Using an iDVD project to create a glass master for replicati

Hello, I hope someone can help me with this question.
I am aware that creating a project in DVD studio pro and exporting it to DLT is one way to go for a media source that can be used by a replication company to create a glass master for replication. I am curious to know if I could send a disk I created in iDVD to a replication company for creation of a glass master?
Given that a disk created iDVD is acceptable for this purpose, are there any disadvantages to this compared to the DLT method? Is compression quality inferior? Are the menus created in iDVD more prone to problems?
Thanks in advance for your help.

Thx for your answer, i use Labview 8.6 to interact with the API, So i don't know if I interpreted rightly your code...
I've managed to create an empty project file (.tpj) with "Engine.NewPropertyObjectFile (6)"
With the "rootworkspaceObject.NewFile(filePath),0" A pop-up appear to select the file (so it must be created before like above).
What i've done is:
- Creating the file as a project file "Engine.NewPropertyObjectFile (6),(Path)."
- I write the new file to disk "PropertyObjectFile.WriteFile(format)" and "PropertyObjectFile.SaveIfModified"
- Then i try to associate The existing .TPJ file to the RootWorkspaceObject "WorkspaceObject.NewFile(Path)" and "WorkspaceObject.InsertObject(Index)"
-At last I save modification of the association "WorkspaceFile.SaveWorkspaceAndProjectFiles(option)"
There is no error and when i open the workspace in teststand, there is no .pjt in the workspace tree...What i'm missing...
So this does not work for me..
Cheers
Martin

Similar Messages

Using Apache Commons HTTPClient to create a custom socket for Java mail

Does anyone know how to use Apache Commons HTTPClient to create a custom socket for Java mail. This is necessary for me to use NTLM authentication

JavaMail doesn't use HTTP.
If you want to add support for NTLM authentication to one of the standard protocols,
your best bet is to create a SASL provider, although note that only JavaMail's IMAP
provider uses SASL currently. The other protocols should add SASL support, but that
hasn't been done yet.

Create 1 customer master for some small customer

Hi All,
Our company have some small customer, sometime they buy our goods (may be they buy only one time). So we want create 1 customer master for them. Can we do it?

Dear ngocvt,
Transaction Code: V-07 - Create a one-time customer. (Account Group - CPDA)
One time customer / vendor accounts in SAP means they are account groups for customer/vendor and where in only the general data of the customer / vendor are stored instead of maintaining the bank data and other company code data that are relevant for other account groups which are useful for long run purposes.
As you know everything that is entered in SAP is saved in some TABLE. Now the customer & vendor master is such a table which holds vast amount of data.
The business secenario where the vendor or customer which are being in system only for 1 transaction, it is not advisable to have all the data maintained in main master.
Therefore SAP has provided with the feature of One time vendor / customer wherein in the document entry stage only you have to enter the name, address and other details of the vendor/customer.
The data, as far as I know' remains at doc level and does'nt go to the master tables.
If you want to change the standard functionality then go to
Transaction OBD2, u will find CPDA, that is standard one one time customer account group.
Copy it and make necessary changes.
Hope this Helps.
Thanks
Murtuza

Edit in iMovie using archived iDVD project?

Well it looks like I may done something rather stupid. Before the holidays I produced a family vacation video, burned the DVDs and sent them out to all my family members. After watching it they pointed out some typos in some captions and some editing mistakes, so I wanted to go back and fix those and burn new DVDs. But I just realized I'd archived the iDVD project but not the iMovie project. I trashed the iMovie project to recover disk space. So now I'm left with just the iDVD archive.
Is there any way to recover my iMovie project from the iDVD archive?
(I can't believe I trashed my iMovie files. That just isn't like me at all. <shame>, <embarrassment>, <lesson learned>)
iMovie HD
iDVD 6
- Lofty

You can recover the movie from the archived DVD project but the movie may be in several sections/clips. Just Control-click on the archived iDVD project file and select "Show Package Contents" from the contextula menu. Then go to the Resources/MPEG.nobackup folder.The sections/clips should be in there.
You can import those clipes into iMovie but won't be able to edit the captions, only cut them out and put new captions in over new clips. If you added captions to a black background and not over the movie itself you could cut out those sections and add new sections. But if you have to cut out parts of the movie with captions to add new ones that could lose a good bit of the original movie. In that case I thiink going with the typos would be the better solution.
When you're done use the Share ➙ Media Browser menu option with Size = Large. This will give a better final image than Share ➙ iDVD will. You will have to delete the existing movie file from the iDVD project and add the new, editied movie.
OT

Check memory used in iDVD project

I am putting about 3 iMovies in 1 DVD project. I want to know what amount of memory I have used and what is left in the DVD. How can I do that?

I want to know what amount of memory I have used and what is left in the DVD. How can I do that?
Open the Customize side panel, click the Status tab. The DVD Capacity shows your project size/usage.

Using APT ActiveX methods to create a labview program for BPC 203 3 channel Benchtop Piezo controller

Hi Everyone,
I am really very new to Labview and i am in great need for some help.I am assigned a task where i am supposed to create a labview program to control or moniter a BPC203 3 channel benchtop Piezo controller. I created a program with the help of the instructions provided in the APT-Labview guide provided by Thorlabs.But th program doesnt run . Whenever i try to run it i get the same error which says that "Control HW Communications disabled".I have attached a snapshot of the error message.So i tried to create a small program in labview which would read the volage output.Even there i got the same error message.I suppose there is some mistake on my part which i am not able to correct due to the lack of proper knowledge.Could anyone please help me to solve this problem.A slight elaboration would be highly appreciated.Also i think the error lies in the use of invoke node with the get Voltage output method. I am not sure whether the parameters i have provided to the invoke node are correct.Any help of any sort would be highly appreciated.
Attachments:
Front Panel with error message.PNG ‏202 KB
Block diagram.PNG ‏101 KB

Hi
I had the same problem today. However, I noticed that the piezo controller has 3 channels with separate slots and they are packaged in the same box. Therefore the whole box has a serial number, probably something like 71822280, and this is written with large letter. Now, in order to communicate with any of the channels, this does not help, but one needs to communicate directly with the interested channel and they have thier OWN SERIAL NUMBERS.
For example channel 1 (my X direction in the nanoMax stage) has serial 91822281, Y has 91822282 and Z has 91822283. So try looking if you have the right serial number Hopefully you found out this yourself but this might help others, I took me3 hours to get this thing working when I started to plug-in the cables and everything.
Lasse

Report Painter using user exit U002 to create a formel variable for FI-SL

Hi,
I would like to use Report painter creating a formel variable with U002(VAR1,VAR2) for FI-SL and did following:
1. go to TCode: GS11
2. Formel: selecting U002 from Formel-Exit list and giving var1 and var2
      '#U002(VAR1, VAR2)'
3. Save
4. Erro message: U002 is not definiert.
Why???
U002 is already implementiert in
Class ZCL_IM_FI_FORMULA_EXIT
method IF_EX_G_SET_FORMULA_EXIT~EVALUATE
CASE flt_val.
    WHEN 'U002'
Could anyone help me? Thanks!
Klara Zhao

dollyb wrote:
if enter 05.2008
the volume should look like below as a vairable range.
sales volume
01.2008 - 05.2008
you want 01.2008 - 05.2008 as description , thats what your requirement right?
When 'ZTEXT2'.
DATA: ZYEAR(4)   TYPE C,
ZTEMP1(6) TYPE C,
ZLOW(14) TYPE C.
if i_step = 2.
CLEAR L_S_RANGE.
Loop at i_t_var_range into intern_range where VNAM = 'user entered variable for calmonth'.
*lets say user entered 05.2008
ZTEMP1 = INTERN_RANGE-LOW.
* now ZTEMP1 has 05.2008
ZYEAR = ZTEMP1+0(4)
* zyear = 2008
*A SLIGHT MODIFICATION TO CONCATENATION
CONCATENATE '01' ' .' ZYEAR '-' ZTEMP1 INTO ZLOW.
*SO 01. 2008 -05.2008 WILL BEN IN ZLOW
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
L_S_RANGE-LOW = ZLOW.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP
ENDIF.
use the text variable as description then u will get the required result i.e &ztext2&
HERE I DIDN'T written any L_S_RAnGE-HIGH.
Regards,
Ranganath
Edited by: Ranganath on Nov 9, 2011 9:41 AM

Use Palm Pre Profile or Create New HP Profile for Touchpad?

I have a Pre+ and using my original Palm Profile for backups, etc. When my Touchpad arrives, should I use my original Pre Profile or create a separate HP Profile?
What are the advantages and disadvantages of using the same profile for both devices?
Post relates to: HP TouchPad (WiFi)

ivanetter wrote:
I have the Palm Pre2 and the HP Touchpad. I set up the touchpad first, created the webOS account using yahoo mail address. When I received my Palm Pre2, I created the palm profile using the same email address.
The first connect of the two, a few apps that I installed on my touchpad synced onto my palm. Now, I cannot get this to happen again.
Also, on my Palm Pre 2, the phone came with a palm profile already on it...Dr. Skipped Firstuse...how do I delete this and where did it come from?
Unless I am mistaken, the sync of apps between the devices only happens one time: when the device is first brought online and into the webOS Account.
Not sure what you mean by Dr. Skipped Firstuse. Could you give us a screenshot? To take a screenie press at the same time: Orange (may be White on your phone), Sym and P keys.

Where is anla-xafabch ( Asset acquired used ) field filled when you create an asset master record?

I'm trying to figure out when is informed the field xafabch , but it doesn't appear in data master (AS01, AS02) and it's not available in data master structure in customizing.

Hi Daniel,
the field comes together with supplier within origin.
Kind Regards,
Steffen

Creating a QT Master for a Digital cinema Screening.

Hello,
I'm preparing a film for a Digital Cinema release. We shot it DVCPRO HD 1920x1080 25fps progressive and we are delivering a TIFF video file with the same specs. They will then be upresing that to a 1998 x 1020 DCP file.
My concern is that the titles when blown up will look crappy, as I've had his problem before with titles done in FCP. I'm going to do them in Live type but I'm unsure about the correct settings for render.
Also what should I render out for the finished film?
those are my specific questions but I'd be really interested in any other advice from people who've done this before.
Thanks very much
Fred

Fred:
Based on the resolutions that you've indicated, I think you have nothing to worry about; however, you might try to do a test conversion - between one to five minutes - prior to doing your full film.
There is a little something to worry about when you consider that your DVCProHD 1080 (i50?) master has a native frame size of 1440x1080 with a display frame size of 1920x1080.
While it may seem that you are only changing from 1920 to 1998 (an increase in the width to 104.1%), you are really changing from 1440 to 1998 (an increase of 133.3%). The change to the height from 1080 to 1020 is minimal (a decreases in the height to 94.4%).
Most any professional scaling method should yield good results; but you could see degredation in the image quality (picture and/or graphics) due to the change in width.
Going to TIFF to the final DCP (which should use JPEG2000), you should see no degredation in image quality due to changes in spatial compression and/or temporal compression as both compression methods support "lossless" compression settings.
If your DVCProHD source is interlaced, you may to deinterlace it before a change is made to the image size to avoid any combing (thin horizontal lines in the picture) in areas of high motion.
Yeah, I'd say do a short test conversion first.
-Warren

IDVD Project Locked. wont let me open.

I recently wiped my partition and reinstalled all my apps.
And when I reloaded the OS I used a different name.
However when I try to open a certain iDVD project I get this message
"The project Bday Pool Party Sleepover 2009
is locked by the user xxxxxx (user ID 501):
2009-08-26 16:48:09 -0400.
The project can't be opened at this time".
However Im able to open other iDVD projects I created under
the same previous user name but not this one.
And this is my home computer and no one else has access to it.
And I never locked or password protected it in iDVD if thats even possible.
Any suggestions would greatly be appreciated.

To quote Rich839:
I would start with deleting preferences and doing a permissions repair. To delete preferences, close iMovie and trash the file named com.apple.iDVD.plist found in User(the house icon)/Library/Preferences. iDVD will replace that file on relaunch. To do a permissions repair, open Disk Utility found in Applications/Utilities. Select your hard drive icon displayed at the top of the left hand pane, and then click on the Repair Permissions button. Wait a few minutes while permissions are repaired, and when finished, launch iDVD and see if you still have the problem.
Last suggestion: Try adding a new user account with the authors name of the original iDvd project file.
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

How do I deleted a movie from an iDVD project

I created an iDVD project using a movie, and have decided to go back into iMovie and make changes to the movie I am using for this project. Since I have put so much time into putting photos and music in submenus, I want to use the same project I created, just replace the old movie with the new. I cannot figure out how to delete the old movie from the project. I have shared the new one thru Media Browser, and it is ready to be added, but I first need to delete the prior version from the iDVD project.
Anyone know how to do this? Thanks.

READ THE ENTIRE MESSAGE BEFORE DELETING ANYTHING !!!
To delete a movie from iDVD: Open iDVD. Click once on the movie title to highlight it. Hit Delete. It should disappear in a poof of smoke.
If you have chapters in your movie, you need to delete the Scene Selection text button also.
But, when you reopen iDVD after changing your movie, before doing anything in iDVD, iDVD should give you a message that your 'assets have changed' and ask if you want iDVD to update. Click on yes/ok, but check your iDVD project before burning. The way it is supposed to work is that iDVD recognizes that you have made changes to your iMovie, uses the revised iMovie in its files instead of the first one, and uses the updated iMovie when you burn to disk or create a disk image. It is a nice feature so that you do not have to delete the iMovie already in iDVD and have to put in your updated newer version; iDVD is supposed to add the update itself, using the newer version of iMovie. It worked that way in iDVD 6.
However, if you have an iMovie with chapters, what happens with iDVD 8/9, as opposed to iDVD 6, is that iDVD does indeed recognize the changes and sends the 'do you want to update' message, but if you tell iDVD to go ahead and update, the chapters will no longer select correctly. They all will default to the same chapter no matter which one is selected.
I can't tell you whether or not iDVD will correctly play the updated movie if you don't have chapters. You will just have to try it.
If you do have chapters and/or incorporating the changes in iMovie does not work, the only 'fix' is to recreate the iDVD project. It takes time but is not difficult since you have done it once. Open a new iDVD project and put the updated iMovie into it. Do a "Save as Disk Image" to create a disk image file of your iDVD project. Play the disk image file with DVD Player. If it plays correctly, burn your disks from the disk image file using Disk Utility or Toast. You can delete the old iDVD project.
Good luck with it!

Broken Link to iDVD Project File

I created an DVD from iMovie just fine.
However, when I try to use the iDVD Project file, it cannot find the shared file. This means I have to redo the iDVD opening screens whenever I make changes in iMovie, and want an updated DVD with the latest changes.
I have moved both the iMovie file & the iDVD Project File to my external firewire drive. Both open fine, but won't link.

Thanks, good advice. I'm up to date on OSX and iLife 05.
My iBook only has 40G free, so I'm creating & storing my imovies on the external HD. What if I create iDVD project from the external drive and leave it there? Will it link, or does it have to be on the startup (internal) HD?

Can't burn new DVD on older iDVD project

I made an iDVD project with all our summer pics for the kids, and burned DVDs for them. I got the pics from folders I'd made in iPhoto. Now I'm trying to burn another DVD and get the following message: Errors in Project. There were errors during the project validation. These errors have to be fixed before burning the project."
I have no idea what the errors are - the only thing I've done since burning the original DVDs is delete the old folders in iPhoto. The pictures are all still in the library.
Please help & thanks - J

Does this mean that I have to somehow "save" or "lock" the folders that I've used to create an iDVD project?
Just don't change any names or paths to images used in your active iDVD projects if you expect to reedit/reuse them.
Once you have finished a iDVD project, save the encoded project as a disk image file. The disk image file is not dependent on the orignal source content file name/location. This will enable you to burn additional copies to writable media in the future. You can NOT reedit a disk image file without using something like DVDxDV to convert the mpg-2 content to something that can be reused by iDVD in a new project.
If you have LOTS of external hard disk space, you can save your completed iDVD project as an iDVD Project Archive file. This will contain all the source material needed to reedit the project and as a result may be very large!

Authentication using CSOM with Project Online

How are we to connect to Project Online with CSOM? All the SDK articles do not include any type of authentication. So if we are trying to use the CSOM to list out projects, and I try to create a credentials object and pass that to the ProjectContext.Credentials,
how would this work with the Project Online solution?
If I try to use the standard network credentials, I get "(403) Forbidden" when I pass in my onmicrosoft.com account and password for credentials. I am the admin on my instance.
So a little help on understanding how to connect remotely to Project Online via CSOM would be great.
Here is a sample PowerShell script I am using. Same result in C# too:
Add-Type -Path 'C:\Sync\Microsoft EPM\Scripts\Microsoft.ProjectServer.Client.dll'
$credentials = Get-Credential "[email protected]"
$pwaPath = "https://bossnunyatest.sharepoint.com/sites/pwa"
$projContext = New-Object Microsoft.ProjectServer.Client.ProjectContext($pwapath)
$projContext.Credentials = $credentials
$projContext.Load($projContext.Projects)
$projContext.ExecuteQuery()
#Receive (403): Forbidden although I am admin
#This works fine against OnPrem
$projContext.Projects|select Id,Name
Thanks,
Kirk

Project Online is a part of SharePoint. Programmatically accessing Project Online uses the procedures that are described in the Office and SharePoint app development SDK; see
Build apps for SharePoint. PowerShell can be used to administer Project Server 2013 (Windows
PowerShell cmdlets for Project Server 2013); I don't know of a way that PowerShell could be used with the CSOM for Project Online.
App development with the CSOM requires Visual Studio 2012 with the Office and SharePoint tools and other client components installed. See
How to: Set up an environment for developing apps for SharePoint on Office 365. The simplest way to start is to create a SharePoint-hosted app; the other app types require using
OAuth. The procedures for Project Online are essentially the same as described in How to: Create a basic SharePoint-hosted app, except you'd provide the URL of your PWA site
instead of the URL for SharePoint, and instead of the SP.ClientContext, you use
$(document).ready(function () {
var projContext = PS.ProjectContext.get_current();
var pwaWeb = projContext.get_web();
... and in the Default.aspx page, set a reference to PS.js, e.g.
<script type="text/javascript" src="/_layouts/15/ps.debug.js"></script>
Jim Corbin [MSFT]

Using an iDVD project to create a glass master for replicati

Similar Messages

Maybe you are looking for