Users are being logged into the desktop before the mapped drives GPO takes effect

We are using a Group Policy object to map network drives to our users.  We are getting reports that the user are being logged into their desktop before the drives are mapped, causing a program that points to the mapped drive to not be able to access
files on that drive.  Once the user goes into Computer and double clicks on the drive, they are then able to see the files on the drive and the program is able to access them as well.
We have added another GPO to institute the "Always wait for the network at computer startup and logon" policy to try to fix the issue, but it has not solved our problem.
Thanks in advance for any assistance.

>   Once the user goes into Computer and double clicks on the drive, they
> are then able to see the files on the drive
Did you check the "reconnect" option?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

  • Win svr 2008 r2 ent - user can not log into remote desktop after installing march's 2015 important updates

    we installed march's 2015 important updates onto all of our servers.  three of our servers are not allowing RDP.  
    these servers have windows server 2008 r2 enterprise sp1  installed.  
    we enter in the username and password in the rdp dialog box and click on ok.  the rdp dialog box comes back for us to enter in the username and password.  
    we do have kb3046049 and kb3002657 installed.  
    is there a v2 of kb 3002657 for windows server 2008 r2 enterprise?  
    on one of the servers
    1. I disabled rdp
    2. stop and start the following services 
    remote desktop configuration
    remote desktop services
    remote desktop services usermode port redirector 
    remote procedure call
    3. enabled rdp
    4. added the users allowed to rdp into  server
    This allowed us to RDP into that box with the username and password.  
    But the other two servers the steps performed above did not work.  
    Any solutions for Win Svr 2008 R2  enter sp1?

    Thursday, March 19, 2015
    This is a summary of the new and changed content scheduled for release on Thursday, March 19, 2015.
    New security content:
    This has nothing to do with this issue in this thread, it just happens to have been published today and yet no kb is public.
    Security Update for Windows Server 2003 (KB3048051)
    Locale: All
    Deployment: Windows Update, Microsoft Update, Automatic Updates, WSUS, and Catalog
    Classification: Security Updates
    Target platforms: Windows Server 2003 and Windows XP
    Approximate file sizes:
    Windows Server 2003 update: ~ 196KB
    Description:
    Install this update to resolve an issue which requires an update to the untrusted certificate store on Windows systems and to keep your systems up to date. After you install this update, you may have to restart your system.
    http://support.microsoft.com/kb/3048051
    It is related to the SSL cert revocation and Microsoft is very lame these days and gets the code on MU but can't sync up the KB.
    See:
    * Microsoft Security Advisory (3046310)
    - Title: Improperly Issued Digital Certificates Could Allow Spoofing
    - https://technet.microsoft.com/library/security/3046310
    - Revision Note: V2.0 (March 19, 2015): Advisory rereleased to
    announce that the update for supported editions of Windows
    Server 2003 is now available. See Knowledge Base Article 3046310
    for more information and download links.

  • MacAir using AD for authentication. In AD, there is a network home assigned to that user. When logging into that account on the Mac, it takes 1-2 minutes after entering credentials, before displaying an error that it could not connect to it, every time.

    In our AD, all users have a network home that is set (smb://home for example). For some of our Mac users using AD for authentication, there is a 1-2 minute delay between entering their credentials and the OS being presented. The OS does not present itself until the user dismisses the alert: "There was a problem connecting to server home".Local users on the same machines do not have that problem.
    It remains in the dock as User's Network Home as a ? that I am unable to remove, and there is also a 'Unknown' in the log-in items for the user as well (that I am also unable to remove).
    Is there anyway to disable this share? Or to stop the Mac from trying to connect to it before loading the OS?

    In our AD, all users have a network home that is set (smb://home for example). For some of our Mac users using AD for authentication, there is a 1-2 minute delay between entering their credentials and the OS being presented. The OS does not present itself until the user dismisses the alert: "There was a problem connecting to server home".Local users on the same machines do not have that problem.
    It remains in the dock as User's Network Home as a ? that I am unable to remove, and there is also a 'Unknown' in the log-in items for the user as well (that I am also unable to remove).
    Is there anyway to disable this share? Or to stop the Mac from trying to connect to it before loading the OS?

  • Find Out how many users are currently logged into

    Hi,
    Is there any way for us to find out in IDM application
    who are all the currently logged in active users.
    If I run audit log report I can just get all the users logged in and logged out and not the currently logged in users.
    This is just administartive purpose to , its not a requirement.
    Thanks,
    pandu

    Try /debug/Show_CacheSummary.jsp. Possibly the user session section will be of help.

  • Users cannot log into Remote Desktop after 3/11/2015 update!

    I have a simple network where users can log into a Windows SBS 2008 server with Remote Desktop to access various applications.  This worked quite smoothly until this morning, after the updates of last evening. (3/11/2015)
    When users tried to log into the Remote Desktop this morning their credentials were rejected, as if their username and/or password were incorrect.  Even I (as the administrator) could not log in remotely.  Finally I connected a monitor and keyboard
    directly to the server and was able to log in without an issue.  After logging in directly I was able to connect through remote desktop.
    This method worked for my other users as well - after I logged them in directly they were able to use remote desktop no problem.
    The trouble is that I have a couple dozen users, and this is an issue that should not be occurring.  What happened in the last update to cause remote desktop to reject users credentials?  Why does it only work after the user logs in directly? 
    And most importantly, how do I fix this?
    A few notes:
    Simply browsing for files on the server also asks for the user's name and password, and this works as well.  This is only a remote desktop issue.
    I have already checked to make sure the domain was correct.  It was.
    I have already checked to make sure the usernames and passwords were correct.  They were.
    I have already checked to make sure this was not a unique issue for a single (or limited number) of users.  This issue effected
    all users all the network.
    Thank you very much for your help,
    Dustin

    I'm curious here...  If the server is rebooted, does it put the RDS users back into a "credentials failed" situation?  If so, could you please have them log in with credentials:
    domain.local\username    (I suspect they may be currently using domain\username)
    and see if that fixes the RDS problem without having to first log into the server directly.
     The ".local" may be ".lan" or ".somethingelse" depending on how you initially configured your domain, but the default for SBS 2008 is ".local"
    Merv Porter
    =========================
    That's a good question - the server will auto-reboot this evening and I'll test again in the morning. 
    You are correct that we've been using domain\username.  I tried domain.local\username (which is the way we've set up), and that did not work either.
    I'll let you know how things turn out tomorrow morning.  I don't want to mess with my users anymore today. :P
    Dustin

  • How to capture the user who has logged into the portal.

    Hi,
    How do I capture the user who has logged into the portal.
    HOw do I retrieve the first name and last name of the logged in username.
    Could someone provide me a related link or PDF to work on this.
    Thanks,
    Suvarna

    Hi suvarna,
    Check the following code
    ISearchResult rst = UMFactory.getUserFactory().getUniqueIDs();
                      IUserFactory usf = UMFactory.getUserFactory();
                      IUser iuser = null;
                      IUserListElement userElement = null;
                      int i = 0;
                      while (rst.hasNext()) {
                            iuser =
                                  UMFactory.getUserFactory().getUser(rst.next().toString());
                            String email = iuser.getEmail();
                            String fname = iuser.getFirstName();
                            String lname = iuser.getLastName();
    regards
    Anil Dichpally

  • How do I fix ? when I log into my yahoo mail the words are so small I cant read it

    Any place else it is fine but about a month ago when I log into my yahoo mail the words are so small I can barley read it. If I go to internet Explorer it is fine but I don't want to use that. It is only in my email.

    Try this :- https://support.mozilla.org/en-US/kb/font-size-and-zoom-increase-size-of-web-pages?esab=a&s=How+to+change+the+size+of+fonts+in+yahoo+mail&r=0&as=s
    This may help you . Let us know if it work !

  • After update to 11.3.1 users are not logged in to the ZAA

    Hi,
    we did a update from 11.2.3 to 11.3.1 a few weeks ago. All works fine but there is one problem. A lot of users are not logged in to the ZAA. If i try to start a remote session with the username i get the message the user is not logged in to any device.
    If i connect me to the device and look at the ZAA the user is not logged in and i can not log in because i get the error message that the username or password is wrong.
    The solution is to go to the registry -> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\Cache\domain.local and i have to delete the user.
    After that the login works fine
    Sometimes i have to delete the user in this registry key too -> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\CachedUserZenNames
    Is that a known bug? What can i do to solve that problem?

    I would recommend an SR.
    You should not have to do that.
    There were some similar bugs in the past, but were fixed in 11.2.x and
    should not exist in 11.3.x at all.
    On 10/15/2014 7:26 AM, SteffenMuch wrote:
    >
    > Hi,
    >
    > we did a update from 11.2.3 to 11.3.1 a few weeks ago. All works fine
    > but there is one problem. A lot of users are not logged in to the ZAA.
    > If i try to start a remote session with the username i get the message
    > the user is not logged in to any device.
    > If i connect me to the device and look at the ZAA the user is not logged
    > in and i can not log in because i get the error message that the
    > username or password is wrong.
    >
    > The solution is to go to the registry ->
    > HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\Cache\domain.local
    > and i have to delete the user.
    > After that the login works fine
    > Sometimes i have to delete the user in this registry key too ->
    > HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\CachedUserZenNames
    >
    > Is that a known bug? What can i do to solve that problem?
    >
    >
    Going to Brainshare 2014?
    http://www.brainshare.com
    Use Registration Code "nvlcwilson" for $300 off!
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Technical Support Engineer
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

    Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

    Thanks for responding. Everything seems to work right except for the when I plug into the 737. Ok let me see if I can be more clear. I had this set up done with two representatives of Neumann, and DBox. Here it is I hope this helps. 32 Channel snake (24 Inputs 8 outputs) Channels 1-8 from snake to my Octopre for Drums. From Octropre output quarter inch lines into the Apollo 2, quarter inch input. This is so that the Apollo 2 is taking the drum tracks. Snake Channel 9-12 into Apollo 1 channels 1-4 xlr. Snake Channel 13-16 into Apollo 2 Channels 1-4 xlr. Snake Channel 17 into the 737, output of 737 into Channel 5 of the Apollo 1 quarter inch.
    Ok The Dbox. Sum output L&R into channel input 7&8 of Apollo 1. Apollo 1 output channels 1-8 into summing input channel 1-8 of Dbox. Apollo 1 main L&R going to main analog input L&R of Dbox. Spid out to DAW input of Dbox. I have both ADAT of both Apollos connected by optical wire. Also have port 2 of Apollo 1 into port 1 of Apollo 2 connected by Firewire.  Let me know. Hope I got it right. Thanks for responding.

  • Logging into Remote Desktop

    I keep trying to log into remote desktop from my computer. The credentials are correct and work from other computers but every time I try to log in they say access denied. 

    Hi,
    I agree with that you may use the incorrect user account or format.
    You can try the following format.
    RemoteComputerName\UserAccount
    Or
    Domain\UserAccount
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • New user...how do you drag or move or copy a file or folder from the desktop to an external drive?  I have tried dragging and copy/pasting.

    new user...how do you drag or move or copy a file or folder from the desktop to an external drive?  I have tried dragging and copy/pasting.

    My guess the problem you are running into is the drive is formatted for a PC as NTFS. OS X can read files from NTFS however it cannot write to it. Check the formatting on the drive, if it's NTFS then it should be reformatted to Mac OS Extended (Journaled), you can use Disk Utility to do this.
    If you still have a PC and want to share the EHD with the PC and Mac please read MacWorld's Share an external drive between a Mac and a PC article.

  • ORA-02399: exceeded maximum connect time, you are being logged off

    What could have been the cause of "ORA-02399: exceeded maximum connect time, you are being logged off"? I am always getting that issue even if I am continously doing some query.

    There's a resource limit active (RESOURCE_LIMIT=TRUE in pfile/spfile) and a user_profile (which limits the connection time) dedicated to the user.

  • I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device

    I have an iTunes account where I have downloaded Digital movies & I am able to see the list on the desktop of the original downloads. When I log on another device with my login I do not see my list to access them. Why can't I access from another device

    Hey GingCarv,
    Great question. You'll want to download the movies from your purchase history. The following article explains how to do so:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Note: At this time, movies are not available for automatic downloads.
    Thanks,
    Matt M.

  • If someone logs into your account at the same time

    If someone on another computer logs into your account at the same time you are....and say you are in the middle of a conversation with someone, can the other person that logged in from a separate location see your conversation and video???

    I'm on Windows, both CS5 and CS5.5, and the Shift key "pinning" works with both. I can guarantee you this edit process works with both platforms equally.
    From the Help docs, Move clips in a Timeline panel:
    To place the video and audio portions of a clip
    into tracks you specify, drag the video portion to the destination
    video track. Press and hold Shift. This will pin the video portion
    to the specified video track. Continue holding Shift and drag downward
    past the bar separating video and audio tracks. Release the mouse and
    release Shift when the audio portion of the clip lies over the destination audio
    track.

  • My voice entered texts are being translated into Spanish...Help!

    Starting this morning, my voice entered text messages in iMessage are being translated into Spanish and I don't know how to stop it.
    Anyone?

    Solved...
    I selected a "stuck on Spanish" tag link after I posted and the answer was there.
    I must have selected the Globe icon next to the microphone and when I touch it once, it changes my keyboard to Spanish, if I touch it again, it changes into Chinese Trad.
    I held down the Globe icon and selected "English" and all is working again, but I don't like the proximity of the globe icon to the mic icon, as everytime I touch it by accident, my keyboard changes and my text gets translated into that language.....EEEEEK!
    I've been playing with lanuages and have added these foreign keyboards, I need to remove these keyboards now.

Maybe you are looking for