Using DBConsole In Dataguard Setup

Hi,
We have 3 node RAC Primary and a 3 node RAC Standby part of our Production Dataguard setup. We are using DBConsole to monitor the databases in our environment.
The agent and console was up on the Primary site and the Production database was being continuously monitored using the GUI.
Recently as part of maintenance activity the database roles have been switched.
My question is :
Can we just proceed to start the emagent and console on the new primary site (which was not running initially as it was a standby previously) and continue to monitor the environment?What is the risk involved in doing so?
Regards,
Santosh

Hello;
I know it's not the question you asked but Data Guard broker makes this simple and is a great option.
DGMGRL> show configuration;
If I were going to use EM I would make sure that:
1. I deploy Enterprise Manager agents to the both primary and standby servers.
2. The Standby database(s) are added to to Enterprise Manager.
Best Regards
mseberg

Similar Messages

Oracle 10g Dataguard Setup

Hi Guys,
I am planning to have Dataguard setup for my single instance database in HP-UNIX.
Please let me know the pre-requistes for this setup. I currently have Oracle enterprise edition installed. Do i need any specific application, tool or software installed for this, etc ?
Also, help me out with the configuration steps.
Thanks.

user9098221 wrote:
Hi,
Thanks. Apart from RMAN, do i need to have anything else installed for the setup ?
Also, if i choose the manual method(using sql's), do I need to install anything ?
I understand these are basics. Please bear with me.
Thanks.Hi,
On standby side need following steps.
1. You must install Oracle Database Enterprise Edition (same version, same patchset) Software only.
2. Add Listener, and add standby service name
3. You must create folders for data files, flash recovery area and diags.
Not need any additional tools.
Regards
Mahir M. Quluzade

Using migration assistant to setup a new iMac from a TimeCapsule backup?

how do I use migration assistant to setup a new iMac from a TimeCapsule backup

OS X: How to migrate data from another Mac using Mavericks

How to use the DISPLAY RECORD Setup Command in an etext file?

Hi All,
How to use the DISPLAY RECORD Setup Command in an etext file?
I want to display a <NEW RECORD> conditionally. The condition will be based on the data coming through from the xml file.
Please help me with an example. The BI User guide also doesnt show any examples.
Your help is appreciated.
Rgds,
Kiran Panditi

Hi,
You can use vb coding in BEx Analyser to calculate your unit price. For this you have to first display the attributes of your object "XYZ". Then you can use VB cosing to calculate the value for the unit price field.
One more thing cna you clarify whether is it display attribute or variable ?
Regards,
Balajee

Create OMF tablespace using DBConsole

How to create a tablespace using DBCONSOLE(10gr2 OEM)? The OEM screen keeps asking for the datafile name, which invalidates the OMF feature if i don't want to name the datafiles and have oracle decided it.
Thanks
-Ash

Hi Scott,
This is the output of the query
SQL> select file_name||':'||tablespace_name from dba_data_files where tablespace_name like 'FLOW%' order by tablespace_name;
FILE_NAME||':'||TABLESPACE_NAME
/sid/oradata/data01/FLOW_1.dbf:FLOW_1
/sid/oradata/data01/FLOW_5.dbf:FLOW_1
/sid/oradata/data01/FLOW_2.dbf:FLOW_2
/sid/oradata/data01/FLOW_3.dbf:FLOW_3
/sid/oradata/data01/FLOW_4.dbf:FLOW_4
/sid/oradata/data01/FLOW_6.dbf:FLOW_5
/sid/oradata/data01/FLOW_7.dbf:FLOW_5
7 rows selected.
Please let me know, if anything else needs to be done.
Thanks,
Moosa.

Rman Recovery using backup created using dbconsole

Thanks for taking my questions. First, I see there is another person asking about rman recovery but I am hoping mine is not identical.
BACKGROUND
Archiving and flashback is on.
Database is 11g.
Full on-line database backup is done using dbconsole (oem) and includes control, spfile and archive logs.
RECOVERY
I am testing my recovery to a new serve.
I installed oracle
Restored a backupset from one backup to the new servers flashbackup area.
Recovered the spfile ok
Recovered the control file ok
Found last seq number ok
Restore database ok
RECOVER DATABASE UNTIL SEQUENCE - NOT OK
Error=DATAFILE 1 MUST BE RESTORED FROM BACKUP OLDER THAN SCN
QUESTIONS
Where did I go wrong?
Could it be my rman backup didn't backup all necessary archive logs?
How do I fix this and can I fix it using dbconsole?
Also, is it still possible to fix the test server without loading any new files?
Thanks!
Kathie

Hello,
To answer your questions, it looks like your backup is out of sync with SCN for datafiles with your Oracle 11g database.
What you need to do is first check the low SCN and current SCN for your database to that in your RMAN backup files.
You can check backups in RMAN command line with
RMAN> list backup;
using target database control file instead of recovery catalog
List of Backup Sets
===================
BS Key Size Device Type Elapsed Time Completion Time
1 349.08M DISK 00:01:14 24-JAN-08
BP Key: 1 Status: AVAILABLE Compressed: NO Tag: TAG20080124T180119
Piece Name: C:\ORACLE\FLASHBACK\ORCL\BACKUPSET\2008_01_24\O1_MF_ANNNN_TA
G20080124T180119_3SLJQOFO_.BKP
List of Archived Logs in backup set 1
Thrd Seq Low SCN Low Time Next SCN Next Time
1 1 1030802 04-JAN-08 1053767 05-JAN-08
1 2 1053767 05-JAN-08 1104812 06-JAN-08
Then open another prompt window and SQL*PLUS session as sysdba privileged account:
SQL> select name, current_scn from v$database;
NAME CURRENT_SCN
ORCL 4089528
You need to make sure that you are trying to restore database with RMAN with a backup for the SCN numbers that are older than the current database SCN in database or Oracle will complain.
Enterprise Manager dbconsole will work but nothing beats the power of a command line.
Use the automated repair options for the Oracle 11g Database Repair advisors.
1. Connect to RMAN
rman target=/
RMAN> list failure;
RMAN> repair failure preview;
RMAN> repair failure;
For more details, Arup Nanda has a good overview of RMAN with Oracle 11g:
http://www.oracle.com/technology/pub/articles/oracle-database-11g-top-features/11g-rman.html
Hope this helps you out.
-Ben
Cheers,
Ben Prusinski
http://oracle-magician.blogspot.com/

Using my work email setup on my iPhone 5 I am unable to send the email on my own hotmail account. Please help !!

Using my work email setup on my iPhone 5 I am able to send emails to all my colleagues on same network but I am unable to send the email on my own hotmail account. Please help !!
I have setup email using POP settings.

Okay, so you are sending mail from a work account on the iPhone 5, however if you try to send it to your hotmail or gmail accounts from the same work account, they are not received on the hotmail or gmail account? Is that correct?
YES - (The message is shown as delivered as its moved to sent folder)
Then secondly, if you attempt to send mail to anyone from the hotmail or gmail accounts on the phone to anyone at all, they show sent but never arrive. Is that correct?
NO - I dont have any hotmail/gmail account setup on my phone. Its a new work phone and I only have work email account setup on the phone. I was just trying to send a test email to my hotmail and gmail account but failed to receive those using my work email account on iphone 5.
I have tried receiving email on my work account on iphone, sent from my hotmail account (using web) and received it.
Incoming is all fine and I am able to receive emails from all sources but outgoing is only sucessful if I send it to anyone using my company's email account.
Sorry if my question wasn't clear earlier. I really need to fix this..
Best regards,

Single node Dataguard setup

Please can somebody provide me the source for step by step single instance physical standby dataguard setup for my single instance database.

http://static7.userland.com/oracle/gems/alejandroVargas/DataGuardPhysicalStandbystep.pdf
I got this PDF from the above link, do you have one for 'single instance to single instance dataguard setup' as in the one you sent from Page 17 of 27 it starts telling about RAC which is confusing me. Please send if you have any other pdf or source.

Can I use configurator to skip setup on individual ipads

Can I use configurator to skip setup on individual ipads

No matter what deployment method you use, be it Configurator, IPCU, Profile Manager, or a commercial MDM you will have to touch each iPad a make a few taps to get the ball rolling.
http://krypted.com/iphone/using-apple-configurator-for-automated-enrollment/

Dataguard setup using hot backup files

Hello,
I am planning to setup dataguard using Hot backup (Not RMAN) files from the primary instance. I have a few doubt as, How shall I recover the Standby database using the archive files generated while taking hot backup of primary? Shall I directly execute the "alter database recover managed standby database" command? Will this command take care of the archives generated durring hot backup also?
Appreciate any help on the above.
DB Version:10.2.0.4
Regards.

Guys by using below procedure you can rebuild your data gurad by using manual hot backup.
1) On the primary database, defer the archival of redo data .
ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2=DEFER;
2)
put primary database in backup mode
copy all the datafiles from primary database to Standby database (you can copy to other location in primary server and tar&zip it and send it to stand by and unzip and untar there)
Once you copy the datafiles to another location on primary server,you can use below command for tar and zip
go to the copied datafiles location and issue below command
tar cvf - .|gzip -c > /dump/backup/drdb_backup.tar.gz
put primary database in end backup.
3) create stabdby controlfile by using below command and send it to standby server
alter database create standby controlfile as '/dump/drbackup/2standby.ctl'
4) copy all generated archive logs (from the time of database begin abckup) from primary database server to standby database log_archive_dest location.
5) on standby database once we placed all datafiles and controlfiles in place use below commands
export ORACLE_SID=standbydb
SQL> starup nomount;
SQL> alter database mount standby database;
SQL> recover standby database;
--AUTO
SQL> alter database open read only;
SQL> shut immediate
SQL> startup nomount;
SQL> alter database mount standby database;
SQL> alter database open read only;
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
6) On the primary database, issue the following statement to reenable archiving to the physical standby database:
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2=ENABLE;
Thanks & Regards,
Satish Kumar Sadhu.
Edited by: Satish Kumar Sadhu on Apr 10, 2013 11:05 PM

How do I use family share to setup a new device for my child when I don't already have one with iOS 8?

My kids want apple products.
I don't own any.
I buy an iPad for one and an iPhone for the other, but I can't set them up because they require me to setup Family Share and create accounts. I can't do that because I don't have a device with iOS 8 already setup.
I do have a valid AppleID. I've had it for years. I use it with iTunes.
I wish they would just let me manage the account setup and Family Share through a web page. Right now I'm dead in the water and Christmas is approaching fast.

I have found a solution.
It turns out that all the documentation I could find on the web was wrong. At least in the case of the iPad I just bought. I did manage to borrow a device so that I could setup family share and the kids accounts, but when I went to enter the new existing account into the setup of the iPad, it then started leading me through the process to create the account (clearly it didn't bother to check if it really existed already). In reality, I believe had I just entered a "new ID" for my child, that didn't exist, it would have led me through the same process. As it was, I had to back out to the first screen and skip the creation process, since I had already created the IDs elsewhere.
The only part I'm not clear on, is if I still would first have needed to turn on family sharing for my ID before starting this whole process, or whether it would automate that while creating the child AppleID.

Error While deploying Using JMS Listener- Environmenmt setup? Help!

I have a message driven bean (actually someone else wrote it and left no deployment procedures)
I use a resource provider and adapter
I listen to a jms queue and use a web service to send messages to a bpel process
I compile fine. The code works on other instances. Some environment variables were set that are unknown.
When I deploy to a new oc4j container, I get this error...it is baffling everyone. I really think it has some environment setup I am not thinking of. What could it be?
Someone please help!
What could this refer to? The error message is quite deceiving.
BUILD FAILED
/home/iasgcsdc/DS_028/Send/Send/build.xml:93: Deploy error: Operation
failed with error:
[GCEDC-DS-Send:ejb:SendServiceMDB] - The method init on the
interceptor class mil.usmc.gcss.SendServiceMDB (or one of its superclasses) does not exist or it does not
have the expected argument type: javax.interceptor.InvocationContext.
There is no method init being used that i know of.
The class I wrote SendServiceMDB implements MessageListener
I will post code later.
It uses a '@Resource' annotation at one point...could this be the cause.
Any help or guesses would be so much appreciated. Thanks,
Jason

Hi Peter,
Thanks for the reply.
The issue was with the Memory heap space allocated by Ant.
I have created an environment variable "ANT_OPTS" with the value -Xms512M -Xmx512M
and it works great.
I tried your approach as well and even that works out perfectly.
Edited by: Jaydev Doshi on Oct 23, 2009 10:43 PM

Use of 32 bit setup files of EPMA 11.1.2 to install on windows 7

Hi All Experts,
I need guideline to download the Hyperion EPMA 11.1.2 , from which link I could download and can I use 32 bit setup files to install on 64 bit WINDOWS7.
is it compatible and possible to have Essbase,HFM,FDM HFR tool properly with 64 bit windows 7 for 32 bit setup files of 11.1.2.
Please share your valuable suggestions.
Thanks in advance

Thanks John,
one more thing I want to know about installation can I install Hyperion 11.1.2 on XP , as my intel motherboards LAN device and driver is not supported for server 2003/2008 OS and intel recommended to use WIN7/XP os only, I need Essbase only so which files to be download and also can I install it on XP machine,
I tried for 11.1.3 last year and it worked for essbase (less components of hyperion), just thinking out of certification matrix.
If practically possible let me know.

How to video via email using flash media playback setup?

How I can send video via email? I send every week an email that contain a link to WMV file on our website. I am trying to send the same thing using flash media player. Here the html generated via flash media playback setup and will not display in an email. Any advise
<object width="400" height="400"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value="src=http%3A%2F%2Fwww.4GodIsLove.com%2F%2FTV%2FFlash%2FLydua_Fares_Elhaana.flv"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="400" height="400" flashvars="src=http%3A%2F%2Fwww.4GodIsLove.com%2F%2FTV%2FFlash%2FLydua_Fares_Elhaana.flv"></embed></object>

salma_salma wrote:
Thanks Janaki but how can I add a new application? I tried to do it using Flash Media Administration Console but it doesn't work
Hi Salma,
To add an application to FMS follow the below steps
1. Create a folder "my_app" under "$InstallRoot\applications" directory.
2. For simple server side code... add "main.asc" file inside "$InstallRoot\applications\my_app" directory which has the content like
application.onConnect = function(clientObj){
trace('onConnect function");
return true;
3. To add streams to the application, creates 'streams' folder inside "$InstallRoot\applications\my_app" directory, within that create '_definst_' folder and then place your FMS supported streams within the directory. So your streams for the 'my_app' application will be at "$InstallRoot\applications\my_app\streams\_definst_\mystream.flv".
You can connect to this application using the url "rtmp://your_server_name/my_app". To play the stream mystream.flv using video player, use the url "rtmp://your_server_name/my_app/mystream.flv".
Regards,
Janaki L

My office uses windows based computers setup with a server setup. Can an apple server emulate or find compatibility with an apple server or apple computer linked to the server and allow full file sharing and printer sharing with pc's?

I have 11 computers all pc's linked to an old windows server and all used primarily for microsoft office and printer sharing as well as for internet browsing. Can an apple joining the setup cause compatability issues?

HI,
grey-haired IT guy here, old enough to come from the counter culture. I ran (COO, including IT & compliance) a third billion dollar financial institution all on Macs 15 to 20 years ago. All the "experts" had a long list of reasons it would be impossible, and it drove the examiners nuts, but it's only gotten better.
So your benefits are going to be mostly in ease of administration after the learning curve, less aggravating glitches, better overall reliability, and arguably better security. And reductions in cost and improvement in time to implement changes.
In my current environment of mostly dozens of PCs, the moment I let the OS X Server be the domain master controller, the Windows network browser settled down and instantly showed network neighborhoods like it should have. (We may have some forgotten pre-NT machines plugged in somewhere -- this is NOT a financial institution).
Couple anecdotes might explain the feeling of coming in out of the cold: Putting a test copy of a web site from the cloud onto the Mac server, XAMPP or MAMP is pretty much already there. The site has a couple WordPress blogs, and they need .htaccess files, and Apache needs an option set to permit remapping URLs. After much searching far and wide to find why it didn't seem to be working, I found the checkbox right there on Apple's management screens. Much easier than editing .conf from command line. Linux web admins hate it.
Tale # 2: We aren't fully Windows domain controlled -- just using the old network browser. Need to upgrade that, and I Googled quite a while trying to understand what needed to be done to use Apple's Open Directory instead of setting up an Active Directory on Windows -- both SLDAP3. Turns out one reason I couldn't find much is there isn't much to say: it just works. Just join the domain from a Windows machine.
One more and I'll be quiet a bit. We use the Wiki collaboration which is nice enough as far as it goes (no spreadsheets, fatal flaw) and it occupies the server's native web site slot. So the test copy needed to be another site. Easy enough -- site setup is all GUI and works fine, but WordPress could not handle a multiuser blog coming to a non-standard port (other than 80) so I needed a second IP multihomed on the server. How do you do this? Go to Network in the System Prefs, click on the Ethernet interface and select "duplicate". Set your IP address. Done.
In summary a Mac OS X Server is a better server for a Windows shop than Windows Server 200x.
My bottom line for choosing Apple: lower blood pressure. I SHOULD be money. After all is said and done, it's about money. The incredibly more pleasant experience is a free benefit. You'll pay more for better hardware, but way less in time and trouble. And you won't be hounded on a daily basis to update the system. Not that Adobe or Firefox are any better about it on a Mac, but the Apple approach to updates stays in the background.
Think different. Simplify. Focus. Enjoy your work.

Using DBConsole In Dataguard Setup

Similar Messages

Maybe you are looking for