Using both, LabVIEW 32-bit and 64-bit

Hi Guys,
I have a requirement where I have to interface with a camera using LabVIEW 64-bit (because the dll provided is for 64-bit system). At the same time, I have to communicate with several variables via OPC Server using LabVIEW DSC, which is only available in 32-bit. I was told that I cannot run one same program but utilizing LabVIEW 32 and 64 bit simultaneously. Hence, I would like some advice, especially on the architecture, on how should I approach this.
Advices are much appreciated.
Shazlan

Are you sure that you can't have a 32-bit compatible dll for your camera? It would really make your life easier.
Also if you only use the DSC module for the OPC function, maybe you could look for a different set of OPC functions that support 64-bit.
In the end if you really have not choice but to use DSC module and use the 64-bit dll for the camera, you will need to apps, one in LV32 and one in LV64 and you will have to decide which one is the main one and find a way to communicate between them, TCP comes to mind, also VIServer, I have never tried VIServer between a LV32 app and a LV64 app but my bet is that it should work seamlessly.
Good luck!
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Similar Messages

  • Good Morning.  I'm having a problem using both my Photoshop elements and premiere programs.  I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in.  I am able to open up the organizer without problems,

    Good Morning.  I'm having a problem using both my Photoshop elements and premiere programs.  I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in.  I am able to open up the organizer without problems, but when I try to open up the photo editor (either by trying to open up the program from the main menu, or right-clicking on a photo in the organizer to edit in elements), the program asks me to sign in to adobe (which I can do and it doesn't give an an "incorrect password" or log-in ID error) then accept the terms and conditions.  When I click to accept the terms and conditions, nothing happens and the editor fails to open.  Everytime I click on the program, I get this same "loop" of signing in and accepting T&C's, but the program fails to open.  Any advice?

      Premiere Elements 10 is now 64 bit, but not PSE10.
    Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
    Click image to enlarge
    Turn off face recognition and the auto-analyzer to improve performance.
    When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed.

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me!

    I recently moved and I got a new sim but I still use my old sim. I want to use both numbers for iMessage and FaceTime but i have absolutely no idea how to do it! please help me! I have a macbook pro and iphone 5

    lewbobber wrote:
    Basically i need to either take it to a shop that can unlock i.e. £40.00
    Be aware, you go that route & every time you try to update or restore, it will error out, leaving your phone unusable. Not to mention, you void all warranty/support.
    Sell it & use the proceeds towards an officially unlocked iPhone bought directly from Apple.
    Good luck.

  • Can you use both an employee discount and a military discount on one account?

    Can you use both an employee discount and a military discount on one account?

    No.
    You can only have one ELEU (Employee Corporate Discount) on an account
    So choose the one that has the greater percentage which is probably the military.

  • Using both at line-selection and at user-command

    hellow friends ,
    to use both  at line-selection and at user-command in the same report.

    Hello,
    U can do it like this.
    AT LINE-SELECTION.
      PERFORM at_line_selection.
    AT USER-COMMAND.
      PERFORM at_user_command.
    FORM AT_LINE_SELECTION.
      DATA: LV_CURSOR_FIELD(30).
      DATA: LV_MATNR TYPE MATNR.
      CLEAR H_UCOMM.
      GET CURSOR FIELD LV_CURSOR_FIELD.
      CASE LV_CURSOR_FIELD.
        WHEN 'PSPNR'.
          PERFORM LAGER_AN_PSP USING WA_MATNR-M1-RSNUM
                                     WA_MATNR-M1-RSPOS.
        WHEN 'PSPNR2'.
          H_UCOMM = 'PSPNR2'.
          IF NOT PSPNR2 IS INITIAL AND IT_VKBEL-VBELN CN '0123456789'.
            PERFORM LAGER_AN_PSP_VKBEL USING IT_VKBEL
                                             0
                                             PSPNR2
                                             H_MAKTX
                                             ' '.     "keine Blindbuchung
          ENDIF.
    ENDCASE.
    CASE SY-UCOMM.
        WHEN 'BACK_NEW'.
          PERFORM NEU_START USING 'X'.
        WHEN 'EXIT'.
          PERFORM NEU_START USING 'X'.
        WHEN 'CANC'.
          PERFORM NEU_START USING 'X'.
        WHEN 'CHECK'.
          PERFORM NEU_START USING SPACE.
    ENDCASE.
    Vasanth

  • I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files.  I then installed a purchased product from Adobe disc using the serial number on the case.  But when I

    I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files.  I then installed a purchased product from Adobe disc using the serial number on the case.  But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial.  It asks for the serial number and says that my trial has expired.  It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product".  It thinks that I still have the expired Trial Version installed.  How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????

    Let me know how it goes. Go into your Adobe account and register your serial number asap.
    https://www.adobe.com/account/my-products-services.html
    That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
    There are too may sad stories here, where people forgot and the box is buried or lost.
    Gene

  • Various problems when trying to use both my iPhone 4 and iPhone 5 at the same time? HELP!

    I am experiencing a wide range of problems with both of my iPhones. They are both a 4 and a 5. I will list the problems I am having.
    Using both phones:
    A few weeks ago I recieved a new phone, the iPhone 5 as my contract was renewed. I backed-up my old phone, the iPhone 4 to my computer and restored it onto my 5. But when using my 5, I discovered it has 'no service' (but will use wifi), it won't send IMs OR texts and Apple constantly keeps asking me for my Apple ID which i recently changed but still uses the old email, and won't accept any passwords.
    The 5 used to send IMs and texts but they would be sent to my friends through my email address, so I googled this and went to messages>send and recieve, and the only thing i can select is my email, not my number. I am using the 4 as well, purely so I can send texts and IMs through my name, not my email. The 4 also has signal and wifi, whereas the 5 only has wifi. I am wondering if the 5 has no signal and won't send IMs & texts because I am still using another phone? Surely they both cannot work together, so I was thinking I could reset my iPhone 4, and then see if the iPhone 5 will work, once the second phone isn't used anymore. If that doesn't work, I thought I could reset my 4, back-up my 5 and then restore again. I think that will work, but I have no idea.
    I have absolutely had it with trying to figure it out, I have used google but nothing seems to work. I am really hoping someone can tell me what to do with all my phone problems, because they are absolutely driving me mad!!!!!!!!!!!!!!!!!!! 
    I need to use the 5, it is costing me an extra £60 a month to use and I feel as though that money is being wasted as I can't text, IM or call people. Should i just get rid of the 4 and see what happens? I read online that to stop iMessages coming through as your email, you should turn it off and use regular texts. BUT I DO NOT WANT TO DO THIS. I send way too many texts, and it would cost a fortune. I also can't send photo messages on texts, because they cost a bomb to send through. I want to be able to use both texts and iMessages - using my name, not my email. 
    To add on to that huge essay I have written, on both phones Apple CONSTANTLY asks me for my Apple ID which I recently changed. I changed the email and the password, and it is coming up with the wrong email, and whatever password I put in, it still says it is wrong. It doesn't make sense, because yesterday I purchased some music from iTunes and when asked for my Apple ID, it used the right email and accepted the correct password. ...??? yet it still keeps getting it wrong, even though it worked in iTunes. ??!?
    Okay so I just reset my iPhone 4, and nothing seems to have changed...I thought if I reset it, it would be completely wiped, like a brand new iPhone 4, but it's not....THIS IS SO IRRITATING! Can someone please help me! I GREATLY appreciate any answers, hopefully someone on the internet can fix my problem! thank you for taking the time to read this essay, I am very thankful. PS. Both phones are up to date.

    You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.

  • How do I use both a GUI switch and a timer to control an output?

    Hi, I have no trouble setting up either a gui switch or a timer to switch a hardware output. However, now I am trying to use both to control the same output. That is, the latest change of either the timer or gui switch changes the output. I can do this by setting the gui switch output and the timer output into a software latch and connecting the latch to the hardware. The problem is that now the gui switch does not reflect the state of the hardware output (if the timer changed the state). One solution I can see is that there is both a push button 'change state' as well as an indicator at the gui but I would rather have all the functionality in the 1 switch. Any suggestions welcome!

    It looks like you should be using a flip-flop object. This object changes state each time your input transitions from false to true. Also you would probably be better off using a push button rather tham a switch.
    You can tie "your timer OR your pushbutton" to the input of your flip-flop. Then if you display the flip-flop on top of the push button you can easily see which state you are in. Then of course just tie your flip-flop to your output.
    **This will work fine as long as you are NOT running multiple client applications. If you are running multiple clients, then it has to be done completely different. If this is the case please let me know and I will explain.
    Hope this helps

  • How to use both At USER-COMMAND and AT LINE-SELECTION in one abap program

    I am trying out a program where I need to use both line selection and user command events in one program. Suggest me how to do it.

    USE the okcode 'PICK'. (I mean add a 'PICK' in the GUI staus or the menu.) When ever u use both the events u have to use PICK to trigger the at line selection.
    U just need to add the PICK in the GUI status and ofcourse write code in the program.
    AT LINE-SELECTION.
    CASE sy-ucomm.
    WHEN 'PICK'.
    write:/ 'HELLO WORLD'.
    ENDCASE.

  • Using both power saving mode and offline mode caus...

    So I am having a very strange problem. I have been using the Situations App (formerly Nokia Situations) to automatically put my phone into offline mode, and power saving mode over night. 9pm to 6:30am.
    Recently the phone as started refusing to leave the offline mode in the morning. Even if I try to change the profile manually it says "Unable to change profile". The only way I can get out of offline mode is to reboot.
    I uninstalled Situations, and manually put the phone into offline mode and power saving mode. By the morning I had the same issue, stuck in offline mode until reboot. So it's not the App causing the problem. I've tried a soft reset, same problem still.
    I also noticed that over-night (from fully charged before 9pm) to 6:30am I used about 70% of my charge. (A combination of power saving mode and offline mode is killing my battery!)
    I would have to go to work and immediately put my phone on charge! I.e.. 12 hours of offline + power save has drained my battery almost completely.
    Last night I decided to use the Situations App to put the phone into offline mode, BUT NOT activate power save mode.
    This morning the phone had virtually full charge and it had no problem returning to online mode. So it's ONLY if I use BOTH power-save and offline. (Tonight I will try using power-saving mode and NOT offline mode to see if it's only the power-saving mode causing the issue!)
    If I manually enter offline+power-save mode, and then try to return to on-line/non-power-save mode, relatively quickly, i.e.. Not over-night, everything is fine. It's only over night the problems start!
    Any help?
    Rob
    PS. I also have the problem where using HSPA+ causes my phone to drop from the network and stop being able to receive/make phone calls. But disabling HSPA+ works around this for now, I think this problem is unrelated however.

    I have a similar problem. My 808 PureView loses 70% of its charge overnight if I leave it in normal profile without power-saving. To deal with this issue, I started using the situations app to put the phone in power saving mode overnight. That solved the problem (although I never put my phone to offline mode). This is a weird problem because throughout the day my phone doesn't use 70% of charge, but it does overnight while doing nothing!
    I have also experienced the second problem, losing cellular and internet connection, on my 808. I have started a thread to deal with this issue.
    http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Nokia-808-PureView-loses-cellular-an...
    I believe it is a firmware bug that causes this problem.

  • Can i have my photoshop license to used both on my imac and my mac book air?

    I'd like to know if it is possible to use one photoshop license both on a imac and on a laptop.

    Yes.

  • Using both 837 P multiple and 837 P single schema

    I have one application which is using 837P Muliple achema........Now i have another application which needs to use 837P single schema....
    but how to use 837P Single schema......As both have same namespace and root node..........so i cant use schema from that application also and i cant deploy my schema also....Is there any solution for this situation.....

    Can you elaborate on what you mean by "Multiple schema" vs "Single schema"... it seems like the single schema could be satisfied by the multiple schema (assuming a difference between repeating vs non-repeating structure(s)).
    Assuming you need to deploy both schemas several options are available.
    If the documents are received on different transport URIs, you can dedicate a different BizTalk application for each schema type.
    If the documents are received on different transport URIs, you can change the namespace of one of the schemas.
    If the documents are received on the same transport URIs, you may run into issues disassembling the messages, as the disassembler (EDI or flat file) may match to the wrong schema during the Probe() method call.  This option will require more discussion
    to determine what you may need to do.
    David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

  • Can I use BOTH Verizon DSL Wireless AND DISHnet Wireless at the same time?

    Waiting for Dishnet contract to die and rot away but about 2 months to go.  Want to get with Verison Standard DSL Wireless as no data cap tho slower.
    I can just wait till Dishnet dies and keep bumping into data caps with the Dish service OR can I get the DSL setup and use one connex for the iMac and one for the iPad without any conflicts?
    I am so ignorant of technology that I see a Swing-a-Way hand crank can opener as a marvel of industrial magic,....so please talk simple words to me, :-) 
    Thanks
    DH

    Sign up for the fastest DSL package that you can. Even if the overall speed is slower, the fact that you won't be going over a satellite connection anymore should make the Internet *that* much faster. The Wireless Gateway should come included.
    You can use both services at once, although note that determining how you plan to use both at the same time is going to be another story. Some people use Dual WAN routers (as in, routers that accept two Internet connections and can balance between the two). Others will use the connections separately, by moving devices between the two connections as needed.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • How to use both a PowerMac G5 and a remote PowerBook G4?

    I just finished installing my new 2.3DC G5 and migrating my info from my Powerbook. I also set up a wireless network with Airport Express. Everything has been running smoothly and without any problems. So far I am extremely pleased with my new system. I have all my emails, files and everything on the new G5, and I am working from this machine.
    I travel quite a bit, and plan to take my powerbook with me and do not want to have duplicate files on both systems... What is the best way to organize my information? Is there a way to access my G5 from a remote Powerbook? including emails? Remote desktop? File Sharing?
    Is it a big issue that the Powerbook is using Panther and the G5 Tiger? Could it be possible to install Tiger from the G5 dvd on the Powerbook?
    Any tips would be greatly appreciated. Thanks!

    Hi Francisco
    You could subscribe to .mac and use their sync service. You have up to 1 gig of online storage space, and could sync files between the two machines, including address books, browser files, personal files. More info at http://www.mac.com. I'm not sure if this works with Panther as well as Tiger, but I would assume it would.
    Note you will not be able to install Tiger on the Powerbook with your G5 DVD - not only is this against the licensing agreement, the DVD is most likely keyed to the type of platform it was provided with (i.e. the PMG5)
    With regards to the emails, you can keep these syncd between the two machines without .mac - just set up your mail retrieval settings so that a copy of the mail remains on the server, and is only deleted once the mail is deleted locally from your machine.
    Another way would be to keep your most important files on a USB memory stick, and put it in which ever machine you want.
    You can of course also set up file sharing or use remote desktop, however this would mean leaving the G5 turned on when you go travelling, and you would be reliant on Internet access in order to use it.
    HTH
    Simon

Maybe you are looking for