User Key input for service selection

Hi, Is there an easy way of transfering keyEvents that are received in the keyPressed(KeyEvent keyEvent) method from a AWT keylistener to the middleware so it does its service selection.
I'm using the current focussed AWT component method for handling keyevents. Sometimes when the user presses numeric keys I want them to be handled by the middleware, so a service selection happens.
However my current focussed AWT component "eats" these numeric keys (because of the AWT event mechanism I presume). How can I pass them on or send them back to the middleware?
An alternative way I thought of was doing a service selection from within my app but if other methods exist I would like to try those first.

If you are using the MHP, I think you can also receive the event that your focus owner are receiving by using the addUserEventListener(UserEventListener listener,UserEventRepository userEvents) of the org.dvb.EventManager class. If you don't want your focused component to listen to this event, you can use the addUserEventListener(UserEventListener listener,ResourceClient client, UserEventRepository userEvents) method of the same class.
Let me know if it was what you were looking for.
Best regards,

Similar Messages

How to display a selection option for service selection

Dear All,
I want to display the selection option ("Other sources") which I find
in the /nse80 screen painter but cannot be display in the ME22N.
/nME22N
-> select one Purchase Order for Services
-> select one Item Line
-> at "Services" tab on Item Details Level
-> Add new ICON behind "Serv. selection"
Any ideas?
Thanks,
Neil

Hi Sharmila,
Thanks for your reply!
Actually, I find a User Exit program ("EXIT_SAPLMLSP_011") in selection screen program ("SAPLMLSP" ). This User Exit is for the radio button ("Other sources").
However, I don't know how to activate that button at ME22N.
By the way, can you go more details on how screen exits work?
Really thank for your support!
Neil
Message was edited by:
Neil Lam

How many transaction key used for Service PO

Hi,
Please let me know, how many transaction key used for Service PO...
In OBYC, we have maintained GBB & WRX Transaction key's for Service PO, Is there any other Transaction key skip???
Please guide...

Hi,
GBB is used for Offsetting entry for inventory posting but for Service procurement WRX Transaction key is used for GR/IR clearing-service.
NOTE: You may use WRX with new account modifier ZZZ to triggers GR/IR clearing-service only for service procurement where you need to post all separate GR/IR clearing- material , GR/IR clearing-asset and GR/IR clearing-service and can done with user exit.
#But in special case GBB can be used with VBR key or copy of VBR as ZBR for default G/L account foe service PO.
For more check the link:
http://www.bluemarlinsys.com/ns/0603-03.asp
Regards,
Biju K

No users are shown for Service Desk functionality in SOLMAN 4.0

Hello!
I would like to set up the business partners for Service Desk in SAP Solution Manager.
If I choose the solution and execute "Edit --> Create Business partner" for the SAP R/3 4.7 then I get the warning no users are shown under the system.
For the SAP SRM 5.0 I get only one user (SOLMAN<SID><CLNT>), meanwhile I set the data selection to blank.
I also copied the user account of SOLMAN<SID><CLNT> to the user test with no success.
I have assigned the Object S_RFC_ and S_USER_GRP.
The users have also the profile SAP_ALL.
How can this problem be solved?
Thank you very much!
regards
Thom

Thank you very much!
The problem is solved!
Im my case was necessary to apply SAP Note 1055630.
I have assigned the role "SAP_SM_S_USER_GRP" to the user with RFC_READ connection, refreshed the last alert in DSWP and tha is.
regards!
Thom

No users are shown for Service Desk functionality in SOLMAN

Hello!
I would like to set up the business partners for Service Desk in SAP Solution Manager.
If I choose the solution and execute "Edit --> Create Business partner"
no users are shown under the system.
Especially for the SAP R/3 4.7 system it is the case.
If I change the data selection for an earlier time or leave blank, the situation does not change, meanwhile I have enough users in the satellitesystems.
<b>How can this problem be solved? </b>
Thank you very much!
regards
Thom

Hi,
Answering your question!
Ans. 1. Either user should have SAP_ALL + S_RFC.. it is very important to have S_RFC object. SAP excluded S_RFC from SAP_ALL for the security reason.
or , any user should have authority to create and delete users + S_RFC, S_RFCACL & S_T-CODE.. I just did my setup, so I remember after searching for long long....
Ans. 2. you need the following RFC's for sattelite system;
>>> SM_<SID>CLNT(CLIENT#)_READ
>>> SM_<SID>CLNT(CLIENT#)_TRUSTED
>>> SM_<SID>CLNT(CLIENT#)_TMW
you should see them in solman sm59.... make sure you use proper user with proper OBJECT. other wise, u'll see bunch of dumps every hour.. Let me know if you need any other help!!
Thanks,
I hope this will fix your problem

No users are shown for Service Desk in SOLMAN for satellite systems

Hello!
I would like to set up the business partners for Service Desk in SAP Solution Manager.
If I choose the solution and execute "Edit --> Create Business partner" for the SAP R/3 4.7 then I get the warning no users are shown under the system.
If I log onto the satellite system and make some changes in su01 or pfcg the situation does not change.
<b>How can this problem be solved?</b>
Thank you very much!
regards
Thom

Thank you very much!
The problem is solved!
Im my case was necessary to apply SAP Note 1055630.
I have assigned the role "SAP_SM_S_USER_GRP" to the user with RFC_READ connection, refreshed the last alert in DSWP and tha is.
regards!
Thom

Need User-Exit / Badi For CO11N selection screen

Hello Gurus,
I need to add an extra functionality in the selection screen of the Tcode CO11N .Can you suggest some user exit or badi for the same .
The Functionality is : We need to make the field 'Reason' as mandatory whenever there is an entry in the field 'Scarp' .
Waiting for your valuable suggestion on this .
Regards,
Abhijit Mandal

Hi,
Followings are Enhancement or BADI for Tcode-CO11N
CONFPP01                                PP order conf.: Determine customer specific default values
CONFPP02                                PP order conf.: Customer specific input checks 1
CONFPP03                                PP order conf.: Cust. specific check after op. selection
CONFPP04                                PP order conf.: Customer specific input checks 2
CONFPP05                                PP order conf.: Customer specific enhancements when saving
CONFPP06                                PP Order Confirmations: Actual Data Transfer
CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01                                PS confirmation: Determine customer specific default values
CONFPS02                                PS confirmation: Customer specific input checks 1
CONFPS03                                PS confirmation: Customer specific check after op. selection
CONFPS04                                PS confirmation: Customer specific input checks 2
CONFPS05                                PS confirmation: Customer specific enhancements when saving
CONF0001                                Enhancements in order confirmation
CONFPI01                                Process order conf.: Calculate cust.specific default values
CONFPI02                                Process order confirmation: Customer spec. input checks 1
CONFPI03                                Process order conf.: Cust. spec. check after op. selection
CONFPI04                                Process order conf.: Customer specific input checks 2
CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
CONFPI06                                Process order confirmation: Actual data transfer
CONFPM01                                PM/SM order conf.: Determine cust. specific default values
CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04                                PM/SM order conf.: Customer specific input check 2
CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving
Regards.

Control key PS05 for Service activity in Network Profile

Hi,
I am creating a network profile in OPUU in which in activitie tab -> Services -> I am using control key "PS05" tos g plan and procure external services through Services.
but it is giving me error - The control key "PS05" is not valid. Message no. CS070
Can you please guide me in resolving the error?
Wtih Thanks and Regards
Ratna

Hi
Go to OPSH - Choose PS05
The fields "External Processing" and "Service" - You can try to play around with these fields
Br, Ajay M

Holding shift key down for multiple selection of objects ?

Possibly me - but latest release of muse on my mac running OSx 10.8.5 now holding down the shift key and clicking doesn't seem to allow me to multiple select objects- works fine in illustrator and Indd , cant see a preferences check anywhere that i have missed - am I the only one with this issue ?

catfordboyjohn, please join the discussion of this topic on this thread <Re: After upgrade to Muse CC 2014 i have problem with multiple selection. SHIFT dont work?>. Thanks.

How can I have a program prompt a user to input a selected number of simultaneous (different devices run off com/rs232 ports) and be able to compile all the data and/or graph it simultaneously?

I have a project that I'm working on that I could use some help on.
Some background on it is I'm taking data from a balance via RS-232 (can be a selectable list of balances), and then communicating with them on their own separate COM port. I need these to then run in parallel to then take masses in regular increments and then output them to a graph and/or TDMS file.
What I'm trying to have is that a subVI prompts the user to how many simultaneous runs will be going.
Then I will want multiple pop prompts (one for each simultaneous run) which will have initial data input (data cluster) and then associate these with the COM port and the specified balance.
I initially thought of utilizing a For Loop this way but I can't get these windows to pop up multiple times while storing their own values in say a cluster array. Can anyone give me any ideas to get me a little further?

Cameron,
I've created a prompt for the user to select the number or runs to be run simultaneously.
This then should trigger the amount of prompts the user needs to input - ie VISA resource, and headers to label the "samples".
I want this to be done in multiples (somewhere around 1-10 simultaneous runs - bounded by the program) so that data points from multiple sources can be taken and graphed/saved to file. I just am having issues with the loop situation to be able to keep prompting the user X times and also output the data to the front panel. Originally i thought I could somehow manipulate a tab control container but I'm getting roadblocked.
Does that help you understand what I'm trying to do?
I've attached an image of what I want the user to input for each sampling.
Attachments:
Capture11.JPG ‏24 KB

Short Name for same user results in different service authorization

New to Mac Server. Not new to Unix, command line, or sys admin.
I have a Mini Server, with two users; me and my wife.
Both Accounts have two short names each: Initals+Lastname, and First Name only
With iChat on the server, my account can login using both short names.
Her account can only login to iChat using the Initals+Lastname, not First Name.
Actually her account can log in to iChat using any variation of short names (I've added extra ones), but not the short name of just her first name.
Both users have identical permissions everywhere I can see, both are authorized for iChat.
The short name works if I remove permissions on iChat (I don't want to do this)
Both users are OD users, not local. I only have an admin account for local access.
Here is a snippet of the Jabber log:
jabberd/c2s[40845]: [11] SASL authentication succeeded: mechanism=DIGEST-MD5; authzid=[email protected], TLS negotiated
jabberd/c2s[40845]: odauth_check_servicemembership: checking user "kaarinas" access for service "chat"
jabberd/c2s[40845]: odauth_check_servicemembership: mbrcheck_servicemembership returned 0
jabberd/c2s[40845]: odauth_check_servicemembership: user "kaarinas" is authorized to access service "chat"
jabberd/c2s[40845]: [11] SASL authentication succeeded: mechanism=DIGEST-MD5; authzid=[email protected], TLS negotiated
jabberd/c2s[40845]: odauth_check_servicemembership: checking user "kaarina" access for service "chat"
jabberd/c2s[40845]: odauth_check_servicemembership: mbrcheck_servicemembership returned 0
jabberd/c2s[40845]: odauth_check_servicemembership: user "kaarina" is not authorized to access service "chat"
I'm stumped as to why one short name would work, the other not. Looking for hints on how to hunt down and solve the problem.

This isn't working for me. There was never a local "intern2" account, but I deleted the one in the ldap anyway, made and removed the local intern2 account. I then remade the intern2 account in the ldap directory(which increased the uid), rebooted the server, and the error remains the same as what you report.
Jun 8 13:36:00 server jabberd/c2s[212]: od_auth_check_service_membership: user "intern2" is not authorized to access service "chat"
There are 12 other accounts connected just fine. The issue is with this new intern account only.
Server 10.6.6.

Service Selection in SES

Hi,
While creating SES, service selection is called to select serives from Work Order, Contract etc. But, at times or for some Work Orders, the radio button option for Service Selection from Contract is missing. Any explanations, please ?
Thanks in advance,
Sheeja.

Hi,
A contract Limit can be maintained under Overall Limit in purchase Order.
This ensures some restrictions on the unplanned activity (the reason why limits are maintained). If only Contract Limit is maintained it would ensure that the unplanned activity would only be from the contract which exist between the Buyer and the Vendor (the same vendor for whom the current Purchase Order is made).
If such Contract Limit is maintained, it would be available as an option during Service Entry Sheet. (the Contract Line item number would be in Display mode).
The contract would be called off by the same amount as it is enetered in the Service Entry Sheet.
Another interesting thing to notice here is the Value tab (Vals) tab in Service Entry Sheet. There are 4 fields. Two of them is Unplanned Portion and Portion without Contract. Just try entering two unplanned activity, one with reference to the contract limit and second any other unplanned activity. See the difference for yourself!
Regards,
Ashu

Percentage Distribution in Case in PO for Services

User create PO for services with account assignment category P and item category D with reference to PR, after creating purchase order user change the quantity & value of services. Some times service line items are deleted and again enter in PO. During these changes percentage distribution (on account assignment tab) among different services becomes zero. When user try to enter service entry sheet, system gives error of u201CAccount coding allocationu201D & user can not enter service entry sheet.
Pl. Note: This problem is not consistent.

Hi,
Once u make a service PO wrt PR, then when u delete a line item the PR will open, then u create again The PO, give reference of PR line item also, in that case system gets collosion u come out of the system & do again.
Pandari

Prompting for user input in nested select statements

I recently rewrote a query to use a nested select statement instead of specifying every SELECT field on the GROUP BY line. Here's the query which works perfectly with hard-coded values of '030', '01/01/11', and '12/31/11'.
SELECT T0.[CardName] AS Customer, T0.[CardCode] as 'Cust ID', T0.[Phone1] as Phone, T0.[CntctPrsn] as 'Contact Person', T0.[Address], T0.[City], T0.[State1] as State, T0.[ZipCode] as 'Zip Code', T0.[Country], T1.[TotalSales]
FROM OCRD T0
INNER JOIN
   (SELECT I.[CardCode] AS CardCode, SUM(I.[DocTotal]) AS TotalSales
    FROM OINV I
    WHERE left (I.[CardCode], 3) = '030' AND (I.[DocDate] >= '01/01/11' AND I.[DocDate] <= '12/31/11')
    GROUP BY I.[CardCode]) T1
ON T0.[CardCode] = T1.[CardCode]
ORDER BY T0.[CardName]
When I try to prompt for the left 3 characters of the CardCode (or the dates), ie.
    WHERE left (I.[CardCode], 3) = [%0] AND (I.[DocDate] >= '01/01/11' AND I.[DocDate] <= '12/31/11')
I get an error "Column 'OCRD.CardName' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause".
It's like putting a user variable in the inner SELECT made it part of the outer SELECT which is exactly what I was trying to avoid by re-writing this query with the inner SELECT.
Can anyone explain what SQL Server is doing here and how to fix it?

Thanks Gordon. That's how I originally wrote the query and it works fine. But I was disturbed that I had to GROUP BY every field in my SELECT statement when I really only wanted to group by CardCode. So I did some research and came up with this where the inner select still groups by only CardCode and still takes user input. I don't really understand why you need the commented SELECT statements in the SET lines, but you do. Something about using real table fields for variables.
DECLARE @startDate datetime
DECLARE @endDate datetime
DECLARE @rep varchar(10)
SET @rep /* SELECT T0.[CardCode] FROM ORDR T0 WHERE T0.[CardCode] */ = '[%0]'
SET @startDate /* SELECT T0.[DocDate] FROM OINV T0 WHERE T0.[DocDate] */ = '[%1]'
SET @endDate /* SELECT T0.[DocDate] FROM OINV T0 WHERE T0.[DocDate] */ = '[%2]'
SELECT T0.[CardName] AS Customer, T0.[CardCode] as 'Cust ID', T0.[Phone1] as Phone, T0.[CntctPrsn] as 'Contact Person', T0.[Address], T0.[City], T0.[State1] as State, T0.[ZipCode] as 'Zip Code', T0.[Country], T1.[TotalSales]
FROM OCRD T0
INNER JOIN
   (SELECT I.[CardCode] AS CardCode, SUM(I.[DocTotal]) AS TotalSales
    FROM OINV I
    WHERE left (I.[CardCode], 3) = @rep AND (I.[DocDate] >= @startDate AND I.[DocDate] <= @endDate)
    GROUP BY I.[CardCode]) T1
ON T0.[CardCode] = T1.[CardCode]
ORDER BY T0.[CardName]
FOR BROWSE

User-Selectable Analog Inputs for X-Y Graph Axis?

Hey,
I've done a lot of looking at demos/examples, and I'm still have some issues with this one. I'd like to have a all of my analog inputs inside a drop down box on the front panel (one box for each axis). The user would be able to select which input they wanted on a particular axis from the drop down boxes. This would all be on the fron panel of course.
I found one good example (Signal Generation & Processing.vi) located in NI > Labview 7.1 > examples > apps, but I can't quite follow the sub-vi's. Note that I'd like the selected signals displayed on the X-Y graph to be real-time, not from logged data. Is an X-Y graph even the best plot for this? Thanks for the help ahead of time!
-Doug

Are you sure you want an XY graph? An XY graph will take your two inputs and plot them against each other, not against time. If this is what you want, here's a VI that has four different inputs simulating four acquired channels, and lets you select which of the four you want for both the X and Y axes.
Robert Mortensen
Software Engineer
National Instruments
Attachments:
Selectable XY Graph.vi ‏68 KB

User Key input for service selection

Similar Messages

Maybe you are looking for