Using ALEAUD for application reply? or build a new IDOC ?

Hello.
I have a scenario where a 3rd party sends me a message, that I map in my PI to an ACC_DOCUMENT IDOC.
I need to send a reply on the ACC_DOCUMENT IDOC after processing it.
The reply must contain several applicative values from the IDOC - so that the 3rd party will be able to
"understand" on what message it receives the reply.
Should I use ALEAUD in this case? I'll have to add an extension so that it will contain the applicative values.
Or should I build a new IDOC or ABAP proxy to send the reply back? will I be able to generate it when I process the IDOC?
Anyone has a Rule of thumb on this matter?
Thanks in advance,
Imanuel Rahamim.

Hi,
If you want to give the application response with minimal effor, you might want to change the ACC_DOCUMENT IDoc used so far to calling BAPI_ACC_DOCUMENT_POST. Actually, their data structures are identical, because ACC_DOCUMENT is an ALE interface generated for this BAPI. Thanks to this, you will immediately receive application response from your ECC system, including information like document number of the document posted, and similar.
Alternatively, if you do not want to use synchronous scenario, I recommend developing a custom ABAP Proxy that you will use to pass posting information from ECC to PI to your 3rd party system. You can call this Proxy after each IDoc is posted, or on a regular basis to collect multiple postings information into a single call. I think this will be easier to do it from scratch than to enhance ALEAUD message.
Or you can go one step further and configure FIDCC2 IDoc distribution to have the financial postings automatically sent from ECC to PI to 3rd party, immediately after the posting document is created. It is up to you to decide, based on the actual requirements and possibilities of the 3rd party system.
Hope you'll find this useful,
Greg

Similar Messages

  • What is required in order to use ALEAUDIT for Idocs?

    Hi Friends
    What is required in order to use ALEAUDIT for Idocs?
    Regards
    Sam

    Hi Samuel,
    Check out this blog..
    /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
    Hope this will help.
    Let us know if you need more details.
    Nilesh

  • Problem in configuring SSO using SAML for applications hosted on diff m/c

    Hi Techies,
    I am stuck in a weird problem for past month or so without any resolution. Not much help by googling. So I hope i get the answer from the mouth of the horses -
    I am trying to use SSO using the sample application appA and appB as stated in the tutorial of SSO by BEA.
    I am summarizing the problem below -
    Steps followed for Configuring SSO using SAML
    1. Created 2 domains on 2 seperate machines namely domainA and domainB
    2. Source appliction is deployed on domainA and the target application is deployed on domaninB
    The steps mentioned in the following tutorial has been followed-
    http://dev2dev.bea.com/pub/a/2006/12/sso-with-saml.html
    3. As mentioned in the tutorial the certificate is generated using keytool utility. The same certificate is copied
    to WEBLOGIC_HOME/server/lib of destination machine.
    4. The certificate was successfully registered on desitnation or host 2 but while activating the configuration
    changes(SSL client Ientity Alias and SSL Client Identity Pass Phrase) for Federation services the following error
    is thrown -
    " SAMLBeanUpdateListener: SAMLKeyManager.prepareUpdate() failed with exception:
    weblogic.descriptor.BeanUpdateRejectedException: SAML key Manage failed to validate key (SSL Client) configuration
    in the FederationServicesMBean, key alias: testalias "
    The interesting bit of the problem is that the same configuration works on 2 domains created on same machine. The
    problem only occurs when domains are created on seperate machines.
    Alterative to the problem: when the certificate is generated seperately for domainB and copied to
    WEBLOGIC_HOME/server/lib, it works. However, the certificate generated in domainA should have been copied.
    Note: I am using Weblogic portal 9.2.1
    Any quick replies will be much appreciated. Thanks.
    Edited by saurabh.agrawal at 02/06/2008 2:01 PM

    Hi François,
    You are right about the use of the NameID format. But the issue here is/was that OIF at SP is integrated with OAM, and the authenticated user at OIF-SP and OAM will be the Anonymous user rather than the user who was identified at the IdP even though the remaining attributes sent are for the IdP user. I think these attributes can be used by with OAM for authorization using custom authorization plug-ins but haven't tried that one out.
    As for the attribute sharing profile, it's this one - http://www.oasis-open.org/committees/download.php/18058/sstc-saml-x509-authn-attrib-profile-cd-02.pdf, although for the life of me, I cannot remember why I suggested this in the first place!
    -Vinod

  • Problem grabbing image using libdc on ubuntu 12.10,build on new firewire-stack unibrain fire-i camera

    i am new to digital camera softwares.i am using unibrain fire-i camera on ubuntu 12.10 .firewire stack is new,i am using libdc1394 for grabbing images.i try to execute the example program grab-gray-image.the output image file is not giving result what i expected . i try to grab a human face image.i am adding this as an attachment. the camera parameters are as follows.
    Brightness:
    RC MC (active is: AUTO) AC (active is: AUTO)
    min: 128 max 383
    current value is: 304
    Exposure:
    RC MC (active is: AUTO) AC (active is: AUTO)
    min: 0 max 511
    current value is: 511
    Sharpness:
    RC MC (active is: MAN)
    min: 0 max 255
    current value is: 80
    White Balance:
    RC MC (active is: AUTO) AC (active is: AUTO)
    min: 0 max 255
    B/U value: 95 R/V value: 87
    Hue:
    NOT AVAILABLE
    Saturation:
    RC MC (active is: MAN)
    min: 0 max 255
    current value is: 90
    Gamma:
    RC MC (active is: MAN)
    min: 0 max 1
    current value is: 1
    Shutter:
    RC MC (active is: MAN)
    min: 0 max 7
    current value is: 6
    Gain:
    RC MC (active is: MAN)
    min: 0 max 255
    current value is: 87
    Iris:
    NOT AVAILABLE
    Focus:
    NOT AVAILABLE
    Temperature:
    NOT AVAILABLE
    Trigger:
    NOT AVAILABLE
    Trigger Delay:
    NOT AVAILABLE
    White Shading:
    NOT AVAILABLE
    Frame Rate:
    NOT AVAILABLE
    Zoom:
    NOT AVAILABLE
    Pan:
    NOT AVAILABLE
    Tilt:
    NOT AVAILABLE
    Optical Filter:
    NOT AVAILABLE
    Capture Size:
    NOT AVAILABLE
    Capture Quality:
    NOT AVAILABLE
    i am unable to identify the problem .please anyone help me.
    Thanks in advance.

    Excellent Blog. Thank You
    Small clarification on Step **6) Oracle Home Directory, ...a) Resize the Root Partition**
    Ubuntu 11.10 has Gparted available as a Ubuntu software download, DONT use that while trying the above step, instead download the ISO file from http://sourceforge.net/projects/gparted/files/gparted-live-stable/ gparted-live-0.12.0-5.iso (124.6 MB)
    Burn that ISO file on a Blank DVD, reboot the Ubuntu , during startup select Boot from DVD Option if not already selected. this will take to Boot Menu Options of Gparted Live then select the first menu option, and this allows to do further action such as Re-sizing .
    and once you have chosen and executed step a) . do NOT run step b) also that is "Setup External Storage"
    I hope this minor clarification can avoid some confusion
    Regards
    Madhusudhan Rao
    Edited by: MadhusudhanRao on Mar 24, 2012 11:30 PM

  • Lack of useful components for application developer :-(

    I want to share some remarks about our rewrite old Windows application to new AIR/flex application.
    If any Adobe staff will reading this it will be great :-)
    For colorfull web application with exotic buttons is Flex undoubtedly great choice.
    But there is many developers (and firms like us) who looking for something little different.
    We got bunch of Windows application written in Delphi. And we want (must) to move to another technology.
    AIR is superior in language, runtime, simple move-to-web, blazeDS, tools and ecosystem growth is promising.
    The only bad thing about Flex/AIR is UI. Yes, you hear right. UI is our biggest show-killer. And I am afraid that even with spark it will not be better.
    We wrote application not coloring-book.
    So we want only basic but state-of-the-art UI-standard componnets.
    ToolBar, CoolBar, Button with three states, Button with icon and auto-disabled-grayed-icon, etc..
    1) I found on the web three technique how to add icon on the spark button. Two of them include skinning. Absolutly confusing!
    2) No useful CoolBar. How long it takes make CoolBar like in Adobe Acrobat Reader or MS Word in my application? This is matters for me!
    I dont want two or three full-time developers extra for making basic components for us.
    In this point Silverlight got 100% lead. No doubt.
    http://www.componentone.com/SuperProducts/StudioSilverlight/
    http://demos.devexpress.com/AgMenuDemos/
    We still evaluate both technologies. We like Flex because is more JAVA friendly that SilverLight, but lack of usefull components will be final dead-end.
    Am so sorry.
    Know Adobe staff about this issues?
    Want Adobe application-developers or only web-developers?
    Planning Adobe making application components in the future or is satisfied with current state?

    One thing is what is technology is better for me. More jobs in the future.
    Another thing is what is better path for migrating a lot Delphi application.
    Is realy so hard to make simple, nice and usefull toolbar in Flex? I cant find anything. So maybe I must try myself :-(
    What you mean with "Microsoft can no longer execute on new technologies well"?
    My main question in previous post should be "what about lack of useful components".
    And I expected one of this answers:
    Adobe is happy with current state. Main Adobe bussines is colorful web-application.
    Adobe know there should be rich components, but now has no time. In the near future Adobe deal with it.
    I am dummy person and making great "toolbar" is easy as a piece of cake.

  • How to set Develoment Environmnet  in Linux using Tomcat for Application

    Hi All,
    I am facing problem while craeting development environment in Linux for Tomcat.
    I have installed Tomcat in /opt/tomcat directory.
    Within Tomcat i made a Application Dir name "eprosys".
    /opt/tomcat/eprosys/WEB-INF/classes
    /web.xml
    and then configure server.xml in conf directory
    <Context path="/project"
    docBase="opt/tomcat/eprosys"
    reloadable="true"
    debug="0"/>
    </Host>
    then i started tomcat
    [root@localhost bin]# ./startup.sh
    Using CATALINA_BASE: /opt/tomcat
    Using CATALINA_HOME: /opt/tomcat
    Using CATALINA_TMPDIR: /opt/tomcat/temp
    Using JRE_HOME: /usr/java/jdk1.5.0_07/
    [root@localhost bin]#
    In catalina.out message which i get.
    Aug 26, 2006 6:39:21 PM org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:8009
    Aug 26, 2006 6:39:21 PM org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/30 config=null
    Aug 26, 2006 6:39:22 PM org.apache.catalina.storeconfig.StoreLoader load
    INFO: Find registry server-registry.xml at classpath resource
    Aug 26, 2006 6:39:23 PM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 17978 ms
    [raingauge] DEBUG [Timer-0] LocationDailyGraphManagerImpl.createLocationDailyGraphs(62) | Location Daily Graph. Creating graphs at Time=Sat Aug 26 18:39:43 IST 2006
    But when i use browser like
    http://localhost:8080/project
    I get this message .
    HTTP Status 404 - /project/
    type Status report
    message /project/
    description The requested resource (/project/) is not available
    So, please help me where i am wrong. Same thing i do in Windows O/s it works.
    But in Linux i face problem,
    Bye,
    Prabhat

    aiGrace wrote:
    I want to set the options "-server -Xms128m -Xmx512m -Dcom.sun.management.jmxremote.port=8999 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Djava.rmi.server.hostname=11.40.5.62" as my java default options so that I only have to use
    java -classpath . HelloWorldUse the *nix alias command
    alias java="java -server -Xms128m -Xmx512m -Dcom.sun.management.jmxremote.port=8999 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Djava.rmi.server.hostname=11.40.5.62"

  • PC crashed, now using MAC for i-pod, won't transfer new or old music

    My PC crashed earlier this week. I can't recover my library clearly. I used my mac tonight to charge my i-pod. I also purchased some new music. Unfortunately it will not transfer to my i-pod due to the library on my now defunct PC. What can I do?
    I selected to authorize the transfer of music, but it will not transfer the music to my i-pod without erasing all of the music on there, which is NOT an option. I will NOT erase all of the music I have already paid for that is on my i-pod.
    What can be done?

    For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
    Find out how to do that here.
    How to copy iTunes purchases from an iPod or iPhone to a computer.
    For all your other music, try Senuti.
    It's a program that transfers music from iPod to iTunes on a Mac.
    As is Music Rescue.
    Both of these should work with a Windows formatted iPod because Macs can read and write to FAT32 formatted drives.
    There's also a similar program called Yamipod which has a Mac version.

  • When using Mozilla I cannot reply to or sened new emails using Hotmail, but when browsing using Internet Explorer I can, so what is going on?

    This problem only started occuring a few days ago. I have no more details to supply at the moment.

    Just to follow up on my findings. My last issue regarding the digital certificate was not at the time of initial download into Firefox, but my application required that I backup the certificate into a folder which can then be accessed to sign a submission generated by a third-party Client software.
    After finally steering away from the digital signing route by opting for a non digital filing of my project, I later revisited the Firefox certificates list only to find that the 'Backup' button still didn't work or respond in any way whatsoever; however since I only had a single certificate on my list... I threw my hand up in the air and tried the 'Backup All' button... guess what - that worked!! My browser then navigated to a file browser which allowed me to save the certificate to a folder of my choice. Of course this was after the fact as my deadline had already passed and and I had the Administrator who initially granted my secure ID revoke it once I was blocked from downloading it by Firefox.
    Just an update/FYI for y'all... But I'm not sure if this type of anomoly is due to a glitch on my computer or a glitch on the browser - but it certainly did catch me off-guard during a deadline.

  • My iphone 4s suddenly has no sound whatsoever!! i have been using this for barely a month now, brand new. what's wrong with it???? but when i use my headphones, it works fine but when i took it off, it doesnt work anymore!!! grrrrr!!!!

    Ive been using this brand new iphone 4s for barely a month now and then all of a sudden, it lost its sound! but when i use my headphones, it works. when i take it off, it doesnt! grrr... what should i do?

    Yes my Iphone has done the same thing!!! I was listning to music then it just stopped.
    There is no sound coming from it what so ever!!!! I have tried eveything, i actually work for a mobile company and i on Ipone support and i know all the tricks but nothing has worked!!! Not happy at all!! Restoring to new dose nothing, the same as when i put it in to safe mode?????????

  • Any useful tips for photoshop touch?

    Anybody have any useful tips for Adobe Photoshop Touch, it is new to me and I am not 100% with it just yet
    thanks for reply to my forum

    The build-in tutorials should be a good starting point for you.
    In addition you can watch some Video tutorials ...http://tv.adobe.com/search/?q=Photoshop+Touch&sortby=relevancy
    If you have questions, this forum is the place to ask. We already have lots of good information here. For information you don't see here, there's a community of people that can help you
    Hope that helps.
    - Guido

  • Count for item records reaches 999 the second idoc gets triggered!

    Hi Experts,
         I have an issue. Sender is file and receiver is idoc with a header and item  level records. Only one header and n number of records can be there.
    Now we want to make  this way that as soon as the count for item records reaches 999 the second idoc gets triggered.
      Hints / Solutions Pls.
    Regards,
    Arnab .

    incorporate mapping logic such that for every 999 item records create new IDoc node
    check with this UDF for IDoc node mapping, item records will be input to UDF
    int count = a.length;
    int k=999;
    result.addValue("");
    for(int i=0;i<count;i++)
          if (i>=k){
              result.addValue(""); // if records > 999, add IDoc node
              k=k+999;     
    Do rest of the mapping accordingly

  • I have used Firefox for years on my Mac laptop for years, I tried to update to version 4 and now I have no Firefox and every time I download the the Firefox the emblem has a awhite circle with a cross through it, so I can't drag it to applications.

    The support page is ridiculous, it assumes you already have Firefox and that the install went fine. I am having trouble with an update to Version 4. I have an ibook G4 running OS X. I have used Firefox for years. When I downloaded the update, the Firefox logo thing that you are supposed to drag to the Applications folder has a white circle with a line through it. I have rebooted many times and have updated all other software.

    Hello,
    I wouldn't trust any Firefox "update" from a non-Mozilla website. Sometimes, unofficial builds contain adware or malware. If you want to use Firefox for AOL do so at your own risk.

  • "No enought room on startup disk for Application Memory" when using the Accelerate Framework

    Dear colleagues,
    I am running what I know is a large problem for a scientific application (tochnog) a finite element solver that runs from the Terminal. The application tries to solve 1,320,000 simultaneous linear equations. The problem starts when I use the Accelerate Framework as the Virtual Memory size jumps from 142 G to about 576 G after the library  (LAPACK) is called to solve the system.It does not do it if I use a solver that does not calls LAPACK inside Accelerate.
    The machine is a mac pro desktop with 8 GB of ram, the 2.66 GHz Quad-core Intel and the standard 640 GB hard drive. The system tells me that I have 487 GB available on hard drive.
    The top instruction in Terminal reads VM 129G vsize when starting. When I run the finite element application once the LAPACK library in the Accelerate framework gets called, the Virtual Memory (VM) jumps to 563 G vsize.
    After a short while, I get the "No enought room on startup disk for Application Memory error"
    This is a screen capture of the application attempting to solve the problem using the LAPACK library inside the Accelerate framework: Here are the numbers as reported by the activity Monitor.
    Tochnog Real Memory 6.68 GB
    System Memory  Free: 33.8 MB, Wired 378.8 MB, Active 5.06 GB, Inactive 2.53 GB, Used 7.96 GB.
    VM size 567.52 GB, Page ins 270.8 MB, Page outs 108.2 MB, Swap used 505 MB
    This is a screen copy of the same application solving the same problemwithout using the Accelerate framework.
    Tochnog Real Memory 1.96 GB,
    System Memory  Free: 4.52 MB, Wired 382.1 MB, Active 2.69 GB, Inactive 416.2 GB, Used 3.47 GB.
    VM size 148.60 GB, Page ins 288.8 MB, Page outs 108.2 MB, Swap used 2.5 MB
    I can not understand the disparity in the behavior for the same case. As I said before, the only difference is the use of Accelerate in the first case. Also, as you can see, I thought that 8 GB of ram memory was a lot.
    Your help will be greatly appreciated
    Best regards,
    F Lorenzo

    The OP had posted this question in the iMac Intel forum.
    I replied along similar lines, but suggested he repost this in the SL forum where I know there are usually several people who have a far better grasp of these issues than I.
    I would be interested in getting their take on this.
    Although, I think you are coming to the correct conclusion that there are not enough resources available for this process, I'm not certain that what you are saying on the way to that conclusion is correct. My understanding of VM is that it is the total theoretical demand on memory a process might make. It is not necessarily the actual or real world demand being made.
    As such, this process is not actually demanding 568GB (rounded.) As evidence of that, you can see there is still memory available, albeit quite small, in the form of free memory of 33.8MB and inactive of 2.53GB (the GB for that figure, above, seems like it might be a typo, since for the process when not using Accelerate the reported figure for inactive was 416.2 GB -- surely impossible) and 7.96GB used. The process, itself, is using 6.68GB real memory.
    In addition, I question whether the OP has misstated the 487GB free drive space. I think that might be the total drive capacity, not the free space.
    My guess is that it is the combination of low available memory and low free drive space prompting this error.
    From Dr. Smoke on VM:
    it is possible that swap files could grow to the point where all free space on your disk is consumed by them. This can happen if you are very low on both RAM and free disk space.
    https://discussions.apple.com/message/2232469?messageID=2232469&#2232469
    This gets more to the actual intent of your question...
    EDIT: Looks like some kind of glitch right now getting to the Dr. Smoke post.
    Message was edited by: WZZZ
    <Hyperlink Edited by Host>

  • Access Point  not visible in UMS server for Application using UMS adapter

    Email Driver Properties for email is configured in UMS and works fine which means its able to poll for any incoming Email from the Configured Account.
    Now i am builiding a soa Composite application and and using UMS adapter to receive that incoming mail and process it further.
    I have succesfully deployed that application in my soa server but it doesn't show any access point for that application.
    I have followed oracle Documentation (section 11.2.3.3)
    http://docs.oracle.com/cd/E28280_01/integration.1111/e10231/ums_adapter.htm
    how to get that Access point configured for application ?
    Please Help.
    Thanks in Advance
    Divyanshu

    Thanks for the reply.
    I had readded the access points after phone reset, so they are available under internet destination but none of the apps are able to see them.
    I also saw 3-4 processes listed under panic tab in KillMe application, not sure if being inside panic tab means that the processes crashed, i hope it's not a hardware related problem.

  • Using AIR for all application.

    Hi to all!
    In this days i'm trying to use Adobe AIR with FLEX to build
    RIA on Desktop and other application (like company managment and
    other:) In past i used VB .NET, C++, C#, and JAVA. I know that this
    are the language for "antonomasia" to build company managment
    software, but for you, what is the negative aspect to use AIR in
    Desktop application? For example:
    - Performane? (Database handling is not optimal, or other
    issue....)
    - Using AIR interpreters means up RAM and CPU usage, or
    others?
    - Other..
    Thanks boys!

    Its possible but you would need to tell each movieclip and audioclip to play/pause. You can create a for loop inside your mouse event function to find each movieclip and pause/play its timeline and a separate for loop for audio clips. Also instead of setting fame rate to 0 for pause just use a stop() command.

Maybe you are looking for