Using a subreport to list values from the data in the main report

Post Author: GarrettFitzgerald
CA Forum: Crystal Reports
I have a list of new patients, showing what insurance class they fall under. I'm summarizing the classes into 4 groups using a SQL Expression.I would like to put a subreport in the header showing what insurance classes were used, and how they were coded. I could do this by including the tables and selection criteria over again, but I'd much rather say "show these values that appear in the main data and how they were coded." Is this at all possible? Thanks.

Firstly have you tried dragging the frame around or minimising it and then re-maximising it, to coerce it into repainting?
Secondly, drop some System.out.println() lines in: one in the paintComponent() method to output the width and height, and another after the waitForID() call to output String.valueOf(image).
Thirdly, in your paintComponent() method, where you call rawImage(), change your "null" observer parameter to "this," otherwise the panel won't be notified of when the image is loaded, resulting in (unless, I think, you do coerce the repaint yourself) exactly the behaviour you're seeing.
If the "null --> this" change doesn't work on its own then let us know the results of your println()s.

Similar Messages

How to activate a different sub-report for each row in the data set as main report page breaks on each row of data in the main dataset

I am going to try asking this same question a different way as I have yet to find a working solution to my problem. I have a main report and then 8 sub reports. My main report has one data set and returns one row of data per account number. One
of the fields in the main data set is called AccountProf. My main report displays one page per Account number and then calls a different sub report based on that account's AccountProf value. The sub reports take in the account number as a parameter
and get multiple rows of data to display that accounts usage formatted differntly for each AccountProf (hence the 8 different sub report.
So far I can figure out how to do everything but setting the visibility property of each sub-reports when I have multiple accounts. If I use the following expression for the visibility property on each sub report, it makes all the applicable sub report
for all the accounts requested visible at once:
=IIF(Fields!AccountProf.Value= "USE_PLUS_DMD",False,True)
*The value in bold USE_PLUS_DMD is different for each sub report.
Here is a look at what the main report look like:
Here is the main reports data set:

Hi JasonDWilson77,
According to your description, there is a main report and 8 sub reports in the report, you want to set visibility of sub reports, if no value is passed to the parameter of sub report, the sub report will not be displayed. If that is the case, please refer
to the following steps:
1. Create a new parameter named NewAccountNumber, set its data type the same as @AccountNumber, select Allow multiple values, set Visibility to be hidden, then set all available values to default values.
2. Right-click the first sub report and open Subreport Properties dialog box, click Parameters in left pane, set name to AccountNumber, then click (fx) button, type the expression like below:
=Parameters! NewAccountNumber(0)
3. Click Visibility in left pane, select Show or hide based on an expression, then click (fx) button and type the expression like below:
=IIF(InStr(Join(Parameters! AccountNumber.Value), Parameters!NewAccountNumber.Value(0))>0 , false,true)
4. Modify parameter of other sub reports like step2.
5. Set visibility of other sub reports like step3.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

How to use the region parameter of main report for subreport chart titles?

I am using Crystal Reports 11.
I create 1 main report with 10 sub-reports that contain cross-tabs & charts. The main report has a parameter regarding 3 different areas: region1, region2, and region3.
I use the method of adding the u2018regionu2019 parameter of main report to the selection formula of the sub-reports. So, I can select 'region' from main report to controll outputs in sub-reports by region.
I use formulas for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
Since I pass the u2018regionu2019 parameter of main report to sub-reports, I have to change chart titles dynamically based on the region I select.
How can I use the region parameter from main report in the formulas to get chart titles dynamically?
Thank you in advance.

Thank you.
I am not using Chart Title with "Chart Expert".
I am using a formula for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
I drag this formula above the charts and it looks like a dynamic title. So, for product a111, the chart title would be "Region1 u2013 a111 Counts"; for product b222, the chart title would be "Region1 u2013 b222" Counts; and so on ...
Because I pass the region parameter from master report to subreport, I want to change the region part of the chart titles dynamically.
For example,
when select Region1, the chart titles should be: "Region1 u2013 a111 Counts"; "Region1 u2013 b222"; ...
when select Region2, the chart titles should be: "Region2 u2013 a111 Counts"; "Region2 u2013 b222"; ...
I want to add the region parameter into the tiltle formula.
How should I do?

Can i use one JSF component's value for other component in the same page.

Can i use one JSF component's value for other component in the same page.
For example
I have a <h:selectBooleanCheckbox id="myChk"> in my jsf page, i want to access its value for another component like:
<h:commandButton disabled="#{myChk.checked}" action="myAction" value="myValue" />
** "myChk.checked" >> I am just asuming "checked" property is available...

Bind the checkbox to a UIInput myChk property. Then you can reference this property from the page, e.g.
<h:selectBooleanCheckbox binding="#{myBean.myChk}" onchange="submit();" />
<h:commandButton disabled="#{myBean.myChk.value}" action="myAction" value="myValue" />

How do you log values from RT target to the computer?

Hi,
I am using sbRIO 9633. How do you log values from RT target to the computer?
I created a shared variable on the RT target and used them on the log VI created under "My Computer", but I get error.
I get this error..
\\192.168.1.140\temp deployment failed (error: -1967357949, IAK_SHARED: (Hex 0x8ABC8003) Unable to query Measurement & Automation Explorer for the Shared Variable Engine. Make sure the Shared Variable Engine exists on the RT target and check that the network connection is valid.).
kdm

What are your data rates? If you are producing data "continuously", you might find that Network Streams are easier and more reliable than Network Shared Variables. In any case, you need an "engine" on one side (Host or Target) or the other. I'm streaming 24 channels of 16-bit data from a PXI controller to a PC this way, with three other streams handling two-way messaging and transmission of "occasional" time-stamped data to the PC.
Bob Schor

How to use value from one data set in other data set SQL select.

Hello all, i have one data set, and i need to get value from that data set into other data set. Something like '?' but without input. I will try to explain it with screenshots:

If both tables come from the same data source, join the two tables in one data set rather than two as shown. If they are from different data sources, use a 'join data set'

Get the values from Day 1 of the Month

Hi Friends,
I have a requirement in which I have to Get the values from Day 1 of the Month.
Ex : If I enter 19 - 07 - 2007.......the report should display Values from 01 - 07 - 2007.
How to Code ?
Please provide the Code.
Thank you.

Hello ,
          Check this code,
DATA: test_datum1      LIKE sy-datum,
           test_datum2      LIKE sy-datum.
WHEN 'TEST1'.
          IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
        WHERE vnam = 'TEST2'.
        test_datum1      = loc_var_range-low.
    CONCATENATE test_datum1(6) '01' INTO test_datum2.
    CLEAR l_s_range.
    l_s_range-low   = test_datum2.
    l_s_range-high = test_datum1.
    l_s_range-sign = 'I'.
    l_s_range-opt = 'BT'.
    APPEND l_s_range TO e_t_range.
hope it helps,
assign points if useful

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.

How to capture the data within the given range of maximum and minimum values ? from csv files

My requirement,
1. Here, the user will provide the range like maximum and minimum values, based on this range, the VI should capture the data within the given range. ( from CSV file as attached )
2. Then VI should calcluate the average value for captured data and export it to excel.
This is my requirement can anyone help me on this.
Many thanks in advance
rc_cks
Attachments:
sample_short.csv ‏2439 KB

Hi,
Thanks for remnding me. I forgt to attach the VI,
Here I am attaching the VI, what I tried.
From attached CSV file, I have to find an average value for columns B,C,D,E,F,G,H,I and AJ, AK. ( data range will be defined by user ), focused only on these columns
Here, the scope is to calculate an average value for given data range by user as MAX and MIN data.
FYI: I tried manually for two instance i.e column H & I. As per H column one steady state values from 7500 to 10500 and similarly in I column 7875 to 10050. So, I gave these as a limit to capture and calculate the average value. But unfortunaltely, requirement has been modified as per below requirements.
More Info on requirement:
--> The user will define the range of data by giving some MAXIMUM and MINIMUM values(for above mentioned columns induvidually), then VI should capture that data range and it has to caculate the average value for that range of data. This is the task I have to complete.
--> I am stuck in creating a logic for data capturing for given range of MAX and MIN value from user,
Can anyone help me on this.
If my explanation is not clear, Please let me know.
Many thanks, help mw
rc
Attachments:
VI_rc.vi ‏25 KB
sample.zip ‏4166 KB

Copying the value from a cell in the SQL results?

I run an sql query. The results are returned in a results window. I would like to copy the value from this cell
and paste it into an sql query. How can I do this? I can copy and paste a value from a cell in the view of the data in
a table, but not from the test results. How do I do this? Is there a setting I need to change?

I usually do this kind of operations and I've never had any issues, the procedure is as simple as CTRL-C in the results grid, with the required column/columns selected and CTRL-V in the worksheet or anywhere else.
If you still have issues please post your
- SQLDeveloper version
- Java Version
- OS
- Database Version
and if you can a small test case.

How can I transfer my contacts, calander, to do list, notes from my Blackberry to the Macbook Pro?

Hi
How can I transfer my contacts, calander, to do list, notes from my Blackberry to the Macbook Pro?

i haven't tried anything yet. Before i downloaded the 5.0 upgrade for my IPAD, i was able to sync my IPAD with my work PC, which has everything in MS Outlook. but I can't sync my IPAD, its been a hassle since this up grade, all my apps we deleted i had reload of them. It's been a pain so I thought maybe if I could sync my blackberry with Mac then I could sync IPAD. MY goal is to have my IPAD fully functional for business.

Get value from APEX_ITEM.SELECT_LIST_FROM_QUERY - column on a report.

Hello.
Help. Help. Help.
I have to get value from APEX_ITEM.SELECT_LIST_FROM_QUERY - column on a report.
SELECT DISTINCT ROLE AS GET_ROLE,
JOB AS GET_JOB,
APEX_ITEM.SELECT_LIST_FROM_QUERY
( 1, '%', 'SELECT DISTINCT CODE c,
MODE m
FROM T2
WHERE ROLE = ' || ROLE ) AS GET_CODE
FROM T1
WHERE AGE >30 AND
SEX = 'M' ;
I was trying to use javascript :
for (var i = 0; i < selectlist_name.options.length; i++)
if (selectlist_name.options[ i ].selected)
result=selectlist_name.options;
But I don't know is that correct:
"selectlist_name" - APEX_ITEM.F01
(of my APEX_ITEM.SELECT_LIST_FROM_QUERY)?

Just as a note, but you want to make sure your APEX_ITEM call is closed. The code snippet you posted isn't complete.
APEX_ITEM.SELECT_LIST_FROM_QUERY(6,c020, 'select DISTRIBUTION_NAME, DISTRIBUTION_NAME from DISTRIBUTIONS','style="", SEQ_ID   <-- No closing )In the documentation - http://www.utoug.org/i/doc/api099.htm - (though it isn't necessarily the easiest to read) it gives this explanation of the syntax:
APEX_ITEM.SELECT_LIST_FROM_QUERY(
p_idx IN NUMBER,
p_value IN VARCHAR2 DEFAULT,
p_query IN VARCHAR2,
p_attributes IN VARCHAR2 DEFAULT,
p_show_null IN VARCHAR2 DEFAULT,
p_null_value IN VARCHAR2 DEFAULT,
p_null_text IN VARCHAR2 DEFAULT,
p_item_id IN VARCHAR2 DEFAULT,
p_item_label IN VARCHAR2 DEFAULT,
p_show_extra IN VARCHAR2 DEFAULT)
RETURN VARCHAR2;
What you want to look at is p_value to set an initial value. It should come from your data, but you could consider doing an NVL or DECODE to substitute your default.
In this case it would modify your query to be:
SELECT distinct apex_item.hidden(1, seq_id), c003,c004,c005, c006,
      APEX_ITEM.SELECT_LIST_FROM_QUERY(6,c020, 'select DISTRIBUTION_NAME, DISTRIBUTION_NAME from DISTRIBUTIONS','style=""),
      SEQ_ID
FROM APEX_collections
WHERE collection_name = 'ARGYLL_INVOICES'
order by seq_id If the value is always NULL, you can use the p_show_null, p_null_value, and p_null_text to put in a "default"
SELECT distinct apex_item.hidden(1, seq_id), c003,c004,c005, c006,
      APEX_ITEM.SELECT_LIST_FROM_QUERY(6,NVL(c020,0), 'select DISTRIBUTION_NAME, DISTRIBUTION_NAME from DISTRIBUTIONS','style="",YES, 100, 'Default'),
      SEQ_ID
FROM APEX_collections
WHERE collection_name = 'ARGYLL_INVOICES'
order by seq_id

Vaildating File name with the data in the file using sender file adapter

Hi,
Below is the scenario
1)       Pick up files from a FTP server, the file name is dynamic, how do I put dynamic name in sender file adapter?
2)       Determine if the user correctly named the file based on data in the file.
a.       File naming structure that we will be concerned with is <company_code><accounting_time_period>.<extension>
b.      The company code and the time period in the file name have to match the data in the file.
i.      For example. If the file name is 1001_200712.csv and the data in the file is for company code 1005, time period 200712, the file is incorrectly named. Both values must be correct.
How do we do this?

Hi Sachin,
                As Rightly said by Krishna, You can not put Dynamic name in sender File Adapter .You have to provide the name of the file like "*.txt" in Sender Adapter and at runtime you can access this file name by using following UDF:
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String valueOld = conf.get(key);
return (valueOld);
As now you have picked up the file name at runtime.
Now concatenate source file fields Company_code and Accounting_timeperiod using "_" as delimiter in properties.Also concat the extension .Now you have required file name.
So using EQUALS standard function ,compare it with File Name fetched at runtime using above given UDF, and pass result as you desire to process further or not or to raise Alert to resend the file.
Thanks & Regards,
Anurag Garg
You can validate this file name in Mapping itself.

Set the custom timer job that copy the data in the same list

Hi
How to set the custom timer job that copy the data in the same list
Thanks,

hello
please it is wrong to copy all of the list3 item in list1 as the example as below is a copy of one item.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Microsoft.SharePoint;
//This namespace is used for the SPJobDefinition class
using Microsoft.SharePoint.Administration;
namespace GENERAL_CustomTimerJob
//To create a custom timer job, first add a class to your SharePoint project and
//inherit from SPJobDefinition. Implement the constructors and override the Execute
//method as shown below. To install your timer job, and set the schedule, you must
//add a Feature and a Feature receiver.
class GENERAL_CustomTimerJob :
SPJobDefinition
#region Constructors
//You must implement all three constructors
public GENERAL_CustomTimerJob()
base()
public GENERAL_CustomTimerJob(string jobName,
SPService service,
SPServer server, SPJobLockType targetType)
base(jobName, service, server, targetType)
public GENERAL_CustomTimerJob(string jobName,
SPWebApplication webApplication)
base(jobName, webApplication,
null, SPJobLockType.ContentDatabase)
//Set the title of the job, which will be shown in the Central Admin UI
this.Title = "Simple Example Timer Job";
#endregion
//Override the Execute method to run code.
public override
void Execute(Guid targetInstanceId)
//Get the Web Application in which this Timer Job runs
SPWebApplication webApp =
this.Parent as
SPWebApplication;
//Get the site collection
SPSiteCollection timerSiteCollection = webApp.ContentDatabases[targetInstanceId].Sites;
//Get the Announcements list in the RootWeb of each SPSite
SPList timerJobList =
null;
foreach (SPSite site
in timerSiteCollection)
                timerJobList = site.RootWeb.Lists.TryGetList("List3");
if (timerJobList != null)
string sourceUrl = "http://aydi-pc";
string destinationUrl =
"http://aydi-pc/sites/Site1/";
string sourceList = "List3";
string destinationList =
"List1";
using (SPSite sourceSite =
new SPSite(sourceUrl))
using (SPWeb sourceWeb = sourceSite.OpenWeb())
using (SPSite destSite =
new SPSite(destinationUrl))
                                using
(SPWeb destWeb = destSite.OpenWeb())
SPList ObjSourcelist = sourceWeb.Lists.TryGetList(sourceList);
SPList ObjDestinationlist = destWeb.Lists.TryGetList(destinationList);
SPListItem newItem = ObjDestinationlist.Items.Add();
SPListItemCollection items = ObjSourcelist.Items;
                                    if
(items.Count > 0)
foreach (SPListItem item
in items)
newItem["Title"] = item["Title"];
newItem["Nom"] = item["Nom"];
newItem["Prenom"] = item["Prenom"];
newItem.Update();

I want to store the data form the PWM and the value of the changing duty cycle into a file simultaneously and continually

i want to store the data form the PWM and the value of the changing duty cycle into a file simultaneously and continually but having problem.Please can anyone help out.
Attachments:
data.vi ‏60 KB

Hello,
Have you looked at the "Write Binary File.vi" and "Read Binary File.vi" examples?
They give you a good clue as how to write and read arrays to and from binary files.
For your data it means that you could put the two data items to write in an array and write the array to file, for the read its important to in what sequence the number were written to file.
Kind regards,
André
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Using a subreport to list values from the data in the main report

Similar Messages

Maybe you are looking for