User type for creating the Http connection from sap to xi

Hi Friends,
     I need to create the Http and Rfc destination connection from R3 to XI.
     For that what type of user is needed, like Dialog user and etc.,
Please guide me.
Thanks in advance
Karthikeyan

Hi,
If my Understanding is Correct You want to Make the RFC Destination of Type H From R/3 to XI.
If you want to send Any XML Data to XI( In case of Proxies Used means)
For Testing purpose You can use Your User And Once it went to production means You can Use Service User in the Logon Details( Ask Basis people to create one Service User & Use it)
REgards
Seshagiri

Similar Messages

  • HTTPs connection from SAP WebAS

    Hello,
    I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
    The iSaSiLk authentication is based on client certificates.
    I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated  with no errors. When testing the connection we're getting the following error message:
    SAP icm log:
    [Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
    [Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
    [Thr 1087400256]      in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
    [Thr 1087400256]     out: sssl_hdl = 0x1a3310c0
    [Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
    [Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
    [Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
    [Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
    [Thr 1087400256]   SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
    [Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
    [Thr 1087400256]      in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
    [Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
    [Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
    [Thr 1087400256]      in: hostname = "<remoteServer_to_be_accessed>"
    [Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
    [Thr 1087400256]   SapISSLUseSessionCache(): Creating NEW session (0 cached)
    [Thr 1087400256] Tue Jan 13 10:10:22 2009
    *[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
    [Thr 1087400256]    session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
    [Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
      secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
    [Thr 1087400256] >>            Begin of Secude-SSL Errorstack            >>
    [Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
    [Thr 1087400256] <<            End of Secude-SSL Errorstack
    [Thr 1087400256]   SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
    [Thr 1087400256]   No certificate request received from Server
    [Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
    [Thr 1087400256] ->> SapSSLErrorName(rc=-57)
    [Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
    [Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
    On the iSaSiLk server we're getting:
    ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
    ssl_debug(2): Received v3 client_hello handshake message.
    ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
    ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
    ssl_debug(2): CipherSuites supported by the client:
    ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
    ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
    ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
    ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
    ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
    ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
    ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
    ssl_debug(2): CompressionMethods supported by the client:
    ssl_debug(2): NULL
    ssl_debug(2): Sending server_hello handshake message.
    ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
    ssl_debug(2): Selecting CompressionMethod: NULL
    ssl_debug(2): Sending certificate handshake message with server certificate...
    ssl_debug(2): Sending certificate_request handshake message...
    ssl_debug(2): Sending server_hello_done handshake message...
    ssl_debug(2): IOException while handshaking: Connection closed by remote host.
    ssl_debug(2): Sending alert: Alert Fatal: handshake failure
    ssl_debug(2): Shutting down SSL layer...
    ssl_debug(2): Closing transport...
    From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
    Can anyone give me any suggestion?

    Hello Olivier,
    Thanks for your answer.
    I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
    Filename            SAPSSLSPHTID.pse
    PIN                 <no>
    Signature           X
    Encryption          X
    Profile Parameter
    DIR_INSTANCE                   /usr/sap/XID/DVEBMGS00                       /usr/sap/XID/D00
    sec/dsakeylengthdefault                                                     1024
    sec/libsapsecu                 /usr/sap/XID/SYS/exe/run/libsapcrypto.so
    sec/rsakeylengthdefault                                                     1024
    ssf/name                       SAPSECULIB
    ssf/ssf_md_alg                                                              SHA1
    ssf/ssf_symencr_alg                                                         DES-CBC
    ssf/ssfapi_lib                 /usr/sap/XID/SYS/exe/run/libsapcrypto.so
    ssf2/name
    ssf2/ssf_md_alg                                                             SHA1
    ssf2/ssf_symencr_alg                                                        DES-CBC
    ssf2/ssfapi_lib
    ssf3/name
    ssf3/ssf_md_alg                                                             SHA1
    ssf3/ssf_symencr_alg                                                        DES-CBC
    ssf3/ssfapi_lib
    Environment variables
    USER                xidadm
    SECUDIR             /usr/sap/XID/DVEBMGS00/sec
    PSE
    Validity            18.12.2008 19:47:04   18.12.2009 19:47:04
    Algorithm           RSA (OID 1.2.840.113549.1.1.1)
    Test signature
    Signature OK
    Verification OK
    Test encryption
    Encryption OK
    Decryption OK
    As you can see, the cipher algorithm used is RSA. Any suggestion... ?
    An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
    Once again thanks for your answer.

  • Cannot create an Essbase connection from Workspace

    Hi all,
    I have a new install and I cannot create a Essbase connection from Workspace. I can successfully create the essbase connection from Reporting Studio but I can't use that connection from Workspace. It seems like Workspace can't connect to Essbase. Has anyone experienced this before? Thanks...

    Workspace can connect to Essbase. To connect to Essbase perform the below task:
    1) Install Essbase Client on the Server where you have install BI Services.
    2) Configure DAS by using Service Configurator.
    3) Create an OCE which should connect to Essbase Server.
    4) Import OCE in to Workspace. Use this oce to create connection.
    Hope this helps you.
    Regards,
    Manmohan Sharma

  • 2013 Exchange, Can't connect to Exchange Management Shell. It cannot determine the content type of the HTTP response from the destination computer.

    The following error occurs.
             Welcome to the Exchange Management Shell!
    Full list of cmdlets: Get-Command
    Only Exchange cmdlets: Get-ExCommand
    Cmdlets that match a specific string: Help *<string>*
    Get general help: Help
    Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
    Show quick reference guide: QuickRef
    Exchange team blog: Get-ExBlog
    Show full output for a command: <command> | Format-List
    Tip of the day #0:
    Did you know that the Identity parameter is a "positional parameter"? That means you can use:
     Get-Mailbox "user" instead of: Get-Mailbox -Identity "user"
    It's a neat usability shortcut!
    VERBOSE: Connecting to mail1.dorothy.local.
    New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
    message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
    the destination computer. The content type is absent or invalid. For more information, see the
    about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
    Exception calling "GetComputerSite" with "0" argument(s): "The Specified directory object cannot be found."
    At C:\Program Files\Microsoft\Exchange Server\V15\bin\ConnectFunctions.ps1:164 char:2
    +     $localSite=[System.DirectoryServices.ActiveDirectory.ActiveDirectorySite]::GetC ...
    +    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : ActiveDirectoryObjectNotFoundException
    Failed to connect to an Exchange server in the current site.
    Enter the server FQDN where you want to connect.: mail1.dorothy.local
    VERBOSE: Connecting to mail1.dorothy.local.
    New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
    message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
    the destination computer. The content type is absent or invalid. For more information, see the
    about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
    Randy Cheek

    Good Morning,
    Log into the server with an account that has appropriate Exchange rights, not a local account.  
    Note: By default - Domain Admins don't have Exchange rights.
    Dame Luthas, ITILv3, MCSE Messaging 2013, MCSA, MCITP
    My Technical Blog: http://thelifestrategist.wordpress.com
    Discipline is the Difference between Goals and Accomplishments
    If this post is useful, please hit the green arrow on the left & if this is the answer hit "mark as answer"

  • Error trying to create https connection from Web Dynpro

    Hi experts!!
    I am trying to create a WD view with an actionButton and a form template, when the user fills the data in the form and presses the button, i want to create an Https connect and post some parameters to the URL.
    HttpsURLConnection cannot be resolved,
    com.sun.net.ssl.internal.ssl.Provider() does't not exist in the package com.sun.net.ssl.internal.ssl.Provider()
    do i need to add any jars?? I've already added the jsse.jar
    The code i use is the following.
    private void sendHttp(){
          String response = "";
          HttpsURLConnection connection = null;
          try {
                      System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
                      java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
                      URL url = new URL(<your_url>);
                      connection = (HttpsURLConnection) url.openConnection();
                      connection.setDoInput(true);
                      connection.setDoOutput(true);
                      connection.setAllowUserInteraction(true);
                      connection.setUseCaches(false);
                }     catch(Exception e) {
                      response = response +  "Error in getting connection: " ;
                      response = response +  e ;
                if (connection != null){
                      try {
                            connection.setRequestMethod("POST");
                            connection.setFollowRedirects(true);
                            //build all the parameters into 1 string
                            String query = "parameter1name=" + URLEncoder.encode(parameter1value);
                                  query += "&";
                                  query += "parameter2name=" + URLEncoder.encode(parameter2value);
                            connection.setRequestProperty("Content-length",String.valueOf (query.length()));
                            connection.setRequestProperty("Content-Type","application/x-www- form-urlencoded");
                            connection.setRequestProperty("User-Agent", "Mozilla/4.0 (compatible; MSIE 5.0; Windows 98; DigExt)");
                            // open up the output stream of the connection
                            DataOutputStream output = new DataOutputStream( connection.getOutputStream() );
                            // write out the data
                            int queryLength = query.length();
                            output.writeBytes( query );
                            output.close();
                            //if responsecode <> 200 you should stop: should always be 200
                            String responsecode = connection.getResponseCode();
                            if (responsecode.equalsIgnoreCase("200")){
                                  String inputLine;
                                  StringBuffer input = new StringBuffer();
                                  BufferedReader in =     new BufferedReader(     new InputStreamReader(connection.getInputStream()));
                                                                                    //Get site response
                                  while ((inputLine = in.readLine()) != null) {
                                        input.append(inputLine);
                                  in.close();
                                  response = response + input.toString();
                      }     catch(Exception e) {
                          response = response +  "Error in using connection: " ;
                          response = response +  e ;
              wdContext.currentContextElement().setResponse(response);

    Hai ,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/526bd490-0201-0010-038e-d3ff7eb1d16e
    please check above link .
    application server u have take load balancing click on next  there u take click on radio button of Msg server .
    Regards ,
    venkat

  • Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

    Hi
    how to create a external content type for  Read and Update data from two tables in  sqlserver using sharepoint designer 2010
    i created a bcs service using centraladministration site
    i have two tables in sqlserver
    1)Employee
    -empno
    -firstname
    -lastname
    2)EmpDepartment
    -empno
    -deptno
    -location
    i want to just create a list to display employee details from two tables
    empid firstname deptno location
    and same time update  in two tables
    adil

    When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list.  When I attempt to edit it, I get an error:
    External List fails when attached to a SQL view        
    Sorry, something went wrong
    Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
    I can edit the view in SQL Manager, so it seems strange that it fails.
    Any advice would be greatly GREATLY appreciated. 
    Thanks,
    Randy

  • Help! with creating a J2ME program using the http connectivity interface

    So this is what I have to do using the http connectivity interface:
    1.Creating two threads – one for communication (receiving and sending) and the other (main) thread will be for interaction with the user.
    2.The main thread will make use of three midlet forms. The first form will ask for web page address (URL) and separately for a delimiter which will separate the words in the URL document, the third form will display the ratio of all symbols on the page and the number of occurrences of the delimiter specified
    3.The second thread should perform http connectivity to the WWW, utilise the web page address supplied and connect to the appropriate web page and read its content, count all symbols on the chosen page, count the number of occurrences of the delimiter given as user input on the same form as the web page address, calculate the ratio between the two and pass this information to the first thread to display.
    I have many questions but my main concerns are:
    *1. How to communicate using HTTP interface within a thread*
    *2. What is a delimiter in the context above and how should it be implemented*
    I've been thrown in at the deep end with little programming experience with this assignment. If anyone can share a similar example or answer my concerns I'd be more than happy.
    Thanks in advance.

    thelane wrote:
    hi thanks for the response.
    As I said I have coded in other languages before, but this is a new for me in java. I needed to get it working quickley. Now I can clean up.
    I will have a look at method and see how I get on.
    ANy similiar examples would be great.
    Thanks.I can certainly give you a similar example.
    Say you have code such as this:
      int a = 10, b = 11;
      int temp = 1;
      for(int i = 2; i < a; ++i) {
       temp *= i;
      System.out.println(a + " factorial is " + temp);
      temp = 1;
      for(int i = 2; i < b; ++i) {
       temp *= i;
      System.out.println(b + " factorial is " + temp);Each section of code takes the factorial of the current variable an outputs it. The factorial code can be placed within a method to be called more easily, as such:
    public void factorial(int num) {
    int temp = 1;
    for(int i = 2; i < num; ++i) {
      temp *= i
    System.out.println(num + " factorial is " + temp);
    }Then, whenever you need to call it, you can just do so:
    int a=10,b=11,c=12;
    factorial(a);
    factorial(b);
    factorial(c);

  • Can't Create the ODBC connection for Oracle 10g

    Hi,
         I am working with Oracle 10g Database Release 2 in windows XP professional. I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
    system error code 998
    could not locate the setup or translator library
    Please help me how can I solve this problem and create the ODBC connection for oracle 10g database.
    Best Regards,

    mwz wrote:
    I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
    system error code 998
    could not locate the setup or translator libraryThe symptom described is typical of an incorrect system env PATH setting (used by the data source admin tool), compared to that of the Oracle Home (specifically, path $OH/bin). The odbc driver config routine will search directories listed in PATH variable for necessary libraries (Client dll's). If some library fails to load (from e.g. oraoci*.dll or oraclient10.dll) it will probably error out, as in your case.
    Are you creating the odbc dsn on the databse server host or on some other machine? I.e. are you using the db host as a client or not?

  • Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic. can anyone tell me what is the best way to clone the environment, can I just tar the weblogic file syste

    Hi, we need to create the test environment from our production for oracle AP Imaging. we have soa,ipm,ucm and capture managed servers in our weblogic..
    Can anyone tell me what is the best way to cloning the application from different environment, the test and production are in different physical server.
    Can I just tar the weblogic file system and untar it to the new server and make the necessary changes?
    Can anyone share their experiences and how to with me?
    Thank in advance.
    Katherine

    Hi Katherine,
    yes and no . You need as well weblogic + soa files as the database schemas (soa_infra, mds...).
    Please refer to the AMIS Blog: https://technology.amis.nl/2011/08/11/clone-your-oracle-fmw-soa-suite-11g/
    HTH
    Borys

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • Server closing the http connection

    We are trying to load test our app which takes an xml message thru
              http request. The request to our app is redirected from CSS (Cisco
              content services switch) load balancer. Our app is running in a
              clustered environment with 2 servers.
              When we tried to post 100 simultaneous messages (in turn 100 http
              requests) originating from the same java client program running on
              only one machine, we get an excception "Connection reset by peer:
              JVM_recv
              Socket write error".
              All these 100 requests are simultaneous and like that we ran the tests
              4 consecutive times without any delay.
              When we ran the tests thru the weblogic proxy server (the one that
              uses HttpClusterServlet) we did not face any connection issues like
              this.
              I'm wondering if this is a load-balancer problem or a weblogic
              problem.
              

    We're doing all the url connections thru our java program which
              creates 100 simultaneous threads which in turn becomes 100
              simultaneous posts. Someone is also suggesting that there is a time
              limit that CSS has before it received the content frame from the
              client once it opens the http connection. I'm not sure if that is
              true.
              "Vyas" <[email protected]> wrote in message news:<[email protected]>...
              > Cisco load balancer sets its own cookie to redirect traffic to the same server, this
              > cookie somehow seems to interfere with weblogic session cookie.
              > We had problems because of this in a production environment with
              > users interfering with each other's session.
              >
              > So far neither weblogic nor cisco owned up to anything , however weblogic gave us
              > a patch admitting to some problems with parsing cookies when other cookies are involved.
              >
              > I am not sure if the problems are the same for you,
              > what do you mean 100 simultaneous requests ?
              > through browser ? through httpurlconnection ?
              >
              > [email protected] (marsaroid) wrote:
              > >We are trying to load test our app which takes an xml message thru
              > >http request. The request to our app is redirected from CSS (Cisco
              > >content services switch) load balancer. Our app is running in a
              > >clustered environment with 2 servers.
              > >
              > >When we tried to post 100 simultaneous messages (in turn 100 http
              > >requests) originating from the same java client program running on
              > >only one machine, we get an excception "Connection reset by peer:
              > >JVM_recv
              > >Socket write error".
              > >
              > >All these 100 requests are simultaneous and like that we ran the tests
              > >4 consecutive times without any delay.
              > >
              > >When we ran the tests thru the weblogic proxy server (the one that
              > >uses HttpClusterServlet) we did not face any connection issues like
              > >this.
              > >
              > >I'm wondering if this is a load-balancer problem or a weblogic
              > >problem.
              

  • Error while creating the HTTP client with destination GB_DPSRetrieve

    Hi All,
    It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
    Please find the error log below and throw some light why the HTTP adapter is getting error -
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SOAP:Header>
    - <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <SAP:MessageClass>SystemError</SAP:MessageClass>
      <SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
      <SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
      <SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
      <SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
    - <SAP:Sender>
      <SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
      <SAP:Service>GGMailbox</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Sender>
    - <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>SAP_DEV_ERP2005</SAP:Service>
      <SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
      </SAP:Receiver>
      <SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
      </SAP:Main>
    - <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:QualityOfService>BestEffort</SAP:QualityOfService>
      </SAP:ReliableMessaging>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
      <SAP:P1>GB_DPSRetrieve</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    - <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
      <SAP:Engine type="IS" />
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
      <SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
      <SAP:Info />
      </SAP:Hop>
      </SAP:HopList>
    - <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Date>20071121</SAP:Date>
      <SAP:Time>155130</SAP:Time>
      <SAP:Host>lbsth-tb1ci</SAP:Host>
      <SAP:SystemId>XIS</SAP:SystemId>
      <SAP:SystemNr>00</SAP:SystemNr>
      <SAP:OS>Windows NT</SAP:OS>
      <SAP:DB>ORACLE</SAP:DB>
      <SAP:Language />
      <SAP:ProcStatus>023</SAP:ProcStatus>
      <SAP:AdapterStatus>000</SAP:AdapterStatus>
      <SAP:User>PISUPER</SAP:User>
      <SAP:TraceLevel>1</SAP:TraceLevel>
      <SAP:LogSeqNbr>000</SAP:LogSeqNbr>
      <SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
      <SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
      <SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
      <SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
      <SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
      <SAP:QIdInternal />
      <SAP:CommitActor>X</SAP:CommitActor>
      <SAP:SplitNumber>0</SAP:SplitNumber>
      <SAP:NumberOfRetries>0</SAP:NumberOfRetries>
      <SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
      <SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
      <SAP:PlsrvExceptionCode />
      <SAP:EOReferenceRuntime type="TID" />
      <SAP:EOReferenceInbound type="TID" />
      <SAP:EOReferenceOutbound type="TID" />
      <SAP:MessageSizePayload>0</SAP:MessageSizePayload>
      <SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
      <SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
      <SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
      <SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
      <SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
      <SAP:Reorganization>INI</SAP:Reorganization>
      <SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
      <SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
      <SAP:InterfaceAction>INIT</SAP:InterfaceAction>
      <SAP:RandomNumber>15</SAP:RandomNumber>
      <SAP:AckStatus>000</SAP:AckStatus>
      <SAP:SkipReceiverDetermination />
      <SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
      </SAP:RunTime>
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
      <SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
      <Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
      <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
      </SOAP:Body>
      </SOAP:Envelope>
    Regards,
    Kishore

    Hi,
    In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
    If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
    Also check if the Target system can be reached from the XI server to validate the configuration parameters.
    Regards,
    S.Santhosh Kumar

  • BEST PRACTICES FOR CREATING DISCOVERER DATABASE CONNECTION -PUBLIC VS. PRIV

    I have enabled SSO for Discoverer. So when you browse to http://host:port/discoverer/viewer you get prompted for your SSO
    username/password. I have enabled users to create their own private
    connections. I log in as portal and created a private connection. I then from
    Oracle Portal create a portlet and add a discoverer worksheet using the private
    connection that I created as the portal user. This works fine...users access
    the portal they can see the worksheet. When they click the analyze link, the
    users are prompted to enter a password for the private connection. The
    following message is displayed:
    The item you are requesting requires you to enter a password. This could occur because this is a private connection or
    because the public connection password was invalid. Please enter the correct
    password now to continue.
    I originally created a public connection...and then follow the same steps from Oracle portal to create the portlet and display the
    worksheet. Worksheet is displayed properly from Portal, when users click the
    analyze link they are taken to Discoverer Viewer without having to enter a
    password. The problem with this is that when a user browses to
    http://host:port/discoverer/viewer they enter their SSO information and then
    any user with an SSO account can see the public connection...very insecure!
    When private connections are used, no connection information is displayed to
    SSO users when logging into Discoverer Viewer.
    For the very first step, when editing the Worksheet portlet from Portal, I enter the following for Database
    Connections:
    Publisher: I choose either the private or public connection that I created
    Users Logged In: Display same data to all users using connection (Publisher's Connection)
    Users Not Logged In: Do no display data
    My question is what are the best practices for creating Discoverer Database
    Connections.
    Is there a way to create a public connection, but not display it in at http://host:port/discoverer/viewer?
    Can I restrict access to http://host:port/discoverer/viewer to specific SSO users?
    So overall, I want roughly 40 users to have access to my Portal Page Group. I then want to
    display portlets with Discoverer worksheets. Certain worksheets I want to have
    the ability to display the analyze link. When the SSO user clicks on this they
    will be taken to Discoverer Viewer and prompted for no logon information. All
    SSO users will see the same data...there is no need to restrict access based on
    SSO username...1 database user will be set up in either the public or private
    connection.

    You can make it happen by creating a private connection for 40 users by capi script and when creating portlet select 2nd option in Users Logged in section. In this the portlet uses there own private connection every time user logs in.
    So that it won't ask for password.
    Another thing is there is an option of entering password or not in ASC in discoverer section, if your version 10.1.2.2. Let me know if you need more information
    thnaks
    kiran

  • Issue in creating the standby database from Active database using RMAN

    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.

    Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

  • User can not create the quotation in PCUI

    Dear All,
    User salesrep is not able to create the quotation in PCUI. When he select the quotation tab and click on create button one pop up appears but no quotation appears in it and he can not select it for creating the quotation.
    I have checked the authorization objects for this user. Seems everything is ok from authorization point of view.
    User has authorization to create, display and delete for quotation in object CRM_ORD_LP.
    Please help me regarding this.
    Regards
    Pankaj Vispute

    Hi,
    Please check whether u have assign transaction type of quotation and iviews to salesrep user from Portal admin and related portal role to u r User.
    Regards,
    DD's

Maybe you are looking for

  • Changing the quantity of Schedule line for an product runtime

    Hi CRM friends, When I am saving the Order after changing the quantity (say from <b>5 to 10</b>); Now base on some conditions, quantity must be reverted back to the original quantity (i.e to 5). This has to be done while saving the order in a Call ba

  • How to populate another page item based on cascading select lists?

    Oracle 10gXE APEX 3.2 I've created cascading select lists based on the examples (using Javascript and AJAX) that i've seen on this forum. Thanks for help on that! Now that I have these LOV's being populated without needing to submit the page, how do

  • Can someone help me why this quick sort doesn't work

    public class QuickSortII {      static void sort(int a[], int lo0, int hi0) {         int lo = lo0;         int hi = hi0;         if (lo >= hi) {             return;         int mid = a[(lo + hi) / 2];         while (lo < hi) {             while (lo<

  • Detecting clientside NLS_LANG setting in SQL*Plus script

    Our company has developed an application that uses an Oracle database as it backend. Companies can buy our application and run it against their own Oracle installation. A new version of our application often requires an update to the Oracle database

  • T420 Hinges second replacement in 1.5 years?

    My T420 Hinges are beginning to wobble again and not adequately support the screen. Basically any minor bump to the computer moves the screen back and forth. This makes it very difficult to use the machine in a car, bus, airplane, or on any surface o