User Management Setup: Registration Process not visible in Access request f

Hi,
We are trying to setup a autorisation flow for our responsibilities by using User Management.
For this I added some roles to the MISC Role category.
Then I created a registration process for these roles.
After that I would expect to see the acces request in the Additional acces request page. Unfortunately I don't.
When I run the view object behind the page, I notice that column umx_reg_services_vl.reg_funtion_id is empty for the roles I added. The seeded authorization that was allready present has a value for this column, and is presented in the screen.
I am wondering how to add a value into this reg_function_id column. I cannot seem to find the functionality in the User management pages.
We are on 12.1.2
Can someone help me out?
Kind regards,
Wilro

Hi,
You will need to have required permission (atleast read permission) for displaying this content. Access denied is showing at com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.heartbeats/components/PortalHeartbeat
Go to System Admin -> Permissions -> Portal permissions. Expand security zone folder -> sap.com and the subsequent folders in the above path (sap.com/NetWeaver.Portal/..) . Right click the last folder in that path as mentioned above and provide read permissions to the delegated content admin role.
Regards,
Harini S

Similar Messages

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests

Hi,
We are using SCCM 2012 sp1 cu5 with one primary in the datacenter and a number of local DP's which are presently servicing 200 users, but will rise to 12,000. The Application Catalogue is installed on the primary server.
Once a day we get the above error and the message id is 8101, and sometimes a user will have to click on install twice, with the first one failing (the ones that fail are normally with dependencies which are quite large in size around 250MB)
I'm just wondering if this is something I should be concerned about, especially since we will be ramping up user numbers in the next few weeks, and if it could be down to volume of traffic, although the apps are downloaded to the users local DP.
Also, does this design look suitable to service this amount of users, or should I have local application catalogues? The WAN bandwith between the datacenter and the user sites has recently been upgraded and is pretty fast.
Thanks
Jaz

Hi Torsten,
Message ID is in the SMS_AWEBSVC_CONTROL_MANAGER status log and equates to "Application Web Service Manager detected AWEBSVC is not responding to HTTP requests. The http error is 12002.
Then, about 1 hr later in the same monitoring log I get Message ID 8102 "Application Web Service Control Manger detected AWEBSVC is responding to HTTP requests.
At the moment it isn't doing this very often, just once a day at different times normally, but it has also logged this a couple of times as well. I guess it may correspond to multiple users accessing the web portal at multiple times, but wondered if
anyone else has seen this behaviour and how it was fixed.
Thanks
Jaz

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, Kedar

Hi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar

System error - User not authorized to access requested Info Object!

Hi, Experts,
I have a user ID begin with S***, but when I click some links, the following message shows:
"System error - User not authorized to access requested Info Object!"
How could I have authorization to see these links?
Thanks!
Lorrie

Hi Lorrie,
If you are a superuser, you should not get this error.
If not, you can not change any autohorizations.
Check it out. For your job, you have to be a super user.
Thanks,
Gordon

I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
For your SysFader issue, this "may" be the problem:
1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
2 Click on the "Advanced" tab. This will load a new page of options.
3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

OIM11gR2 DBAT User recon - custom UDF value not visible in User detail page

Hi,
I have configured DBAT connector for OIM11gR2 for user recon.
Have created and mapped few custom UDFs in the GTC.
User is created successfully in OIM, and has all the values correctly in USR table for all the custom UDFS.
But when i search a user in OIM, i can not see the value of custom UDF, even though it is in the database.
I have created and activated a sandbox and also added the custom UDF in the user details page using the Design option of ADF.
Is there something I am missing related to display of custom attribute and its value on the USer details page.
Kindly suggest.
Regards

Yes, your UDF should be available under Manage Users->UserVo1. It is working fine with our env. make sure you have the latest version of R2 release, because Beta release had an issue for same. You can create aonther UDF and and try gain.
verify same with below doc
http://docs.oracle.com/cd/E27559_01/doc.1112/e28183/oim_up.htm#BABEGECJ

Account generation workflow custom process not visible in lov

Hi guru,
i have created a sample process in "Project Supplier Invoice Account Generation".
but when i upload the work flow in data base by the concurrent program . i dont find the sample process in " account generation window" in GL.
Please help gurus.
Regards
vishal

Hi,
See the foll notes for solution:
Note 541877 - CUF: Customer fields as checkbox
Note 1016297 - Header customer fields are not displayed in bbpsc02
Note 1034079 - Customer fields not visible in shopping wizard
BR,
Disha.
Pls reward points for useful answers.

CRM Users Created on ABAP Stack not visible in Portal...........

Hello All,
I have WAS with ABAP + JAVA [EP7], Hence using <b> dataSourceConfiguration_abap.xml</b>. as a datasource file in UME.
As per my knowledge i cant create users from Portal hence I have created users in ABAP Stack but I am not able to view these users from Portal ?
I have chaecked the entry in Configtool this file is maintained as Datasource.
Please Guide me what may be the reson for this ??
Is it possible to add Users from portal if Datasource is ABAP Stack ??
Waiting for reply!
Thanks,
Smita.

Hi Smita,
Please go through these links:
UME configured to use SAP ABAP
For the configuration using config tool : http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm for general remarks using this config and see http://help.sap.com/saphelp_nw04/helpdata/en/0f/bdd93f130f9115e10000000a155106/frameset.htm for changing the config.
Check out the section "Read-Only and Read-Write Access to the ABAP User Management.
This link would also be useful. This link talks about <b>User Management of Application Server ABAP as Data Source</b> : http://help.sap.com/saphelp_nw2004s/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm
Hope this helps.
Regards,
Sunil

Credit Managment : Profile tab is not visible in BP

Hi All ,
I am working on FSCM credit managment project.
For FSCM credit managment :
I have activated the Badi : activation of SAP credit managment (Interface Set Active and FI_AR_Upadte mode)
1)Set Active
E_ACTIVE_FLAG = 'X' .
E_ERP2005 = 'X'
2)FI_AR_Upadte mode
E_DIRECT_UPDATE = 'X'.
But when I am selecting the Bussiness partner under (SAP credit managment role ).Profile tab is not visible .
Please help me out .
Regards
Rahul

Hi,
Pls check note 956054 and see if you have set up the business partner the correct way. This is the basis.
Rgds,
Richard

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

User details are not populating in access request

Hello All,
We have configured GRC 10 with LDAP and we are able to search the users in LDAP tcode(find option) and in the access request. But when i select the user and click on ok in the access request, user information is not populating to user details tab. I have followed the SAP Standard doc and configuration is fine. When i select data source as SAP system, user details are population as expected. But when i use LDAP as data source, i am having the issue. I hope this is an field mapping issue but i tried all different options but no solution i found. Kindly help me with your expert suggestions.
Field mapping is as follows:
LASTNAME
SN
FIRSTNAME
GIVENNAME
USERID
SAMACCOUNTNAME
ROLE_NAME
NAME
MEMBER_OF
MEMBEROF
EMAIL
MAIL
MANAGERID
MANAGER
Regards,
Jai Reddy.

I know the path, but how to check it? is it using metaverse search?
Look at the Runs. Are they succeeding, or failing to connect?
Remove the Bit 17 and try again.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Provisioning log is not available on Access request type Change Account

Hi,
So I have and issue when I try to submit a request to add a role to a user and I'm trying to understand what could be the reason for it. Basically I have a workflow that works perfectly for a "Change Request". I can see that all the steps are executed and then at the end of the request when is suppose to do the actual role assignment I see the message "Provisioning log is not available" then the approval path is finish and the request is closed but when I take a look at the user in the back end the role is not assign. In terms of access I have try giving SAP_ALL to WF-Batch, nothing shows in Yellow or Red on SLG1 and in SPRO->AC-> User Provisioning -> Define request Type I see "Change Account" with SAP_GRAC_ACCESS_REQUEST. What else can I do to troubleshoot this error?
Note: I when back to the to the AC 10.0 Pre-Implementation From Post-Installation to First Access Request and everythings looks right in terms of the AC Configuration settings.

Hi Jonathan,
In my question I was referring to SPRO - GRC/access control/user provisioning / maintain provisioning settings. Those need to be setup (min. global provisioning settings) in order to have role being assigned to user at the end of path.
Change account option you can see under request type is referring to change user master data(e.g. password/ account validity / details).
Is this system maintain by CUA? If so settings have to be different (see CUA settings in SPRO)
I would recommend moving to SP14 as in SP13 there were many bugs, by the way I believe the worst SP ever since beginning of AC is SP13 (maybe due to number), as it destroys many working functionality.
Filip

No Approvers visible on Access Requests

Hi Everyone
I am currently experiencing a problem on Access Request Management, on all my request types no Approvers are visible after submission of a request. Checking the request under Instance Status it shows no Approvers, the Approvers have been assigned on the Roles for Assignment approval and Content approval and also have been created on NWBC front-end as Role Owners. On MSMP GRAC_ROLEOWNER Agent has been assign to ROLEOWNER stage and also the stage task settings maintained, On the GRC system the Role Owner/Approvers have also be created and given the proper access including SAP_GRAC_ACCESS_APPROVER role.
I am not sure where I am going wrong on the Workflow, I have checked and verified also the settings under SPRO - Maintain Configuration Settings and Perform Task-SpecificCustomizing.
Your assistance in this is highly appreciated
Regards
George

Hi Lentobo,
As Dilip suggested ,please ensure that role owner is set-up in NWBC. Define role owner in , Access Control Owner hyperlink ,under Set up tab of NWBC.
Also make sure that you have checked the checkbox "Assignemnt approver" under Owner tab of that role.
Thanks,
Mamoon

User Management Setup: Registration Process not visible in Access request f

Similar Messages

Maybe you are looking for