User specific settings

Hi Gurus,
I have configured the displayed fields in the Table area of Planning board though Planning board profile configuration. The desired columns are visible in table area in CJ2C. But then I have change the displayed fields from field selection in Planning board and have saved the user settings.
Can some one let me know how to remove this user setting ?

Hi,
Open the project in the Planning board and use the option "Undo User setttings". This should solve your issue.
Check this and revert.
Regards,
Gokul

Similar Messages

Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

Hi Guru’s,
I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
Following is the screenshot attached for your kind reference,
That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
Right now I am using ECC6 and EHP7 SAP system.
Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
Hope the requirement is clear and in case need any clarification please revert back.
NOTE: Right now in Development System we don’t have any successful user to compare the settings.
Regards,
Kumar.S

Thanks Patra.
Even I searched in SAP portal and couldn't able to find the relevant OSS note.
Following is my BASIS team response,
"Only you can view Table Field values from higher release"
Can you suggest / guide on this comment as well.
Looking forward to your speedy response.
Regards,
Kumar.S

User specific settings for message ME161

All SAP Gurus,
Is it possible to have user specific settings for message like ME161?
We want the message ME161 to be displayed as warning message to one user and the same message to be displayed as an erorr message to another user.
Is it possible?
Regards,

hi,
In addition to the above data:
Messages are defined like this:
Version AG No. Text TYPE
Normally, in std case,
Version will be always 00 for system defined messages....
Now if you wanna make the the same message as authorised,
then copy this exsisting message....
While copying system will ask for version, here enter it it Z*
Now on the other hand make the other settings for user/user grp in SU01 and here set the user parameter as MSV(THIS IS MUST)....
and then try...
Regards
Priyanka.P

Convert date on user specific settings

Hi all,
I want to convert date on user specific settings
Example i have seetings like dd/mm/yy and another user has settings mm/dd/yyyy.
If i login any client i want to convert date to yyyyddmm.
How can i do this.
Thanks

Hi,
*   Convert date 1/3/9999 into 99990301
    CALL FUNCTION 'CONVERSION_EXIT_SDATE_INPUT'
      EXPORTING
        input = w_inputfile-endda
      IMPORTING
        output = w_inputfile-endda.
*   Convert date 99990301 into 01/03/9999
    CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
      EXPORTING
        input = w_inputfile-endda
      IMPORTING
        output = w_inputfile-endda.
or try this..
Key = sy-datum.
SELECT SINGLE * FROM usr01 WHERE bname = sy-uname.
CASE usr01-datfm.
    WHEN 1.
      WRITE key TO formatted_date DDMMYY.
    WHEN 2 OR 3.
      WRITE key TO formatted_date MMDDYY.
    WHEN OTHERS.
      WRITE key TO formatted_date YYMMDD.
ENDCASE.
Prabhudas

User specific settings in SSM_CUST table

Dear experts,
i know it is not a right forum for post this thread but i am not able find to right forum for such problem
My problem is that i disable favorites by adding parameter ALLOW_TCODE_START in SSM_CUST table
and it disble all the user to add tcode in favorites but i want user specific that i (administrator) am able to add tcode
in favorites but my client(subuser) not able to add tcode in favorites in sap easy acess .is it possible
please help.......................

THANKS FOR REPLAY SIR,
but i know all the configuration of USERS_SSM table
where follwing configuration to hide for particular user is given:-
1 user menu
2 sap menu
3 web menu
4 compny menu
but i want to disable favorites for specific user which i think is only possible by table SSM_CUST with parameter
allow_tcode_start but it disable favorites of me (admin) as well as my client but i want i am able
to add tcode in favorites but my client not able to add tcode in favorites
please help...............

User specific settings through SHD0

Hi
I have make some fields disabled for editing. I have done this through SHD0. Now i have to keep this setting for some specific users.
Please guide for this .
Regards
Raksha

Hi,
After you have created a transaction variant in SHD0,
assign a transaction for that transaction variant in SE93 or from SHD0->Goto-> Create variant transaction.
Once you have created a transaction, assign the authorization object to the transaction. This will restrict only the users to view this transaction varriant...others will not able to execute this transaction...
Hope this suffices your requirement...
Let me know icase of issues
Reward if useful
Regards
Shiva

ABAP Editor. Flag meanings from: User-specific settings - 'pattrn' tab

If you go through this path once you are in the ABAP editor (ECC 6.0):
utilities -> settings
Does anybody know how the flags from the 'pattrn' tab work? They are about patterns in Function modules and Class generators.
I cannot find anything through F1 help or SDN.
Best,
Cristian

You might be aware of the "Edit -> Pattern" functionality in the ABAP editor. The settings you are referring to influence some details, e.g. whether OTHERS will be included in the exceptions list when inserting function module patterns.
Play around with the settings to see the effect.
Thomas

Deploying Printers with User Specific Settings via Group Policy

Good Morning All,
We are getting ready to switch our print server over and would like to find an easier way to update everyone's printer list. The issue we are running into is that we have a few large copiers that use a user id number to validate any print jobs. Is
there a way to set that up in GPO so that it will give the correct code directly? I cannot find anywhere that I can adjust the printer preferences.
Thanks,
Brent

Hi
So you just want to update the TCP port with the new IP instead of deploying new drivers from the server?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

User specific currency printing

Hi ,
Could any one of you help me in getting the user specific commands ?
I have tried to change the user specific settings ..but it didnot work.
Request you to let me know the code such that the currency is automatically printed according to user specific settings

Hi Sindhuri,
Try the command SET LOCALE , it sets currency, date format nad number format to the current user settings.

User specific layout settings

Hi
We are assign the specific lay out for specific user the system is not allowing to save the data the following is the error description
User-specific layouts must start with a letter (A-Z)
kinly let me know if this is the authorisation issue
the functional consultant can able to do the setting
please provide the solution
thanks in advance
Regards,
Jyothi

hi
thanks for solution
i am followed the same
but still the problem is same
exactly what iam doing is
once we entered the screen there is some standard layout is picking the system that is 0SAP
Than iam selecting the choose button and selectin gthe layout 3SAP
than iam saving the data
system ids giving the pop up and there iam selecting the reqired layout and selecting the check mark user specific and saving the data . removed the even after 3 in 3asp
but still the problem is same
kindly explian me the procedure if iam wrong
thanks in advance

How to restrict users to not default layout while creating a user specific?

Hi all,
I have a problem with frequent changes in report layout setting. When users trying to create a user specific layout in the window "Default" is set, out of "User specific" & "default" checkbox defaultly, so users saving the layouts. so it's overwritting on existing layout. we are ossing the old data. how to restrict end users to create new one with out changing the existing one.How to change that default check in "Default" check box to user specific defaultly. where i have to do settings for this. Thanks in advance.
Pradeesh

Hi ,
My problem is still not resolved. I tried applying the people picker property and set a specific field(an email id field) to be available to only admins. Now the field is not visible to the normal users but only admins which is good but that email field
should be able to take normal users as wel as admin's email ID. currently due to the people picker property it only takes admin's ID and not normal user's ID - which is not as per expectation.
What this email ID field does is - when a normal user is logged in he/she wont see this field in that view. But when an admin logs in he/she can switch to admin view and see this field . The admin can put any user's ID in this field and pull out the required
resource's Time Report for modification.
Please let me know how do i overcome my problem. Detailed step description will be very helpfull .
As per Cameron's suggestion (add a rule on the "additional admin section") , i am not sure how exactly that is done. Would help a lot if i got to know how this works.
Regards,
Guru

Strange user-specific display problem

I use my MacBook with an external AG Neovo F-419 19"screen. I have one screen at work and another at home. It works beautifully except for one strange phenomenon: when I log into my account and watch the screen during start up, whereas it starts out having nice even-contrast graphics with a good color range, as the boot progresses it goes through two changes. At the first change the color balance changes, probably reflecting a calibration that I have done in the past kicking in from the Display Preferences info. But then it goes through a second change in which the contrast becomes extreme and the color range perhaps reduced and this then stays and I cannot reverse it by changing the settings in Display Prefs (I can alter the contrast, brightness, color balance etc. but I can't restore the normal color and contrast whatever I do). Bizarrely, however, I can restore things to normal just by rotating the screen and then Reverting to normal orientation.
This is user specific as it doesn't happen if I login as another users and it reappaears when I log back in (andagain gets undone by rotating the screen). It seems not to be a function of a particular Display Profile as I have tried changing them and deleting, ditto for the Prefs file in my User Library. Moreover, the external display does not need to be connected - it happens when I use the Macbook on it's own, which is very annoying because then I cannot rotate the screen to get rid of it!
If anyone has any ideas I would be very grateful as I do not want to transfer thousands of files into a new User account (I should say that I thnk this problem first arose in Tiger when I had another machine and it has migrated along with the User settings!!). Help!!
Andy

Hi,
I think you can only display a maximum message of 128 characters. There is also another function module SCCA_TH_POPUP which also has a message size of max 128 characters.
Danish.

User- Specific screen sequence in MMR

Hi
I need to create a User-specific screens in Material master record.That is for one user the basic data 1 should be there and for the other user it has to be blocked i.e he should not do any changes to that field.
Kindly suggest me a solution ..........
Regards
Siva

Hi
You can achieve it by following configuration steps in SPRO
1.Define Structure of Data Screens for Each Screen Sequence
2.Assign Secondary Screens
3.Maintain Order of Main and Additional Screens
4,Assign Screen Sequences to User/Material Type/Transaction/Industry Sector.
5.Maintain User Settings
Custamization path for the above configuration in SPRO is
Implementation Guide for R/3 Customizing (IMG)> Logistics - General>Material Master-->Configuring the Material Master
Please let me know if you need further inputs.

Layout - User specific - this needs to be unchecked.

Dear friends,
We have created a Layout in the Report. By default, User-specific tick is coming while saving the Layout. Others are not able to select this report. How to uncheck this tick ??
Regards
KVKR

It is most definitely an authorization issue. You, like any security auth issue, should be able to type in /NSU53 and see what authorization objects you have and which ones were checked that failed. That should give you the auth object/value you need to maintain global display variants. Please note though that a lot of companies lock this down heavily as having this access not only gives you the ability to create new variants but also update other global layouts and change the default settings.
From what I have typically seen IT has the global display authorizations and per the user requests creates them and makes them available for others. Where this isn't in place I've seen the global layouts get all out of whack and we got many phone calls saying "this never used to look this way before so fix it!"
Check out OSS Note 409190 but in summary "There is the authorization object S_ALV_LAYO with the authorization field 'ACTVT' (activity) and the value '23' for "Maintain".All ALV versions (Classic, Grid Control and Grid in fullscreen) perform an authorization check against this object.Users whose profile contains the value '23' are then allowed to create and maintain standard layouts and save them as defaults.
The authorization object can be checked via transaction SU21, object class BC_Z, S_ALV_LAYO and only exists from Release 46C."
Hope that helps.

How to set user specific Layout for executing IW38/IW39 report.

Dear Experts,
We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
After changing the setting all are getting same layout.
Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
Thanks in advance.

Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N

User specific settings

Similar Messages

Maybe you are looking for