User Library Taglibs Not Detected

It seems that NitroX only detects jarred tag libraries if they are in the lib folder. I have, for instance, an Eclipse user library setup that includes the JSTL jar files. NitroX does not detect the JSTL taglibs, even though my deployed application works just fine. If, however, I copy the same jar files into the lib folder then suddenly NitroX detects them.
Is this a bug?
Thanks.

Sorry about the incomplete information.
We just released NitroX version 3.0 M1 (stable milestone build 463) which supports taglibs imported using "External JARs / Add Variable / Add (user) Library" method.
Use any of this method(s) to include the external taglib jar file(s) and then follow below steps:
- Close & reopen the project
Note: By default tag libraries imported from external location do not list in the Tag Libraries view
- The "Tag Libraries view" displays the respective tags that are defined using taglib definition
Ex: <%@ taglib uri="http://jakarta.apache.org/taglibs/datetime" prefix="dt" %>

Similar Messages

  • No User Library? Where is the Mail.plist and Mail stored?

    I have installed Lion on an external USB 2.0 HD and want to copy over my Mail folder and mail.plist from my iMac's internal HD.
    I've copied them but don't know where to put them as there appears to be no User Library folder?

    We never found out why they hid the user library but not the main library.
    I can't remember helping anybody fix anything that they accidentally removed from the Library, but I sure told a lot of people how to fix stuff by digging into the Library.

  • At-mio-16-​h9 not detected ?

    I have this old acquisition board and I wand to program it under DOS with BC++.
    For this I have downloaded the file 480.zip from NI which provides all the necessary functions that interact with my board.
    The problem is that the example programs that come along with the library do not detect my board.
    The board is installed under windows 98. but I need to make a dos box program.
    Does anyone know the reason for my problem ? Do I need an extra DOS driver ? (in this case, where do I get it from)
    Thanks

    Actually, DAQ version 4.8 supports the device under DOS, but it will not support the device under a command prompt of Windows 98. You'll have to use NI-DAQ 5.0 or greater and configure the device with nidaqcfg.exe under Windows. You can then get the device to work out with programs called from a win98 command prompt.
    --Joe

  • Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

    Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
    Looking forward to hearing from somebody with a littlemore expertise than me, Chris

    you can remove preferences files by navigating to the Preferences folder for your user as follows:
    0) Quit ALL iWork apps (Keynote, Pages and Numbers)
    1) from the Finder select the menu item "Go > Go To Folder…".  This will bring up a dialog:
    2) enter the path "~/Library/Preferences" (no double quotes)
    3) find the files:
    com.apple.iWork.Keynote.plist
    com.apple.iWork.Numbers.plist
    com.apple.iWork.Pages.plist
    and move these to the trash.  I would NOT empty until later.
    4) restart Numbers

  • I desperately need to access my User Library folder in Time Machine (Lion so = not visible).

    Hi. I installed Lion a few months ago and got a new external drive to back up Time Machine.
    Nobody told me the User Library would be made hidden in the new OS. I have been backing up regularly in the belief that all my work, settings and so on was safe.
    Yesterday my iMac (27" 2.8 Ghz Core it with 4 gib memory) suddenly went mad. Message saying finder had quit whilst trying to restore windows. Desktop was flashing, no icons clickable, no external disks readable. Could access some progs and terminal, but nothing else. Could not get into the history folder to trash various plists and so on as the folder is hidden and the alt Go wouldn't work. The Finder just wouldn't do anything.
    I have sorted it out BUT I have lost my address book entries, my browser booksmarks, my desktop shortcuts and my iCal entries. I need to access my User Library on my Time Machine. Is there a way?
    I cannot believe I have been religiously backing up my stuff but Apple has made it so I can't access my backup of one of the most important folders on my Time Machine???
    Is there anyway of getting into this from Terminal or something? I will never be able to get back all the bookmarks and stuff I've been researching for years. I have it backed up on two different hard drives, both of which have 'invisible' library folders. I have make the folder visible now, for future backups, but it's after the horse has bolted. I am furious, and just feel like bursting into tears because of all the time it's going to take me to get all my work back. I can't tell you how stupid this was, Apple.
    If someone could help I'd be really grateful. I've got older backups but they are so old they won't get back my recent stuff.
    Thanks.

    select Finder
    hole option key and select Go in the menu
    Select Library
    Enter Time Machine
    You should be seeing all the versions of you Library folder.

  • My iPhone has two identical options under "iTunes wi-fi sync" that are the same computer. I only have one user on my  computer, and I tried moving my iTunes file in Finder to organize it and now my library's not synced with my phone. Help?

    My iPhone has two identical options under "iTunes wi-fi sync" that are the same computer. I only have one user on my computer, and I tried moving my iTunes file in Finder to organize it and now my library's not synced with my phone. Help?

    I have the same problem. Right now my iPhone 5S shows 3 instances of the computer to which it is connected under Settings » General » iTunes WiFi Sync. I'm having problems connecting and syncing, and this is probably the cause: the phone chooses one of these connections, and it isn't the one that's actually in use. What's probably happening is that the phone and computer establish a connection using a dynamic IP address, the address becomes "disassociated" due to error, another address is associated, the phone retains each address/link, and each link is displayed as if it represents a separate computer (the fact that the name of the computer is identical is ignored, as the only thing that is considered important is the IP address). But that's all conjecture. More important, I'm not sure how to fix the problem. A network reset doesn't do it.

  • Can not enable fonts for User library in Font Book

    Hi all,
    For some reason I can not enable the user library in the font book using the options in the font book. This means that the User Library is "off". I have tried the following but none of them have worked:
    * Reboot.
    * Delete the Font preferance file.
    * Undo the font book via booting in safe mode and then rebooting in normal mode. Delete the trash which contains the font cache.
    * Manually insert fonts into User>Library>Fonts and restart.
    * Manually empty user fonts folder and re-insert fonts back in.
    * Delete the user fonts folder and re-create it and insert all fonts back in
    Have also tried a few combinations of the above but none of them have worked. I do not want to use the system library fonts folder as this machine is on a network and the users should not have admin rights to their machines.
    I have also checked the user rights to the user fonts folder and all seems ok there.
    Does anyone know how to solve this problem so that I can enable the User font library?
    Any help would be much appreciated.
    Thanks
    Slack

    I have found that for me, on both a PowerMac G5 and an Intel iMac, both running 10.4.8 with all updates, turning on FileVault reliably causes the problem. I.E., if FontBook is working fine on an account which does not have FileVault turned on and I turn on FileVault, then the User collection in FontBook is greyed out and Enable "User" doesn't work. If FileVault is on, none of the suggested work-arounds that I have read about in these discussions or in Apple's support articles help.
    Sometimes, turning off FileVault is sufficient. Other times, I must turn off FileVault and follow the work-around in http://docs.info.apple.com/article.html?artnum=302551 . Sometimes, I must turn off FileVault, throw away the FontBook preferences and restart.

  • JRE 1.4.2 not detected on another user account

    We are using HOD V7 and I need to test something with java JRE 1.4.2_13.
    When I install the software (with an admin account) then loging with the user account, HOD tell me that he didn't detect any java version.
    When I try the same thing on the admin account everything is ok and working great.
    When I try with another admin account I have the same problem as with the normal account.
    We are using windows XP SP2.
    Thnaks

    I am unsing the account "1" to install the software. The account "1" is a member of the local admin group.
    I try to open IBM Host-on Demand and everuthing is fine. Then I log a normal user which is not an administrator and when I open Host-on demand I have an error message saying that no Java software is found.
    I log back with the account "1" and everything is still fine. Then I log with the account "2" which is also part of the local admin group. When I start HOD I have the error message saying that no java software has been detected.
    I have seen this kind of problem with poorly done software that only install itself in the user profile but I don't think that this is the case with this one.
    My point is if I have to deploy the JRE on all ocmputer (1000), I don't want to install it on every account.

  • When I click on some songs in my itunes library it says the file is not detected.  If i hook up my ipod will i loose the songs already on it or will it retore the files to itunes?

    When I click on some songs in my itunes library it says the file is not detected.  If i hook up my ipod will i loose the songs already on it or will it retore the files to itunes?

    Before to attach your ipod.... try to find the file where you put your music.... click on that song.... itunes will ask you if you want to locate it.... from there you have to find the song(s) that is one of the folders in your PC.
    http://support.apple.com/kb/TS1408

  • After Effects warning: Could not create the file '/Users/Library/Preferences/Adobe/After Effects/13.0/dummy

    I have just downloaded the trial After Effects CC. I'm running Mavericks 10.9.4 on my Macbook Pro.
    When I try to launch After Effects, this message appears:
    "After Effects warning: Could not create the file '/Users/Library/Preferences/Adobe/After Effects/13.0/dummy'"
    I have followed the advice from other posts on this issue regarding resetting all of the permissions in the Adobe folder in my library to read and write , but it doesn't change anything. I still get the same message when I try to launch the program. Moreover, there is no After Effects folder in my Adobe folder, even though it's clearly in my Applications folder.
    I also uninstalled After Effects and tried to reinstall it, but to no avail.
    I sure would like to give it a try, as I was planning on purchasing it, but this is just one more issue in a long irritating line of issues that have arisen since trying to download it from CC.
    Any help is much appreciated.
    Thanks.

    I am having this problem and this response does not make sense. I made the "Preferences" ,"Adobe" & "After Effects" folder along with the 10.0,11.0,13.0,13.2 folders all read/write. Can't seem to find an answer.

  • The version of the ADF Essentials Client user library, 12.1.3.0.41.140521.1008, does not match ADF facet version 11.1.1.

    Hi,
    I downloaded the latest OEPE Pack 12.1.3 and the latest adf-essentials-client libs.
    I tried to create a new ADF-Project in Eclipse with Glassfish.
    I added the essentials-client libs and then i get this error:
    The version of the ADF Essentials Client user library, 12.1.3.0.41.140521.1008, does not match ADF facet version 11.1.1.
    br.
    Andy

    Andy,
    ADF Essentials 12.1.3 only support GF 3.1 officially. So please plan on using GF 3.1 version
    ~Shabari

  • WARNING: [Labtools 27-3123] The debug hub core was not detected at User Scan Chain 1 or 3

    Hi all,
       When I'm trying to program my xc7k325t_0 on my Kintex 705 evaluation board, I get this error message:
    [Labtools 27-3123] The debug hub core was not detected at User Scan Chain 1 or 3. You must manually launch hw_server
    with -e "set xsdb-user-bscan <C_USER_SCAN_CHAIN scan_chain_number>" to detect the debug hub at User Scan Chain of 2 or 4.
    To determine the user scan chain setting, open the implemented design and use: get_property C_USER_SCAN_CHAIN [get_debug_cores dbg_hub].
     Here are the TCL Console messages: 
    INFO: [Labtools 27-1434] Device xc7k325t (JTAG device index = 0) is programmed with a design that has no supported debug core(s) in it.
      I have tried finding solutions to this, and that this error is because of the following:
    the clock connected to the debug hub is not free running clock or active
    the debug hub User Scan Chain setting is 2 or 4 (It is a 1 by default)
      It seems that there are no debug cores in my design. What should I do now? I am still a beginner, so any help will be greatly appreciated. Thanks.

    
    From which port are you taking the clock? Can you try using System Clock and let us know the results?
    set_property PACKAGE_PIN AD11 [get_ports SYSCLK_N]
    set_property IOSTANDARD LVDS [get_ports SYSCLK_N]
    set_property PACKAGE_PIN AD12 [get_ports SYSCLK_P]
    set_property IOSTANDARD LVDS [get_ports SYSCLK_P]
    Refer below link for more details:
    http://www.xilinx.com/support/documentation/boards_and_kits/kc705/ug810_KC705_Eval_Bd.pdf
    Thanks,
    Anusheel
    Search for documents/answer records related to your device and tool before posting query on forums.
    Search related forums and make sure your query is not repeated.
    Please mark the post as an answer "Accept as solution" in case it helps to resolve your query.
    Helpful answer -> Give Kudos
    -----------------------------------------------------------------------------------------------

  • Cisco Prime Infrastructure 2.2 clients and users IPs not detected

    Hi all,
    I have cisco PI2.2 and discovered all the network and i notified that there are some clients' IPs (Servers or PCs or Laptops or ....) not detected.
    please advice what may be the issue ? 

    Hi,
    does anyone happen to know if that problem is fixed? My currently setup looks like this:
    1. Cisco Prime Infrastructure 2.1 with updated device pack.
    2. Assurance license
    3. ASA5510 which has enabled netflow. Netflow is being sent to Cisco Prime 2.1
    I do receive netflow raw data within Cisco Prime 2.1 but any graphical display of netflow data is not working. Does anybody has an idea where the problem is? Could it be that the graphical data is only displayed when sending netflow 1, netflow 5 or netflow 7?
    regards
    Maurus

  • WM not detecting user login

    Hello,
    I face a strange issue in a ZFD3.2/NW6 environment, on some specific PCs
    (for the moment HP Vectra VL800, may be others) all policies that should
    run at user login are not running, ie Printer Policy is listed but as
    "Never executed" and if you run it manually it does it without problems,
    other policies like Group Policies associated with the users are not
    displayed at all. This affects all users on these PCs. Finally this happens
    since the PCs are upgraded to the vesion 4.9 of the client (tested all the
    patches without success), the only way to correct the issue is to downgrade
    the client to version 4.83SP3. Other models of PCs do not have the problems.
    Thank you for any idea.
    Patrick

    Pambuhl,
    It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
    - You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
    If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Photo Downloader does not detect Thunderbolt connection. Help!

    I am using Bridge CS5.1 on MacBook OSX 10.8.3. I bought a Seagate Thunderbolt Adapter which works with 2.5" eSATA hard drives (Seagate Backup Plus). Instead of connecting a 2.5" eSATA to this Thunderbolt Adapter to my Mac, I am doubling this thunderbolt connection as a CF card reader by swapping the eSATA portable drive with a CF to eSATA Adapter instead. Photo Downloader does not detect anything connected through thunderbolt!?
    When the CF card or portable drive is connected via the TB adapter, it appears in Bridge and Finder. The Canon's Image Browser (Memory Card Utility) detects only the CF card (not the portable drive) as a Camera and downloads the images from the CF card via the thunderbolt adapter with no issues. I would prefer Bridge to download the images due how the folder names are created by Bridge. (I have been using Bridge for few years now and dont want to change the naming convention. Can't seem to find a way for Canon to name it exactly the same as Bridge. It does YYYY_MM_DD amd I cant get rid of the underscores in Canon's software)
    How can I get Photo Downloader (File: Get Photos from Camera...) on Bridge CS5.1 to detect the Thunderbolt connection as a Camera?
    Excuse my messy desk, here's a pic of the set up with the CF card plugged into the CF to eSATA adapter : and onto the Seagate TB Adapter. and the TB cable goes into the Mac

    It works perfectly well. My issue is getting Adobe Bridge 5.1 to recognise the CF card via thunderbolt in photo downloader.
    Despite having bought a MacPro just a few months ago I still have no Thunderbolt connection so i can't confirm this.
    I do know Photodownloader has not changed a bit since it was presented long time ago and definitively needs a lot of improvement.
    It is very possible that Photodownloader is not capable detecting thunderbolt connections and Canon software doing so does almost proof APDL does not do so.
    You can try to dive in the user library (by default hidden, use menu Go and press option to reveal it) and in the folder preferences find and delete the Photodownloader plist file manual.
    restart photodownloader and try again.
    The other option is to use a USB 3.0 or Firewire (both also pretty fast).
    The third option is to use Bridge itself for renaming the files you imported manual. Using the sort order creation date and batch rename use the option for shot date (yymmdd-number or other info) and either organize with stacks or create folders.
    There is also a nice app (not free but cheap called 'big mean folder machine" from the same team that offers 'A better finder rename'.
    Both offer plenty of options that makes life easier, such as producing folders with specific naming and order in no time

Maybe you are looking for