User selecting default display page from detailed navigation

Hello all,
Can individual users select a default display page from the detailed navigation section? For instance, say I have a list of pages in the detailed navigation each showing a BW report;
Detailed Navigation
Report 1
Report 2
Report 3
Report 4
So when the users navigate from the top level to here then 'Report 1' is automatically displayed. Say that towards the end of the quarter userX will be looking at 'Report 3' mostly while userY will wish to concentrate on 'Report 2', can the users themselves set their default? Or must this be done by the portal admin, rearranging the order of these pages in the assigned role or changing the display priority of them? But then it wouldn't be per user, if they shared the role.
If the users cannot do this themselves is there a way to do it in Java perhaps?
Thanks for you time,
Patrick.

Hi Detlev,
We decided on an easy way through.
Each page has to display a BW report, very simple. So we're going to give the users an iView where they get a list of all BW reports that they have access to (read from a text file). From there they select what they wish to be their default report (written to another text file).
The default page (first on detailed navigation) reads the text file and displays the BW report found there in an IsolatedHtmlContainer. Not precisely what was wanted at the start but pretty much offers the same functionality.
Thanks for your help, I'll read the doc. It's always good to know these things.
Patrick.

Similar Messages

User Defined Default Starting Page

Hopefully an easy question...what table holds the user defined default starting page? Specifically in 11g.
Thanks!

Hi,
Tried to set default dashboard for all the users.
1. Created a session init block
2. Used data source as select '/shared/SH Test/_portal/Test1' from dual
3. Assigned this value to PORTALPATH session variable
4. In Presentation services > Administration > My account > Default dashboard should be set to 'default'. Then only the dashboard specified in init block will be displayed otherwise My account will override the init block.
5. Save the changes made to rpd.
5. Logout and relogin to see if it is working fine. it is working perfectly fine.
For details please refer the GSC replication document. But it is for all the users.
if customer would like to have user/group based home page.
1. They may need to have 2 separate tables.
i. Group_path_tab with 2 columns. Group_id, portal_path
Have group wise portal path for all the groups
ii. User-group map table
Group_id, Group_name, user_id
User should be part of some group.
2. Then in the init block write the sql should be something like this
select A.portal_path from Group_path_tab A, User_group_map B
where B.user_id = :USER
and B.Group_id = A.Group_id
SO based on USER session variable, it will try to identify the group and then the portal_path.
Finally assign this value to PORTALPATH session variable.
xample:
Kindly refer the below one..it will very helpful to set homepage for to be different on a per user/group basis
http://varanasisaichand.blogspot.com/2010/09/default-dashboard-using-portalpath.html
http://total-bi.com/2011/01/obiee-11g-change-default-dashboard/
i.e:
Init block
select '/shared/AFS/_portal/GPC AFS Reporting' from dual
Variable target is PORTALPATH (IT'S CASE SENSITIVE)
'/shared/AFS/_portal/GPC AFS Reporting'
finally it's be like this
actual (earliar one)
http://w01sgpcbiapp1a:9704/analytics/saw.dll?dashboard&PORTALPATH=&/shared/AFS/_portal/GPC AFS Reporting
after calling default one :
http://w01sgpcbiapp1a:9704/analytics/saw.dll?dashboard&PortalPath=%2Fshared%2FAFS%2F_portal%2FGPC%20AFS%20Reporting
My earliear post :
https://forums.oracle.com/forums/thread.jspa?messageID=9917328&#9917328
Thanks
Deva
Edited by: Devarasu on Oct 18, 2011 9:24 AM

How to disable automatic loading of iView/Page in detailed navigation?

Hello,
We've upgraded our portal 7.0 from SP9 to SP12.
I've noticed that SAP have added this change: Whenever a user is navigating between one role/tab to another in the top level navigation the first folder at the detailed navigation is automatically opened and the first content there is automatically loaded.
I would like to disable this option - I've looked at the new properties that have been added to the detailed navigation iView between SP9 and SP12 and could only find these two: Display Parent of Hidden Node and Open Folder When Launched.
These two are not solving this problem and they are disabled anyway.
Any ideas...?
Roy

Roy,
Role and Workset Hierarchy:
Folders F1 and F2 (Roles) are defined as entry points and therefore appear on the first level of the top level navigation bar. What happen is when we click F1 (Role), the underlying folders F1a and F1b (Worksets) appear on the second level. On click on F1a the first entry F1a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
And same procedure happens with F2 role on the first level of the top level navigation bar. When we click on the F2 (Role) the underlying folders F2a and F2b (Worksets) appear on the second level of the top level navigation bar. On click on F2a the first entry F2a (Workset) of the second level is activated and its contents (iViews) are displayed in the detail navigation and the contents of the iView is displayed in the portal page of the content area.
I think need to configure levels of TLN which includes top level navigation, detail navigation and content area and then need to define the entry points.
Below are the links for configuring levels of TLN and right below it you will find link for define entry point:
http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
Hope this time it helps you.
Thanks
Mona

How can you set the default width of the 'Detailed Navigation iView'?

Hello,
we would like to reduce the default width of the 'Detailed Navigation iView' in order to save some screen space.
So far, we havn't found the right item in the portal admin to do this.
Any help would be much appreciated! Thanks in advance.
Frank Schülke, E.ON Ruhrgas, Germany

Hi Frank,
You can change the width of this navigation iview by changing the value of "defaultExpWidth" in the file WAandNAVPanel.js present in the par file com.sap.layouts.framework.par from default value 220 pixels to the value you want.
upload the changed par file and restart the server.
Hope this helps,
(if not do get back )
Regards,
Uma.
Do award points for helpful answers in SDN!!!!!!!:-)

"Can I select only one page from a PDF document to convert to an excel doc. ?"

"Can I select only one page from a PDF document to convert to an excel doc. ?"

No, so extract one page, then convert.

Earliar i can remove any selection in the page from right mouse key now i can't

earliar i can remove any selection in the page from right mouse key now i can't

See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols

How to make a report to display next 18 months of data with when user select a particular month from the filter in power pivot tabular model.

Hi,
i have a dimension table with month_key having values (201201,201202,201203.......202011,202012) and month name ( Jan 12, feb 12,......NOV 20, Dec 20) and a fact table with columns (month_key ,measure_types, Amount)
My requirement is to create a power pivot report in which when a user select a month from the filter, the report should display the (selected month+18 ) month's data against each type . when JAN 12 is selected ,the jan 2012 +18 = june 2013
, month name should be populated with months till june 2013 only .
i tried creating calculated column"END DATE " in the fact table with dax expression to calculate the 18th monh from the current month as below
month_key END DATE
201201       201306
201202       201307
and thought of filtering the table with month key <= ENDDATE but it is not working as expected. could you please guide me on this ? Is there any time intelligence function that serve the purpose . Iam using excel 2010
..hence could not do any calculation on the report side also. please suggest .
Thanks in advance

Do you need to show the measure calculated for those 18 months as a total on 1 row, or do you need to select a single month and then display on row filters 18 distinct rows?
The first is trivial as driezl has suggested.
The second will require a second calendar table.
I created this example workbook for a coworker who had a similar problem. You will have to use the disconnected table as your filter and pull your related table onto the rows.
Finally, the easiest way to deal with the sort of date arithmetic you need to do is to restructure your date table to have a series of "Sequential" fields. These fields should be the number of units of time since the beginning of your calendar.
For example, consider a calendar starting on January 1, 2010. For January - December 2010, [MonthSequential] = 1, 2, ..., 12. For January - December 2011, [MonthSequential] = 13, 14, ..., 24, and so on, incrementing by 1 for each sequential month in time.
Assuming you have this set up in your date tables (one related to your model - DimDate - and one disconnected - DisconDimDate) your measure would look like this:
18 Month Measure:=
CALCULATE( [Measure]
, FILTER( DimDate
, DimDate[MonthSequential] >= MAX( DisconDimDate[MonthSequential] )
&& DimDate[MonthSequential] <= MAX( DisconDimDate[MonthSequential] ) + 18
Please review this example along with the workbook I have linked above.

Default page in Detailed navigation

Hello,
i have a problem.
The scenario is: In detailed Navigation i have a number of pages that are showed as merge of different WorkSets.
The Merge ID and the sort ID are set but the first page opened is not the first of the list...
Thanks for any helps and suggestions
Andrea

Hi Andrea,
I think you should not use the merge id, but the sort priority to accomplish that (like Noel suggested). That's exactly what we do in our portal.
We have several roles each of which as the same merge-id for "link 2" and contains one of the "page 1", "page 2", ... (these pages do not have a merge id, but only different sort priorities)
The same merge ID on the "link 2" level makes sure that everything appears under "link 2" and now the sort priority (set at the "page 1", "page 2", ... level) determines which page is displayed where. In our scenario the most top page is always activated.
If this doesn't help you: if you click on "link 2" and "page 4" is displayed, is "page 4" the top most entry or is the sort order really
page 1
page 2
page 3
page 4
page 5
and still page 4 is displayed? If so, I think there is an option to set if an entry should be opened or not -- but I am not sure about this.
Regards,
Holger.

Open iviews in new window from detailed navigation context menu function

hello,
when we click in the detail navigation menu and in the context menu (because many of ours users are used to right click to open a link in a new window on the internet) on the functionnality "open in new window", the start page is always display instead of the corresponding iview ...
could you tell me if there is a configuration into the portal to :
1- suppress the function "open in new window" from the context menu in the detailed navigation !
2- make the iview displayed into the new window really the iview desired !
best regards,
Olivier.

Hi Olivier,
The frist part is very precise. Not possible. Period. The reason is that the links are calling JS and not directly calling a http target.
About the second part: Within the Light Framework, you create a Light Detailed Navigation. And in this case, the links are direct http links. So with that, you have what you want.
For the Light Framework see http://help.sap.com/saphelp_nwce10/helpdata/en/43/0174a642406db7e10000000a422035/frameset.htm and around.
Hope it helps
Detlev

SAP Web Page Composer: Detailed Navigation is not getting built

Hello!
I am new at this forum. At first I´d like to say hello to everybody! :]
Our issue concerns the following:
We started to work mit the Web Page Composer to build websites für our workers. Everything worked fine until the detailed WPC-navigation is not getting built anymore. We have this issue after a portal restart. Every steps to build and publish a website were done the right way.
1. Publish navigation und paste it to the external connector of the role in the form "wpcnavigation:///wpcontent..."
2. Permissions and security zones were set. Even the super admin is not able to see the detaild navigation anymore.
It is still possible to put single webpages to iViews and then to display them in the portal. And every function of the Web Page Composer works fine. The caches are deactivated. I tried to build a new site with new pages and a new navigation but there is the same problem, no detailed navigation is shown in the portal navigation. The role is assigned to a user and he can see the role at the top navigation but when clicking on it no detailed navigation appears, just a blank page.
As I mentioned this iusse appears after a portal restart. What could be the problem?
Thank you in advance!
Best regards
Georg

Hello Sandeep!
I created a new role and also did the Initial Configurations but it still does not work. May be there is a problem with the external connector where I connect the WPC navigation with the portal navigation? I know it sounds confusing but is there may be a way I could "reset" the WPC configuration? Because at the moment I tried to merge roles the system saved "some configuration" and started to avoid displaying the detailed navigation. So if could delete/reset/change this configuration, it could be that the navigation will be displayed again? I do not unterstand, if I just use one role and so avoid merging roles it just should work again? Or I am on the wrong way? Hopefully I am not telling bull**** right now! :]
At this moment our system running SAP NetWeaver 7.00 SP18. The patch is only available at least SAP NetWeaver 7.00 SP20. We are probably going to upgrade in october to SAP NetWeaver 7.00 SP23 and then we can update the WPC, too. Our Basis said, I have to wait till october. Before this upgrade no updates will be done.
Thanks for your help so far!
Kind regards!
Georg
Edited by: GBrauer on Aug 30, 2011 9:21 AM

How to access KM documents from detailed navigation tree area in EP???

Hello Gurus,
I want to simulate the portal navigation. I want to show a page also with a detailed navigation tree with links to several KM documents on left frame and a content area for such content files on right frame.
I have decided to modify standard par file "com.sap.portal.navigation.lightdetailednavigationtree" and I tried to modify JSP to show dinamically several links to KM documents applying logic based on webdynpro tutorial "Using Knowledge Management funcionality in Web Dynpro applications". But a runtime error occurs. I don´t know if I must add sharing references in portalapp.xml for using such classes and also I don´t know the way to do it.
It would be really grateful if somebody could guide me through this issue or give me another more proper solution.
Thanks in advance.
Best Regards.
Rosa

Hi javier,
If u want to access KM documents in some different format then ur default KM navigation Iview.
Then please have a look at this blog. It will really help you:
Launching WebDynpro from Universal Worklist
I hope it helps.
Please revert back in case of further issues.
Regards,
Sumit

Portal favorites Iview Displaying twice in detailed navigation iview

Hi All,
I am facing one issue in portal...
In all the roles Portal Favorites Ivew is displaying twice in the detailed navigation iview. And the options in the Iview are different like details, refresh, Open a new window....
I have only one default framework assigned to my desktop....
I cldnot trace out which is causing this issue...
Could someone adivse me on this...?
Thanks & regards
Sireesha.

Hi Munna,
This is the PCD-PATH of the second portal Favorites Iview.
Portal Component: com.sap.km.cm.navigation
Object ID:
fpn:DJP_FPN_JAVA/pcd:portal_content/SCOPP/RENAULT_Administration/SCOPP_DISPLAY/SCOPP_CCTS_Desktop/frameworkPages/SCOPP_CCTS.frameworkpage/com.sap.portal.innerpage/com.sap.km.PortalFavorites_0:rn4p6qvmOIw3xqr6ngdRBQ%3D%3D:1:
Regards
Sireesha.

Opening a HTML page from a Navigation link

Hi All,
I have a requirement of adding a new link at the navigation bar of WebClient. This link will open a static html page with some contents. I have created the page required for it. But I don't know how the link will be created at Navigation bar and how to open the html page from it. I am using the SAP CRM 5.0 and I want to add the link at Default profile.
Please help.
Thanks
Indranil Datta

Hi Sujit,
Thanks for your help. I have created a new navigation bar entity and added that in a customized profile. I have also mentioned the page name and path for that link from tran SPRO. I found that link after logging into IC WebClient. But that link is not connected with the required page. If I click on the link page, it get refreshed but without any change.
Thanks,
Indranil Datta.

Safari displays pages from US not UK

Hi all...
I recently purchased a Macbook Pro in the UK. When setting up I listed my location as London UK, however whenever I google or search in Safari the pages always load up as US pages, for example ebay.com rather than ebay.co.uk etc.
Is there any way to change the settings so that searches show the relevant pages from the UK? Searching for 'computer desk buy' and then being provided with items for sale in Wisconsin is not very helpful.
Many thanks in advance for any advice.
Garreto

Font Book, select all fonts, validate them, and finally resolve all duplicates. Restart and things should work normally.

How to go about building a app that searches for and displays pages from Google.

I was wondering how i would go about building an app that takes a users input such as a sentence (not a URL) and then searches for their input on Google. This app would then have to display a selected page automatically on the UIWebView.
My existing code in my viewcontroller.m is as follows:
- (void)viewDidLoad
[super viewDidLoad]; [webView loadRequest: [NSURLRequest requestWithURL:[NSURL URLWithString:@"http://www.google.com"]]];
I now want my app to use a users input (a word or a sentence) and search Google with that input but do it in the background then display the first search result in the UIWebView, what code would i need?
Thanks

Sorry, I cant view the App Store Review Guidelines
https://developer.apple.com/appstore/resources/approval/guidelines.htmllink, maybe its because i dont have a developers account yet i will be getting one when i am ready to launch my app on the app store.

User selecting default display page from detailed navigation

Similar Messages

Maybe you are looking for