User exits of enhancement SAPMF02D

Hi all,
I need to add an extra input check to customer master. From SMOD I can see that enhancement SAPMF02D contains the user exit EXIT_SAPMF02D_001, but this exit doesn't seem to be triggered when entering/saving the customer data.
I've searched and found the user exit EXIT_SAPMF02D_800 in SE37, how can I implement this (as part of the SAPMF02D enhancement)? As it is now, I don't get any hits in the where-used-list for this function module.
All helpful answers will be rewarded!
- Mari Virik

Hi again, thanks for your reply!
I've added both EXIT_SAPMF02D_001 and EXIT_SAPMF02D_800 to enhancement SAPMF02D. Both function modules are active, and the Z-includes called in the funciton modules are created and activated. After setting breakpoints in these two incloudes, I run FD01/FD02 - but none of the user exits are triggered (the same applies if I run XD01/XD02).
What I need to do is to create an extra address input check, and I've also checked out BADI CUSTOMER_ADD_DATA, method CHECK_ALL_DATA. But I need to test the fields Street 2, Street 3, and Street 5 - and these fields are not available as input to this method.
To me it seems that neither the user extis nor the BADI can be used? Is this correct? If so, are there any other options? If they indeed can be used, what am I doing wrong?
All helpful answers will be rewarded!
- Mari

Similar Messages

Can't find user exit or enhancement at RGJVBR15

Hi everyone,
I need your help guys. Right now,i'm developed sapscript for billing statement (cash call and expenditure). I have finished the form but i have problem at print program RGJVBR15. This print program is called by RGJVBR10 (Tcode : GJ14 --> Hard Copy Billing).GJ 12 and GJ 13 is used to extract data that will be used by forms.
There is statement like this in RGJVBR15 at subroutine CREATE_EXPENDITURE (Line 1421 in include file RGJBF_I1) :
AT NEW C5_CURR. --> Group by funding currency
   PERFORM POPULATE_SPOOL_ID
ENDAT.
PERFORM F6100_PROC_... -> This will be used to open form,write form (sapscript)
AT END OF C5_CURR.
ENDAT.
The problem is that i want to change this logic. I want to change the standard logic (display report group by funding currency), i want to ignore this and instead using group currency. So there only one report produced with one currency only (if using standard logic there is more than 1 report based on funding currency). But i can't find user exit or enhancement in this SAP Standard Program. Is anyone know if there is user exit or enhancement in this program? I don't want to use implicit enhancement because it's will produce problem when client want to upgrade their system. Thank you.
Best Regards,
Satria

hi,
for tcode GJ14 user exits avaliables are
Exit Name           Description
JVA-IM-1             Joint Venture: Integration Manager Set Intercompany Lines
JVA_IM_2            User Exit Splitting
JVA_IM_3            User Exit Check Document
regards,
paras

How to know where the user exits or enhancement used in standard sap code?

Hi
I m pretty new to abap.
How can I know where the user exits or enhancement used in standard sap code?
As i have to add some functionality to the standard sap code. I m looking to search the enhancement or user exits used in this standard code wher i can add my functionality.
thanks in advance.
Moderator message : Search for available information, thread locked.
Edited by: Vinod Kumar on Oct 19, 2011 2:38 PM

Hi Henry,
I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
Srinivas

Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)

Hi all,
i am facing problem finding enhancement when creation of sales order of Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)
For refferenece:
When going to t.code VA03, select one item and go to extras in the menu bar and select costing then you find some amounts calculation i.e valuation price automatically.
So when creation of sales order i am giving material and that material price automatically takes from material master and creating sales order.
My customer requirement is to get the valuation price of the input material from Z-table during the sales order cost estimate.
This Z-table contains the material code, plant , grade of the material.
Ex:
Material         Plant   Grade Price
A                1000    XYZ     25000
A                1000    PQR     35000
A                1000    BCD     45000
Suppose it depends on sales document type and which grade price i have to take.
So first of all i am unable to find enhancement where to change this code to get change the valuation price.
Does anybody have any idea , is there any user exit/BADI/enhancement for this.
So please help me in this issue.
Thanks & Regards,
lokeshgoud

pls allow me to post the questions

User Exit or Enhancement for Material accounting document in VL02N at PGI

Hi,
I have 2 requirement at the time of PGI of Delivery.
1) Currently there are 2 accounting document getting created for 2 countries. i want to restrict acc. document creation for one company code.
2) I want to change the GL account in the accounting document while creation.
Could you please help me in finding any user exit or enhancement or BAdi or BTE which can resolve th eissue?
Thanks,

Hi,
GL account can be changed through the badi AC_DOCUMENT.
Use the the method CHANGE_INITIAL to change the GL account..
Regards
Aromal R

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

User Exit/BADI/Enhancement Point in VF01 after generating new billingdocno.

Hi Experts,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 after generating the new document no (Billing document no assign). The Billing document no is generating in the FM RV_INVOICE_DOCUMENT_ADD ( NUMBER_GET_NEXT).
Now the Billing document no is generating like '0000152', i want to concatenate 'ECR' to the generated Billing document no and it should be updated like ECR0000152 in Billing tables (VBRK, VBRP).
Kindly let me know is there any EXIT/BADI to achieve this functionality.
Regards,
Venu

Hi Venu,,
 These are the enhancements and badis for vf01, please check which will be helpful to you,,
<exit farm removed by moderator>
<points begging removed by moderator>
 Warm Regards
 Zulfikhar Ali
Edited by: Thomas Zloch on Oct 1, 2011 3:57 PM

What are all the key words are not recommented in User Exit or Enhancement

Dear Experts,
Can any of one tell me, what are all the key words not recommended to use any of the User exit or Enhancement spots?
Regards,
Mohana
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Feb 22, 2011 4:10 PM

No Icon:Visitor
Student
Honor Student
Top Student
Tutor
Intern
Teacher
Grad Student
Master’s Graduate
PhD Student
Associate Professor
Professor
Distinguished Professor
Regents Professor
Associate Dean
Dean
Provost
FONDA X. COX, PhD

Re: Difference between user-exits and enhancements

Hi ,
Can any one explain the difference between user-exits and enhancements with an exmpale.
I will give u full points.
thanks&regards,
Bhushan-karra.

Hi,
User exit - A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks. *-- Mani
The following document is about exits in SAP :-
The R/3 enhancement concept allows you to add your own functionality to SAPs standard business applications without having to modify the original applications.
SAP creates user exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
Types of Exits
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
Check these links for more details -
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1978b543b111d1896f0000e8322d00/frameset.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://sap.niraj.tripod.com/id21.html
If this answers your question, please close the thread.
Check this link also,
https://forums.sdn.sap.com/click.jspa?searchID=5924777&messageID=3801056
Thanks,
Reward If Helpful.

How to find the exact user exit in enhancement.

Hi All,
I am in learning phase. I am working on TCODE VA01 and want to change the PO Date. But i am unable to find out the exact user exit. If somebody could guide me that what is the procedure to find the exact user exit for a perticular field or like that. I am know how to find all the enhancements in the TCODE.

hi
Run this program and give the tcode and it will list down all the user exits for that Tcode.
REPORT z_find_userexit NO STANDARD PAGE HEADING.
TABLES : tstc, tadir,            modsapt,            modact,            trdir,             tfdir,      enlfdir,     tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
SELECT SINGLE * FROM tstc    WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir       WHERE pgmid    = 'R3TR'         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir          WHERE pgmid    = 'R3TR'            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir      INTO TABLE jtab      WHERE pgmid    = 'R3TR'        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct      WHERE sprsl EQ sy-langu        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',    20(20) p_tcode,    45(50) tstct-ttext.    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,      2 'Exit Name',      21 sy-vline ,      22 'Description',      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt        WHERE sprsl = sy-langu AND        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,   2 jtab-obj_name HOTSPOT ON, 21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
     SKIP.
     FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards
Sajid
Edited by: shaik sajid on Jun 26, 2009 12:06 PM
Edited by: shaik sajid on Jun 26, 2009 12:10 PM

User Exit or Enhancement or BADI for CA03 & MM03

Hi Experts,
I had a scenario like validate the Material No for CA03 & MM03. When ever we give 'material no' in the MM03 or CA03 ans press
enter I need to validate that material no. I don't see any proper user exit or badi for these tcodes to validate material no.
I used this enhancement MGA00003 - EXIT_SAPLOMCV_001 - INCLUDE ZXMG0U08 my own logic which is
calling a RFC function module here. It send values to this FM in turn this FM is sending the values to (third party - thru WSDL) Proxy . Here I am having the problem. When we give material no in MM03 or CA03 and press enter this enhancement got
triggered and it is going into dump. in my custom RFC FM we have 3 methods in WSDL I.e. Connect,Query,Close. When ever
it comes to the statement 'Connect' this dump is triggered. I am unable to find the exact problem because in the debugging mode
it is not showing constantly in one place...if I run for first time it is showing at one point , for second time if I run it is showing
at some other place. I can't predict correctly like where exactly we r getting dump.
Can any one please let me know any other user exit or BADI or enhancement points... exist to vlaidate Material No.
Can any one please let me know the procedure how to do if enhancement points exists?
Error : RPERF_ILLEGAL_STATEMENT
Short text
    Statement "RFC-SYSTEM RFC_ID id RFC_VALUE value" is not allowed in this form.
Error analysis
    There is probably an error in the program
    "SAPLSHTTP".
    The program was probably called in a conversion exit
    or in a field exit. These are implemented by
    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or
    USER_EXIT_xxxxx_INPUT.
    Conversion exits are triggered during screen field transports or
    WRITE statements, field exits during field transports from the
    screen to the ABAP/4 program.
    In this connection, the following ABAP/4 statements are not allowed:
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTION
    - SUBMIT
    - MESSAGE W... and MESSAGE I...
    - COMMIT WORK, ROLLBACK WORK
Thanks in Advance,
Yamini.

Hi,
How did you resolve that issue?

Purchase order user exit / BADI / Enhancement points

Hello experts,
Please Help me to get the user exit or any way to enhance the PO functionality. I am trying to set the PO line item status to "Blocked" or "Unblocked" whenever a change is triggered in PO line item for transactions Me21N / Me22N. The blocked status will be triggered by the custom enhancement, this is the requirement.
Thanks in advance for your help.
I tried the user exit MM06E005, but not working.
- Nagarajan

Hello Nagarajan Ramudu,
inside of MM06E005 you should try the function module EXIT_SAPMM06E_012,
i'm using this user-exit from all things in my company.
Regards,
Welinton Rocha

Reg :- For Updating WBS in MIRO (any User Exits or Enhancements)

Hi,
I have a requirment while doing MIRO,
I am selecting 'Calculate Tax' Checkbox to update G/L accounts specified for a particular TAX code in the MIRO Screen simultaneously I want to update WBS element for that G/L accounts specified in the TAX code in MIRO level.
Can anyone suggest any Enhancements or User Exits available for this else provide solution for this.
With Thanks,
Dina

Hi,
have a look at badi INVOICE_UPDATE.
Best regards.

Need a user exit or enhancement point for loading start button in VT02

I have a requirement to write the code for loading start button and complete PGI as soon as loading start is checked in VT02(shipment transaction).
Please suggest....

HI Venkata,
Below are the user exits and BADIs in the transaction VT01
Enhancement
V56UNUMB                                Shipment number allocation
V56UDLUP                                Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UCHCO                                Check shipments are complete
V56UCHCH                                Shipment processing: Check whether changes were made
V56TDLIF                                Filter Delivery Items for Shipment
V56SLDET                                Shipment processing: Leg determination
V56MVT04                                Extensions for Collective Processing of Shipments
V56LOCID                                Shipment Processing: Determine Location Identification
V56LDELI                                Read Delivery Data for Shipment Processing
V56L0001                                Status of Shipments for a Delivery
V56FSTAT                                Shipment processing: Activities when setting a status
MV56AINI                                Initialization of transaction control for transportation
V56USTAT                                User-individual definition of transportation planning status
V56USVDO                                Update new objects for transport
V56USVDP                                Preparation for updating new objects for transport?
V56AFCCH                                Shipment processing: Check function code allowed
V56AGTAR                                User Exit for Filtering Shipping Unit Calculation
V56ARCHV                                Customer-spec. checks for archiving shipments
V56ATKTX                                Change the number of lines for text input in shipment
V56BMOD                                 Transportation processing: Field modification
V56DISTZ                                Shipment Processing: Determine Distance
V56FCOPY                                Shipment processing: Copy delivery data
Business Add-in
BADI_V56N                               User Exit Transport - Message Determination
BADI_LE_SHIPMENT                        BadI: Shipment Processing
Regards,
Radhika

Help in user exit and enhancement

hi expects,
can any body help me by providing me the enhancement and user-exist material.please help me

Hi Santosh
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program
SAPMV45A you will find ( Among other user exits):
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program
SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003.
*2. How to find user exits *
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD.
Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
*3. Using Project management of SAP Enhancements *
We want to create a project to enahance trasnaction VA01
- Go to transaction CMOD
- Create a project called ZVA01
- Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is already in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder.
Note that Sold-to-party now automatically is "2155"
for more information.
try out with this links:
[http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm]
Hope answered your question.
Reward if helpful
Thanks
abdul

User exits of enhancement SAPMF02D

Similar Messages

Maybe you are looking for