User mapped section open

Hello All.
How to overcome this problem.
"Cannot copy ...: the requested operation cannot be performed on a file with a user-mapped section open."
I usually receive the above error message when I try to copy a new copy of *.fmx, or *.plx, or mmx while a user has a session open of my application.
Some time I want to release a new version of forms after fixing some bugs, but I have to wait for all users to log out.
Is there any way around this?

In this case you have to add a new string in the registry. Edit your registry and goto the home where the application server is installed and add a new string
FORMS60_MMAP=0 or FORMS90_MMAP=0
and restart the Server. It should work.

Similar Messages

Error processing cube - requested operation cannot be performed on a file with a user-mapped section open

Hi,
We have recently moved our production servers and since the move have been experiencing an intermittent (but frequent) error when processing our OLAP cube.
The error messages presented are:
"Error: The following error occurred during a file operation: The requested operation cannot be performed on a file with a user-mapped section open"
"Error: Errors in the OLAP storage engine: An error occurred while processing index for the <Partition Name> partition of the <Measure Group Name> measure group of the <Cube Name> cube from the <Database Name> database"
I assume the second message is a consequence of the first error. The partitions and measure groups seem to vary each time the process is run.
It appears from similar threads that this is usually caused by backups or anti-virus applications locking the files that Analysis Services is using the process the cube. I have ensured that there are no backups running at the time of processing and
I have disabled anti-virus programs without success.
I have also created a new version of the cube (using the deployment wizard) which deployed without error but then encountered the same error when processing for a second time. There was nothing (client application wise) using this cube when it failed
to process.
As I mentioned earlier, this problem is intermittent. Sometimes the cube will successfully process but usually it fails to process.
We have not encountered this error in our previous production environment or in any of our development environments.
Has anyone encountered this problem before? Any suggestions on possible solutions?
Thanks
Rich

Hi jonesri,
I think you can try to use SSAS Dynamic Management View to monitor SSAS instance, such as existing connections and sessions. For example, please run the following MDX query:
SELECT[SESSION_COMMAND_COUNT],
[SESSION_CONNECTION_ID],
[SESSION_CPU_TIME_MS],
[SESSION_CURRENT_DATABASE],
[SESSION_ELAPSED_TIME_MS],
[SESSION_ID],
[SESSION_IDLE_TIME_MS],
[SESSION_LAST_COMMAND],
[SESSION_LAST_COMMAND_CPU_TIME_MS],
[SESSION_LAST_COMMAND_ELAPSED_TIME_MS],
[SESSION_LAST_COMMAND_END_TIME],
[SESSION_LAST_COMMAND_START_TIME],
[SESSION_PROPERTIES],[SESSION_READ_KB],
[SESSION_READS],[SESSION_SPID],
[SESSION_START_TIME],[SESSION_STATUS],
[SESSION_USED_MEMORY],
[SESSION_USER_NAME],
[SESSION_WRITE_KB],
[SESSION_WRITES]
FROM $SYSTEM.DISCOVER_SESSIONS
Use Dynamic Management Views (DMVs) to Monitor Analysis Services:
http://msdn.microsoft.com/en-us/library/hh230820.aspx
In addition, you can aslo use SQL Profiler to capture some events for further investigation.
Use SQL Server Profiler to Monitor Analysis Services:
http://technet.microsoft.com/en-us/library/ms174946.aspx
If you have any feedback on our support, please click
here.
Regards,
Regards,
Elvis Long
TechNet Community Support

Problem in sun web server : user-mapped section open

Hi Friends,
I am using sun web server7.0. When i am trying to update the struts-config.xml file through my application. I got the following error message.
The Struts-ConfigXML couldn't be Modified Reason: C:\Program Files\SunWebServer7\https-java1.touchpoint.com\web-app\java1.touchpoint.com\gctnew1.0\WEB-INF\struts-config.xml (The requested operation cannot be performed on a file with a user-mapped section open)java.io.FileNotFoundException: C:\Program Files\SunWebServer7\https-java1.touchpoint.com\web-app\java1.touchpoint.com\gctnew1.0\WEB-INF\struts-config.xml (The requested operation cannot be performed on a file with a user-mapped section open)
 at java.io.FileOutputStream.open(Native Method)
 at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
 at java.io.FileOutputStream.<init>(FileOutputStream.java:70)
 at java.io.FileWriter.<init>(FileWriter.java:46)
 at com.tps.datareader.SaveStrutsConfigXML.executeSaveStrutsConfigXML(Unknown Source)
 at org.apache.jsp.admin.saveStruts_jsp._jspService(saveStruts_jsp.java:157)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:917)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:345)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:403)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:311)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:917)
 at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:391)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:272)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
 at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:232)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:160)
 at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
 at com.sun.webserver.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:149)
 at com.sun.webserver.connector.nsapi.NSAPIConnector.service(NSAPIConnector.java:995)
Note : I am reading the file while i trying to update the file..
Please help me to solve this issue....
Thanks & Regards,
Suresh Kumar.K

Hi,
I am seeing similar issue while configuring our deployed webapp on Windows.
The container is WebServer 7 (bundled with JES5).
C:\WebServer7\https-aaa.com\web-app\aaa.com\myapp\WEB-INF\test\xyz (The requested operation cannot be performed on a file with a user-mapped section open)
From WS7 logs/errors file:
[23/Apr/2008:17:02:15] warning ( 5280): CORE3283: stderr: java.io.FileNotFoundException: C:\WebServer7\https-aaa.com\web-app\aaa.com\myapp\WEB-INF\test\xyz (The requested operation cannot be performed
on a file with a user-mapped section open)
So i googled, found this thread and applied the workaround.
Noticed that if we shutdown our WebServer, then we cannot configure our webapp.
That page would not be accessed.
Any suggestions to overcome this?
tia.

CS5.5 Photoshop Save For Web Error - "cannot be performed on a file with a user-mapped section open"

I have just started getting this error when I try to "Save for web". I can still do File > Save As... with no problem. Does anybody know what might be causing this?

Hi jonesri,
I think you can try to use SSAS Dynamic Management View to monitor SSAS instance, such as existing connections and sessions. For example, please run the following MDX query:
SELECT[SESSION_COMMAND_COUNT],
[SESSION_CONNECTION_ID],
[SESSION_CPU_TIME_MS],
[SESSION_CURRENT_DATABASE],
[SESSION_ELAPSED_TIME_MS],
[SESSION_ID],
[SESSION_IDLE_TIME_MS],
[SESSION_LAST_COMMAND],
[SESSION_LAST_COMMAND_CPU_TIME_MS],
[SESSION_LAST_COMMAND_ELAPSED_TIME_MS],
[SESSION_LAST_COMMAND_END_TIME],
[SESSION_LAST_COMMAND_START_TIME],
[SESSION_PROPERTIES],[SESSION_READ_KB],
[SESSION_READS],[SESSION_SPID],
[SESSION_START_TIME],[SESSION_STATUS],
[SESSION_USED_MEMORY],
[SESSION_USER_NAME],
[SESSION_WRITE_KB],
[SESSION_WRITES]
FROM $SYSTEM.DISCOVER_SESSIONS
Use Dynamic Management Views (DMVs) to Monitor Analysis Services:
http://msdn.microsoft.com/en-us/library/hh230820.aspx
In addition, you can aslo use SQL Profiler to capture some events for further investigation.
Use SQL Server Profiler to Monitor Analysis Services:
http://technet.microsoft.com/en-us/library/ms174946.aspx
If you have any feedback on our support, please click
here.
Regards,
Regards,
Elvis Long
TechNet Community Support

User-mapperd section open

We are working on 10g app server
application is 24 hours working , now we have changed a menu file and when copying the mmx file to the application server we are getting error
The requested operation cannot be performed with user-mapped section open.
How to copy the file. it is very difficult to ask all the users to close the applications so that no body is using the menu,
same is happening if some one is using a form and we try to copy the fmx file of the same. then we have to check which user is using the form and request hime/her to close so that fmx can be copied.
IS There any way out?
Chaand Kackria

In this case you have to add a new string in the registry. Edit your registry and goto the home where the application server is installed and add a new string
FORMS60_MMAP=0 or FORMS90_MMAP=0
and restart the Server. It should work.

When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be perfomed on a file with a user-mapped selection open'.

When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
Can anyone help solve this please?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

User mapping is not saved

Hi All,
i am doing user mapping in personalization window,
if i am enter my user id and password after that if i am click on save button, the logon data is not saved, so pls solve my problem.
Regards,
Jagadish Babu Kanikanti.

Hi ,
I am configuring a production Server with SP14.
When i am in user mapping section, i find the error msg as below:
There is a configuration issue which leads to problems when accessing user mapping data for the selected backend system 'ESS'. Usually, the reason is user mapping being configured for strong encryption, but the necessary additional files being missing. Check the security log file for further information and hints on how to solve the problem.
I am not able to enter any user id / pwd ; The fields are greyed out.
I did solve the same in the development server using :
Goto System administration-system Configuration-UM Configuration-Direct Editing.
In that make the ume.usermapping.unsecure as TRUE.
But on seeing your reply stating this is not suitable for Production server, i am bit confused.
Can you pls help with me an alternate solution..
Thanks in advance,
venkat.

Open Files on Server 2012 - Why Do All Mapped Drives (and users) Show as Open

Our office just installed Server 2012 (Standard). We used to run Server 2003 Standard.
We have 3 shared/mapped folders on the server - and have 12 users mapped to those shared folders.
When I go to Computer Management/Shared/Open files, it used to be empty if no users were currently using one of the shared folders (in Server 2003). Now even if no users are currently using one of the mapped folders - most of the users
are listed with the mapped drive reference.
Is this something new in Server 2012?
I used to use this to determine exactly who was in a share if we had problems and needed to close that particular workstation. Now with them all listed, I am wondering if things are not closing properly??
Thank you for any insight you can provide!

Thank you for your reply. Now I notice that even though a workstation (Windows 7.0 Pro) has closed our Prosystem FX tax program, there will still be at least one file showing as "open" for that program on Server 2012 even though the user has
exited the program and we have rebooted the workstation.
The tax program itself doesn't seem to "think" the files are open as it lets me do tasks that require all users to be out of the program.
Just wondering why files that aren't open seem to show as open on Server 2012. They did not do this with Server 2003 and XP workstations. Or even with Server 2003 and Windows 7 Pro workstations. Just when we changed to Server 2012 and have
our Windows 7.0 workstations.
Thank you again,
Brenda

How Open More Ports into Mapping section...

Hi all..!
In the Mapping section it is only possible to open/access a certain number of ports... How can I open more ports or all if I wanted to?
Thanks for help...

If you want to map more than twenty ports, you need to use the Base Station's "default host" or "DMZ" feature. It is designed to forward inbound traffic on ALL ports to the private IP address of one computer on your LAN.
See also the article How do I use port mapping?

No User Mapping Defined for the system

Hi,
I am trying to create the transcation iView ,here in this i want to run the BW transcation..
For this i have created the transaction iView with the transaction code in that iview properties i have given the system alias which i have created for the BW system..
The system which i have created for this is SAP R/3 dedicated...
when i try to see the preview for this transaction iview it is giving the Error"No user Mapping defined in the system...
i have done the user mapping also...
Plz can any one help me in this..
useful solution will be rewarded...
Thanks
Shashank
Message was edited by: shashank moharana

Hi Shashank
the follwoing is total soln for connect EP AND BW and for ITS as well as SSO
Creating BW system in Portal
From the portal top-level navigation, choose System Administration -> System Configuration -> System Landscape
Navigate to Portal Content -> Your SAP Ssytem Folder i.e SAP BW
Right-click on the SAP BW folder, then choose New -> System
Select SAP system using dedicated application server
from System Template
Make the following entries for the BW system you want to connect to the Enterprise Portal
System Name -
SAP_BW
System ID -
Any ting u want like SAP_BW or SID of BW
System ID Prefix -
com.mycompany
Master Language -
English
Description -
NEXT -> Summary, review the options you selected for the new page.To make changes, choose Back to return to the appropriate screen. Then choose Next till you reach the Summary page, review, and choose Finish
Choose Open the object for editing and choose OK
The Property Editor iView will open
Select Connector in the Property Category dropdown
Enter the fields below according to your SAP system
Application Host -
IP Address of BW system or Host name ( FQDN required for SSO )
SAP Client --- BW system client
SAP System ID -
SID of BW
Server Port -
3200 default for system number 00
SAP System Number -
00 or ur instance number
System Type -
SAP_BW
NOW,
Select User Management from the Property Category dropdown list
Enter the fields below
Logon Method -
 UIDPW
User Mapping Type --- Admin,user
Note -: IF u want to use SSO for BW system first selct above and test it with BW system if it's ok than change to following
Logon Method -
 SAPLOGONTICKET
User Mapping Type --- Admin,user
choose SAVE.
Select System Aliases in the Edit dropdown list. This opens the System Alias Editor
In Alias, enter SAP_BW. Choose the Add button
Choose Save to save your changes and close the page
Connect With ITS
For BW
In Property Catalog, use the dropdown to select ITS.
Set your SAP system properties according to Following
ITS Description -
Description
ITS Host Name -
Host name : Port for BW system
If u want to use SSO use FQDN instead of host name
ITS Path -
/scripts/wgate
ITS Protocol -
http
Save your settings.
u can check its for BW by following
Find a port for BW using IIS manager
Administrator tools -> Internet Service Manager - >
extend the HOST
Find the site created for BW system same like SID of BW system -> right click -> Properties
TCP Port -- this is used for ur BW system
in IE http://host_for_its:Port_for_bw/scripts/wgate/webgui/!
WAS for BW System
Select Web Application Server (WAS) in the Property Category dropdown list
WAS Description -
BW WAS
WAS Host Name -
Host name : Port for BW system
use FQDN for SSO
WAS Path -
/SAP/BW/Bex
WAS Protocol -
http
Save ur entry.
User Management For BW and EP
Befor u start if u don't use SAP Secu lib during installation
change the following
system Administration -> System configuration -> Um configuration -> Direct editing
find out follwoing
ume.usermapping.unsecure=False
change to
ume.usermapping.unsecure=TRUE
Save and restart portal server
ther are so many option available for DATA source u have required doc for using that
if u have any query for that msg me back
Mapping Users in the Portal
if u want to use UIDPW than user must be map to BW system
go by following
User Administration -> User Mapping
select the user u want to map by serch or entering a name
Choose the Alias for your backend system, for example SAP_BW
Enter the user id and password for BW user
save ur changes.
SSO configuration
make sure ur Portal ITS and BW WAS system belong to Same
domain.
i.e
portal.mycompany.com
its.mycompany.com
bw.mycompany.com
if not, u can do by creating a alias into host file for corresponding system
for SSO follwoing parameter must be set in profile parameter using RZ10 in BW system
login/accept_sso2_ticket -
1
login/create_sso2_ticket -
1
login/ticket_expiration_time --- desired value default 60
now download the portal certificate form follwoing
System administration -> System configuration -> Keystore
Administration
donload verify.der file save it it's like verify.der.zip
extract it than u can get verify.der
now in BW system using trans. STRUSTSSO2
in the certificate section choose import certificate
choose the file tab enter the path of the portal's verify.der file
set the file format to DER coded
in the trust manager choose ADD to PSE and Choose
ADD to ACL
in the dialog box enter the portal system's id (SID) and client
by default portla system ID is the common name (CN) and client is 000
save ur entry and restart the BW server
this are the basci configuration if u have any query related to it msg me back
regards,
kaushal

PC users can't open iMovie .m4v file

my son made a really cute movie in iMovie, and saved it as an iTunes file, which put it in the .m4v format. i emailed the .m4v file to all our family and friends ... and the PC users can't open the file. can i do something about this (ie. save it in a different format)? please explain it to me in real simple terms ... i am a Luddite. thanks!

can i do something about this (ie. save it in a different format)? please explain it to me in real simple terms ... i am a Luddite.
You could always point out that anyone whould really wants to watch it could download and install the free QT 7 Player in much the same way that many Mac users would have to download and install either a WMV Player or a WMV component for their QT Player.
You realize, of course, things will likely get worse once you start "customizing" your exports of each recipient? My Sister only wants WMV 9 ($50 for Microsoft "approved" bi-directional components), my brother-in-law "prefers" DivX 6 minimum ($20 for the components), my nieces are into YouTube (posted directly from iMovie '08 for the price of iLife '08) and want everything posted there, and my Aunt (whose computer is more than a decade old) only wants MPEG-1 (which I used to make with iVCD (don't remember what that used to cost or Ti Toast 9 at $80) and of course there is always Visual Hub (at just under $24) for all of the others who will settle for older AVI or WMV files. You can also try exporting some of the "less recent" or "older" codecs like MPEG-4/AAC, Sorenson Video, Sorenson 3 Video, H.263, Cinepak, etc. There are dozens of audio and video codecs that can be combined in in hundreds of combination and placed in various file containers but the problem is you will probably never find a single compression format that really satisfies everyone all of the time. So before anyone can "draw you a map," you will have to make a decision as to "down which road you wish to travel."

Issue with user mapping and SAP reference system

Hello Gurus,
I have this strange system behaviour when preparing my system for single sign-on using user mapping.
Case 1.
In the user management property category, I have the following defined.
Authentication Ticket Type - SAP Logon Ticket
Logon Method - UIDPW
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_PRD
Result= when I go to identity management to assign the reference system (the default alias - SAP_PRD)...I do not see the system alias there.
Case 2:
In the user management property category, I have the following defined
Authentication Ticket Type - SAP Logon Ticket
Logon Method - SAPLOGONTICKET
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_DEV
Result, when I go to the identity management to assign the refernce system (the default alias - SAP_DEV), I see it there.
What might be my issue? Does it mean I can't assign SAP reference if I am using UIDPW as logon method?
Please help me.

Hi Mahesh,
Thanks for the feedback. I am relatively new to EP...so please I won't mind if you can guide me on how to go about this.
This is what I did...
I chose System Administration > Permissions
In the PCD, I located my system with the alias, SAP_PRD
It opened up the permission assignment area.
Now I have these permissions set
Administrator - Full Control
Administrators - Full control
com.sap.caf.eu.gp.roles.superuser - Full control
Everyone (built in group) - Full control
Everyone (Everyone role)- Full control
super_admin_role - Owner
For all the above End User box is checked.
I can't find anyone end user group .
Once I pick UIDPW, the alias disapperars from the reference system list.
Please help.

Need Help in User Mapping

Hi,
I have created some R/3 transactions and assigned to end user.
When i click on some Transaction name, it prompts me for username and password.
Can i personalise this by taking the username and password automatically.
Regards,
Raju

Hi,
From User administration -> Identity Management, select the user, group, or role that you want to map to a user (who is accessing the transaction iView). Click on Modify button below to edit details. Go to tab User Mapping for System Access . Select the R/3 system from dropdown and enter R/3 username and password to which this portal user or group is to be mapped to.
Open system properties and go to User management. Give the following values for the properties.
User Mapping Type :admin, user
Logon Method : UIDPW
For more details, check these
http://help.sap.com/saphelp_nw70/helpdata/EN/b6/8b9aea8d7c11d5bdd8006094191908/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/76bd3b57743b09e10000000a11402f/frameset.htm
Link mentioned by John is this
https://wiki.sdn.sap.com/wiki/display/EP/HowtoConnecttoSAPR3SystemthroughEnterprisePortal7.0Usingan+iView.
Regards,
Harini S

OBIEE11g: Set user privileges to Open RPD in Read Only mode.

Hi All,
Can some one help me , how to set user privileges to open RPD in read only mode.
1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
How to set the security to achieve this.

863866 wrote:
Hi All,
Can some one help me , how to set user privileges to open RPD in read only mode.
1) If a user ( xxxx) logs into the RPD then the rpd should open in Read Only Mode for xxxx user.
2) If other user (YYYY) logs in online mode then it should open in online mode for other user (YYYY).
How to set the security to achieve this.Hi,
I don't think it's possible, can go with metadata dictionary option which is also help to analysis RPD.
refer section,
http://docs.oracle.com/cd/E23943_01/bi.1111/e10540/utilitiesexprbldr.htm#BIEMG325
Thanks
Deva

About user mapping

hello every one
i have a question that is....
we configuration users mapping between SAP portal and R/3 System.
in this case, we know the user's IDs are "one to one" relationship.
but some times, we have to integrate the more external system such as BI system or others.
so how to map the users as "one to more" relationship in the portal?
waiting for your reply.
thinks !

Ok, I will try:
1. in System Administration > System Configuration > System Landscape create your own folder and a system there in - one for your R/3 backend, one for BI:
http://help.sap.com/saphelp_nw70/helpdata/EN/ec/0fe43d19734b5ae10000000a11405a/frameset.htm
Don't forget to test the connections.
2. Enable User Mapping and maintain the mapping data for both systems:
http://help.sap.com/saphelp_nw70/helpdata/EN/0d/fd76a0c4e0834ba1a17698d0b5553d/frameset.htm
There are 2 ways to map users: by Administrator tool or the users shall enter their own data:
http://help.sap.com/saphelp_nw70/helpdata/EN/b6/8b9aea8d7c11d5bdd8006094191908/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/b6/8b9af08d7c11d5bdd8006094191908/frameset.htm
3. Within Content Administration open the properties of the iView you would like to assign to a system. There you will find a property named 'System'. Choose the one with the correct user mapping for your context.
Hope this clarifies to you.
Cheers,
Anja

User mapped section open

Similar Messages

Maybe you are looking for