User with assigned task unable to open task to complete it

I have a SP 2010 custom list with an approval workflow attached.
I have set up permissions for a number of users to have access to the site.
A workflow was started and the task assignment email went to the first user.
When he clicks on the outlook message's "Open this task" button, he gets a popup that says "No such interface supported"
This works fine for me. It worked for others that I had try it.
What might cause this particular error to appear for a user?

I tested with several other people, and of them all, only one other showed the same problem.
Then, one of the testers had a thought. It turns out that everyone that was successful in "Open this task" from Outlook 2010 also had InfoPath 2010 installed.
One of the testers who was failing to get the task to open installed InfoPath 2010 on his machine, and suddenly, he was able to open the task.
I have NO idea why something installed with InfoPath 2010 is required for an out of the box task approval that is initiated in Outlook 2010.
If that is a requirement, then I would have expected to find it listed as a dependency somewhere.
try this on someone who doesn't have infopath installed on their computer.
1. In outlook go to File>Options
2. click on "Mail" on the left bar 
3. scroll down to the bottom and look for the section called "Other"
4. check the box for "Enable Microsoft InfoPath E-mail Forms"
5. then click Ok.
You may need to close out of outlook and reopen before the "Open This Task" button will work
Alex

Similar Messages

  • Is there somthing wrong with I tunes, unable to open on my computer?

    Is there something wrong with I Tunes, unable to open on my computer?

    I have been having troubles with my Itunes since it tried updating and I no longer have Itunes on my computer any more and when I try to upload it again I get a msg saying "service Apple Mobile Device failed to star" is this the problem your having???

  • Adding javascript code into user actions assign task operation

    Hi all,
         I've a severe issue , i searched for a solution and nothing returned till my mind blown , i made a process and put a lot of assign task operations with user actions {"Approve","Reject"} what i want to do is when the user hits Reject action a pop-up window is opening to him to put his rejection reasons / justifications, till now i couldn't find a solution or an article writing about a solution for it, so your help is urgently required.
    Thanks in advance & have a nice day.

    Hi,                                                             
    It will not easy to add actions to an OOTB ribbon button, there is a workaround that we can replace it with a custom button.
    Here is a documentation about Replacing a Button on the Server Ribbon:
    http://msdn.microsoft.com/en-us/library/ff407619.aspx
    Another two links about create a custom ribbon button for your reference:
    http://msdn.microsoft.com/en-us/library/office/ff407458(v=office.14).aspx
    http://sharepoint.stackexchange.com/questions/20646/attach-a-javascript-function-to-an-ootb-ribbon-button
    Best regards
    Patrick Liang
    TechNet Community Support

  • Problems with Assign Task operation

    I'm having a problem with the Assign Task operation. When I export an application of the LiveCycle ES2 environment and import into another environment LiveCycle ES2, my process get stalled in the all Assign Task operations, and the only way to solve the problem I found is to redo all the Assign Task operations. But in an application with many Assign Task operations, this solution becomes very complicated.
    Anyone who has encountered this problem could help me better to fix it?
    Thanks for any help!
    Following is the error message:
    StackTrace:
    java.lang.NullPointerException
    at com.adobe.idp.taskmanager.dsc.util.UserManagerUtils.getUserOID(UserManagerUtils.java:959)
    at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createTaskFromDialogPropertie s(UserServiceImpl.java:941)
    at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createLongLivedTask(UserServi ceImpl.java:1631)
    at com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl.createLongLivedTask(UserServi ceImpl.java:1506)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
    at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.java:53)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:357)
    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:227)
    at sun.reflect.GeneratedMethodAccessor643.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:237)
    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:158)
    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:169)
    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:378)
    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
    at org.jboss.ejb.Container.invoke(Container.java:960)
    at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
    at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
    at $Proxy378.doSupports(Unknown Source)
    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:165)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
    at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
    at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessage Receiver.java:93)
    at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:22 5)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
    at com.adobe.idp.jobmanager.execution.workadapter.AbstractExecutableJob.invokeRequest(Abstra ctExecutableJob.java:127)
    at com.adobe.idp.jobmanager.execution.workadapter.PersistentExecutableJob.execute(Persistent ExecutableJob.java:60)
    at com.adobe.idp.dsc.workmanager.adapter.UnManagedAsynchronousWorkAdapter.run(UnManagedAsync hronousWorkAdapter.java:39)
    at org.jboss.resource.work.WorkWrapper.execute(WorkWrapper.java:204)
    at org.jboss.util.threadpool.BasicTaskWrapper.run(BasicTaskWrapper.java:275)
    at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:743)
    at java.lang.Thread.run(Thread.java:619)

    Hi javier,
    1. record = <DATOS>
    If possible, try to use
    a pre-defined strucure of type P9069
    for putting data into this infotype.
    2. Avoid using field symbols.
    3. Try with P9069
    regards,
    amit m.

  • Windows 8.1 update 1 - users with domain mandatory profiles cannot open windows 8.1 Store

    Hi,
    After the update 1 on windows 8.1.  All of our domain users get "you cannot access the windows store because you're signed in to this pc using a temporary or guest account......" while opening windows 8.1 store.  All my users use mandatory
    profiles.  Could some one guide me onto:
     -how and what changes should I make on my base image of 8.1?
    -how/where what changes should I make on the domain in Group policy to make my profiles work?
    -I also run sccm 2012 R2 if that makes the things easier I can use it for deploying store apps, but I prefer to make a base windows 8.1 image throw all required apps on it.  I would like to make sure that my domain user can open up windows store after
    that I can capture this image and deploy.
                                  Need help thanks
                                  Note: Before this update 1 of windows 8.1 things worked great.

    Thanks Kate Li,
    Domain profile is not corrupt.  I have checked the registry settings.  In my question I am mentioning that I am using mandatory profiles for domain users.  Need help.
    I am on update 2 now and the same error for domain users with mandatory profiles.
    Also error 1001 is generated every time the user tries to open the store(the user with mandatory profile)
    Log Name:      Application
    Source:        Windows Error Reporting
    Date:          9/30/2014 8:52:17 AM
    Event ID:      1001
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Computer:      TCO-TTTEST.mydomain.com
    Description:
    Fault bucket , type 0
    Event Name: WWAJSE
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: winstore_1.0.0.0_neutral_neutral_cw5n1h2txyewy
    P2: Windows.Store
    P3: 3e43
    P4: FFFFFFFE
    P5: (null)
    P6: 0_0
    P7:
    P8:
    P9:
    P10:
    Attached files:
    ErrorInfo.5160.3992.txt
    C:\Windows\WinStore\AppXManifest.xml
    These files may be available here:
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 9b46f622-48a0-11e4-bec5-6036dd67e10b
    Report Status: 262144
    Hashed bucket:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Windows Error Reporting" />
        <EventID Qualifiers="0">1001</EventID>
        <Level>4</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-09-30T12:52:17.000000000Z" />
        <EventRecordID>366588</EventRecordID>
        <Channel>Application</Channel>
        <Computer>TCO-TTTEST.mydomain.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>
        </Data>
        <Data>0</Data>
        <Data>WWAJSE</Data>
        <Data>Not available</Data>
        <Data>0</Data>
        <Data>winstore_1.0.0.0_neutral_neutral_cw5n1h2txyewy</Data>
        <Data>Windows.Store</Data>
        <Data>3e43</Data>
        <Data>FFFFFFFE</Data>
        <Data>(null)</Data>
        <Data>0_0</Data>
        <Data>
        </Data>
        <Data>
        </Data>
        <Data>
        </Data>
        <Data>
        </Data>
        <Data>
    ErrorInfo.5160.3992.txt
    C:\Windows\WinStore\AppXManifest.xml</Data>
        <Data>
        </Data>
        <Data>
        </Data>
        <Data>0</Data>
        <Data>9b46f622-48a0-11e4-bec5-6036dd67e10b</Data>
        <Data>262144</Data>
        <Data>
        </Data>
      </EventData>
    </Event>
    Thanks
    Followed :
    http://support2.microsoft.com/kb/2890783  Made a brand new profile.  No luck same error.

  • New User with the task from the copied user

    Hi frnds,
       I created a new SAP user id by copying the existing. When i logged into the portal using the new user id, i was able to see the task from the original user id in the task list. But this should not happen. Is there any configuration to control it?
    Let me know if you have any solution for the same.
    Thanks,
    Suganya

    1. Its not happening now.

  • Providing users with a URL that will open up a Discoverer Worksheet

    Hi,
    As above..
    The plan is to use a URL within an iFrame on our website which automatically logs the user into a worksheet.
    I have created a generic Oracle user and created a workbook with one worksheet - these have both been shared with the new generic user.
    At present, I am able to log into Viewer, but can only get as far as the 'Select Workbook' screen - requiring the user to then expand the workbook and open the worksheet - I can't seem to open the worksheet in the URL.
    This was the example URL that one of the DBA's gave me:
    http://ssodisco.ghg.local:7787/discoverer/app/partialConnect?password=password&databaseIdentifier=oradev&userName=username&connectionLocale=browser_selected&event=connect&source=&connectionAccessType=RELATIONAL&eulName=&clientType=viewer&appsSSOConnEnabled=false
    But, I have since been trying this:
    http://ssodisco.ghg.local:7787/discoverer/viewer?password=password&us=username&wbk=CHARGING_SLA1111&wsk=5217
    This prompts me for a password, but then opens up the worksheet required. Just need it to bypass the password request now.
    Any ideas?
    Cheers
    Mark

    Hi,
    I created the little html form as described and still get prompted for the password.
    Once password is entered the correct worksheet is opened, but I need to remove the need to enter the password.
    Cheers
    Mark

  • With PSE 7 Unable to Open Organizer, Editor, Create, Share

    I am new to PSE7. I installed the program in Jun and have only played with it some.  Last night I used the program with no problem.  This morning I opened the program and the Welcome Screen comes up.  I am able to sign into photoshop.com.  However, when I click on Organizer, Editor, Create or Share everything disappears.  Can anyone help me?
    Thank you, Linda

    Thank you for your response.  I tried step 4.  When I clicked on  the link
    I get an error message, "Error "Licensing for this product has stopped 
    working" when you start any Adobe Creative Suite 3 application." I am a true 
    computer novice and I did not know if this applies to PSE7 or if Adobe
    Creative  Suite a different application.  Should I follow the steps that pop up
    from  Adobe Tech Support or should I start with step 1 and try the steps in
    your  link?
    Thank you so much for your help,
    Linda
    In a message dated 8/7/2009 11:23:18 A.M. Eastern Daylight Time, 
    [email protected] writes:
    Unfortunately, there are many reasons why the PSE Organizer might  crash,
    and often it is hard to diagnose quickly the reason for the  crash.   I
    suggest you try these troubleshooting  steps:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troublesh
    ooting_Organizer_crashes
    Start  with step 4, and if that doesn't help, work methodically through the
    others.

  • SBS2008 DOMAIN PC'S UNABLE TO OPEN SOME WEBSITES COMPLETELY

    This problem started with chrome and now if I have IE10 installed the same thing happens and this is that some pages open fine, some time out. Also what has happened is that Security Essentials will not update with the update button. It will update through
    WSUS or if I download of the upload file(Although on occasion I need to pause and restart the download to get it to finish). IE9 which is what I have to keep running has no problems.  We are using SBS2008 as well as a SQL Server on a Hyper-V server. It
    has been in service for about 3 1/2 years now, with 10 clients. Like I said I first noticed the problem with Chrome over the Summer and when I upgraded to IE10 on one workstation in November and found it had the same problem as Chrome had had. The last tidbit
    is that I have placed a wireless router, not an Access point, in between the server and the same workstation that's logged into the domain to the wireless router and everything works fine. Including the update button for Security Essentials. Also All workstations
    are windows 7 pro 64bit. Any and all help would be greatly appreciated.

    Hi,
    Have you checked if there are any security settings have been configured in IE? Can you ping to these websites that could not be opened on these computer? Please also try to delete the IE temporary
    files to see if the issue persists.
    How to delete the contents of the Temporary Internet Files folder
    http://support.microsoft.com/kb/260897
    Hope this helps.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Andy Qi
    TechNet Community Support

  • Show message popup when finish assigning task

    Hi all,
    I want to whenever user finish assigning task to other user, bpm will show popup window to confirm some information (i have just tried FaceMessage). Now, I am writing code in event TaskValidationCallback but it's not working.
    Somebody help?
    Thanks.

    Hello Nguyen -
    CIL (Common Intermediate Language) is the code we are writing inside the activity as method.
    It can be any one of BPL(Business Processing Language - is the common snippet using for OBPM) or .NET or Java code.
    In the above case we are using BPL.This is the beauty of Oracle BPM.Its supports all the three :)
    Each process activity references a method. Methods can have CIL code implemented or can be empty,
    but associated methods must always exist for process activities.
    Please check : http://en.wikipedia.org/wiki/Common_Intermediate_Language
    BR,
    Justin.

  • Unable to open ~ce.......

    Post Author: jlpete72
    CA Forum: Deployment
    I'm working with a customer who is experiencing a problem opening CR instances.  In an increasing percentage of cases, the user is presented with the error "Unable to open ~ce.......rpt" .  Sometimes if the user is persistent, and keeps asking to open the same instance, they will eventually succeed.  It has gotten to the point where up to 90% of requests are producing the error message.
    The customer is running BOE XI R2 SP2 + PP, but we have also created an SP1 instance using a copy of the system database and repository and get the same errors.
    Initially, there were two servers in the system.  To attempt to eliminate network contention issues, we have reduced the system to a single server installation with one instance of each relevant service.  The customer runs 100% Crystal Reports and all reports are scheduled.  Users cannot run reports on demand.
    SQL Server 2005 is being used as the sytem database.
    Repository was initially on a SAN, but has been moved locally in the attempt to eliminate network traffic/contention issues.
    Any suggestions would be appreciated.  I have not done a migration to a new instance yet, but see that as a viable option in the near future.
    If I am reading the error message correctly, it seems that the pointer to the instance file has been found and the file itself has been located.  All services are being run with a domain account with adminstrative priviledges.

    Post Author: DellS
    CA Forum: Deployment
    Have you checked to see if the file mentioned in the error actually exists in the Output file store?  If it does, then the problem lies somewhere in the Crystal Page Server or the Crystal Cache Server.  If it does not, then you'll have to look at a couple of things:
    - What type of user account is are the servers using?  I highly recommend having a separate services account rather than leaving the defaults.
    - Is the filestore folder shared?  If not, it needs to be.  Make sure that the user account that's running the services has Full Control of that folder under Permissions on both the Sharing and Security tabs of the folder's properties.  (If it's on the SAN, this is a major reason why you need to not use the default login for the servers.)
    Is this a recent install of SP2?  Have you installed any of the FixPacks?  If not, have you looked at the Fix Pack documentation to see if any of it applies?
    -Dell

  • "Unable to open project file" message in final cut express 3.5.1

    I have (well had now) a project with 3 video clips and multiple .psd files as stills. When the project contains just the 3 video clips and a couple of transitions I can save the project and quit Final Cut Express and relaunch FCE and when I try to re-open the same project, it opens just fine, without any problems and just the way I expected it to be. After editing the same project for a couple of hours and saving along the way (this has happened twice now and I don't think the length of time of editing matters) and adding multiple still images to the 3 video clips (this part is new in my working with FCE); I save and quit. When I return to open the same project I get the message "Unable to open project file" and click the OK button, which is my only option and I am given a new blank project. So where did my work go???

    Thank you for the response, but it hasn't worked yet...
    I read the link. I am working off my internal drive.
    I re-named the Capture Scratch folder, and any Render folders and then launched FCE. I was presented with a window that reads "To preserve the integrity of the data used by Final Cut Express HD, it is necessary to ensure the existance of the following path(s)" The path in the box below is where my project file and support files are. My 3 options are Quit, Check again and Reset Scratch disk. I choose the Reset Scratch Disk button and it took me to the Scratch Disk window and I Set/Created a new folder and clicked Choose and then OK back at the Scratch Disk window and Continue at the initial window... the Reset Scratch disk button is now labeled Continue. I am given a new Untitled Project work space. I tried to open my project file and once again with the message "Unable to open project file".
    Where did I go wrong???

  • Unable to open project files can filters effect this ?

    Hi Guys ! I have been a long time reader of the forums and from just observing have always learned a great deal from the discussions. Up until now I have been able to read through post and always find an answer from some of the great advice. As a relatively new Final Cut Editor I have limited knowledge but can edit and have learned enough to structure my work flow and put a project together how I would like it and complete with good results.
    I have read a few post on this subject “Unable to open project file” but haven’t seen any with the specifics as my own.
    Up until yesterday my files were opening all fine and working perfectly until this last night I had saved and shut down my Mac in the normal fashion. When I tried to open two specific files I was greeted with the infamous “Unable to open Project Files”. These as I can gather are the only two files that will not open and both files have used the RIVER ROCK– Chromatic Glow, or Day for Night Free downloadable Filters in the last 2 weeks could this be the reason ?
    I have all the recent updates and have tried going into the Auto Vault and Render files to access the last available versions of these project files. I am able to access those but am only left with a much earlier version of the same project like a version a week earlier without vital changes.
    So I would pretty much have to start again.
    Any Help would be greatly appreciated
    Regards
    FC

    Hi Tom thanks very much for your reply! , I un mounted the external drive , and reset and created a temporary scratch disk on My Hardrive to get Fce to start.
    The 3 projects I have been working on which all were rendered on the 2nd of April around 3 in the afternoon. Two of the Files using the River rock filters are Not accessible from the most recent and up to date versions. The one remaining Project is able to be opened and is the only one not using the filters.
    The two files accessed from the auto save vaults before April 1st up to 3pm April 2nd are working and are able to be opened with no problem. Everything after that is not opening which is a real downer as its where the project became near completion but at least I have a time frame of when things started to go wrong.
    What would you suggest?

  • User "wlisystem" has not been assigned task "Task 1"

    Hi,
    I am having problems executing a task thro' Worklist JSP. My env. is WLS 7.0 on Windows
    NT.
    I can do a Start Workflow and then click on the appropriate template.
    Then, when I click on the task, I get the error (see below)
    Any help please? This used to work fine in WLS 6.1.
    User "wlisystem" has not been assigned task "Task 1". User "wlisystem" has not been
    assigned task "Task 1". Start server side stack trace:
    Workflow error: com.bea.wlpi.common.WorkflowException: The server
    was unable to complete your request. User "wlisystem" has not been
    assigned task "Task 1". at com.bea.wlpi.server.worklist.WorklistBean.taskExecute(Unknown
    Source) at
    com.bea.wlpi.server.worklist.WorklistBean_1nnm8f_EOImpl.taskExecute(WorklistBean_1nnm8f_EOImpl.java:151)
    at
    com.bea.wlpi.server.worklist.WorklistBean_1nnm8f_EOImpl_WLSkel.invoke(Unknown
    Source) at
    Thanks,

    Just to be a little more clear, this works fine from the
    Worklist Swing application but the same gives an error when
    I execute from JSP page. The task seems to execute properly
    but still the JSP page gives an error as shown below.
    Anyone has experience with JSP workjlist on WLS 7.0 please??!
    "SLN" <[email protected]> wrote:
    >
    Hi,
    I am having problems executing a task thro' Worklist JSP. My env. is WLS
    7.0 on Windows
    NT.
    I can do a Start Workflow and then click on the appropriate template.
    Then, when I click on the task, I get the error (see below)
    Any help please? This used to work fine in WLS 6.1.
    User "wlisystem" has not been assigned task "Task 1". User "wlisystem" has
    not been
    assigned task "Task 1". Start server side stack trace:
    Workflow error: com.bea.wlpi.common.WorkflowException: The
    server
    was unable to complete your request. User "wlisystem" has not been
    assigned task "Task 1". at com.bea.wlpi.server.worklist.WorklistBean.taskExecute(Unknown
    Source) at
    com.bea.wlpi.server.worklist.WorklistBean_1nnm8f_EOImpl.taskExecute(WorklistBean_1nnm8f_EOImpl.java:151)
    at
    com.bea.wlpi.server.worklist.WorklistBean_1nnm8f_EOImpl_WLSkel.invoke(Unknown
    Source) at
    Thanks,

  • CProject user cannot edit (confirm) their assigned tasks

    Dear Experts,
    we are facing an unexpected behaviour on cProjects: project user cannot edit (confirm) their assigned tasks, because the authorizations at the task level for user appear as Read (authorizations view on task), while on the project definition, for the same tasks the user is assigned Write permissions. Something must be happening in between that we are not getting right.
    More details on the configuration behind and the process:
    - In Project definition level, project roles (coming from a project template) are staffed to users (business partners)
    - Project roles coming from project template are assigned to a project role type with Default authorization set as Read. Because we want all project users to be able to access in read mode to the whole project and tasks; and then be able to edit (Confirm) only their assigned tasks. Except for the project manager role, who has a different project role type assigned wih Admin default authorization set
    - After making the staffing at project level, this seems to be working fine: all project users have read access assigned at project structure level and rest of tasks, except the project manager who has Admin authorization. And for each task, the user assigned to the task has write permissions.
    - But when a user open the task from the tasks dashboard, and go to the Authorizations tab, then the user has Read permission for the same task, which causes the consequence of not being able to Edit and Confirm.
    Can you guide us to understand why the Write authorization is being overriden to Read at user access? Should not the default authorization “read” at project role type be overwritten by the assignment of the user to the task?
    Maybe is there other configuration setting that is missing or needs to be checked?
    Many thanks in advance,
    Roberto

    Thanks Ravi, I answer your questions:
    1) How did you give write access? - Manually in ACL-Authorisations tab or through selection of responsible role/person in basic tab.
    we use the second option. We create projects from templates that have roles assigned to tasks. After we complete staffing in the project, we assign users (business partners) to each project role. After this, automatically, users are assigned as task Responsible and receive their tasks assigned in the task dashboard.
    Question here: since we do not use Resources, the field responsible resource is not used/filled- Is this required?
    2) Whether the task accessed by the user is in 'Released' status?
    yes, tasks are released, so that ther users receive the task in Tasks Dashboard, but due to the permissions issue, they cannot confirm task
    The only possible workaround we have found to solve the issue is to assign Write authorizations to all users, but at project level. So the consequence is that users can edit all the project tasks (not only their assigned tasks) and we want to avoid that. We want users to have read access to whole project and write access to their assigned tasks (by staffinf Users to roles)
    thanks again for help.
    best regards,
    Roberto

Maybe you are looking for