User form siezes to respond

Hi all
I have a user form which opens a user form from it. after closing the opened user form the remaining user form stops sending events (pressing the form's buttons doesn't call any event handled code in debug mode ). what could be causing the probelm?
appreciate the help
Yoav

Profile the controlling add-on to see what is going on. Maybe some exception
occurred. If you add-on is based on .NET you can use B1 .NET Profiler.

Similar Messages

Adding Columns to the matrix in SAP B1 user form using Visual studio 2010

Hi,
Using Visual studio 2010, I have created a SAP B1 user form( b1f ) with one matrix.Matrix is having 5 columns. Its working properly. Later, I want to add few more columns. Then I added columns to the matrix as I have created columns initially. But, it does not saves.
i.e, Whenever I run, In B1 I could see only old columns. Newly created columns are not showing.So, I closed the .net project and opened again. Created columns are not showing in visual studio b1f itself. So, I created again and saved. But, its not saving.I tried it many times.
What I am missing?
Any help is appreciated.
Thanks in advance,
Parvatha Solai.N

Hi Parvatha,
Are you using B1 Studio? Anyway try to clean the solution first then rebuild it. This would re-copy files to the output directory, that contain your changes.
Best regards,
Pedro Magueija

How to disable a Entire row in a Matrix in Find Mode (User Form)

Hi,
How to disable a Entire row in a Matrix in Find Mode (User Form)
Regards
Jambu

Hi,
Iam using Bubble event = false in click event but the matrix row
is allow to edit but we cant save the document in Find Mode That is fine.
What is my actual requirement is In find mode matrix Row not allow to enter the data .
For examble In ADD mode i enter the data in Three rows (Item Section - Matrix) and
save the document. Whwn i open the document in find mode the three row is not allow
to editable like the same functionality of PO, sales Order, etc ..
Regards
Jambu

OIM 11G-prepop adapters not able to read from User form

When I try to auto provision ldap account for users after creation of OIM record using GTC, the ldap provisioning doesnt happen. Basically the prepop adapters not able to read from Xel user form. I am stuck with this issue for a while now .
I tried remapping..ect etc..ntng helped.
None of the process form fields are getting prepopulated, when I hard coded avlue in prepop adapters for all the reqd fields in process form, proviosioning gets completed successfully.
Pls. help me with this.
Thanks.
~VSN
I get the below errorr:
<BEA-000000> <Class/Method: tcAdapterExecuter/executeRuleGenerators encounter some problems: java.lang.Exception: Error retrieving user info: User Login
java.lang.Exception: java.lang.Exception: Error retrieving user info: User Login
at java.lang.Throwable.<init>(Throwable.java:67)
at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(tcAdapterExecuter.java:205)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(tcPrePopulateUtility.java:1020)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(tcPrePopulateUtility.java:346)
at com.thortech.xl.dataobj.util.tcOrderPackages.computeProcessFormData(tcOrderPackages.java:901)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(tcOrderPackages.java:423)
at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(tcOrderPackages.java:177)
at com.thortech.xl.dataobj.tcOIU.provision(tcOIU.java:563)
at com.thortech.xl.dataobj.tcOIU.eventPostInsert(tcOIU.java:303)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2905)
at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(tcUserProvisionObject.java:283)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:591)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:104)
at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:35)
at sun.reflect.GeneratedMethodAccessor1831.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
at $Proxy284.execute(Unknown Source)
at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1035)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:644)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:686)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.notifyParentProcess(OrchestrationEngineImpl.java:828)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:771)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:674)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:705)
at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
at sun.reflect.GeneratedMethodAccessor2150.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy382.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Kevin,
For manual Proviosioning - It works fine.
It fails when I create user in OIM using flat file GTC . I have an access policy to auto proviosion that user with ldap.
As mentioned before, I notice none of the prepops on Ldap process form are able to read value from Xel user form.
Steps I tried Already:
1- Checking access policy
2-remapping process form adapters
Pls. let me know ur thoughts.
~VSN

Session Error - Cannot call getObject on :display.session on a user form

On an end user form I have a manager label.
The manager attribute in the user object holds the unique identifier but I must display the full name.
 
So I have the following code to go get the fullname:
 
<block>
<invoke name='getAttribute'>
<invoke name='getObject'>
<ref>:display.session</ref>
<s>User</s>
<ref>accounts[Lighthouse].sponsor</ref>
</invoke>
<s>fullname</s>
</invoke>
</block>
 
Now it does go ahead and display the fullname but at the same time throws the following error on the page:
 
ERROR:XPRESS exception ==> com.waveset.util.WavesetException: Can't call method getObject on class com.waveset.session.LocalSession ==> com.waveset.util.InternalError: ID not passed to ObjectCache.getObject
 
Since it is not a workflow I think I need to use the :display.session reference.
 
Is there another approach I could try? Do you have any suggestions?

You could also use the following for your session:
 
<invoke name='getCache'>
 <new class='com.waveset.session.InternalSession'/>
</invoke> 
But the biggest problem I see is the string value User. I think it needs the following:
 
<invoke name='findType' class='com.waveset.object.Type'>
 <st>User</st>
</invoke> 
Note: I used st instead of s to avoid a strikethrough.
 
If I'm not mistaken, your code could then look like this:
 
<block>
<invoke name='getAttribute'>
<invoke name='getObject'>
 <invoke name='getCache'>
 <new class='com.waveset.session.InternalSession'/>
 </invoke>
 <invoke name='findType' class='com.waveset.object.Type'>
 <st>User</st>
 </invoke>
 <ref>accounts[Lighthouse].sponsor</ref>
</invoke>
<st>fullname </st>
</invoke>
</block> 
Best,
 
Andy
 
AegisUSA
 
Denver, Co
 
"We are the Identity Company"

Want to add a prepopulated User defined field in create user form

Hi,
I have an entity adapter which will perform a pre-insert check on the user group of the user logged in to the oim.
If the logged in user belongs to a group say "IT ADMIN", another validation check will be imposed on the create user action performed by him.
If not from "IT ADMIN" group then create user action will be handled normally.
Now the catch is, how would I determine the group name of the user logged in from the adapter code I have written?
I decided to keep an User defined field "Created by" in the create user form which will be non-editable and auto-prepopulated with the group name of the logged in user. This way I will be able to map the variable field from the User definition drop down list while mapping the adapter variables.
May you please guide me how I can achieve this?
Would highly appreciate suggestion/inputs.

Thanks for all your replies!
However I am still in dark.
I tried to retrieve the groupname using tcUSerOperationsIntf. But iit tries to retrieve the group name of the user getting created.
Please note, the group name I want is not of the user yet to get created, but that of the user creating it i.e., the logged in user.
My requirement is to have this created_by field in the create user form already prepopulated with the group name of the logged in user.
So that I can put a check based on this field value in the netity adapter.
If the group is IT ADMIN then proceed with the validation.
Else no validation required.
In short, I want to know,how can I auto-prepopulate a UDF in Create USer form?

How to Populate Database values in OIM user form

Hi friends,
I have created some groups in OIM and I have created a new field in OIM user form. Now i want the group values visible as new field values.
How the database table values can be made visible in OIM field ..?
please help me in doing it
Regards
sri

Just follow this document and from fig 13 select LOV type as query.
http://docs.oracle.com/cd/E21764_01/doc.1111/e14308/conf_mangmnt.htm
Regards
Shashank

I am a macbook pro user form last 2 yrs, recently i upgraded to Mountain Lion from Snow leopard. Since then operational speed is a major concern. Now It has crashed so very badly that I am scared of my data.Please help me.

I am a macbook pro user form last 2 yrs, recently i upgraded to Mountain Lion from Snow leopard. Since then operational speed is a major concern. Now It has crashed so very badly that I am scared of my data.Please help me.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Standard and User Forms

Hi!, does anyone know where SAP B1 does have every single Standard Form and also the users forms?. I want to create a query that returns all the forms that SAP has and also the user forms.
Also, is any how or there is a way to know which forms are related to a SAP B1 module?
Thanks..... and greetings
Reynaldo

Hi Reynaldo,
the CPRF table contains some system forms but not all, because not all forms have matrix/columns.
i fear that for your problem doesn't exist a real solution - it's like i said in my first post: the primary information
of all forms is stored outside of database.
lg David

Hiding Password in OIM user form

Hi All,
I am trying to Hide the userID and Password from OIM user (create user) form as I am using entity adaptor to generate these and I dont want to enter vague values. I am successful in hiding User ID field by modifying formMetaData.xml, however, I am not able to find anything for Password/Confirm Password fields.
Please suggest.

For each attribute reference, you can specify whether the field is:
Viewable—By adding the attribute reference to the relevant section
Editable—By specifying a value of TRUE or FALSE for the editable parameter
Optional—By specifying a value of TRUE or FALSE for the optional parameter

Best way to link user form with user table

Hi all.
What is the best way to link an user form with a user table (with all of the functions, add, update...)? I have created a simple form, and the question is next:
depending the type object of the user table (document, master...) i have facilities to imlement the basic operations in the form? if i create an UDO i have the functions but i want to use the form that i created with a screen painter.
Thanks.

Hi again i want add a new comment please.
If i want do all functions (add,update...) of my form in my user table, and i want my user table is a type document? how can add new lines in my user table with objet type document? because when i make the instance i nedd to say what type of document is (item,order...) and when i do an add(), not add() in my user table. In what moment or how can assign that the add,update functions... affect in my table?
Thanks again.

Font size and user form

Hello,
I'd like to know if somebody find a solution for the font size issue on user form.
since BO 2005, the user can change the font size. the application will format all the controls of form with the good size.
However, the layout does not follow very well for user form.
If the font size is changed while a user form is open, the aplication will reformat it perfectly, the controls are bigger, and the distance between the controls are ok
But when the user form is open again, it keeps the distance and control size of the XML file but change the font size, so the layout is very bad, sometime the static text or the caption could not be read, so it's not possible to use the form as is.
I use XML to create form, I haven't try by code, but in my case, I can't use code because there are a lot of controls in the form.
Any idea if it's possible to call the Business One procedure to resize the form and its control (not only the font) ?
Thanks you

Try resetting the FontSize of all items (and columns) to the one you used for the design after loading the form.
I use a simple loop over all items and an inner loop for matrixes and grids to set the font size in their columns.
Now users can have a larger font, but the added forms will use the original design's font size.
This approach has some drawbacks:
- Added forms use a different font size
- Some of the controls will still get their size based on the system default font size
(checkboxes, drill-down arrays, headercolumns, perhaps more?).
- Focused item is not resized by this (so far I have been able to work around this).
- Changing the font size while the form is open, will break the design as the
font size does not change, but the control sizes do.
This is not an ideal solution, but it might give some help, until a better one presents itself.
If the users don't use a dramatically different font size, my form design work quite ok,
even with the drawbacks or at least it is better than nothing. It is a good idea to test
the form with different font sizes to make it more flexible.
Tero

Gaps appear in IE 6 browser window for hidden fields in Create User form

Hi,
I need an urgent input on this one.
I hid an OIM default attribute for users in the 'Create User' form by modifying clear_all_fields.js
The field is hidden from the 'Create User' page fine!
But if I open the page from Internet Explorer 6 it shows a gap in the place of the hidden field.
For Mozilla 3.0.5 the gaps are not appearing.
I tried removing these gaps by deleting the tags and the field in the clear_all_fields.js
or, by reducing the dimension of the spacer.gif in GenerateCreateUserForm.jsp.
But it reflected no change in the form look n feel.
The requirement is to hide the fields and not remove them.
Any suggestion as to what may be the way out?

Thanks for the update Leonard. This would be an extremely useful plugin. I've been looking for it on http://labs.adobe.com/technologies/ under the plug-ins tab but have been unable to find it. It wasn't even there in the Pre-Release Programs. Is it located somewhere else or with a different name? Please let me know.
Meanwhile, I've been trying to write my own VB script to get the button clicked. Here's what I've come up till now-
FindText
HiliteList.Add->CreateWordHilite->SetTextSelect->GetBoundingRect->PointToDevice
The last function seems to be deprecated. Also there's nothing to connect the text highlighted by findtext with HiLiteList.Add. I guess
I may have to use the JSO word search method.
Any advice, as always, would be much appreciated.

Can you create an image field in the form so a respondent can upload a photo to it?

Can you create an image field in the form so a respondent can upload a photo to it?

Use the File Attachment field to allow respondents to include a photo with their submission.
Regards,
Brian

Filter Data with Date range.Dates are selected in user form

Does anybody could help me to create a user form, that user could select the date and time from either calendar or other control button (from Userform control Toolbox) and the VBA code would filter the data on Excel SpreadSheet depending on input...
I want user to specify start time and the end time, that I would know the period of time which is on interest and filter the data depending on inputs...
This is part of my table on Sheet1:
ID Time
Products
ProdNoExit
8
04-06-2013 23:00
15
1
8
04-06-2013 23:30
205
1
8
05-06-2013 00:00
235
1
8
05-06-2013 00:30
587
1
8
05-06-2013 01:00
874
1
8
05-06-2013 01:30
155
1
8
05-06-2013 02:00
150
1
8
05-06-2013 02:30
258
1

How about this?
Right-click your tab name, and paste this code into the window that opens.
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
If Target.Address = "$A$1" Or _
Target.Address = "$G$1" Then
Range("Database").AdvancedFilter _
Action:=xlFilterInPlace, _
CriteriaRange:=Range("Criteria"), Unique:=False
End If
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

User form siezes to respond

Similar Messages

Maybe you are looking for