Using cisco-vpnclient framework in Xcode

Hello
I've tried to build Shimo http://projects.nexumoja.org/Shimo/. Shimo uses the framework cisco-vpnclient.framework included in the installer of Cisco. My problem is that Xcode gives an error on build : cisco-vpnclient/vpnapi.h: No such file or directory (#import "cisco-vpnclient/vpnapi.h").
Although I'm very sure it's there, because when clicking the framework in Xcode it even opens that directory. What's wrong? Can anyone help me or try it out.
Regards
Karel

Similar Messages

Need Cisco VPNClient for 10.8. Available? Will OS VPN work with Cisco?

Need to connect to VPN serve using Cisco VPNClient but cannot find client for OS 10.8. Last VPN Client I have only works in 32 bit mode. Anyway to use OS VPN?

Have you tried setting up a Cisco connection through the VPN network preference panel? You need an account credentials (name and password) as well as either a certiicate or a general password.
System Preferences - Network - add network port - choose VPN interface - choose Cisco IPSec type, then configure it as needed.
Matt

How to compile and link a C program that uses the FSEvents framework

I've been trying to compile a program from the command line that uses the FSEvents framework. I can compile and link the code in Xcode and it runs correctly.
At the moment I have the following command line:
cc -Wall -g -o Watcher *.c -framework CoreFoundation -framework FSEvents
I'm running Snow Leopard and noticed that FSEvents is not in the Frameworks directory under /System/Library as it was in Leopard.
The link error is:
ld: framework not found FSEvents
collect2: ld returned 1 exit status

I'm not sure what the point is if it builds in Xcode, but the build log should show you every command it uses throughout the process--copy and paste.

References are becoming invalid when passed to an actor using the Actor Framework

I have having an issue with passing a couple of references to an actor using the actor framework 3.0.7 (LabVIEW 2011 & TestStand 2010 SP1).
Some background:
My application has three main components:
Main VI -- is not part of any class and Launches UI Actor.
UI Actor -- Launches the teststand actor
TestStand Actor -- Initializes and starts teststand.
The two references showing similar behavior (invalid reference) are the TestStand App Manager control and the "Current VI's Menubar" reference. The App Mgr control is on the front panel of the UI Actor's Actor Core.vi. The menubar reference is retrieved in the block diagram of the UI Actor's Actor Core.vi
Now,
When I run the Main VI I get an error in the TestStand Actor's Actor Core.vi (Remember Main VI launches UI Actor launches TestStand Actor) because the App Mgr and menubar references are invalid (. I have checked and verified that in this scenario the references are valid in the UI Actor before it launches the teststand actor.
If I run the UI Actor's Actor Core.vi stand alone (i.e. run it top level) the App Mgr and menubar references are passed to the teststand actor, no error occurs, and the code functions as expected.
Why would these references be invalid by simply starting a different top level VI? Could it have something to do with when the references are passed vs. when the front panel is loaded into memory?
I tried putting the App Mgr control on the front panel of the Main VI and passing it to the UI Actor and then to the TestStand Actor. This works....
Anyone have any experience or knowledge to why this is occurring?

Generally, references in LV are "owned" by the hierarchy they are first created in, and the hierarchy is determined by the top level VI. Once the hierarchy goes idle or out of memory, the references created by that hierarchy are automatically closed. That's usually what causes something like this - the reference is created in one hierarchy (let's say the main VI hierarchy) and then that hierarchy stops running.
I don't know the AF well enough to say if that's really the case (I actually thought that it always launches a separate top level dynamic process, which I assumed is where the UI actor's core VI would always be called), but that might help explain it. If not, you might wish to post to the AF group in the communities section.
Try to take over the world!

Custom Branding Using the AJAX Framework L-Shape APIs

Hello folks,
i want to do this Tutorial (How To Apply Custom Branding Using the AJAX Framework L-Shape APIs) but i'm missing the source code.
Can anyone of you provide me with the necessary files?!
It was once located in Sap Code-Exchange (https://code.sdn.sap.com/svn/sap-portal-ajax-framework)
Thanks in advance.
Greetings,

I downloaded in May 2014 two EARs with a custom AFP from SAP:
com.customer.afp.fromscratch.ear
com.customer.sdesign.ear
I also have the images shown in the pdf....
If interested, send me an email (see profile).
Kai

How do I use Cisco Registered Email Service with 10.7?

I received a email via someone using Cisco Registered Email/Envelope Service. The authentication process required the latest version of JAVA for 10.7, which I downloaded and installed. When I try to logon, the screen hangs with the message "Loading Envelope Tools." If I press "open" again it states "Inactive tools." The alternate method is to open the mail via a secure Web site, which I can open, but I am unable to download attachments. To download attachments, I am directed to a page that begins with "x-msg:" and I get a message that says: "Safari can't open the address .. . because MAC OX doesn't recognize Internet Addresses starting with "x-msg:"

Thanks for the info Roger, this is indeed did work for me (at least the part about signing in on apple.com, haven't tried the rest). Since Apple does not allow for the merging of Apple IDs, my plan is to use the old me.com address (from the free trial) with iCloud but then forward all the messages from the old me.com to my current Apple ID. Problem is all my devices are already associated with iCloud. So... if I want to activate iCloud using the old me.com, how do I do it?
I have two ideas: 1) as you suggest, signing out and signing back in through the iCloud preference pane (either on Mac OS or iOS); but I'm worried this will have consequence - will I be able to sign back in to my main Apple ID account after doing this?
2) create a new user on my Mac and then sign in to iCloud with the old me.com address there, then delete the account.
Thanks for any help with this.

How to connect with VPN of type L2TP programatically in IOS8 ? canse NEtwoatically in IOS8 ? can i use NEtwork/Extension framework for this?rk/Extension framework for this?

I have a mobileconfig file and the VPNType is L2TP . How can i connect to this VPN programatically in IOS8 ?Apple's Network/Extension framework has methods which supports IPSEC and IKEV2 protocols(NEVPNProtocolIPSec, NEVPNProtocolIKEv2). Can i use Network/Extension framework to connect with L2TP type VPN ?

I have a mobileconfig file and the VPNType is L2TP . How can i connect to this VPN programatically in IOS8 ?Apple's Network/Extension framework has methods which supports IPSEC and IKEV2 protocols(NEVPNProtocolIPSec, NEVPNProtocolIKEv2). Can i use Network/Extension framework to connect with L2TP type VPN ?

What are the best practices for using the enhancement framework?

Hello enhancement framework experts,
Recently, my company upgraded to SAP NW 7.1 EhP6. This presents us with the capability to use the enhancement framework.
A couple of senior programmers were asked to deliver a guideline for use of the framework. They published the following statement:
"SAP does not guarantee the validity of the enhancement points in future releases/versions. As a result, any implemented enhancement points may require significant work during upgrades. So, enhancement points should essentially be used as an alternative to core modifications, which is a rare scenario.".
I am looking for confirmation or contradiction to the statement "SAP does not guarantee the validity of enhancement points in future releases/versions..." . Is this a true statement for both implicit and explicit enhancement points?
Is the impact of activated explicit and implicit enhancements much greater to an SAP upgrade than BAdi's and user exits?
Is there any SAP published guidelines/best practices for use of the enhancement framework?
Thank you,
Kimberly
Edited by: Kimberly Carmack on Aug 11, 2011 5:31 PM

Found an article that answers this question quite well:
[How to Get the Most From the Enhancement and Switch Framework as a Customer or Partner - Tips from the Experts|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0f0373e-a915-2e10-6e88-d4de0c725ab3]
Thank you Thomas Weiss!

Performance problems processing big volumes using ABAP-proxy framework

Hi
We have a custom application ABAP program running on a ECC50 ( WAS640 ) box - that reads change pointer information based on a Z* msg type and generates proxy messages - sending them to XI. Now in every run, this ABAP program pushes out 5000 to 10,000 messages ( one /customer change ) to XI using a proxy framework.
I find that the Z* abap takes very little time to read the change pointer information and generate the outbound messages out of the ECC50 box. The messages are queued in the ECC50 integration engine layer for a long time before they go out to XI. We even got a <b>HTTP_RESP_STATUS_CODE_NOT_OK</b> error for one of the outgoing messages since there is a long list of messages trying to go out to XI.
1) Is the above error because of the timeout in the http connection between ECC50 and the XI box - where do we increase the timeout settings for this ?
2)What are the tuning parameters that need to be set in such a scenario on the integration engine ( ECC50 ) and the XI box ( Integration server ).
We are using QOS as EO when the messages are sent out.
I set EO_INBOUND_PARALLEL and EO_OUTBOUND_PARALLEL tuning params in both of the boxes to 10 . Are these parameters enough - is there something else to be set to improve the performance ?( we have atleast two CPUs each on the WAS boxes ).
Please share your experiences / thoughts on handling such a high volume situation.

Hi Karthik,
<i>
1) Is the above error because of the timeout in the http connection between ECC50 and the XI box - where do we increase the timeout settings for this ?</i>
>>>Check this blog-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Also check this tuning guide
https://websmp106.sap-ag.de/~sapidb/011000358700000592892005E.PDF
But just one suggestion-
In this scenario, is your target is File or something else?
If it is a file, you can write your proxy in such a way that, for each proxy call only 100 messages will be pushed into XI, and in XI, you can collect these messages using BPM and get the one message at the end of the process.
Hope this helps,
Regards,
Moorthy

Using the Axis Framework in the SOAP Adapter

Hello experts,
I am currenty checking how I can easily manipulate sender and receiver details and how I could get attachments into XI.
I saw in the sap help that it is possible to use the AXIS framework from the SOAP adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/45/a39e244b030063e10000000a11466f/frameset.htm
As usual, the documentation is of the same quality SAP usually provides.
So my first question would be: This is a moduke to be used from the SOAP adapter right? I am asking because they also wirte about the AXIS adapter and its metadata.
In oder to get it working, I created in the NWDStudio a library project, added my libraries (to the root directory) and deployed it via SDM. Deployment is succesful but its not working.
SAPHelp says I should check for a MessageServlet - I ask myself how that could appear suddenly just by packaging some axis libraries...?
I am using for that the ESA box (NW04s SP6) - I was not able to see whether there are some dependencies to the SP - are they?
Thanks for your support!
Helge

Helge,
Axis is outdated and has some issues ..use Apache Soap instead its much better and easy to use.
http://ws.apache.org/soap/
Regards
Ravi

Error Logging into Cisco Agent Desktop whilst using Cisco IP Communicator

Hi there,
I am having an issue whilst using Cisco Agent Desktop Version 7.0. If I use a cisco IP Communicator ( softphone) i get following message, "Login failed due to a configuration error. Please ask you system administrator to associate your phone with the RM JTAPI Provider user ID according to the instructions in the admin guide".
If user logs in to a normal Cisco phone then logs into agent there are no problems.
Bit of a novice so your help would be appreciated.

Hi
In your AppAdmin pages on UCCX, in the Unified CM Configuration screen, there is an 'RM' user defined.
This will be a user in CCMAdmin 'Application Users', which has all your CCX phones associated to it. UCCX uses this to CTI control the handsets... you need to associate the CIPC phone to that user.
Regards
Aaron
Please rate helpful posts...

"No enought room on startup disk for Application Memory" when using the Accelerate Framework

Dear colleagues,
I am running what I know is a large problem for a scientific application (tochnog) a finite element solver that runs from the Terminal. The application tries to solve 1,320,000 simultaneous linear equations. The problem starts when I use the Accelerate Framework as the Virtual Memory size jumps from 142 G to about 576 G after the library (LAPACK) is called to solve the system.It does not do it if I use a solver that does not calls LAPACK inside Accelerate.
The machine is a mac pro desktop with 8 GB of ram, the 2.66 GHz Quad-core Intel and the standard 640 GB hard drive. The system tells me that I have 487 GB available on hard drive.
The top instruction in Terminal reads VM 129G vsize when starting. When I run the finite element application once the LAPACK library in the Accelerate framework gets called, the Virtual Memory (VM) jumps to 563 G vsize.
After a short while, I get the "No enought room on startup disk for Application Memory error"
This is a screen capture of the application attempting to solve the problem using the LAPACK library inside the Accelerate framework: Here are the numbers as reported by the activity Monitor.
Tochnog Real Memory 6.68 GB
System Memory Free: 33.8 MB, Wired 378.8 MB, Active 5.06 GB, Inactive 2.53 GB, Used 7.96 GB.
VM size 567.52 GB, Page ins 270.8 MB, Page outs 108.2 MB, Swap used 505 MB
This is a screen copy of the same application solving the same problemwithout using the Accelerate framework.
Tochnog Real Memory 1.96 GB,
System Memory Free: 4.52 MB, Wired 382.1 MB, Active 2.69 GB, Inactive 416.2 GB, Used 3.47 GB.
VM size 148.60 GB, Page ins 288.8 MB, Page outs 108.2 MB, Swap used 2.5 MB
I can not understand the disparity in the behavior for the same case. As I said before, the only difference is the use of Accelerate in the first case. Also, as you can see, I thought that 8 GB of ram memory was a lot.
Your help will be greatly appreciated
Best regards,
F Lorenzo

The OP had posted this question in the iMac Intel forum.
I replied along similar lines, but suggested he repost this in the SL forum where I know there are usually several people who have a far better grasp of these issues than I.
I would be interested in getting their take on this.
Although, I think you are coming to the correct conclusion that there are not enough resources available for this process, I'm not certain that what you are saying on the way to that conclusion is correct. My understanding of VM is that it is the total theoretical demand on memory a process might make. It is not necessarily the actual or real world demand being made.
As such, this process is not actually demanding 568GB (rounded.) As evidence of that, you can see there is still memory available, albeit quite small, in the form of free memory of 33.8MB and inactive of 2.53GB (the GB for that figure, above, seems like it might be a typo, since for the process when not using Accelerate the reported figure for inactive was 416.2 GB -- surely impossible) and 7.96GB used. The process, itself, is using 6.68GB real memory.
In addition, I question whether the OP has misstated the 487GB free drive space. I think that might be the total drive capacity, not the free space.
My guess is that it is the combination of low available memory and low free drive space prompting this error.
From Dr. Smoke on VM:
it is possible that swap files could grow to the point where all free space on your disk is consumed by them. This can happen if you are very low on both RAM and free disk space.
https://discussions.apple.com/message/2232469?messageID=2232469&#2232469
This gets more to the actual intent of your question...
EDIT: Looks like some kind of glitch right now getting to the Dr. Smoke post.
Message was edited by: WZZZ
<Hyperlink Edited by Host>

Problem accessing company resources remotely using Cisco VPN Client

I connect to my company's network remotely using Cisco VPN client both from a PC (v 4.0.1) and from a MacBook Pro (v 4.9.00)(same configs), and use Remote Desktop to connect to my work computer, and now i'm able to use Citrix to run applications on the company server.
The problem occurs on the Mac when I'm connecting from a location that uses the same private domain IP as our company's private domain. Our company's private domain is 192.168.1.x, so when I'm using the Mac on a WiFi router that happens to be set to 192.168.1.1, the Mac can connect using VPN but the remote desktop cannot connect to my work computer. Presumably, the Mac doesn't "know" that I'm trying to go through the VPN for the connection and not connect to something locally.
This problem seems to be unique to the Mac. Every Windows machine with the same client installed has no problems no matter what WiFi I've tried. The Mac works fine on any WiFi that is not 192.168.1.x.
However, since 192.168.1.x is very common (hotels, airports, etc., its a major problem with the Mac.
Suggestions are greatly appreciated!
Also, now that we're moving to Citrix, our administrator has created a webpage on the intranet that we launch applications from, but the Mac cannot find that page when connected to VPN from 192.168.1.x. Same problem.
Thanks in advance.

Hi,
I presume you have split-tunneling activated.
1. Make sure the 192.168.1.x is on the protected networks and on the MacBook client, disable "Allow local LAN access"
2. Create a separate group for the Mac users and assgn them a different pool (192.168.100.x )and advertise it in your company to point to the VPN Concentrator.
3. Use the NAT feature on your VPN concentrator.
If this helped, please rate.
Regards,
Daniel

Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

You will probably find better support about the features of the Webex app on their support page here: http://www.webex.com/products/web-conferencing/mobile-iphone-ipad-faq.html
Doesn;t look like it's listed as a feature of the iPad app.

How to use the adapter framework sample_ra.

hi..
I have deployed the sample_ra adapter framework code through NWDS. Now how to use the adapter framework into my scenario.Please answer elaborately .How to call this adapter framework while configuring the communication channel.

hi
Follow these links I think it will helps you
http://www.sap-hefte.de/download/dateien/1241/140_leseprobe.pdf
NWDS and generate java proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/32/43d84072378031e10000000a1550b0/content.htm
http://msdn2.microsoft.com/en-us/library/ms944509.aspx
thanks and regards
santosh

Using cisco-vpnclient framework in Xcode

Similar Messages

Maybe you are looking for