User exit or everuthing else at save on project in CJ20N
Hi,
In CJ20N, I must change the value of PROJ-VERNR according to a value of a specific field (also specific field of the table PRPS) in the WBS screen when I save the project.
I would like to know if there's an exit user (or anything else : enhancement point, ...) to add some specific code when I save in CJ20N ?
Thanks in advance for your answers.
Hi,
Thanks for your answers.
The enhancement spot ES_SAPLCNPB_H works only if there's a network in my project. But some project have no network.
Is there an enhancement spot for the project level ?
Similar Messages
-
User Exit which runs after pressing SAVE button at VF01 Screen.
Dear all,
I need user Exit which runs after pressing SAVE button at VF01 Screen.
Kind Regards,If you search the forum, you can find plenty of threads on this, for example Re: Badi or user exit for VF01 while save Can you let the forum know what exactly you want to achieve using user exit during saving of a billing document?
Regards, -
User exit in Delivery after the SAVE button is pressed.
When the Delivery gets picked and Post Goods issued , the Delivery quantity for example instead of 48,000 LBS may be little less say 47,345 LB. We need to update this number in the order quantity which will originally have 48,000 LBS.
I need to update this quantity in the sales order VA02 after the delivery is saved. Whats the user exit AFTER the save button is pressed?
Thank you in advanceHi,
Check this User Exits related to Delivery,
Delivery related exits
V50PSTAT - Delivery: Item Status Calculation
V50Q0001 - Delivery Monitor: User Exits for Filling Display Fields
V50R0001 - Collective processing for delivery creation
V50R0002 - Collective processing for delivery creation
V50R0004 - Calculation of Stock for POs for Shipping Due Date List
V50S0001 - User Exits for Delivery Processing
V53C0001 - Rough workload calculation in time per item
V53C0002 - W&S: RWE enhancement - shipping material type/time slot
V53W0001 - User exits for creating picking waves
VMDE0001 - Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 - Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 - Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 - Shipping Interface: Message SDPACK (Packing, Inbound)
V02V0001 - Sales area determination for stock transport order
V02V0002 - User exit for storage location determination
V02V0003 - User exit for gate + matl staging area determination (headr)
V02V0004 - User Exit for Staging Area Determination (Item)MV50AFZ1 - User Exits for Delivery Processing
MV50AFZ2 - User Exit for Batch Quantity Allocation
MV50AFZ3 - LIPS-KOQUI (Picking is subject to confirmation) determination
MV50AFZK - The user exits in this include can be used to fill the condition tables for material listing and
material exclusion (KOMKG and KOMPG) and product selection (KOMKD and KOMPD) with own data.
MV50AFZL - In delivery creation process for sales orders there is the possibility to restrict the delivery creation to some order items.
If these order items are member of a delivery group, but not all items of
this delivery group are includes in the restriction range of the order item nubers, you can specify in this routine what to do.
MV50AFZP - This user exit can be used to modify change mode of pricing screens in delivery processing.
MV50AFZZ - Users Exit for Batch Determination; LIPS-LGORT determination
Thanks & regards,
Dileep .C -
User Exit/ BADI in vf01 after save
Dear Experts,
My requirement is to send the mail alert to customer when the billing document is created( VF01 ). Request you to suggest
the relevant user exit/ badi for the same which is triggered when the save button is pressed.
Thanks in Advance.Hi Farha.
Go to Ouptut type and the Driver Program related to VF01 output type ..
Go to se16>tnapr>enter output type already available-->see the Output type and form name.
Next go to se38> enter the Program name aatachned to Form> and at the end of the Pront privew write the code
to capture the spool Number and convert the spool data into internal table ( By using Function Module CONVERT_OTFSPOOLJOB_2_PDF) and next call the Funtion module SO_NEW_DOCUMENT_ATT_SEND_API1 SAPoffice: Send new document with attachments using RFC.
if you have problem go to se37-->enter CONVERT_OTFSPOOLJOB_2_PDF) and see where used list and find the Driver program how they are converting and sending the mail
Regards,
Prabhudas -
FIND BADI OR USER EXIT FOR TRANSACTION CORK -STEP SAVE CONFIRMATION
Hi all .
I need to find a badi or user exit to make some w/h movements on action "save confirmation"
in transaction CORK .
Please ,your help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
HelenaCONF0001 Enhancements in order confirmation
CONFPI01 Process order conf.: Calculate cust.specific default values
CONFPI02 Process order confirmation: Customer spec. input checks 1
CONFPI03 Process order conf.: Cust. spec. check after op. selection
CONFPI04 Process order conf.: Customer specific input checks 2
CONFPI05 Process order conf.: Cust. spec. enhancements when saving
CONFPI06 Process order confirmation: Actual data transfer
CONFPM01 PM/SM order conf.: Determine cust. specific default values
CONFPM02 PM/SM order confirmation: Customer specific input checks 1
CONFPM03 PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04 PM/SM order conf.: Customer specific input check 2
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
CONFPP01 PP order conf.: Determine customer specific default values
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
CONFPP05 PP order conf.: Customer specific enhancements when saving
CONFPP06 PP Order Confirmations: Actual Data Transfer
CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01 PS confirmation: Determine customer specific default values
CONFPS02 PS confirmation: Customer specific input checks 1
CONFPS03 PS confirmation: Customer specific check after op. selection
CONFPS04 PS confirmation: Customer specific input checks 2
CONFPS05 PS confirmation: Customer specific enhancements when saving
No of Exits: 24 -
User exit for VL02N when we save in the Tcode
HI Can any body tell me what's the exact user exit that will trigger when we save the transaction vl02n ?
Thanks in Advance
MaheshHi mahesh,
the userexit which ihave given is a standard one ,this needs access keys to write the code.
iam giving the path plz check it.
goto ->SE80->Give prog name SAPMV50A->Then expand the subroutines node u will find the USEREXIT_SAVE_DOCUMENT.
if u want to check whether its triggering or not put a breakpoint on USEREXIT_SAVE_DOCUMENT and change the existing sales order and press save button.It will be triggered.
Regards,
Nagaraj -
User exit/Badi in MIGO after save
hi all
I am trying to find a user-exit/BAdi in tcode MIGO.
This one should be called after saving the MIGO document.
Using this i want to put control over auto TO creation for some specific plants and storage locations.
Important thing is I am using version 4.6C.Hi,
Please try the last one. This may suit.
For "Automatic TO creation (background processing)", the following user exits are available:
MWMTOAU1 Selection of requirements for automatic creation of orders.
MWMTOAU2 Reference number assignment.
MWMTOAU3 Selection of posting change notices for automatic creation of transfer orders.
Thanks and Regards
Guru -
User Exit ME51N/ME52N/ME53N when save purchase requisition
Hi,
I want to validate purchase requisition data for release startegy. If there is no value for release startegy .Then ME51N/ME52N/ME53N populate a custom message before saving.
I have found the Enhancement MEREQ001.Can anyone help me to find the exit because there are 10 user exit for this enhancment.
Thanks in advance,
HarinderHi,
Follow the following steps to find the EXIT
1. Open transaction SE24.
2. Now open the object CL_EXITHANDLER in display mode.
3. Go to the method tab and double click on the method GET_INSTANCE.
4. Put a break point on cl_exithandler=>get_class_name_by_interface.
5. Now execute the transaction you want to find EXIT for, it will take you to the above method.
6. Write EXIT_HANDLER in fieldnames and hit enter, it will tell you the EXIT used for your transaction.
7. Hit F8 and it will tell you all the EXITu2019s for your transaction.
Now put break points in each user exit and check which one gets triggered for your transaction.
Regards,
Manish -
User-Exit/Badi for MD14 (At Save)
Good Morning
i want to an exit or badi for md14 when save planned orderHi ,
try one of those :
LMDR2001
LMDZU001
only two exits for the package MD , you should find the appropriate components there
Regards -
User exit for delivery IDOC on save
Hi,
I have found some exists for delivery IDOC fun mod 'IDOC_OUTPUT_DELVRY'.
when I am testing from WE19, the debugger is not triggiring.
Pl suggest.
Thanks,
KrishnaHi,
If you have the idoc no. get the partner details form it and go to we20 and put it there. and go to inbound parameters, and cleck on the message which your idoc belongs to. and go to the process code in it, and double click on it. where you can get the FM attached to it. put the break point there. opne your idoc from we19. click on the inbound FM. and place the FM. and click on debugger active check box and chose fore ground. it will take you to that FM. now debug that function module. in this process you may come across Exits you are looking for.
Hope this will helps you.
Regards
Kiran -
User exit at PO Save (ME21n)
Hello,
I want to change the valuation type of the Purchase Order item when I save a PO created via ME21n based on checks.
For this which user exit should I use? I tried EXIT_SAPMM06E_013 of enhancement MM06E005. But that didnt help.
I want a user exit which triggers when we save PO and should enable to change fields in item level. The saved PO should show the changed values.
Any thoughts??
Thanks
CMVhi
try
ME_PURCHDOC_POSTED
else
LFM2_DB_STRG
STOREGROUPING
LUMER_BADI_ROUND_INT
MD_STOCK_TRANSFER
ME_TRIGGER_ATP
CHECK_COBL_ADDON
ME_COMMTMNT_PO_RELEV
ME_COMMTMNT_PO_REL_C
ME_COMMITMENT_STO_CH
ADJUST_NET_DAYS
BUAVC_CHECK_RESTRICT
ME_CHECK_SOURCES
ME_CHDOC_ACTIVE
ADDRESS_UPDATE
ME_PURCHDOC_POSTED
EXTENSION_US_TAXES
regards -
Badi or user-exit for QA32 after save
I need a badi or user exit to execute exactly after save in QA32 ..I tried belows but they are not that i want
QPL1_SUBSCREEN_ADDON
INSPECTIONLOT_UPDATE
Check these Exits:
QEVA0004 Exit for changing information line in usage decision he
QEVA0005 User subscreen for displaying add. data for usage decis
QEVA0006 Entry to usage decision transactions
QEVA0007 UD: Control of compulsory comment or long text presetti
QEVA0008 Usage decision: Customer function key (e.g. to cancel U
QEVA0009 UD: Predefinition of quantity to be posted to sample st
QEVA0010 UD: Usage decision check
QLCO0001 QM: Call alternative costs report from UD
QSS10001 Possibility of calling a different print reportHello Tuncer,
have you checked the BADI QE_SAVE? This is the last possible chance of changing data on saving a QM transaction and should be active in QA32.
The only other solution I can come up with is a follow-up action i.e. for the UD-code
Hope this information proves usefull.
Regards
Isabelle -
User Exit at process order release or save
Dear experts,
Can any one help me which user exit will be useful at the time of process order release or save (t code COR1/COR2).
My requirement is to stop the process order release if there is any maintenance order is already released on that date.
Process order should not get released in between the start and finish date of PM order for the same equipment.
I could acheive this for PM side by using a user exit IWO10002, here if any process order is released for an equipment PM order cannot be released for the same equipment in between start n finish date of the process order.
Please help me out in finding the user exit for process order release / save.
Thanks in advence,
Regards,
Praveen.Hi,
The following enhancements are available for process order management:
For order maintenance:
o PPCO0006 to predefine entries for order header fields when creating
an order
o PPCO0001 to provide information at the time of saving (for
production orders and process orders)
o PPCO0007 to check or change header data when saving
o PPCO0002 to add additional checks that are to take place when
setting the deletion flag or deletion indicator
o PPCO0003 to prevent changes in sales order items that would cause
changes in the process order for static assembly processing
o STATTEXT to format the status line
o PPCO0008 to check components that have been changed or added
o PPCO0005 to change the storage location and the 'backflush'
indicator in the reservation
o PPCO0013 to change the priority of the selection criteria for batch
determination in production orders or process orders
o PPCO0014 to restrict the selection of process orders that are
offered when creating external relationships
o PPCO0020 to display additional information for another tab page in
the process order header
Regards,
Dhaval -
Save on user-exit for ME54 and ME55
I am stuck in ME54 and Me55. I have to find a save on user exit while releasing through this transaction.
The requirement is to validate the release code and its corresponding approver.
When save and release button is pressed then this exit should trigger.I have created one project and assigned the user exit that you suggested, and activated the project and exit.
I have put a break point in the exit to ensure that it works or not.When trying to execute the release and save button(me54) it does not stop at that break point.
Can you please tell me in detail that how to achieve it?. Is there any configuration to be maintained?.
Since it suggests that against that release code the workflow indicator should be 9.Please suggest.
If there is any other way round then also let me know. -
User Exit for ML81N at the time of save -- urgent
hello all,
I need to fill the field reference field in ML81N transaction with some value for this i need to find user exit i was able to find so many user exits for this transaction but i couldn't find the perfect user exit at the tiem of save,
Any pointers wouls be of great help..............Hi,
check these 2 threads.
User exit in ML81N
Urgent. Badi or user exit for ML81N transaction
Regards,
Maha
Maybe you are looking for
-
Simultaneous multi track recording in Logic Pro7 using MOTU 828 mk2
I would like to use the eight separate audio inputs on my MOTU 828 and connect them directly in line to eight channel strips/tracks in Logic Pro 7 v 7.2.1. (presumably through the firewire interface). I can't find any documentation in either the Lo
-
Have added 3 range expanders to my home network now i find airport express will stream to my hifi but it stops every now and then as though it is buffering, any suggestions?
-
Reader email not going to default email client
If I open up an article in 'Reader' in safari, then go to 'Mail this page' it opens up in the OSX Mail program. I use 'Sparrow' and have set this up as the default email client (I know this as I can go to the file menu and 'Mail link to this page' an
-
Install problem - v5 on Mac OSX 10.6
Mac OSX 10.6 and trying to install just Captivate 5. (This is not a standard Mac application install...) The pre-installer runs and reports ERRORS and will not allow the full installer to work. Only a brief hint on uninstalling any beta versions of C
-
How can i trace SQL from webpage
we are 3 tier structure, i want to know if i do some search in webpage, which sql was ran in database, i saw it in v$sqlarea and v$sqltext, but it seem strange and not all. and when i select sql_text from v$sqltext_with_newlines , the sql_text could