User is not getting access after providing him db_owner also in SQL 2000 SP4

Team,
I have one instance of SQL 2000 SP4.
On this, one user wants access to update / drop user defined table.
I have given him db_datawriter & db_ddladmin role but he is still not able to perform his operation ( update or drop)
Server: Msg 229, Level 14, State 5, Line 1
DELETE permission denied on object '<Table>', database '<DB>', owner 'dbo'.<Server_Name>
Also given individual update/drop on some tables, but still error.
Finally, given him db_owner also but no success.
Anybody .. what could be issue ??
Chetan

Can you check if there is any DENY for that user?
If there is DENY then it will outwiegh.
Can you run
sp_helprotect
and check if the permission is properly given and if there is any DENY?
http://technet.microsoft.com/en-us/library/aa933420(v=sql.80).aspx
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Similar Messages

LAN was down ie Users are not getting ip from DHCP server after enabling DHCP snooping

Hi All ,
Enclosed file has network connectivity diagram.
1. L3 vlan's ie 2,3,4,5 and 6 are configured on ACC-CR1 and ACC-CR2.
2.Trunk is configured between Core switches ( CR1 and CR2) and access switches .VTP mode is transparent on all switches.L2 vlans are configured on all access switches.
3.DHCP is server is located at different location and is reachable over MPLS.
Without enabling dhcp snooping , users connected to access switches (Sw1,sw2,sw3 and Sw4 ) are getting ip address from DHCP server without any problem and everything is working fine.
But users connected to Sw3 and Sw4 are getting ip address from rouge DHCP server which is not pingable from any one of the switch.
So we have configured DHCP snooping for all vlan's on CR1 , CR2 , SW3 and SW4 and "trusted uplink ports" which are connected to WAN routers from CR1 and CR2 and also "trusted uplink ports " of Sw3 and Sw4 which are connected to CR1 and CR2.
As soon we have enabled DHCP snooping and trusted respective uplink ports , users are not getting ip address from remote DHCP server and even users connected to Sw1 and SW2 are facing same issue.
Note : DHCP snooping is not configured on SW1 and SW2.
Why users are not getting ip address from remote DHCP server as soon as we enabled dhcp snooping on Core switches and two access switches ie sw3 and sw4 ? what could have caused DHCP packets to be dropped ? Any idea would be appreciated .

Hi,
as you say: " HSRP is configured between CR1 and CR2 and Vlans are active on CR1" does it mean there are L3 intrefaces configured in each VLAN on your CR switches and ip hepler-address pointing to the remote DHCP server is configured on each of them?
I know it's difficult in a productive environment but IMHO you need to find out where are the DHCP offers dropped.
Either by enabling DHCP debugging or by capturing packets via Wireshark, e.g.
Best regards,
Milan

Production Reporting out put not getting deleted after 30mins what we set.

Hi,
This issue regarding Production Reporting. In the workspace the report output not getting deleted after 30minutes (while publishing the report settings were like delete after 30 mins). Any suggestions please .....
Thanks
Venkat

Hi Deepak,
Please chek the field / value which u have changed is relavant to printouts of the change.
You can check with following path
SPRO> MM > Purchasing > Message > Fields Relevant to Printouts of Changes.
Confirm tick is provided for PO ( P)
Vivek

While deploying to another server from RM client using build definition i got below error "Package location does not exist or deployer user does not have access"

We have installed RM client in the POC server .
Installed Deployment Agent in Dev server .
We created Configuration stages for POC->Dev.
We created a template with x copy deployer and selected source as build definition.
While releasing we faced following issue ,
The release was success in POC (Where RM client is installed), but in DEV environment (Which is different server)it got rejected because of the error
"Package location(Path) does not exist or deployer user does not have access"

Hi Dhamayandhi
There is quite a bit to do to get RM working successfully. I have a soup-to-nuts guide on implementing continuous delivery with TFS and RM
here.
Cheers - Graham
Blog:
http://pleasereleaseme.net LinkedIn:

"disp+work" process in not getting started after kernel upgradation

Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      55
M sid        TNG
M systemid   562 (PC with Windows NT)
M relno      7410
M patchlevel 0
M patchno    42
M intno      20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid        2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm)                         24288    (1104)
M DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
M DpShMCreate: sizeof(ca_adm)                           432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)                      0              (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)                         0              (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm)                       520080 (1016)
M DpShMCreate: sizeof(vmc_adm)                       0              (3208)
M DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm)          64
M DpShMCreate: sizeof(j2ee_adm)       3936
M DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M    pid = 2392
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    workerType = DP_WORKER_DIAWP
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M mode_cleaned_counter = 0
M    control_flag = 0
M    report = > <
M    action = 0
M    tab_name = >                              <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for                  64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
                              711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tng

C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB

Cisco Flex Connect and users can not get IP Address by WAN

Hello my name is Ivan
I have a wlc 5508 with license base to 50 aps, i use a deployment flex connect. I already registered all my access points, I use web authentication to authenticate users guest, and the service dhcp is in the central site.
My issue is the users in each remote site, can not get an ip address by dhcp from the central site, they can authenticate in the guest ssid, but any users can not get an ip.
The request is passing by the wan in this way
Central Site DHCP - Router WAN - Remote Site - Users with notebooks. I use flex connect central deployment (all the traffic consulting to the wlc) .
perhaps i should use local deploy? The wlc is in the central site.
Can you help me to resolving this issue please? , perhaps any advice?
Regards
Ivan.

Thanks Osita
If I configure Central Authentication and I configure central switching I need to create a dynamic interafce for each remote site and each dynamic interface associated with a different VLAN ID, because I can not associate a single interface dynamic to the same VLAN ID, but in my case the client remote in each remote site have the same network segment with the same VLAN ID with the same SSID for guests. My goal is to configure web authentication with the local DHCP server at each remote site, will this work?.Each remote site have its own server dhcp.
If I configure authentication central authentication with central switching with web authenticacion as I set in my scenario?
My issues are the interfaces dynamics, because I have the same network to the customer guest with the same ID VLan in each remote site
Regards

Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

Hi tania184,
Have you contacted your email provider to make sure there are no problems on their end? If they say their email servers are working properly, check the outgoing and incoming mail servers entries on your iPhone to make sure both are entered correctly. Enter the outgoing mail server even if the account setup indicates that is optional.

Could not get access to download area on SAP Service Marketplace

Hi All,
When trying to download the SAP Mobile Execution for Motorola software in the download center in the Application and User Management work center, I get the following error message:
"Could not get access to download area on SAP Service Marketplace."
I have also search for this software in the Service Marketplace, but to no avail.
I was hoping someone could point me in the direction of where I can download this software, or ideally the cause and solution to this error message.
Thanks,
John

Hi John,
Issue might be due to incorrect data in the system i.e., license codes assigned to your contract may be invalid or expired or Contract/ order is blocked due to payment issues.
These information has to be checked in detail.
Please report a incident.
Thanks
Lokesh Sharma

Accidentally changed the path of the home directory and now I can not get access my profile.

before the way was /valumes/macintosh hd/igor but then i decided to remove a space between macintosh and HD then I restarted my mac and after reloading I can not get access my profile. Thanks for the helping.

Boot up holding command-r keys into your Recovery Volume and re-install OS X on the volume.
This will be an install "in place" and shouldn't effect any of your own data or settings.

Urgent help? for Standalone AP users are not getting ip addresses

Dear friends,
i have Cisco LAP1140 series access points and i wanted to use them as autonomous , so i converted their ios from light weight to autonomous to
c1140-k9w7-tar.124-25d.JA image.
my network senario is
CORE SW + Access SW + Access points
Core SW:
act as a dhcp server for wireless user
for WLAN vlan 16 is configured on it
configured dhcp pool here for vlan 16
Access SW:
access points are cooneted with it
and every switch port assign to vlan 16 that is connected to AP
Standalone Access Points:
connected to access switch and have assigned static management IPs from vlan 16 that i have excluded in DHCP Pool in core switch.
configure only one ssid and broadcast
both radio 5ghz and 4.2 ghz are up
i can ping the gateway from each Access point to core switch
but the users can not get the ip address from the ssid that is configured on APs.
below is the attached of configuration of the access point
please review the configuration and advise me where i have mistaken and what i have missing in the configuration?
please reply me ASAP because this is very urdent for me and your reply is very important for me
Thanks

Thanks for your reply Ven
actually i did not check that and it does make sence too may be problem with DHCP Scope
but you know why i did not check because there is an other scope on the core switch for Data users only the difference
of vlan numbers and names
but that data vlan users are getting ip addresses and connect normally to internet.
did you view the configuration that i attached with my 1st post?
if no please view it and advise me if i have any missing there.
further i ll check for DHCP in the morning to connect my laptop dirct with switch port to is that getting ip address or no.
Thanks

Adobe creative Cloud photshop cs 6 register user iam not getting COPY CSS options please help

iam adobe creative cloud photshop cs 6 register user iam not getting COPY CSS options even i have updated photoshop several times
still not getting this options please help
Thanks
Koushik

13.0.1 is the last version of Photoshop to run on Windows XP but it does not include the Copy CSS feature.
The Copy CSS feature was first introduced in Photoshop 13.1 (Cloud only) and higher.
http://blogs.adobe.com/jkost/2013/02/copy-css-attributes-in-photoshop-13-1.html
Photoshop 13.1 does not run on Windows XP. So your operating system is preventing you from upgrading Photoshop to 13.1+.
http://helpx.adobe.com/photoshop/kb/new-system-requirements-photoshop-131.html
If you plan to remain a Cloud member then you will have to upgrade to Windows 7 or Windows 8 (or get a new computer) very soon in order to run Photoshop CC to be released on June 17, 2013.

Chat user is not getting message from the other users

In my application when user [A] initiate the chat with user[B] , I am facing following issues
-          User[B] is not getting initiation notification so that I am unable to open chat pod for user [A] on user[B] application
-          Due to above problem , User[B] not getting any message sent by the User[A]
-          User[A] can send only one message and it is displayed on simple chat pod
when User[A]tries to send more then one message it is not displayed on simple chat pod but on the console I can see the messages
following is sample code
public function connectChat() :void {
_collectionNode =
new CollectionNode();_collectionNode.sharedID = NOTIFICATION_COLLECTION_NODE;
_collectionNode.connectSession =
this.connectSession;_collectionNode.addEventListener(CollectionNodeEvent.SYNCHRONIZATION_CHANGE, onSynchronizationChange,
false, 0, true);_collectionNode.addEventListener(CollectionNodeEvent.ITEM_RECEIVE, onItemReceive,
false, 0, true);_collectionNode.subscribe();
/*** @private
* Handles the creation of a collection node if it does not already exist
protected function onSynchronizationChange(event:CollectionNodeEvent):void {
if (_collectionNode.isSynchronized) {
if (!_collectionNode.isNodeDefined(START_CHAT_LIST) && _collectionNode.canUserConfigure(connectSession.userManager.myUserID)) {_collectionNode.createNode(START_CHAT_LIST,
new NodeConfiguration(UserRoles.VIEWER, UserRoles.VIEWER, true, false, true,false, NodeConfiguration.STORAGE_SCHEME_QUEUE));}
public function connectChat() :void{
trace('connectChat');_collectionNode =
new CollectionNode();_collectionNode.sharedID = NOTIFICATION_COLLECTION_NODE;
_collectionNode.connectSession =
this.connectSession;_collectionNode.addEventListener(CollectionNodeEvent.SYNCHRONIZATION_CHANGE, onSynchronizationChange,
false, 0, true);_collectionNode.addEventListener(CollectionNodeEvent.ITEM_RECEIVE, onItemReceive,
false, 0, true);_collectionNode.subscribe();
/*** @private
* Handles the creation of a collection node if it does not already exist
protected function onSynchronizationChange(event:CollectionNodeEvent):void {
if (_collectionNode.isSynchronized) {
//Creates the nodes if they don't exist
if (!_collectionNode.isNodeDefined(START_CHAT_LIST) && _collectionNode.canUserConfigure(connectSession.userManager.myUserID)) {_collectionNode.createNode(START_CHAT_LIST,
new NodeConfiguration(UserRoles.VIEWER, UserRoles.VIEWER, true, false, true,false, NodeConfiguration.STORAGE_SCHEME_QUEUE));}
/*** Checks if a chat is going to be started with this specific user
protected function onItemReceive(event:CollectionNodeEvent):void {
var item:MessageItem = event.item;
var openChatEvent:OpenChatEvent = OpenChatEvent.ToOpenChatEvent( item.body, OpenChatEvent.OPEN_CHAT );
switch (item.nodeName) {
case START_CHAT_LIST:
trace("Starting Chat Notified");
if( openChatEvent.userId && openChatEvent.userId == this.connectSession.userManager.myUserID ){
this.dispatchEvent( openChatEvent );
if( this._collectionNode.isSynchronized )
this._collectionNode.retractItem( START_CHAT_LIST, openChatEvent.roomId );}
break;}
/*** Publishes a request for someone to join a chat
public function publishChatRequest(notificationEvent : NotificationEvent) :void {
if( this.connectSession.userManager.getUserDescriptor( notificationEvent.userID ) ){
var openChatEvent:OpenChatEvent = new OpenChatEvent( OpenChatEvent.PUBLISH_CHAT,null,notificationEvent.sharedID, notificationEvent.userNotificationList, null, notificationEvent.userID );
if( this.presenceUsers )openChatEvent.descriptors =
this.presenceUsers; _collectionNode.publishItem(
new MessageItem( START_CHAT_LIST, openChatEvent, openChatEvent.roomId ) );}
else{
Alert.show(
"User "+ notificationEvent.userID + " is not logged in.", "Publish Error" );}

A) are these methods copied twice in the code here on purpose?
   connectChat() and onSynchronizationChange is repeated in code due copy paste mistake
B) are both users subscribing to _collectionNode right away? Do each of them
get to onSynchronizationChange?
   Yes , each of them get to onSynchronizationChange
C) If you put a breakpoint in onSynchronizationChange, do you see the node
get created? Do you see it in the dev console?
Yes , it is creating a node
D) Is user B receiving an onItemReceive at all? Is user A?
Yes , it is creating a node
Now both the user getting chat message, have following issue
When user A initiate the chat with user B this action is not opening chat pod / window on user B end which shows user A has initiated chat with user B
But when user B click on user A name to initiate the chat, this action opens a chat window and user B can see message send by user A
Above scenario is not normal chat behavior in which other user gets the notification of chat . what could be the problem

Screen fields not getting displayed after Line 16

Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

You can't, you will need to get a new remote.

Java daemon on boot: "This user is not allowed access to the window system right now."

The daemon is located in /Library/LaunchDaemons/ and launches successfully on most occasions. However, it sometimes fails to start with this error:
Nov 17 20:36:24 server.local java[28972]: This user is not allowed access to the window system right now.
Nov 17 20:36:24 server com.apple.launchd[1] (net.java.server): Throttling respawn: Will start in 10 seconds
I have the server command running as a background daemon using its "nogui" option (the developers claim to have written it to not display a gui). However, it seems that somewhere along the line, Java is trying to display something. As the daemon is running before users log in, it gives this error. Once a user is logged in to the system, it runs fine; however, logging in a user to run the server is not an option. It needs to run on boot.
Any ideas for how to solve this? I'm going to contact the developers to see if it may be something they can fix, but I want to be able to force the issue in case the problem ever occurs in the future.

Irrespective of any claims by the developer, this certainly appears to be a test case that shows that the tool is not working as expected, and that the application has a bug. This test case would be better if there was some evidence around why only some of the startups fail, but in general this will involve what's been suggested earlier: "Contact the application developer."
As some general background on what's involved, see daemons and agents and related; processes that are not allowed to connect to the GUI for reasons of security.
I'd also suggest testing your DNS, as seeing "server.local" can imply local DNS configuration errors. Launch Terminal.app from Applications > Utilities and issue the following harmless diagnostic command and see if it reports no changes, or if it detects network or DNS errors:
sudo changeip -checkhostname
If this is OS X Server and a NAT'd network, you do not want to reference any DNS servers located off of your NAT'd network.
Why DNS? Because DNS errors can cause only some operations to fail, particularly if there's more than one DNS server selected (and where some subset of the DNS servers are malfunctioning or misconfigured).

User is not getting access after providing him db_owner also in SQL 2000 SP4

Similar Messages

Maybe you are looking for