User exits are activating defaultly when i tried to activate one screen

Hi all,
i am trying use the enchancement MM06E005.
when i create a project in cmode and add one button to screen 201 , and trying to activate it, then all userexits and screen exits were activated and i am getting dump.
Can any one help me in this.
thanks,
murthy sannnidhi

What is the screen type you have given. It should be of subscreen type. Just see documentation of MM06E005 in SMOD
& check below part
If you use the enhancement, you must create and generate the following
dynpros (even if the dynpros are not going to be used):
o SAPLXM06 0101Subscreen header purchase order
o SAPLXM06 0201Subscreen header outline agreement
o SAPLXM06 0301Subscreen header RFQ
o SAPLXM06 0111Subscreen item purchase order
o SAPLXM06 0211Subscreen item outline agreement
o SAPLXM06 0311Subscreen item RFQ
Not sure but seems you have to create all screen given in the project so just try creating empty screen for other screen no. given.
Regards,
Pawan

Similar Messages

HT201359 I received two iTunes gift cards that were suppose to have $25 dollars each on each one from someone who owed me money, but when I tried to activate one it said it wasn't can you please help.

I received two iTunes gift cards that was suppose to be worth $25 dollars for each one for a total of $50 dollars, but when I tried to redeem the first one it said that it hadn't been activated,can y'all please give me a hand with this problem a friend gave them to me for money he owed me from a while back so please help me to activate these two cards. Thank You

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

User exit not active when saving sales orders

while creating a sales order (VA01) i need to update the storage location based on division . for this the badis and user exits are not triggering while creating a sales order for the above requirement
any solution........
<removed by moderator>
thanks in advance..
<Subject edited. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]>
Edited by: Mike Pokraka on Aug 7, 2008 8:38 AM

JVP,
MV45AFZZ this is the include which is trigger while creating SO.
use FORM USEREXIT_FIELD_MODIFICATION to write code.
your code look like if sy-tcode = 'VA01'.
update field.
endif.
Amit.

User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013

User profiles from Active directory when loggedin then userdisplay, useredit shows blank white screen in SharePoint 2013
I can login with the these AD users and AD direct import is working just fine. We are not using UPS.
With admin user when I click on the user it shows up proper data. But when I login with the same user it does not show me userdisplay/useredit and shows blank data. Also another strange thing is when I add new item in list with these AD users created by
modified by is blank and its really strange. I checked user information list, tried to rerun user sync with direct AD import option but no success.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
According to your description, my understanding is that the page is blank when the use accessed /_layouts/15/userdisp.aspx and the created by field was blank when the user created a new list item in SharePoint 2013.
I tested the same scenario per your post, however I cannot reproduce your issue.
For troubleshooting this issue, I recommend to verify the things below:
Check the permission of the user in the corresponding site collection to see if he can access /_layouts/15/userdisp.aspx.
Delete the user from AD and SharePoint, then re-add the user to AD and grant proper permission to the user in SharePoint to see if the issue still occurs.
Did this issue occur with all the users? Add a new user in AD and test the same scenario.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How to find out whether USER-EXIT is active or not

Hello!
How can I find out whether USER-EXIT is active or not ?
I set a break-point at these points and nothing happens
if I want save my daocument ???
Why
PERFORM USEREXIT_SAVE_DOCUMENT.
PERFORM USEREXIT_SAVE_DOCUMENT_PREPARE.
Ragards
Ilhan

Hi Ilhan
The easiest way, I guess, is by going to transaction SMOD, sticking in your enhancement name and pressing the test button.
When placing breakpoints, don't use <b>Breakpoints > Breakpoint at > Statement...</b> and enter
PERFORM USEREXIT_SAVE_DOCUMENT
because you won't get any hits since the function module names are stored dynamically.
Rather use <b>Breakpoints > Breakpoint at > Function Module...</b> and enter
USEREXIT_SAVE_DOCUMENT
for a better chance of hitting the breakpoint.
Cheers
Lyal
Message's terrible grammar was edited by:
Lyal Schumann

In ME21N,User Exit/BADI for Defaulting Vendor number at item level.

Hi Experts.
In ME21N, for every purchase order, we have condtion tab for each line item.
Many condition typesot taxes are listed based on the config for the materials.
My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
I need a user exit/BADI for defaulting the Vendor number.
Regards
Balaji R

Hi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu

Valuation price with user Exit on activity types

Hi All,
Our customer could have different activity cost for different products even if they are processed on the same cost center, same activity type and same activity time. So I wonder whether SAP has valuation price with user Exit on activity types as what on material valuation, when we select "U" in the relevant valuation variant. Could anyone knows advise please?
Regards
Walter

Hi Walter,
an idea might be to include an ABC template into the costing. ABC tempaltes allow a big degree of freedom in determinin which processes to use and in which quantities. To use the product as a cost driver is certainly not an issue. I doubt that you can directly influence the process 'price' to be applied, but to change the quantity could bring the same result.
See the docu for more info:
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/7e/cb7d1443a311d189ee0000e81ddfac/frameset.htm]
best regards,
Udo

User exit which gets triggered when a line item is deleted in va02

Hello all,
I am unable to find a User exit which gets trigerred when i delete a line item from va02.If I use the User Exits for saving data in Include MV45AFZZ the screen field VBAP-POSNR for line item is not getting accessed.All i need to compare the line item texts. Which means if any of these texts change then i need to write my logic. But the screen field name for all the texts is the same.Please guide me.

Hello,
Whever you perform any actions on the line item, we have the user exit in MV45AFZZ, userexitxvbap. Whenever the the item is deleted the UPDKZ value in XVBAP value is set to 'D', else since you are using the transaction VA02, any change is recorded in YVBAP(for old values) and XVBAP(for new values), so using this two internal table you can write any necessary logic.
BR
Sudhakar.

How to find whether user exits are used in the query or not??

Hi ,
I have to make the list of queris in which user exits are used.
Please any body help me how to find the queries in which user exits are used.
Thanks
Maruthi

Hi Maruthi,
Using table RSZGLOBV you can find out the queries that have customer exit variables.
Set filter VRPROCTP (processing type) = 3 means customer exit.
and the field COMPID will give you the Query name.
Best Wishes,
Mayank

How can we identify what are all user exits are there for sales orders,deli

Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel v

Hi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you

I have iPhone 3G with ios 4 but now i update new version and my phone is not working.it is not activating..when i tried it says please insert sim and try again..any one plez hepl.

i have iPhone 3G with ios 4 but now i update new version and my phone is not working.it is not activating..when i tried it says please insert sim and try again..any one plez help

Try this article if you haven't already
This is the only possibility that came to my mind when reading about your issue:
"If an iPhone, iPad, or iPod touch is not recognized in iTunes on Windows, the Apple Mobile Device Service (AMDS) may need to be restarted"

I cannot activate my ipad1, i already activated it but i just restarted it and then when i turn it on st says activation required, but when im trying to activate it. i cannot activate it.. i connect it to itunes but it cannot read its content..

i cannot activate my ipad1, i already activated it but i just restarted it and then when i turn it on st says activation required, but when im trying to activate it. i cannot activate it.. i connect it to itunes but it cannot read its content..

See Here and follow all the steps...
http://support.apple.com/kb/HT1808

A problem occurred when windows tried to activate. Error Code 0xC004E003

a problem occurred when windows tried to activate. Error Code 0xC004E003.
A few days ago my Windows 7 Ultimate x64 RC told me I am not genuine despite my getting the download and key from MS.
Entering a key now brings up the error message stated.
Any ideas?
I enclose the WGA Dump below:-
Diagnostic Report (1.9.0011.0):
WGA Data-->
Validation Status: Invalid License
Validation Code: 50
Cached Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-
Windows Product Key Hash:
Windows Product ID: 00447-321-7001067-70081
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7100.2.00010100.0.0.001
ID: {9668C401-CD36-498F-80E3-6CDA76F205DD}(3)
Is Admin: Yes
TestCab: 0x0
WGA Version: Registered, 1.9.9.1
Signed By: Microsoft
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7100.winmain_win7rc.090421-1700
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
WGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office FrontPage 2003 - 100 Genuine
OGA Version: Registered, 1.7.111.0
Signed By: Microsoft
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Users\The BORG\AppData\Local\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{9668C401-CD36-498F-80E3-6CDA76F205DD}</UGUID><Version>1.9.0011.0</Version><OS>6.1.7100.2.00010100.0.0.001</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-KGMM7</PKey><PID>00447-321-7001067-70081</PID><PIDType>5</PIDType><SID>S-1-5-21-2152136496-1664533313-3281826444</SID><SYSTEM><Manufacturer>Gigabyte Technology Co., Ltd.</Manufacturer><Model>965P-DS3</Model></SYSTEM><BIOS><Manufacturer>Award Software International, Inc.</Manufacturer><Version>F14</Version><SMBIOSVersion major="2" minor="4"/><Date>20090625000000.000000+000</Date></BIOS><HWID>AEB93607018400FA</HWID><UserLCID>0809</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>GMT Standard Time(GMT+00:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90170409-6000-11D3-8CFE-0150048383C9}"><LegitResult>100</LegitResult><Name>Microsoft Office FrontPage 2003</Name><Ver>11</Ver><Val>5EA9C3672EB0500</Val><Hash>GZD+9sfb5ecL3RxyV4F75a86u2M=</Hash><Pid>72079-640-0000106-55218</Pid><PidType>14</PidType></Product></Products><Applications><App Id="17" Version="11" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7100.0
Name: Windows(R) 7, Ultimate edition
Description: Windows Operating System - Windows(R) 7, RETAIL channel
Activation ID:
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00447-00140-321-700106-00-2057-7100.0000-2212009
Installation ID: 018441288775980420997375051901961760119443265545538935
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key:
License Status: Unlicensed
Remaining Windows rearm count: 3
Trusted time: 26/12/2010 06:58:17
HWID Data-->
HWID Hash Current: OgAAAAIABgABAAIAAAACAAAAAQABAAEAeqiEJpxoPi8IhcKP+Kjs2O5wLvcQUJJCHP9MNlfQmtYqhQ==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
  ACPI Table Name OEMID Value OEMTableID Value
  APIC GBT GBTUACPI
  FACP GBT GBTUACPI
  HPET GBT GBTUACPI
  MCFG GBT GBTUACPI
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist

Hi CJS23
I edited your post to remove the product key information. Posting even partial product keys is not allowed on these forums.
The error code  0xC004E003 simply means that the Software Licensing Service reported that license evaluation failed.
Here is what you need to do.
1. Press the WINKEY+R to bring up the Run dialog box.
2. Type SLUI 4 in the box and press OK. This will start the Telephone Activation Wizard.
3. Select your country in the drop down menu and click the Next Button. Follow the instructions on the screen.
If the telephone activation fails, stay on the line and an Activation Representative will answer and avtivate the system for you.
Hope this helps.
Thank You for testing Windows 7
Ronnie Vernon MVP

When Iam trying to activate the update rules

Dear One's......!
When Iam trying to activate the update rules Iam getting the error message as "Data fields already updated for InfoSource T_T07_O005 with MOVE"
Can any one kindly update me on the same?
Thanks in advance,
Raj

Hi,
this is not a error message but just a hint, a information, that you already have update rules from another infosource updating the same target which are updating the same fields. Just press enter and continue with activating.
regards
Siggi

O got "activateFailure" when I tried to activate zoneset after I added new zonings. it says "fabricChange".

I got "activateFailure" when I tried to activate zoneset after I added new zonings. it says "fabricChange".

We need more information
MDS, N5k, version ?
fc-alias, device-alias, enhanced zoning,.....
Topology
CLI output "show zoneset ....", "show active zoneset ....."
And the complete error message ? e.g. syslog

User exits are activating defaultly when i tried to activate one screen

Similar Messages

Maybe you are looking for