Using Design Science's MathFlow components with FDK9

Hello all
Has anyone tried to use MathFlow components to import editable MathML equations to a FM9 document by means of FDK ?
I managed to display editable EPS MathType equations, but quality is not good enough to me, and I should probably meet charset problems in the future if I used it.
Since the equations I have to display are captured with MathFlow on Arbortext Epic Editor, I think I should not have any charset problems when using MathFlow components...
But is it possible ? And if so, how ?...
Thanks a lot.
Franck

By "quality" of the EPS are you referring to the image displayed on screen? If so, then are you aware that this is only a low-res preview image in the EPS file. If you create a PDF, you will see a properly rendered high-res version. Also note, if you are printing directly from FM to a non-postscript device, then you will only the get the low-res preview.
Regarding MathType possible character set issues, the generated EPS files only include the font references (i.e. they do not have the used characters embedded), so you must have your Distiller component properly configured to know where the MathType fonts are located.
Another possible method of getting MathML into FM is to do a two-step via the Maple package (http://www.maplesoft.com), which has a maple2mif plug-in with the source code available here: http://www.mirrorservice.org/sites/ftp.inf.ethz.ch/pub/software/maple/5.3/share/maple2mif

Similar Messages

Using flex 2.0 charting components with flex 3

I purchased and installed a flex 2 charting components
library so i could use it in my AIR application development. It
installed alongside the 3.0 beta visualization components so that I
now have two copies of each component in my charts folder. I can't
see how to ensure that the right library is used so that the charts
actually appear when i run my app. I'd hate to think i just threw
away $300 so any help would be greatly appreciated - .

Are you using Flex Builder 3? Flex 3.0 beta Data
visualization components are available as part of FB 3 only. You
can select either 2.0.1 hotfix 3 charts (consists of only
charts.swc) or 3.0.0 data visualization (consists of
datavisualization.swc). through multiple sdks feature of FB3. For
flex 3 beta, flex 2 charting key will work. so if you want to try
out new features in charts and new components like Advanced data
grid you can switch to 3.0.0 sdk and use same flex 2 charting key
to remove watermark from charts.

How to make link between xcelsius components with sap data using Web servic

Hi all,
I have a doubt regarding connection between Xcelsius components and SAP data.
I created one Web service using Function module and made a connection between xcelsius and that web service using binding URL. It shows imput and output parameters perfectly.
But I cant get any idea as to how to connect Xcelsius components with these parameters.
Can anybody help me out..
please its urgent.
Thanks,
Simadri

Have you bound your output parameters to ranges of cells? Select the item, then click the icon to the right of the Insert In: box and select the cells.
Add a spreadsheet component to your chart and bind it to the cells, then preview the model. Do you see the data coming through?
If you do, then you can click File > Snapshot > Export Excel Data. Then close Preview mode, and import data from spreadsheet and select the sheet you just exported. This gives you real data to work with when designing the dashboard.
Hope that helps.

How to use Flex Components with Flash?

Hi!!
I found a lot of very useful components in the web, but they are all for Flex, is it possible to use Flex Components with Flash IDE?
Thanks !!!
jenry
PS: this is one of the components I need to use (a tree with checkbox nodes)
http://www.sephiroth.it/file_detail.php?pageNum_comments=30&id=151
another one:
http://www.darronschall.com/weblog/2006/09/a-flex-2-checked-tree-control-component.cfm

Flex components are delivered as SWCs just like Flash components, but the
SWC format is incompatible with the Flash IDE.
Also, the default fl.. components in the Flash IDE are incompatible with
Flex components.
You should be able to load a Flex SWF into a Flash SWF as long as you aren't
using fl.. components in the Flash SWF. If the Flex SWF overlays things
in your Flash SWF then it might block interaction, but otherwise it
shouldn't. I don't think the statement you quoted is true for all
configurations.
But loading a Flex SWF into a Flash SWF isn't going to help you use those
Flex components from your Flash IDE. Try Flash Builder 4 to build out the
Flex portion of your application. I haven't tried it myself, but it I think
it is supposed to have better integration with Flash.

Using BC4J Components with different App Servers

Can we use BC4J with 3rd party Application Servers (WebSphere, Weblogic, iPlanet etc)?
If so any advantages (Performance, Implementation, installation) in using these components with Oracle iAS?
Thanks
null

BC4J allows different ways of deploying your application.
1) Local Mode : where your client application and BC4J application are colocated togther and running in the same VM
2) As a EJB session bean
3) As a corba server object.
Using the Local mode deployment option you can deploy the BC4J application to any appservers (weblogic, websphere, iplanet) as long as they have standard VM and if your client application is JSP or Servlet then the appservers need a JSP or Servlet engine.
In JDeveloper 3.1 you can deploy BC4J applicaiton as EJB session bean to Oracle8i
In JDeveloper 3.2 ( which will released in next few weeks) you can deploy BC4J application as EJB session bean to Oracle8i , Oracle iAS and weblogic .
iAS comes preconfigured with BC4J runtime by default
raghu

Can I use an image of and Macbook with Apple's Logo an online graphic design portfolio?

Hello, i was wondring if i can use the image of an laptop with apples logo for an online portfolio?
or do i have to erase the logo? this image would be repetead only to say that you are viewing
a web proyect.
I would appreciate your response
thank you very much
sincerly
Maria Antonia Karam

Hi Maria, maybe these links will help you...
http://www.apple.com/legal/trademark/guidelinesfor3rdparties.html
http://www.apple.com/legal/trademark/copyright.html
http://images.apple.com/storeaffiliates/docs/OLS_Affiliate_Photo_Guide_102708.pd f

Why Adf components with box outline in visual editor

When I drag and drop components from the Component Palette to a page in the visual editor, save it and open the page again, instead of the UI component, I see the components with box outline in the design view of the visual editor.
Why is the happening, and is there a way I can make the UI components to appear.
Thanks for your help in advance.

Are you using a brand new production build? (or have you got your hands on a non-public build! ;o) sometimes this happens with interim builds... If its a public build try the following....Go into the project properties and the node JSP Tag Libs...Remove the ADF libs and then reattach them....
Don't ask me why! but that sometimes works! ;o)
Regards
Grant Ronald
Oracle Product Management

Error binding table components with database tables

Hi, when i try to bind table components with database tables y receive this error
java.lang.NullPointerException
     at com.sun.sql.rowset.CachedRowSetXImpl.initMetaData(CachedRowSetXImpl.java:861)
     at com.sun.sql.rowset.CachedRowSetXImpl.getMetaData(CachedRowSetXImpl.java:2336)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.getMetaData(CachedRowSetDataProvider.java:1317)
     at com.sun.data.provider.impl.CachedRowSetDataProvider.getFieldKeys(CachedRowSetDataProvider.java:489)
     at com.sun.rave.web.ui.component.table.TableRowGroupDesignState.resetTableColumns(TableRowGroupDesignState.java:261)
     at com.sun.rave.web.ui.component.table.TableRowGroupDesignState.setDataProviderBean(TableRowGroupDesignState.java:163)
     at com.sun.rave.web.ui.component.table.TableDesignState.setDataProviderBean(TableDesignState.java:250)
     at com.sun.rave.web.ui.component.TableDesignInfo.linkBeans(TableDesignInfo.java:162)
     at com.sun.rave.insync.models.FacesModel.linkBeans(FacesModel.java:1042)
     at com.sun.rave.designer.DndHandler.processLinks(DndHandler.java:2126)
     at com.sun.rave.designer.DndHandler.importBean(DndHandler.java:880)
     at com.sun.rave.designer.DndHandler.importItem(DndHandler.java:702)
     at com.sun.rave.designer.DndHandler.importDataDelayed(DndHandler.java:376)
     at com.sun.rave.designer.DndHandler.access$000(DndHandler.java:114)
[catch] at com.sun.rave.designer.DndHandler$1.run(DndHandler.java:298)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

There are a thing that I don't undertand. When I try to bind samples database table (Travel, for example) to table components, there are no errors. But when I try to bind table component with my remote postgresql database table, yes...the table component disappear and only a "Table" string is displayed....this error is because I use remote database?? Or because it's PostgreSQL??
Thanks.

Questions about using iMovie HD (6.0.4) with a new, as yet undecided, camcorder

Hi,
I want to keep on using iMovie HD (6.0.4) with whatever new camcorder I am getting. iMovie HD accepts mpeg-4 video so any camcorder that uses that format should work, shouldn't it? I will (probably) be bringing the video in via USB, as I don't think any new camcorders have Firewire ports anymore but I'd love to know about any that do. The plan is to find the files on the camcorder and drag and drop or otherwise transfer them into my MacBook Pro. (See my last question for the Thunderbolt/Firewire adapter problem.)
I've read that some?/all? Canon camcorders can record in both AVCHD and mpeg-4 so I'm looking into them. Any other brands I should check out? Using AVCHD looks like it will be too much trouble so I'm ruling those out, unless you have better ideas.
I've heard that Sony uses their own proprietary "wrapper" for mpeg-4 files their camcorders create. I think there is software out there, possibly for free, that will simply "re-wrap" them, not re-ecode them, so that they may be more easily used. Will Sony camcorders be a problem?
Will file sizes be a problem? I've read so much on AVCHD and other formats that maybe this doesn't apply but I've read that one hour of video can be 60 gb? I don't remember what context that was in.
Can I use mpeg-2 files? From what I have read, I don't think I can. If converting them would make them work, would it take a long time to do that and would file sizes be huge?
I have been using a 21 year old Sony DCR-TRV 9 mini DV cam. This past weekend the LCD screen died. I can still use the viewfinder but that's going to be challenging, so I am shopping for an inexpensive new camcorder. Less than $500, somewhere in the $100-$300 range is preferred but no toys.... HD seems to be out of reach with most starting around $500 but if you recommend any under $500, I'd love to know about them. SD should be fine otherwise. I prefer some sort of card for storage storage rather than a DVD or hard drive. The more popular format, the better.
Any advice is welcome. I do want to stay with iMovie HD though. I have tried iMovie 11 and don't like it. HD suits me fine.
One last question: Since my MacBook Pro doesn't have a Firewire port, I have found it simpler to use my old Powerbook that does. I then transfer the files over to the MacBook Pro to edit them. I have tried using a Thunderbolt/Firewire adapter so I could use the MBP but it didn't work well with video. The question is: is there a better way to transfer the video files onto the MBP from whatever new camcorder I get than USB? Are there good Thunderbolt connectors that will work well with camcorders?
Many thanks.
Cheers,
John L

I heartily support your decision to continue to use iMovie 6! I use nothing else!
imovie 6 was originally designed to import DV video streams from tape via firewire. However, in practise it can do much more. Useful sources of information:
iMovie 6 Help:
http://manuals.info.apple.com/en/iMovie_HD_6_Getting_Started.pdf
from which this is excerpt:
iMovie HD can transfer, or import,
video in many video formats and from many different
types of camcorders, including DV camcorders (including those that support
widescreen) and high definition (HDV) camcorders. In most cases, iMovie HD can
automatically recognize and import the video you’re using, so you don’t have to pay
attention to video formats.
In this step, you will import your own video into your iMovie project. If you have a
camcorder with a FireWire connection, follow the instructions to connect your
camcorder and import the video using the capture controls in iMovie HD. If you have
another type of digital video device or have footage in a file on your computer, see the
instructions on page 13.
To import video from a camcorder:
1
Set the camcorder to VTR mode (some camcorders call this Play or VCR) and turn it on,
if necessary.
2
Connect your camcorder to your computer using a FireWire cable.
This MaciLife PDF is also good:
http://www.macilife.com/PDF/iMovie_HD_6_Chapter.pdf
There is also a video tutorial here (with links to others):
http://video.google.com/videoplay?docid=654013474999069361#
The excerpt I quoted from the Apple link is less informative than it could be. It also succesfully imports video from my Fuji FinePix S4500 (actually a digital still camera) via USB2, as well from my Sony video camera via firewire!
Can I use mpeg-2 files? From what I have read, I don't think I can. If converting them would make them work, would it take a long time to do that and would file sizes be huge?
No. mpeg2 is the final compressed standard format of a DVD (and will be created by iDVD). To use that in iMovie 6 requires you 'reverse engineer' the file back to a DV stream, with commensurate loss of quality. If you really want to do that, post back for instructions.
I have no experience with Thunderbolt so can't help you there, but hopefully Karsten will see this thread and chime in with his usual excellent advice!

How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the Ipad to the Iphone and not the other way around.

How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.

The devices are not designed for transfer of that kind. Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.

Using Designer to generate Web Applications

I'm using Designer R1.3 to generate Web applications but example in a textfield i need make a validation how ca i do this using designer without make this using schema manager to correct by hands line by line

You can certainly do this with JWS. You will have to request full access permissions to the user's machine because you will need to start the web server (& maybe DB server) from your JWS application. Do this with:
<security>
<all-permissions/>
</security>
That means you'll have to get a certificate for your server.
In terms of resources - When you start resin, seems to me that all you should need to do is include all of the jars that resin needs in the command line classpath variable. To get access to this information, this code by Masahiro Takatsuka was very useful for me:
http://forum.java.sun.com/thread.jsp?forum=38&thread=71208
We did something similar to what you are doing - we ran Apache's Xindice XML DB from the JWS client. (We have since ditched Xindice because of performance issues, but launching it worked fine from JWS)
good luck!
catherine

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

If you want to see what is in a file that is backed up by time machine then you have to restore the entire file. Having said that I have had good experience with Time Machine and individual files... if the file is there then all of it's components are almost for sure there. A way to get around this in Aperture would be to use referenced images. The images then still exist as individual files and can be backed up and restored individually. You would have to do so on a file by file basis though and your album information would still only be saved within the Aperture library.

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

MB26 ,CO27 - goods issue components with serial number?

Hi ,everyone!
I know CO27 and MB26 can do goods issue to production order very easily and quickly!
But It seems CO27 and MB26 can not work well with the component with serial number.
I aslo know MB1A and MB1B can post goods issue for component with serial number.But in MB1A and MB11 , it is very difficult to can material by material number quickly while doing more then 100 components issue to one production order.
And for authorization purpose we restrict MIGO not to use goods issue for production order.
So I want to ask how CO27 and MB26 do goods issue for the component with serial number?
Or there is another ways to goods issue component with serial number to production order easily,exclude MB1A,MB11 and MIGO?
Thanks for any reply!

Hi Vivek
We use CO27 for goods issue to production order ,just like MB1A goods issue to production order.
But in the BOM components of the production orders ,some semi finished products are with with serial numbers ,so we can not use CO27 or MB26 to issue these components with serial numbers to production orders!

Can Oracle designer 1.3.2 work with Oracle 8.0.5

Dear Sir/Miss,
I would like to know if anyone can tell me if Oracle Designer 1.3.2 can work with Oracle 8.0.5 database or not?
Thank you
Best Regards

First i installed Oracle 10g on my windows 7 home premium 64 bit .
Then i installed OBIEE 10.1.3.4 on my machine
But then there were some problems cropping up and i wasn't able to use OBIEE 10.1.3.4 with windows 7home premium 64 bit machine.
I then removed both oracle 10g and OBIEE 10.1.3.4 from my machine.
Then i installed oracle 11g 64bit and then OBIEE 10.1.3.4 . But again it dint work
Can anyone help?

Using Design Science's MathFlow components with FDK9

Similar Messages

Maybe you are looking for