Using CS2/Flash Pro 8 with Mac Mini...

Hello Everyone,
I am considering purchasing a mac mini and integrating it into my home theater, which I imagine would be awesome. I was wondering though if I would get good performance out of it when using Creative Suite 2/Flash Pro 8. Some people I've talked to say 'yea' and some say 'nay'. Opinions appreciated.
-Ricky Bobby

hello my friend. I am graphic designer, and buys one mac mini intel to me, but is a small problem! the applications cs2 and study 8 not made update for the processor intel, run very badly. I recommend that if you must power PC G5 you are with her until half of next year, when it leaves to the market the new updates the programs, if no, beam as I and work a little slow but with a better equipment until they leave these updates.

Similar Messages

HT4664 Can I use final cut pro X on " Mac mini" ?

Can I use final cut pro X on " Mac mini" ?

depending on what model: for sure yes, it does!
I did use FCPX on an old MacMini, c2d, 2.26GHz with 8GB Ram (using proxies made editing easy).
My actual work-horse is a MacMini i5, late 2012, 16GB Ram, plus some ext. usb3 drives = perfect for my needs! (costs vs. power)
I'm using two cheap 2.5" Toshiba 1TB usb3-drives, combined with MacOS' built-in DiskUtility as a Raid0 = 150mbps for under 100€ ... not professional (=raid0 contains a small risk of data loss), but again: best €-vs.-HP ratio

Can I still use Appleworks 6.2.9 with Mac Mini 2012?

Can I still use Appleworks 6.2.9 with Mac Mini 2012?

Yes, MlchaelLAX, the KVM switch allow one to use one monitor, one keyboard, and one mouse between two computers. It has been so long that I'm not sure how to find the MODELS to the G4 and G5. Unless you mean what makes the Mac tick. The G5 is a dual 2GHz PowerPC, with 2 GB DDR SDRAM. The G4 is a bit slower, will look tomorrow.
I want/need a newer Mac model because unlike the days before OS X, all software was included as the newer OS were added, not so today. I'm still using Tiger because I still use a couple programs from the old days. When I eventually purchase a new model, I will have to buy all new software. That's find if one has plenty of money and wants to learn everything from scratch, but I'm hanging on as long as I can.
I tried TenFourFox, but it didn't allow video, of course since I tried Michael's suggestion, the video might not be an issue. So far, every thing works the way it should.
I have a lot of faith in Mac users, their loyalties to Apple is what kept Apple floating when many thought it would sink. These folks are survivors; I only wish the apple people on the top appreciated that loyalty today, but I guess things are too good.
Thanks to all for you kindness. Tomorrow I will show my husband how to remove his yellow threat on his G4. If anyone can answer any other questions, please know I will keep viewing this post.
Patt

Using iPad and LogMein app with Mac Mini Server

Hello everyone, I'm new to the community and I would like to ask your opinions on something I'm considering.
I'm currently using a MacBook Air beyond its capabilities. I'm running a dual system via Parallels since some of my work programs are Windows based.
I'm planning to pass the MacBook Air down to one of my employees but I'm stuck on what I will purchase to replace it.
I like the new MacBook Pro, but I don't like the $2200+ price tag. So what I'm considering is buying a Mac Mini Server ($900) and setting it up in my office with a HDTV as a monitor because I use construction design programs and the laptop screen is just too small for large drawings. The Mac Mini also has 1TB storage vs 256GB on the MacPro. I already have an external disk drive so that's no issue either.
Also, since I still need mobile convenience, I'm considering downloading the "LogMein Ignition" app ($130) and using this to log in remotely with my iPad for complete access to all of my files and programs.
What are some pros and cons I should consider before making this move?
Thanks in advance for the help!
Kevin

> If your server is behind NAT, there is almost certainly no need for packet filtering and you should disable it.
I disagree, Linc. PF is very useful to block known bad IPs and brute force attacks, which are an hourly occurrence, especially on ssh. I use this PF configuration for OS X, which blocks brute force attacks, updates IP blocks from emergingthreats.net, and more. My logs and pf table "bruteforce" are full of attacks and blocked sites (sudo pfctl -t bruteforce -Ts). I also run snort on OS X and can see that the snort alert triggers are greatly reduced by simply blocking all these packets at the network layer.

Using Cortona 3D Plug-in with MAC Mini

I'm trying to find some free software that will read a wrl 3d file. I installed the Cortona 3D Plug-in and have tried FreeWRL with no success on my MAC Mini.
Any suggestions for 3D software that works on the MAC Mini - I'm running Leopard.
Thanks!

FreeWRL and Cortona didn't work on my MAC Mini but Octaga Player (freeware) works great. Problem solved!

Using xerox documate 510 scanner with mac mini

No drivers available on web for mac. I have searched in discussion board and seen posts for Vuescan. I have downloaded this software, but my mac mini doesn't recognize my scanner. Any help would be great. Thank you

I think you may be out of luck for now. I'd recommend emailing Ed Hamrick, who is the guy behind VueScan, and see if there is any possibility of Mac support for the 510. Apparently VueScan does support other Documate models.
I suspect the lack of Mac support in Vuescan is due to Xerox using an undocumented programming interface.

Using small CD-ROM's with Mac Mini

Can I insert a small or mini CD_ROM into the Mac Mini slot? I bought a USB turntable and the software for it is on a mini CD-ROM. I am worried about inserting it.
Anyone know?
Thanks

There are adapters available that snap around mini CDs to make them the same size as a normal one.
You might have to shop around as you don't want any that make the CD thicker than 1.2mm, and it might void your warranty if you use it. Apple itself recommends you don't use mini CDs at all.
http://support.apple.com/kb/HT2446?viewlocale=en_US
Message was edited by Phelyan: changed thickness to err on the side of caution.

Using an XBox 360 controller with Mac mini

Is it difficult to pair a 360 game controller to a Mac mini? I do most of my gaming with my iPad + Apple tv and it usually works fine, but Bioshock is Bioshock so I'm thinking of getting that and an XBox controller.

Hello
Maybe the controller is faulty.
Have you tested it on your Xbox 360 and does it work?
Can you also test another controller?

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

The best audio interface with Mac Mini using new & existing equipment?

Hi,
I got my existing set-up back in 2003. I'm now about to update it.
I've talked to Apple Technical Support re which computer is best for me.
Some important questions remain in terms of the audio interface or sound bridge I should use.
I've detailed below my existing set-up, my existing configuration, my desired set-up (as recommended by Apple expert) and questions I have.
Existing set-up:
Hardware...
1. ViewSonic HDMI 1080p Full HD LED monitor
2. PowerMac G4 (PowerPC processor) computer
3. PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
4. MOTU 2408 mk3
5. Quested monitors
6. Focusrite Session Pack ff ISA220 compressor
7. MOTU micro lite (midi-usb interface)
8. Keyboard (yet to choose - I'll explain later)
9. ADK Tube Condenser Commemorative Edition microphone
10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
Software...
11. Tiger 10.4.11 operating system
12. Logic Studio 8 music program
Desired set-up:
1. ViewSonic HDMI 1080p Full HD LED monitor
2. Mac Mini full spec = £999.00
3. _______________________________________
4. _______________________________________
5. Quested monitors
6. _______________________________________
7. _______________________________________
8. _______________________________________
9. ADK Tube Condenser Commemorative Edition microphone
10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
Software...
11. Top-end operating system = Comes with Mac Mini
12. Logic Pro X music program = £139.99
Existing configuration:
ViewSonic HDMI 1080p Full HD LED monitor goes into PowerMac G4 (PowerPC processor) computer
PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
MOTU 2408 mk3 used as my audio interface for sound in and sound out. This means that the sound comes out of computer via the MOTU 2408 and out of my Quested monitors (they are active so self-powered) which are attached to the MOTU's outputs.
When I record vocals I sing into my ADK microphone (this microphone sources its own power from its own box which also feeds it Phantom Power) which is connected by a mic to jack cable to the Focusrite compressor which is connected by jack to jack cable to the MOTU 2408 which then goes into my computer via a firewire cable.
When I play keyboards or use my keyboard as a midi controller it connects to my computer via the MOTU micro lite (midi-usb interface).
I don't currently have a keyboard. I used to use my basic Yamaha PSR-540 keyboard as a midi controller but as it's not weighted and faulty I needed to get a new one. We got a new one via Thomann which was the M-Audio Pro Keys 88 keyboard but this quickly became faulty. We returned it and have since been considering other weighted keyboards. I am simply wanting a keyboard with Aftertouch, either 76 or 88 keys, weighted keys and very importantly, hammer action where the action is fast. I don't care for other controllers on the keyboard, on-board sounds, iPad compatibility or whatever.
My Questions:
Q1) Can you recommend any keyboards meeting my specifications?
Q2) I can't imagine any of the Blue or other USB mics competing with my ADK and I'm quite happy with it. For vocals and when I've wanted to play the keyboard in as audio (not as a midi controller) I've used the Focusrite compressor to boost the sound. I'm not using many functions/presets on the compressor as I know it's best to record the sound of vocals mostly raw, is this correct, and if so is it worth me continuing to use this compressor or sell it?
Q3) Do I need to have the MOTU micro lite (midi to usb) unit? Don't most keyboards these days connect direct usb to usb on the computer?
Q4) I'm happy and used to the sound out from my Quested monitors. I'm happy and used to the sound in using my ADK microphone. What do I need for these to work best with the Mac Mini? Is my MOTU 2408 good for this, or is another MOTU product needed, or another product altogether?
Q5) Depending on (Q4) do I need a soundcard installed in the Mac Mini as I read on a forum that these days the audio interface acts like the soundcard?
Q6) I have such a bad connection to the internet it's like I have Dial-up!!! I use Airport Wireless which is connected to a router downstairs, which is 02 Broadband. Internet's not an issue downstairs on my girlfriend's intel PC which also uses a wireless connection but not Airport. Is this a problem because of my Airport, or do I need to get a router for upstairs, or should I connect it directy to the router downstairs by ethernet cable?
Many thanks!

Is there a reason you don't want to use your current Tascam?

How can I use Pegasus R6 with Mac mini?

I bought Pegasus R6 (Promise Technology, Inc). I connected to my Mac mini. But Pegasus R6 did not appear on desktop. In order to use Pegasus, MacBook Pro?iMac must have MacBook Pro EFI Firmware Update installed. But Mac mini does not have EFI Firmware Update. How can I use Pegasus R6 with Mac mini?

Does your Mac Mini have thunderbolt?

Which USB 64GB flash drives are compatible with Mac Mini?

I need to use a USB 64GB flash drive, formatted for both PC and Apple, with my Mac Mini. The largest USB flash that Apple sells is 32GB. Which USB 64GB flash drives are compatible with Mac Mini. If most are, are there any that I should avoid? Thanks.

I'm assuming that when I connect the USB to the Mac it gets formatted for Mac. Then I follow your directions and it gets formatted for Windows, in addition to Mac. I'd choose ExFAT since it is a 64GB USB.
No no. A brand new drive will be formatted as "something", most likely something for Windows, and that could be FAT (which a Mac can also read and write to) or NTFS (which a Mac can read but not write to).
So, you'll need to make sure it's formatted as ExFAT, instead of what it is. A medium can be in always only one format.
About the expense: Fry's is advertising a 64GB Patriot USB Flash Drive for $22.99. Is that considered expensive for a USB flash drive?
That'd be dirt-cheap, I'd say. Expect it to be very slow.
I've read answers that are somewhat related to my question, and some warn that USB's are slow. Maybe I should consider another option?
USB is not that slow (though there are faster buses). And USB flash drives come in different speeds, where especially the "write" speed can vary hugely.
The advantage of USB is that it's widely spread, and lots of media is on the market, making it very affordable. The only other affordable alternative is an external HDD, I'd say, where you get much bigger drives for less money than a small 64GB USB flash drive...
My main objective is that, in switching from Windows to Mac, I want to be able to access Windows files that I've backed up to a Seagate Free Agent. I bought a LaCie with the Mac Mini, but will still want to use the Free Agent. I need to reformat the Free Agent for the Mac (hopefully for Mac and Windows; while learning to use the Mac and Numbers and Pages I may have emergency jobs that I'll need to do with Excel and Word on the PC), so my plan is to move the files on the Free Agent to the 64GB flash drive, reformat the Free Agent so that, hopefully, the Mac will read the files on it after I move them back to the Free Agent from the USB.
Why don't you copy the content of the Free Agent meanwhile to the Mac's HDD? Then copy it back after re-formatting the Free Agent? Why would you need an extra USB drive?
Any ideas you have about how to achieve this objective will be appreciated. Maybe I should buy a third, small, external hard drive? Maybe there is a way to move the Windows files from the Seagate to the LaCie?
Exactly... you seem to have already extra space on the LaCie drive...
My understanding is that the Apple Store does not want to move files from an external hard drive to the Mac.
I don't know where this could origin, but that's as wrong as it is funny. What has the App Store to do with you moving some files from one drive to another?
I should add that I don't have enough remaining free space on the PC hard drive to hold the files on the Free Agent, so that is not an option.
No, but you have a Mac with a built-in HDD, and you got the LaCie drive. Again, the Mac should have neither a problem to read from the Free Agent, nor to write to the LaCie.
From what you're telling here, you have lots of space already with what you have, I can't see the need for the USB flash drive, at least not for the purpose you mention here.
It seems that your understanding is that (a) a drive comes in a particular format for, or not for Mac, and you can't change it, and (b) that for some reason (App Store?!) Macs aren't allowed to copy files from external files. Well, both is wrong...

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06

Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06 Intel Core Duo
I can't figure out how to get this to work. Is it possible?

WildBull wrote:
Will it work if I connect via usb instead of firewire?
No. There is no "USB Target Disk Mode".
Just so we're clear, when you start your Mac mini in FireWire Target Disk Mode (TDM - holding T on startup), do you see a FireWire icon on the Mac mini's display? IIRC, it's not required that the Mac mini be connected to a display for TDM, but it would help diagnose whether or not the mini is actually starting in this mode.

Im using a Macbook Pro, running a Mac OS 10.6.8, with 400GB free of space and it is running slow. It takes 10 minutes to start up and things like that. What should I do?

Im using a Macbook Pro, running a Mac OS 10.6.8, with 400GB free of space and it is running slow. It takes more than 15 minutes to start up and things like that. I cant seem to do anything as it is so slow. The 'beachball of death' is also present during start up. What should I do? Please help

Try these two steps first.
Get the Original Installation disk and boot the MBP holding down the C key. When you get to the point where you see a menu bar on the top of the display, select UTILITIES. From the drop down menu select DISK UTILITY>FIRST AID. Run verify and repair.
See if there is any improvement.
Try a Safe Boot:
http://support.apple.com/kb/HT1455
This might indicate that third party applications are an issue.
Ciao.

I can't use my Philips monitor with Mac mini

I can't use my Philips monitor with Mac mini, I am using a HDMI to VGA cable to connect them. But no signal on my Philips monitor.
My Mac mini is in a good condition, it can connect with my HDTV, the BENQ monitor at my office, but I can't make it connect with my Philips monitor.
I dun know what happen.
Please help!
Thanks!

The two are incompatible, HDMI is a digital signal and VGA is an analog signal. You need a monitor with a HDMI port or a DVI-I port, these are both digital signals. DVI-I gives the best output.

Using CS2/Flash Pro 8 with Mac Mini...

Similar Messages

Maybe you are looking for