Using 36.0.1 clicking Help does not show the latest update 36.0.3. Why?
I feel nervous about directly using pop-up reminder messages to update software. I am aware that there are frequently false messages that appear to be from a company whose software I use, and that clicking on them to update, can cause seious problems. Therefore, I always go to the companysitge to get an update. When I tries to do that for 36.0.3,, I was told to click on "Help->About Firefox", and the resulting window whould have a place to click to install the latest update version. WhnI did this, the window showed no such option. Why?
When I tried to send a 25 KB GIF file with the image of the About Firefox window, it never completed uploading
Hi BuzzBloom, you are correct, when you click "Help->About Firefox" then the update process begin immediately and after the update ends then exist the option "click to install the latest update....".
you can update firefox if you download the full installer from the next link and run it over your current version : https://www.mozilla.org/en-US/firefox/all/
thank you
Similar Messages
-
My homepage does not show the latest page when I open Firefox
I have set MSN as my homepage but when I open Firefox it does not show the latest MSN page.
'''''Has the site worked normally in Firefox before?'''''
When you have a new problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
This will open a window listing the site's cookies, which you can remove individually.
Then try reloading the page and logging back in. Does that help? -
HT4623 My iPad 2 does not show the Software Update option.
My iPad 2 does not show the Software Update option. When I try to update with iTunes the iPad times out.
Disable or turn off your anti-virus and firewall software on your computer and try the download again.
-
My iphone4 does not show the "software update" choice under General so how do I update my iOS?
You can alternatively connect your iPhone to iTunes on your PC and upgrade your iOS from there.
-
OS X has updated but it does not show the present update
https://www.dropbox.com/s/z8yynop14dciiob/Screenshot%202014-06-04%2012.55.06.png
Trying to install OS X Server and it says that I have to update to 10.9.3
Which I did as you can see.
I Rebooted again doing a Command/Option/ P R to insure that all cache memory was deleted and Still it will not show the update for 10.9.3
What can I do now to force it to read 10.9.3 PleaseTry re-indexing Spotlight.
Spotlight – Re-index
If that doesn't work, try running the combo update.
10.9.3 Combo -
when i use location services through wi-fi my ipod doesnt show my exact location and uses china as default location , so i am encountering problems while yousing apps like watsapp or wechat etc. plz give me a solution
For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that the iPod can't see a nearby router that is in Apple's database. or finds one that has it location as China. Apple continuously updated their database based on info they obtain from iPhones. However, I do not know if that applies to India. No one has been able to find a way to inform Apple of a router or correct is location.
-
HT4623 How do I instal the software updates? My iphone does not show the software update
How to do I instal the software updates to my iphone?
Same as always.
Tun on your computer.
Open itunes
Connect iphone.
That's it. It will prompt you to update if one is available -
Forms Not showing the Latest Updated one
Hi,
I have a form deployed on 10g AS 9.0.4. After enhancing a form and deploying it on the AS: i cannot see the modified changes (it shows me the previous version of the form). This happens only for some forms, However if i create a sample form and deployed it and after enhancing the sample form i can see the modified changes.
Please help me in this regards
I am using 10g AS 9.0.4
RegardsI'm afraid I can't offer any explanation for this. The feed seems to be perfectly OK, the episodes I checked downloaded OK, but the Store plainly hasn't checked the feed since shortly after March 5th. This sort of odd thing does happen very occasionally - sometimes it sorts itself out eventually. There isn't really anything you can do about the feed to help matters, as far as I can see. You could try approaching iTunes Support, but be warned that you will probably just get a form answer which doesn't address the problem. Go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.
-
When I try to watch any video clip I get this:
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
I tried clicking on the Adobe Flash Player. It said it accepted it but it did not make a difference.
Can anyone help?
Thank you!This did not work
On Mon, Oct 27, 2014 at 8:59 PM, Apple Support Communities Updates < -
hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date
Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
When I am viewing the latest message in a conversation in Mail in the preview and want to reply, I hit reply and it does not include the latest message? I have to double click the latest message to open it and then reply. I find this irritating and would like to skip this step and be able to reply from preview and include that message. Am I missing a setting to fix this?
I have found that if you have highlighted some text in the message and then hit reply, the highlighted section is the only bit included in the reply. You need to click on the message in the middle list rather than the preview pain on the righthand side and it should reply normally. To check it's doing this, select a message in the middle section of the screnn then use the down arrow to drop to the next message. Hit reply, and it should reply normally. I hope this helps.
-
I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?
Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help
Hi Kevin,
The iPhone 4S comes automatically loaded with iOS 5, and any updates after iOS 5.0 can be completed directly from on the phone in Settings > General > Software Update. If you are having trouble using iTunes to update software, I suggest you reset iTunes so that you can pair your phone to the computer again, because if you can't see the serial number and capacity, that generally means your phone isn't paired. For any problems this doesn't fix, please contact Apple directly through their automated help line, 1(800)MYAPPLE. -
How do i update 10.5.8 if my macbook does not show any software updates?
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
You haven't actually asked a question, but as stated you should only download Flash Player directy from Adobe.
Nor have you said what version of OS X and Safari you are running.
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
Maybe you are looking for
-
Hello! I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all
-
"The Installer Disc Could Not Be Found."
I have downloaded an ISO image to a USB, as well as the Windows support drivers from Apple. What am i missing? How can i install windows from here? I am running on MAC OS X 10.8.4 and Boot Camp 5.0.3
-
Importing video from Sony Handycam
What is the proper workflow for importing video from my Sony DCR SR82 into iMovie '08? Anyone do this successfully?
-
I found some threads on here about Windows Search not working on DeDup volumes? Most of the threads are pre-R2 timeframe so I am checking in to see if there is any updated info on if this was fixed in R2? It seems this is a critical feature if you ar
-
I updated my Mac and everything was fine until i had to restart it. My Photoshop's keyboard short cut became all random like this: I tried restarting my computer again but it has not changes. The most weird part is that when i tried to change the sho