Using a Single Credentials for the Multiple Users
Hi Oracle Team ,
We are in the process of creating a Android App and communicate it to DMS for all the data to and fro .
Following this post Creating the Application User dynamically on the device , we tested the App with single credential ,
We found a Strange behavior of the App when it is tested from the two different devices with same username/pwd/url,
Usecase :
Device 1 : Added 5 records and synced . Sync successful .All data in server
Device 2 : Added 5 different records and synced . Sync Successful . No data of Device 2 in server but all the data added by Device 1 and which was in server before sync is in Device 2 .
The data added by Device 2 is missing , where it is ? , I checked the data in the $tables as well, no data ,
Is it a Snapshot issue ? , Why data is missing ? is it a defect or can't use DMS that way ?
Thanks,
Spurthi
Hi Spurthi,
This is not a reasonable use case. There are technical details to be explained, but just to clarify, the proper use case is to run one client (you can say one DMS user) on one device.
Thanks,
Winnie Hu
Similar Messages
-
Hi..I have a requirement to create An opportunity for the multiple campains
I have a requirement to create an single opportunity for the multiple campaingns..how can we do this..??
regards
B.ManiHi Nizam,
You can check the component 'BT111H_OPPT' view 'BT111H_OPPT/ItemsList ', context node 'BTADMINI' has onclick action implemented for item list in opporrtunity transaction. In the same way you can do the coding.
Hope this helps.
Regards,
Ruby. -
HT1660 how can I use one single library for all users on the same laptop?
how can I use one single library for all users on the same laptop?
You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library. -
Multiple sessions for the same user
Hi,
The scenario is like this. The user is logged into the system using JAAS and
has a session object created. I want to create a new session for the same user
with the already available credentials. This is to provide the same user the access
to the application in another window with different session object. How can do
that in Weblogic 8.1 server ?
thanks in advance,
Krishna.Hi
I think it would be easier to enable session time out settings using GPO considering you work in a domain environment..
Having session timeouts settings you could say... hey after 15 min of inactivity disconnect the user and then after 15 min of disconnected session log him off
Take a look at this URL: http://technet.microsoft.com/en-us/library/cc754272.aspx
Hope this helps
Best regards
Joaquin Camarero Muñoz -
Hello, sorry for my english!
I am currently creating a form. This form contains 20 pages. For more comfier to fill it in, I want it to be loaded 1 page to 1 page. The user sees on the screen a single page, for the second page (and to fill it in) he will click a button "next page"!
Is it possible to do this with adobe acrobat pro?
In the case of a negative answer, can Indesign do this?
thank you.Technically it's possible to use a script to prevent someone from going to the next page unless they click a button, but I think it's a bad idea and very user un-friendly. You can add a button that will take someone to the next page, but don't try to restrict them from doing so themselves if they so wish.
-
Hi All,
we have a Citrix XenApp 7.5 Farm with Windows Server 2012 R2 Servers and multiple (english, german, italian, spanish, french...) languages installed.
I've created a GPO with settings 'Restricts the UI languages Windows should use for the selected user' to for example 'German'.
Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German.
It seems that the GPO is not changing all settings correctly to german.
Does anybody know what could be wrong?
best regards,
SiegmundHi Siegmund,
>>Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German
Based on the description, the policy setting should have been applied successfully. Here, did we logged onto the server via remote desktop services? If yes, what's the keyboard layout on the computer we used to RDP to the server? Before going further,
I assume that this can be caused by Auto detect Remote Keyboard layout feature introduced since Windows Server 2008.
Regarding this point, the following artcile can be referred to for more information.
Windows 2008 R2 Language Bar keeps changing Keyboard Settings
http://www.microsoftpro.nl/2011/02/24/windows-2008-r2-language-bar-keeps-changing-keyboard-settings/
Note: For the above website is not hosted by Microsoft, the link may become invalid without notice and Microsoft doesn't guarantee the accuracy of the information.
In addition, the following thread can also be referred to for more information.
2008 R2 Session Host with MUI controlled via Group Policy
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e14955a-80f9-40aa-9741-fc8609f4ad09/2008-r2-session-host-with-mui-controlled-via-group-policy?forum=winserverGP
Best regards,
Frank Shen -
When I go to update my software using the app store download, it always asks for the previous user's ID, not mine (my IT guy at school's-I am a faculty with admin priviledges). I have signed in as me, have set the main preferences login user as me,and everywhere on the laptop I can use my apple ID except here. It always shows me a greyed out ID of my IT. How can I reset this to my ID? It doesn't give me an option to change the user ID, only a link to reset password. I reset it, but it did not change the problem. Can someone help me?
It's not an ID problem, it's an ownership problem.
When someone uses their personal Apple ID to buy and download content, the content is licensed to them and has their Apple ID engrained in it's DNA. It is an anti-piracy program. And when that personal Apple ID is used to setup a new Mac, it involves the Mac itself, the shipping OS and any pre-installed apps as well.
It's not the correct way to handle Macs that belong to a business or an institution. And had it been handled correctly they would not now be in this predictument needing a drastic remedy. -
I bought license for adobe creative cloud but i can't use any of the programs. I already used the 30 days trial and after that i couldn't use a single one of the programs. can anybody help me...
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
Convert multiple rows into single rows for the respective index name
Dear Experts,
I want to convert multiple rows into single rows for the respective index name,
Here is my query.
SELECT user_tables.table_name, user_indexes.index_name, user_ind_columns.column_name
FROM user_tables
JOIN user_indexes on user_indexes.table_name = user_tables.table_name
join USER_IND_COLUMNS on USER_INDEXES.INDEX_NAME = USER_IND_COLUMNS.INDEX_NAME
where user_indexes.index_name not like '%PK%' AND user_ind_columns.column_name NOT LIKE '%SYS%'
ORDER BY user_tables.table_name,user_indexes.index_name;
Result of previous query
TABLE_NAME
INDEX_NAME
COLUMN_NAME
T1
IDX_ACCNTYPCFG1
ENABLE_SERVICE
T1
IDX_ACCTTYPCFG1
ACC_CODE
T1
IDX_ACCTTYPCFG1
ACCTYPE
T2
IDX_ACCTTYPCFGAPP1
ACCTYPE
T3
IDX_ACTLG1
MOBILE_NO
T3
IDX_ACTLG1
ID
Desired output required is
TABLE_NAME
INDEX_NAME
COLUMN_NAME
T1
IDX_ACCNTYPCFG1
ENABLE_SERVICE,ACC_CODE,ACCTYPE
T2
IDX_ACCTTYPCFGAPP1
ACCTYPE
T3
IDX_ACTLG1
ACCTYPE,MOBILE_NO
please help.Maybe
with
user_tables as
(select 'T1' table_name,'IDX_ACCNTYPCFG1' index_name,'ENABLE_SERVICE' column_name from dual union all
select 'T1','IDX_ACCTTYPCFG1','ACC_CODE' from dual union all
select 'T1','IDX_ACCTTYPCFG1','ACCTYPE' from dual union all
select 'T2','IDX_ACCTTYPCFGAPP1','ACCTYPE' from dual union all
select 'T3','IDX_ACTLG1','MOBILE_NO' from dual union all
select 'T3','IDX_ACTLG1','ID' from dual
select table_name,
case index_name when 'IDX_ACCNTYPCFG1' then 'IDX_ACCTTYPCFG1' else index_name end index_name,
listagg(case column_name when 'ID' then 'ACCTYPE' else column_name end,',') within group (order by null) column_name
from user_tables
group by table_name,case index_name when 'IDX_ACCNTYPCFG1' then 'IDX_ACCTTYPCFG1' else index_name end
TABLE_NAME
INDEX_NAME
COLUMN_NAME
T1
IDX_ACCTTYPCFG1
ACCTYPE,ACC_CODE,ENABLE_SERVICE
T2
IDX_ACCTTYPCFGAPP1
ACCTYPE
T3
IDX_ACTLG1
ACCTYPE,MOBILE_NO
Regards
Etbin -
Unable to get the SharePoint 2013 List names using Client object model for the input URL
Please can you help with this issue.
We are not able to get the SharePoint 2013 List names using Client object model for the input URL.
What we need is to use default credentials to authenticate user to get only those list which he has access to.
clientContext.Credentials = Net.CredentialCache.DefaultCredentials
But in this case we are getting error saying ‘The remote server returned an error: (401) Unauthorized.’
Instead of passing Default Credentials, if we pass the User credentials using:
clientContext.Credentials = New Net.NetworkCredential("Administrator", "password", "contoso")
It authenticates the user and works fine. Since we are developing a web part, it would not be possible to pass the user credentials. Also, the sample source code works perfectly fine on the SharePoint 2010 environment. We need to get the same functionality
working for SharePoint 2013.
We are also facing the same issue while authenticating PSI(Project Server Interface) Web services for Project Server 2013.
Can you please let us know how we can overcome the above issue? Please let us know if you need any further information from our end on the same.
Sample code is here: http://www.projectsolution.com/Data/Support/MS/SharePointTestApplication.zip
Regards, PJ Mistry (Email: [email protected] | Web: http://www.projectsolution.co.uk | Blog: EPMGuy.com)Hi Mistry,
I sure that CSOM will authenticate without passing the
"clientContext.Credentials = Net.CredentialCache.DefaultCredentials" by default. It will take the current login user credentials by default. For more details about the CSOM operations refer the below link.
http://msdn.microsoft.com/en-us/library/office/fp179912.aspx
-- Vadivelu B Life with SharePoint -
Microsoft Word Has Not Been Installed for the Current User
Hi, everybody
I'm just starting our attempt to put together ZfD app packages for MS Office 2007. I've tried 2 different route with poor results for each. I'm looking for guidance and suggestions and, hey really, the simple final solution. :)
Objectives: Each app package will install locally one of the Office apps (e.g., Word) if it is not installed and then launch it, otherwise it will launch it. It gets installed locally to the C: drive using all the MS default choices, but runs from the desktop ZEN/NAL shortcut. All desktops are XP, not Vista or W7.
Routes tried and failed...
1) Simple app, uses distribution and run scripts to figure out if already installed, then installs using network shared drive and config.xml file for just the one app. The result ought to work -- no particular error in the package, those are fixed -- but what happens is something different each time with the MS setup.exe, and it never does complete without its own error (various and different each time). So, this appears to be completely unreliable because launching MS's setup.exe from a simple app is unpredictable and incomplete.
2) Snapshot of a successful setup.exe and config.xml install. This ALMOST works... well it does in fact work but the snapshotted app gives an error once it finishes launching -- "Microsoft Word Has Not Been Installed for the Current User" -- and exits. From the research I've done on this message, the MS program sees the "wrong" Windows profile on the destination environment, compared to that in the snapshot, and figures it's now been installed from a bootleg copy of Office 2007.
At this stage all I can think of is expletives. We've paid for everything, I've followed all the usual and customary steps, played by the rules, been polite (and also used the necessary computer swear words), and now I just want to insult everyone in Microsoft's marketing department for ruining everyone's life yet again. Can't we just do this, is it too much to ask!?!
Please help me. What is really going to work for distributing and maintaining Office 2007 apps using our ZfD environment? ALL USEFUL SUGGESTIONS WELCOME. Thank you. Bless you.
-Kent S.
Be strong as a ship and wise as a whaleThese questions are really best in the Microsoft Office Forums.
These are MS Office Questions not ZEN Questions.
Novell did not design Microsoft's Office Install.
I have nothing against snapshots, but it does not work great with the Office
installs, which you yourself know since you are posting here with problems
based on that.
And your other method you are trying with the break out is not working well.
We also know that from experience.
We can tell you that the way most people install it and the way most people
succeed doing it, is by doing it the way recommended and designed by
Microsoft.
ZEN does that just fine.
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"KentFSmith" <[email protected]> wrote in message
news:[email protected]...
>
> Thank you, Grimlock (-Grimlock?-)
>
> Through a google search I encountered a very close suggestion, and the
> poster said they couldn't remember the name of a MS utility but that
> there was one that would break out the individual MSIs from the Office
> 2007 setup.exe bundle. The dependent app appears to be a simple and
> possibly elegant solution, but without a good way to break out the MSIs
> I don't see how to do anything other than with a config.xml ('Config.xml
> file in the 2007 Office system'
> (http://technet.microsoft.com/en-us/l.../cc179195.aspx)).
>
> Do you know of that utility and where I can find it?
>
> There is a lot of history here now of just doing the individual
> applications. Everyone gets Word and Excel, but much fewer get
> PowerPoint and Access. All other reasons aside, a compelling one is the
> reduced number of help calls to the Help Desk here. Occasionally we
> also just run the whole Office install for someone who needs some of the
> odd utilities, but that is easily cost-justifiable for us to break them
> out as exceptions. Otherwise, we focus 90% of our support on just Word
> and Excel and it pays off nicely.
>
> If we switch to putting full Office 2007 on all PCs then there may be a
> better approach that include other tools than ZfD, such as the fact that
> we replace 1/3 of all PCs in the organization each year (so that no
> hardware is more than 3 years "behind"). We could put 1/3 of all Office
> 2007 installs into the new PC image. But we still need to support all
> the use of the apps after the install, so ZfD MUST work well, it simply
> MUST work well or we're screwed, to use the vernacular. Also, just
> switching from what we've been doing for years -- single app orientation
> -- means introducing new-ish issues that have to discover and explain to
> our comrades, and to adjust our orientation with unknown future costs.
>
> But that may end up being the simplest adequate solution. And that's
> what I want.
>
> -K
>
> grimlock;1883526 Wrote:
>> Craig Wilson wrote:
>> > You should really focus on #1.
>> > Snapshot is not the way to go.
>> >
>> > Details about what is Not working or what random behavior may help
>> folks.
>> > Ask in the MS forums may help too. dont' mention zenworks.
>> > Just say you are installing as Administrator from a share and getting
>> these
>> > errors.
>> >
>> > While not 100% accurate, it should be good enough to get some good
>> feedback.
>> >
>>
>> Nor is installing 1 app at a time. Install the whole suite, have an
>> icon for each app that runs the exe for that app with a dependency on
>> the another app that points to the installer msi.
>>
>> If any user runs any app, it will run if the executable is there
>> (meaning it's been installed). If the executable is not there then it
>> calls the dependent application (the installer app) and installs it,
>> and
>> then runs it.
>
>
> --
> KentFSmith
> ------------------------------------------------------------------------
> KentFSmith's Profile: http://forums.novell.com/member.php?userid=2927
> View this thread: http://forums.novell.com/showthread.php?t=391573
>
> -
In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?
Please don't post the same question multiple times!
-
Forms application not opening for the end user.
I have an Oracle Form that works fine when I copy the url into the browser and user the login credentials of the schema owner. But when I use the credentials of the end user, it does not open the form. I receive no error messages.
To troubleshoot, I opened the form in Forms Builder, log in as the end user and Compile, but I get no error messages.
I also took a call to a server-side procedure that is in the Form, and ran it in SQL Developer, once again while logged in as the end user, and it ran successfully.
I’m not sure what could be wrong. Any suggestions on how to debug this?To troubleshoot, I opened the form in Forms Builder, log in as the end user and Compile, but I get no error messages.What happens if you run the form from forms-builder with that credentials.
-
Single email for a multiple steps Job
Hello,
Is it possible to send output from 2 steps in a single job in a single email? I have setup a job that has 2 steps and I have defined the recipient email address in the spool list recipient in SM36 but SAP sends 2 separate emails for these steps instead of a single email.
Are there any way to send a single email for the job instead of a email for each step?
Thanks in advance.
Mariano.Hi Mariano,
I have already replied to your query in ABAP General Section.
Please avoid posting multiple posts. Its against the SDN Rules & Regulations.
Thanks,
Babu Kilari -
How to use Add Query Criteria for the MySQL data Base in Netbeans ?
How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM
Maybe you are looking for
-
Hi, I have big problems since 2 weeks with outline, fonts, size in Ai CS6 : Numerical value are so big and I can't change it with smaller. Apparently Ai said me that comes from AiPrefs... Could you help me please. I tried to initialize my preferences
-
BDC Recording doesn't proceed after Information Message
Hi, I need to upload Vendor Master Data. I've recorded a BDC transaction and I came across an Information message in the final stages of the transaction. The activity I recorded after the information message is saving the transaction. However hen I p
-
Adding WWAN to X300 model 6476-CTO: how do I know if antenna is already installed?
It appears that it is relatively easy to add a WWAN card to my X300 (I watched the video tutorial) BUT I don't know whether or not my X300 came from the factory with an antenna pre-installed. My model is 6476-CTO I want to order the Verizon WWAN car
-
Sql Server Agent last run duration in minutes
Hello Forum Members, Can you please advise me on this: There are 5 sqlagent jobs and they run many times in a day ranging from 10 seconds to 1 hour. I would like to know the duration of run in minutes during their last run. Kind Regards, Sqlquery9
-
VBAI Interface - Get inspection Image -- Image Dest
I have a complete Vision algorithm build in Vision Builder AI and programmed a VI in Labview which started the Algorithm and uses the results to compute. This works fine. Connection between Labview and VBAI is OK and results are nicely updated. Now I