User exit to create template PPM

Help us to find the User exit to create template PPM.
The user exit need to have PPM type T so that when production version is CIF to APO , system will create template PPM.
Regards.

Please see if the user exits: EXIT_SAPMMDUSER_006 or EXIT_SAPMMDUSER_003 work for you.

Similar Messages

  • User exit while creating delivery (VL01N)

    Hi Experts,
    Is there any User Exit, While creating Outbound Delivery with reference to Sales order using VL01N,subitem cannot be created without the related H.Level item.
    So my requirement is:
    Check Higher Level Item (VBAP-UEPOS), If Higher Level Item value is set for an item, ensure that the related item that the Higher Level Item value refers to is also on the same delivery. If not, then issue an error that sub item cannot be created without the related HLI item.
    How to achieve this, Any user exit ? Help will be appreciated.
    Thanks,
    Ranjith.

    Hi,
    You may use Report ZNEGI16 given in below link to find out the user exits and BADIs associated with the above T code.
    How to find BADIs
    Kindly let me know if this was of any help to you.
    Regards,
    Shayeree

  • User Exit to Create Production Order when creating of Purchase Order

    Hi Guru's,
    I want to create the Production Order when creating the Purchase Order. i want to know is there any user exit exists for that??
    My scenario is as follows.
    we are converting the Purchase Requisition to the Purchase Order , while doing this we want to create the Production Order.. Is this possible??
    If possible how can we do that???Please suggest me the possible solution.
    Thanks in advance.
    Thank you,
    Adi.

    Teja,
    My Scenario is as follows.
    P1- Manufacturing Plant
    P2 - WareHouse Plant (Procures Material from P1 using STO)
    When we run the MRP in P2, it creates a Purchase Requisition, that Purc.Req is going to be convert as STO (Stock Transport Order) in P1 Plant.
    When converting the Purchase Req to STO, we need to create a Production Order in P1 Plant.
    we know that system will creae the Purchase Order only, is there any possibility that,For creating the Production Order is there any user Exit/BADI or any other procedure while creating the Purchase Order????
    Thanks,
    Adi.

  • User exit in create sales order

    Hi expart ,
    In sales order have 10 user exit . my requirement is n't satisfied in 10 user exit . Plz. tell me any idea my requirement is putting in sales order .

    Find the user exits below for Sales order.
    Transaction Code - VA01                     Create Sales Order
    Exit Name           Description
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    If user exists doesn't suit ur requirement then go for customer exit. Goto program MV45AFZZ then serch for Customer exists.

  • User exit for create delivery order

    hi! expert.
    i have a scenario when user B create delivery order (VL01N)  then get DO No.  I want to send this DO No. to user A 's mail.
    when i look for user exit with this  [program|http://wiki.sdn.sap.com/wiki/display/ABAP/FindEXITandBADIfroagivenTransactionCode]  . i don't know which one I should use.  please suggest me.
    V02V0001
    V02V0002
    V02V0003
    V02V0004
    V50PSTAT
    V50Q0001
    V50R0001
    V50R0002
    V50R0004
    V50S0001
    V53C0001
    V53C0002
    V53W0001
    VMDE0001
    VMDE0002
    VMDE0003
    VMDE0004
    my SAP  version is 4.6
    best regards,
    Kiitisak

    Hi,
    Any userexit asks the access key for first time.(Not the case with customer exits). So no probelm. Get the access key from your BASIS team and implement the exit. I wonder that MV50AFZ1 is not implemented yet in your system. Is your SAP system new?
    This is the most busy exit (Locked by some one at any time) in most of the systems:)
    Thanks,
    Vinod.

  • User exit for creating/deleting vendor master

    Hello Gurus,
    I have this task that to update this customized transaction we have for the certification list of the vendors. What they want is every time that there is new vendor master to be created or deleted in XK01, the customized transaction we have for the certification list of the vendors should be updated. I am thinking to suggest  link the table LFB1 and LFA1 to the custo tcode we have to satisfy the business needs. Or any other suggestions? What are the user exits that can be use and link the creation /deletion vendors to my customized program? Technical team is asking for the user exits but not aware of them
    Thanks!

    We have this customized tcode where we input the vendor and materialu2019s expiration date manually. Then client wants to enhance that custo tcode with features when creating and deleting vendor in XK01 transaction, the new vendors data will also be automatically updated the custo tcode we have before. Its like everytime there is new vendor created, the custo tcode we have before will be updated with the new vendor data(not automatically input) then if the vendor is deleted, the vendor entry in the custo tcode we have before will also be deleted.
    I found the user exit SAPMF02K but according to the technical team it is not applicable to our issue. Any suggestions or comments or other user exit that we can use to develop this new request wanted by the client?
    Thanks!

  • Bapi or user-exit to create warning in invoice

    Hi,
    I was askes to create a warning whenever someone pushes delete within an invoice (mir7). The problem is that our users are not aware, that they are really going to delete not only the marked position within the invoice but the whole invoice.
    I´ve tried to find a bapi or user-exit to place my coding but so far was unsuccessful, can anyone tell me if there is a badi or user-exit?

    Hi Ute!
    Try BADI INVOICE_UPDATE (hope this is defined in your release).
    It's help says:
    "You can use the business add-in (INVOICE_UPDATE) to further process the following functions or, if necessary, forbid them:
    Creating invoices (invoices, credit memos, subsequent debits, subsequent credits) in Logistics Invoice Verification
    Parking documents in Logistics Invoice Verification, and making changes to these documents, for example, deleting them"
    -> Exactly what you are looking for.
    Regards,
    Christian

  • PA30 User exit for Creating work tax area

    Hi all, 
    I have a requirement to create a work tax area for personnel with allocation percent is allowed more than 100% for two particular tax areas. 
    For this I tried to use the user exit EXIT_SAPFP50M_002. In that user exit I have written the condition if the tax area is one of the two areas and the allocation percentage is greater than 100% then skip the validation it is doing currently.  But this user exit is not called when I run the program. I ran in the debug mode to see if it is called. But it is not called.   
    Currently if I enter allocation percentage greater than 100% then it will fire a dialogue message box saying “Work percentage cannot be greater than 100% Change existing records”.
    So I am wondering if it is the correct user exit to use.  Can you help? 
    Thanks for the great help. 
    Sobhan.

    Hi sobhan,
    1. ideally, this is the correct exit.
    2. for all infotypes, on saving,
       this is called.
    3. to check,
       just give some MESSAGE statement
       (without any If or without any logic
       and without any checking of infotype)
    4. From that we will come to know,
      if this is really getting called or not.
    5. Also make sure, the PROJECT (CMOD)
      is activated for this enhancement.
    regards,
    amit m.

  • Wich user-exit  for Creating Vendor I must use?

    Hi, experts
    I have a requiriment on T/C XK01 & XK02 when customer is creating or modifying Vendor; it is when user put value on screen field <i>"Payment Terms"</i> (<b>LFB1-ZTERM</b>) this values must be same on next screen "PURCHASING DATA" on screen field "<i>Terms of paymnt</i>" (<b>LFM1-ZTERM</b>).
    Which user exit do I use for this ( RFKRRANZ/SAPMF02K )?
    Where to check  value on screen field "Payment Terms" ( RFKRRANZ/SAPMF02K )  ?
    I will appreciate any helpfull information, as soon as possible, thanks in advance.
    Regards,
    mgg
    P.D. Points reward

    Hi,
    Why do you need user to input if you can copy automatically the value ZTERM from screen purchasing data into ZTERM in accounting screen? You can also pop up a message if user's selected value in accounting screen is different from  purchasing data.
    DATA: WA_STRUC(100) TYPE C,
          WA_LFB1 TYPE LFB1,
          WA_LFM1 TYPE LFM1.
    FIELD-SYMBOLS: <FS_LFB1>, <FS_LFM1>.
    WA_STRUC = '(SAPMF02K)LFB1'.
    ASSIGN (WA_STRUC) TO <FS_LFB1>.
    WA_LFB1 = <FS_LFB1>.
    WA_STRUC = '(SAPMF02K)LFM1'.
    ASSIGN (WA_STRUC) TO <FS_LFM1>.
    WA_LFM1 = <FS_LFM1>.
    WA_LFB1-ZTERM = WA_LFM1-ZTERM.         "<-- change here
    or
    IF WA_LFB1-ZTERM <> WA_LFM1-ZTERM.
    * pop up message
    ENDIF.
    <FS_LFB1> = WA_LFB1.                   "<-- change here
    UNASSIGN <FS_LFB1>.                   "<-- change here
    Regards,
    Ferry Lianto

  • Regarding creation event in user exit for create customer

    hi gurus,
    in user exit how to create event for create customer
    regards
    vijay

    Hi
    Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
    1) Goto se24 (Display class cl_exithandler)
    2) Double click on the method GET_INSTANCE.
    3) Put a break point at Line no.25 (CASE sy-subrc).
    Now
    4) Execute SAP standard transaction
    5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
    6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
    7) This way you will find all the BADIs called on click of any button in any transaction.
    mark if helpful
    Regs,
    Tushar Mundlik

  • User exit to create change pointer as soon as network is created(CN21)

    Hi All
    I have to use function module change_pointers_create_direct . This function module i have to use in a exit which is called as soon as a network record is created(CN21).
    Then I will use SMD tool to track changes made to these pointers.
    can anyone tell me which user exit can I use for this?
    Or do anybody have idea whether CN21 creates change documents by default or not in CDHDR.
    Actual requirement is to send the network records to third party system through IDOC using program RBMIDOC which is scheduled every 15 minutes. This program will read the change pointers created in 15 minutes.
    Please advise on this...

    hi,
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operation
    COZF0002            Change purchase req. for externally procured component
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indicator
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order header
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process order
    PPCO0010            Enhancement in make-to-order production - Unit of measure
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document links
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines
    regds,
    paras

  • User exit while creating delivery from sales order

    Hi Guys ,
    Is there any user exit in sales order which triggers when we try to DELIVER(from the menu bar) .
    My requirement is to not include some line items(base on some condition) before they are included in the delivery .
    Thnx in advance .
    Anil

    Hi Naimesh ,
    Thnx for your reply.
    I'm not sure of the functionality in VOFM .Can u please tell me how can i acheive my current functionality as explained above in my question .
    I'll tell u my requirement .
    When creating delivery , I have to check for some condition and depending upon this condition , the line items must not be included in the delivery .
    I have acheived this by BADI  LE_SHLP_DELIVERY~SAVE_DOCUMENT_PREPARE.
    if suppose any line items gets deleted in the delivery(based upon my condition) , and then if I look at the status of the slaes order(VA03) , it shows partially confirmed at the header level and the item which is rejected(in delivery) shows OPEN .
    Can u tell me how to update the status of the sales order header and item level (if any item is deleted) during creation of delivery .
    Thnx .
    Anil

  • User Exit manually created, needs to be activated

    Dear All,
    I am a PP consultant and in the absence of ABAPER here needs to do the following. Please provide your inputs.
    For MRP run material selection, I have created a user exit manually in PP-config. The help of this transaction says "User exist must be activated in the SAP externsion concept. The name of the extension is M61X0001."
    Please let me know what is this, where do i activate this and what are the codes that i write to choose the materials having certain MRP controller(MARC-DISPO).
    Thanks in advance.
    Sumeet
    P.S. > The config is done in SPRO>PRODUCTION>MATERIAL REQ.PLANNING>PLANNING-->uSER eXIT.material selection for planning run.

    Hi Summet,
    See sumeet, u see the definition of user exit in Tcode SMOD.
    So goto Tcode SMOD->M61X0001. Once u enter into it, click on components on application toolbar. Then u can find 2 Function modules.
    EXIT_SAPLM61C_001
    EXIT_SAPMM61X_001
    Goto Tcode CMOD to implement the user exit. So goto Tcode CMOD->ZM61X0001->create and add M61X0001 to ur implementation.
    Now write the required code in these function modules, and then click on Activate Project to activate the user exit.
    Try this and get back to me incase of anu queries.
    Dont forget to reward points if found useful.
    Thanks,
    Satyesh

  • Search user-exit for create purchase order

    Hi all,
    i'm searching the user-exit (or BADI) for create purchase order.
    Thanks for help.

    Hi CECG,
    GOTO SMOD and press F4
    then Click on  Information system
    and in the Package name give as     ME
    and press enter.
    you will get all user exits for Purchase Orders
    Hope this solves your problem.
    Please reward points if found helpful.
    Thanks and regards,
    Rajeshwar.

  • Accessing address in user exit EXIT_SAPMF02D_001 (create/change customer)

    Hi,
    I'm trying to access the address given for a new customer in user exit  EXIT_SAPMF02D_001. I need Street4, which is not available on the i_kna1 object, and therefore I'm trying to play with the i_addrhandle parameter.
    Can this be used with function module GET_ADDR to read addresses before the customer is saved, the following code gives me exception 1.
    ls_addr1-addrhandle = i_addrhandle.
    CALL FUNCTION 'ADDR_GET'
      EXPORTING
        address_selection             = ls_addr1
    IMPORTING
        address_value                 = ls_addr1_val
    EXCEPTIONS
       parameter_error               = 1
       address_not_exist             = 2
       version_not_exist             = 3
       internal_error                = 4
       OTHERS                        = 5
    Regards
    Mattias

    Hello,
    Address handle is used for internal communication in standard program..for the customer creation let's say it would store value like "KNA1                          ADRNR" and for vendor "LFA1                          ADRNR"
    Please use address number in ADDR_GET function module
    Thanks
    Krish

Maybe you are looking for