?
Thanks n regards
Sonal...

Hi ,
How did you solved this issue?
I am having similar scenario in which while pressing the save button delivery block should update if multiple schedule line exist.
Tried by two different approaches in various user exit without any success.
AFAIK we have two ways to achieve this functionality.
1) Count the no of rows in vbep. If greater than 1 then multiple schedule line exist and we can assign the value to VBAK-LIFSK(delivery block) as per our requirement.
This is not correct. If there are two line items both with single schedule line . This case total no lines in vbep will 2 and above condition will true which is incorrect.
2) There is a indicator for multiple schedule line (VBAPD-EPMEH , xvbap-epmeh ) if it is check then multiple schedule line exist and we can assign the value to VBAK-LIFSK(delivery block) as per our requirement.
If I write code in USEREXIT_SAVE_DOCUMENT_PREPARE.
Multiple schedule line indicator is not populate so can not use 2nd approach.
If I write code in USEREXIT_SAVE_DOCUMENT it of no use as vbak is updated before reaching this user exit.
If I write code in USEREXIT_MOVE_FIELD_TO_VBAK as this user exit is also called while pressing the enter key for this I have use
the condition of fcode but it also fails in some condition.
If fcode eq 'SICH'.
Read table xvbap with key epmeh = 'X'.
IF SY-SUBRC = 0.
VBAK-LIFSK = '03'.
Else.
VBAK-LIFSK = ' '.
Endif.
Endif.
Please help me to get the desired functionality working for all cases.
1) One line item with multiple schedule line
2) Two line item with multiple schedule line
3) One line item having one schedule line and second one having multiple
4)Two line item both with single schedule line.

User exits for delivery picking confirmation and transfer order creation

Hi
We have a scenario for which we need help.
This is to do with replenishment from plant to plant.
We have sales sets.
The sales sets needs to be replenished from one plant to another. We want the componenets of the sales sets to picked from the issuing plant. For this we need a transfer order. this needs tobe confirmed and then the goods issue should take place from the issuing plant. Its a two step process.
we are doing Sales sets in STO. The explosion takes place in STO. However when we create deliveries for this. Only the sales set header item without its components are flowing into the delivery.
The Tranfer order does not contain the components either.
However post the goods issue we can create a TO with reference to the TR. This is is not acceptable because we want the picking and confirmation to occur before PGI from the issuing plant.
Could anybody help: We want the TO to be created with the components even though in the delivery only the Sales set header appears. Can u suggest a user exit in which when we create the TR from the delivery the components of the set.
After confirmation of the TO then we want the picking status to be put as C.
Supreeth

Hi,
Check the following users exits.
MWMRFSSG            user exit for sorting TOs in RF system-guided transaction
MWMRFUP             Customer defined general purpose pushbutton called from scr.
MWMRP001            Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
MWMRP002            Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
MWMRP003            Customer Exit for Replenishment using RLLNACH1
MWMRP004            User Exit for Replenishment using RLLNACH4
MWMTO001            Enhancements for end of transfer order generation
MWMTO010            Exit: Calculation of Total Planned TO Processing Time
MWMTO011            Correction of Planned Processing Time for TO Item
MWMTO012            Correction of Sorting and Split Transfer Order
MWMTO013            Stock Removal for Sev. Storage Types as in Stringent FIFO
MWMTOAU3            Separate selection of posting changes for autom.TO creation
MWMTR001            Exits at the end of transfer rqmnt creation (IM,PP interf.)
MWMD0001            Transfer order print via RLVSDR40
MWMD0002            Transfer order print as multiple process with RLKOMM40
MWMIDI07            Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11            Enhancement for message WMTORD: TO with several items
MWMIDO12            Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13            Extension for WMMBXY (subsequent tasks after goods movement)
MWMPP001            Enhancement WM/PP Interface (automatic TR generation)
Regards,
Murali

User exit for contract start date in sales order change mode.

24.10.2008
Hi Gurus,
I need to disable the 'contract start date' (VEDA-VBEGDAT) field in Contract data tab at header and item level. Can someone suggest a user exit for the same ???
Regards,
Udaynath

Dear Udyanath,
Please check these User exits with the help of ABAPer
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document
processing are listed below.
USEREXIT_FIELD_MODIFICATION
     This user exit can be used to modify the attributes of the screen
     fields.
     To do this, the screen fields are allocated to so-called
     modification groups 1 - 4 and can be edited together during a
     modification in ABAP. If a field has no field name, it cannot be
     allocated to a group.
     The usage of the field groups (modification group 1-4) is as
     follows:
-   Modification group 1:   Automatic modification with transaction
         MFAW
-   Modification group 2:   It contains 'LOO' for step loop fields
-   Modification group 3:   For modifications which depend on check tables or on other fixed information.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document
header level. It is described in the section "Transfer of the
customer master fields into the sales document".
The user exit is called up at the end of the FORM routine
VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document
item level. It is described in the section "Copy customer master
fields into the sales document".
The user exit is called up at the end of the FORM routine
VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of
the sales document schedule lines.
The user exit is called up at the end of the FORM routine
VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer
master fields into sales document".
The user exit is called up at the end of the FORM routine
VBKD_FUELLEN.
I hope this will help you,
Regards,
Murali.

User Exit for Enter / post invoice against the order without goods receipt

Hi,
My requirement is to enter or post the invoice against the Purchase order without goods receipt.
Need to an User Exit for this.
Thanks in Advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

User exits available are:
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
user exit when PGI is done
Reward if useful.

User exit for setting tax indicator in Sale order

Hi All,
I want to know if there is a way (user exit) that could look at the Sales Order Type , particular Item Pricing Condition and Ship-to party State and set the materialu2019s tax classification (VBAP/TAXM1) to u201C0u201D (Exempt) ?
Thanks in Advance!
Sonali.

Hi Ramesh,
I have put the code in the user exit, and I am able to set the tax classification indicator but I have a problem... Before setting the indicator I need to check for the Usage code of the line item (This code I am using instead of checking the Pricing condition) . I am able to read all the values of line item in VBAP structure in the user exit except for the first time this user exit is hit as soon as a line item is entered it is not picking up the Usage code. That field is blank.
But if add another line item and go into the user exit I can see the previous line item Usage code in XVBPA table.
Do you have any idea why usage code is missing in VBAP structure in the user exit or is there any other table or structure where I can get the usage code?
Thanks in Advance!
Sonali.

User exit for changing operation scap in PP order

Hi,
I want to know user exits for changing operation scrap in PP production order. Please help
Regards
Shalini

I could found only one at the moment...
QEVA0002 - Calculation of share of scrap in inspection lot
check if it is helpful.....else u can go on
CMOD - Utilities - SAP Enhancements - (Remove Maximum No of fields) - Execute (F8)
You will get all user exits.
Now i need points.... :)...My score is not gettin increased... lolz
kapil

User exit for check/save/hold in Purchase order

Similar Messages

Maybe you are looking for