Using Dimension Role

Hi Guys ,
I've created one dimension that i want to use it multiple time in one cube , so i defined two role for it (delivery branch, order branch) .
I used this dimension twice in sales cube with different role but when i want to deploy cube i got following error .
XOQ-01486: Consistent solve has two aggregation steps over dimension "DIM_BRANCH".
I Use Roalp with CubeMV storage option for my cube and dimension .
I've read in owb help that when we use Dimension Role , Oralce make seperate Dimension for Role in Olap Catalog , but when i deploy my dimension with two role , i can see only one dimension in awm .
I need your help.
thanks
Edited by: amir on Jul 14, 2012 12:01 AM

We're going to need some more details about exactly what you did because it really sounds like you're making a mistake. This extra attribute should work.
The only situation I can think of where it might not work as intended is if your new attribute is a property of the state attribute... when you slice by the state attribute, it will override the default member on the new attribute.
What are your attribute relationships in that dimension? What do you get when you run the following MDX queries?
with
member test1 as [Geography].[State].DefaultMember.UniqueName
member test2 as [Geography].[NewAttribute].DefaultMember.UniqueName
select {test1,test2} on 0
from YourCube
select {} on 0,
[Geography].[NewAttribute].[NewAttribute].Members
*[Geography].[State].[State].Members on 1
from YourCube
As for the calculated member [Geography].[State].[All].[West], you can add to that to the MDX script (the Calculations tab in the cube designer) and it will be available to all sessions.http://artisconsulting.com/Blog/GregGalloway

Similar Messages

Is it possible to create dimension roles in AWM?

Hi,
Is it possible to create dimension roles in AWM like the way we have in OWB ?
If yes, please direct on the way to do this.
Many thanks in advance for your kind inputs.
Piyush

I think what you need is to use the ALIAS option that is part of the DEFINE DIMENSION statement
DEFINE DIMENSION ALIASOF
The DEFINE DIMENSION ALIASOF command defines a dimension alias for a simple dimension. An alias dimension has the same type and values as its base dimension. Typically, you define an alias dimension when you want to dimension a variable by the same dimension twice.
Additionally, You can use a LIMIT statement to limit alias dimensions and define variables and relations using an alias dimension. However, you cannot maintain an alias dimension directly; instead you maintain its base dimension using MAINTAIN.
Syntax
DEFINE name DIMENSION ALIASOF dimension [TEMP] [AW workspace] [SESSION]
Arguments
name
The name of the object you are defining. For general information about this argument, see the main entry for the DEFINE command.
DIMENSION ALIASOF
If you look at this example if provides a great example of how to use this feature:
http://download.oracle.com/docs/cd/B19306_01/olap.102/b14346/dml_x_decimal006.htm#ABC1485326
But of course the main issue here is how to generate the standard form metadata required to support this feature and make the dimension alias avaliable and visible within AWM. That is the difficult (and I would say impossible) part of the process since this feature is not supported by the AW XML API (at least I don't think it is, you could check the API docs to see if this is supported). if it is not supported then the management of this feature would all have to be controlled via OLAP DML commands (load dimension members etc) but you would still not be able to include it within a cube definition and then maintain that cube using AW XML API.
Does that help?
Keith

Logical column - Fact measure using Dimension value

Hello all, I have a Fact table that has a metric (Value) where I have set the Aggregation rule to Sum. Now I'd like to create a metric based on the value of a Product Dimension that joins to this Fact table. So I create logical column that has the syntax - Case When Product_Desc = 'A' then Value else 0 End.
The issue is in Answers when I bring this new metric in it doesn't bring in the correct value, are there steps I am missing with creating this metric?
My assumption is if I just bring that new metric in by itself it would return one record - A sum of the Value where the Product = 'A'.
Thank you

Hi BRizzle,
In your scenario, you creatre a calculated measure using the employee dimension, and then this measure show "#VALUE" on the pivot table, right? It seems that it's a limitation of using calculated measures in SQL Server Analysis. Calculated measures cannot
be secured using Dimension Security in a straight forward manner, in fact they won't be listed at all in the Dimension tab of the role where we define the Dimension security. When such measures are browsed in client tools like Excel, the value that would be
displayed is an error value like #VALUE. For the detail information about it, please see:
Limitations / Disadvantages of using Calculated Measures / Calculated Members in SSAS
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

To run OHS at port 80 using solaris role based access control

Hi.
I already know & have done setuid root to ohs/bin/.apachectl to allow ohs to listen to port 80. Now on a new OFM 11.1.1.4 install, I want to use Solaris Role Based Access Control (RBAC) instead. Is it possible? RBAC does work as I can run a home built apache2 httpd at port 80 withOUT suid root.
On Solaris 10, I enabled oracle uid to run process below port 1024 using RBAC
/etc/user_attr:
oracle::::type=normal;defaultpriv=basic,net_privaddr
Change OHS httpd.conf Listen from port 8888 to port 80.
However, opmnctl startproc process-type=OHS
failed as below with nothing showing in the diag logs:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=truffle:6701
0 of 1 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=187636255,pid=25563)
failed to start a managed process after the maximum retry limit
Thx,
Ken

Just to add my two cents here.
The commando used on Solaris to assign the right privilege to bind TCP ports < 1024 is:
# usermod -K defaultpriv=basic,*net_privaddr* <your_user_name>
Restart the opmnctl daemond.
After that OHS/Apache user can bind to lower TCP ports.
Regards.
Edited by: Tuelho on Oct 9, 2012 6:05 AM

Error in WEBI report and MDXTEST when using Dimensions in Prompt

Hi,
I am using BOXIR3.1 SP2, SAPBI 7.0
I m creating a webI report (Universe is on SAP BI Query.) which include following objcets in Query section of WebI pannel:
Business partner, Account Class, Total Arreas count.
The Condition pane of Webi Includes Prompt on object "Account Class".
When I run a report, I get List of values for Dimension Account Class, when I select one of available value eg: Commercial Customer,I get Following Error.
A database error occured. The database error text is: The MDX query SELECT { [Measures].[4EITIDWAFWLLZD2ONIAVCKD56] } ON COLUMNS , NON EMPTY CROSSJOIN( [Z_BPATNER].[LEVEL01].MEMBERS, { [Z_FCACTBP__0UCACC_CLAS].[Commercial Customers] } ) ON ROWS FROM [ZFC_M07/Z_FC_M07_Q002] failed to execute with the error Value Commercial Customers for characteristic Z_FCACTBP__0UCACC_CLAS unknown. (WIS 10901)
I tried running same query in MDXTEST editor of BI. I got same error!!!
Then I tried changing the MDX Query as:
SELECT { [Measures].[4EITIDWAFWLLZD2ONIAVCKD56] }
ON COLUMNS , NON EMPTY CROSSJOIN( [Z_BPATNER].[LEVEL01].MEMBERS, { [Z_FCACTBP__0UCACC_CLAS].[COM] } ) ON ROWS
FROM [ZFC_M07/Z_FC_M07_Q002]
Then it worked Fine!!! If you observe the change is in the value of Prompt Account Class [Z_FCACTBP__0UCACC_CLAS].[COM]
By default Dimension object in Universe shows text value, but when I changed the MDXQuery with Key value (This is one of the value of value is for [Z_FCACTBP__0UCACC_CLAS].[Level01] object in mDX test Editor.) It works fine.
I wonder How do i solve this problem!! List of values available in dimension cannot be changed at universe level.
Please let me know if any solution for this exists.
regads,
Nisha.

Hi Ingo,
I am creating the prompt on the dimension "Account Class" at WebI level.
The Technical name of this object is: [Z_FCACTBP__0UCACC_CLAS].[LEVEL01]
Also,
I confirmed that Index Awareness is applied on this dimension as [Z_FCACTBP__0UCACC_CLAS].[LEVEL01].[TECH_NAME].
This Dimension has detail object called "Account Class (Key) "and "Account Class (Medium name)".
MDXtest editor in SAP, shows me text as well as [ Level01] values:
Eg: Account Class InfoObject has values "Commercial Customer " (This is text value)and "[Z_FCACTBP__0UCACC_CLAS].[COM]".
COM Refers to Commercial Customer .
So In WebI when I use Dimension "Account Class" as prompt, I get Text value of this InfoObject which is "Commercial Customer ".
and MDXQuery Fails. But when I modify this query in mDXTEST Editor with value as "[Z_FCACTBP__0UCACC_CLAS].[COM]", It work fine.
I donu2019t understand the reason, since this problem is with almost 90% of Dimension object.
When I delete this object from universe, and refresh the universe then webI works fine.
But, if for some reason I refresh the universe again, the Dimension object as a prompt doesnu2019t work!!!
This error occurs every time I refresh the universe.
We are in UAT phase and soon to go Live!! We cannot afford to delete the object every time I refresh the universe.
Please let me know your inputs.
regards,
Nisha.
Edited by: Nisha Makhija on Oct 15, 2009 4:56 PM

Execution of a planning function with the used dimension values in a crosstab

Hello,
would like to execute planning functions within Design Studio but I don't really know how I combine this execution with the used dimension values in a crosstab for the .
Here the requirement:
3 Planning functions which should use the same filter (all values of all dimensions in the crosstab) and which should run one after another:
// open data slice
PF_1.execute();
// generate combinitions
PF_2.execute();
// close data slice
PF_3.execute();
Many thanks in advance.
Kind regards,
Tobias

Hi Arun,
in general it is not possible to nest planning functions. The inner function would update the data in the plan buffer without the outer function knowing about it. Also the inner function might be on a different aggregation level which would make things very tricky.
Alternatively you can include ABAP logic into a FOX formula:
http://help.sap.com/saphelp_nw70/helpdata/en/47/94eb78b6394befe10000000a42189d/frameset.htm
Or just create the complete logic in one ABAP planning function type.
Regards,
Marc
SAP NetWeaver RIG

Using Dimension Formulas to sum data based on different criteria

Hi all,
I am trying to use a u201CDimension Formulau201D to perform the following calculation:
We have an account dimension which has 2 important properties:
1.     CRITERIUMTYPE: This property can have 3 different values: u201CWERKu201D, u201CINVu201D OR u201CLIQu201D
2.     ACCTYPE: This property can have 2 different values: u201CEXPu201D or u201CINCu201D
The client wants to have a report that sums data based on these 2 properties. An example will help to clarify this:
ACCOUNTS     CRITERIUMTYPE     ACCTYPE     VALUE
ACCOUNT A         WERK                          EXP               100 u20AC
ACCOUNT B         WERK                          INC               150 u20AC
ACCOUNT C         WERK                          EXP               200 u20AC
ACCOUNT D         WERK                          INC               300 u20AC
ACCOUNT E         INV                          EXP               50 u20AC
ACCOUNT F         INV                          INC               100 u20AC
ACCOUNT G         INV                          EXP               200 u20AC
ACCOUNT H         INV                          INC               500 u20AC
The clients wishes to see this data in the following way:
CRITERIUMTYPE     ACCTYPE     VALUE
   WERK                         EXP              300 u20AC
                                    INC              450 u20AC
   INV                         EXP              250 u20AC
                                 INC              600 u20AC
In order to achieve this I have created several new accounts, one for each combination e.g.: Account WERKEXP is used to sum the data on the combination CRITERIUMTYPE=WERK and ACCTYPE=EXP. I have created a dimension formula in my account dimension but this is where I am stuck. I have created the following formula to calculate the account WERKEXP:
IIF([BUDGETPOSITIE].CURRENTMEMBER.PROPERTIES("ACCTYPE")="EXP",IIF([BUDGETPOSITIE].CURRENTMEMBER.PROPERTIES("CRITERIUMTYPE")="WERK",[BUDGETPOSITIE].CURRENTMEMBER,0),0)
The problem with this formula is the following:
The formula will add all amounts that meet the 2 criteria mentioned in the formula, EXP and WERK, but as soon as it finds an accounts that does not match the 2 criteria it will set the account WERKEXP back to 0. I need to know if there is a way, using dimension formulas, of adding these values together without the new account being set to 0 as soon as one of the accounts it needs to check does not meet 1 of the 2 criteria.
We are working on SAP BPC 7.5 for NW with SP04
All help is very much appreciated!
Kind regards,
Stefano

Hi,
You can also use ParentHn property to have different grouping of accounts within the dimension.
So in your case rather using the member formula you can have four accounts and add them in the Parenthn property for grouping it.
1. The Solution proposed by Nilanjan is specific for a Report/IS and Performance will be good
2. My solution will be global something similar to MDX formula, but performance may be slightly lesser than using excel function.
Hope this helps,
Regards,
G.Vijaya Kumar

How to Use Dimension Operator

Hi
I'm trying to implement SCD Type 2. I have done so using conventional methods.
I have read in some blogs that dimension operator can be used for SCD. Can any one provide me material on how to use Dimension Operator. I tried OWB User guide. But its not useful.
I have seen that we need to create levels. But i dont need levels.
Can somebody please tell me how to use it.
Regards
Vibhuti

Hi Vibhuti,
using dimensions with OWB 10g R2 isn't that difficult. You just create a number of attributes like an ID, a business key and probably a description and then associate each of the attributes with a level. You need at least one level that all the attributes are associated to. Then you can use the slowly changing dimension wizard (SCD) to track changes. In the SCD settings you can determin for which attribute you want to trigger history and which attributes contain your effective date and your end date (if you want to use SCD type II). Obviously you would need two additional attributes in every level for that purpose.
Regards,
Jörg

When to use "my role" and "partner role" in BPEL?

I'm a bit confused when to set/use partner role and my role.
Can anyone shed a little light,
regards, Henrik

Saurabh,
> I humbly disagree with your explanation of inputs
No need to be humble, you can boldy disagree. :)
You're right that I did technically use the wrong term in that sentence of my explanation. I updated the post and corrected it. However the gist of what I was saying is still true.
There are two invocation types. People use different terms but here I'll call them request-response and one-way. A request-response invocation type is used for what we typically think of as a "synchronous" process. That is, the service consumer is blocked until the service responds. It's like methodA() in Java calling methodB(). methodA() is blocked until methodB() completes. (In fact, this is exactly what it's like since all invocations on our BPEL engine ultimately go through our Java API.)
In the case of one-way, the service consumer is not blocked. This is often referred to as fire-and-forget. It simply sends its request, then it is free to continue or do whatever it wants. Moreover, nothing is returned to the client (you fired-and-forgot, remember). Typical "asynchronous" BPEL processes uses this invocation type.
So we have those two invocation types. Yet the problem before us how to have an asynchronous process return a result. You can't use request-response because the service consumer is blocked until the process finishes. You can't just use a one-way because nothing is returned to the caller. What to do?
The way the BPEL standard solved the problem is to use two one-way invocation types. The first one is to invoke the process. The second one is a one-way from the BPEL process to the service consumer to return the result. There are some glaring implications of this:
1. When the BPEL process returns it's result, things have now switched: The BPEL process becomes the service consumer, and the (original) service consumer becomes the service.
2. The service consumer has to be able to listen for one-way invocation type requests.
3. The BPEL process has to know how and where to call the service consumer back. This information is passed in the original request. As well as containing the data payload, it contains a callback address and unique identifier. This, in essence, is what the WS-Addressing standard is about.
Now the definition of a one-way invocation type in a WSDL is:
    <portType name="aaa">
        <operation name="bbb">
            <input message="tns:ccc"/>
        </operation>
    </portType>Compare that to a request-response invocation type:
    <portType name="aaa">
        <operation name="bbb">
            <input message="tns:ccc"/>
            <output message="tns:ddd"/>
        </operation>
    </portType>Let's look again out our example WSDL:
    <portType name="SelectService">
        <operation name="processRequestQuote">
            <input message="tns:RequestQuote_processRequestQuote"/>
        </operation>
    </portType>
    <portType name="SelectServiceCallback">
        <operation name="processRequestQuoteResponse">
            <input message="tns:RequestQuote_processRequestQuoteResponse"/>
        </operation>
    </portType>Here comes the good bit... Both portTypes have an <input> operation. But that's because they are both one-way invocation types, and there is no choice but use the <input> element -- that's the standard. You can't imply put <output> because there's no such thing in the standard. However we know that one of those is to actually return the result. That is, it's the output, even though it's labelled <input>.
Hopefully that's given you enough information now. Re-read my first post, above, and it should make more sense.
Incidentally, this is why you rarely see try asynchronous web services, because the caller has to also be a listener. And if you want to call a service, who wants to also have to write code to listen, to handle responses coming out of order, etc. This is one of the advantages of using an orchestration engine like Oracle BPEL Process Manager. The framework takes care of the hard work, and you can simply call an aysnchronous service and not have to worry about how to get the response back -- the engine does it for you.
Regards,
Robin.

Using dimension type u2018Subtableu2019 in BPC

Does anyone know about using dimension type u2018subtableu2019? Has anyone ever used it?
Thanks in advance
Nitin

The sort answer is - No - you need not use it if you don't want to.
In the application, the normal transactions would have some u2018catch allu2019 dimension member such as u2018noaccountu2019 assigned to them for this subtable dimension. You donu2019t have to use this subtable dimension since the same can be achieved by using other regular dimensions as well. However if you are not using the stored procedure, you can write SQL logic to accomplish the same. Alwyn Berkhout has given a good example of one such SQL code in an earlier thread in this forum. It is as follows:
*SELECT(%OPENINGACCOUNTS%,"ID",ACCOUNT,OPENINGACCOUNT_PROPERTY'')
*XDIM_MEMBERSET TIME = 2006.DEC
*XDIM_MEMBERSET SUBTABLES = F_CLO
*XDIM_MEMBERSET ACCOUNT = %OPENINGACCOUNTS%
*WHEN SUBTABLES
*IS "F_CLO"
*WHEN ACCOUNT
*IS %OPENINGACCOUNTS%
*REC(FACTOR=1,TIME="2006.JAN",SUBTABLES="F_OPE"
*ENDWHEN
*ENDWHEN
*COMMIT
You can read more about this at Carry forward opening balances
Regards
Pravin

Using dimension properties in LOOKUP

Hi,
I'm trying to use dimension properties in a LOOKUP, but when I execute the script the log tells me that COMPANY, SALESORG, PRODUCT and TRANSCURRENCY is not defined and therefore create a lookup on all members.
THe usage of properties in LOOKUP is described in the documentation, but somehow it doesn't seem to work for me. Can anyone help me?
*LOOKUP ACTIVITYPLAN
*DIM FCIC:ACCOUNT= "FULLCOST"
*DIM FCIC:PARTNER="I_NONE"
*DIM FCIC:COMPANY=PARTNER.ENTITY
*DIM FCIC:SALESORG=PARTNER.ENTITY
*DIM FCIC:PRODUCT=PRODUCT.PRODREF
*DIM FCIC:TRANSCURRENCY=PARTNER.CURRENCY
*DIM COUNTRY = "CO_NONE"
*DIM DATASOURCE = "INPUT"
*DIM PROFITCENTER = "YB99"
*DIM RPTCURRENCY = "LC"
*ENDLOOKUP
Regards,
Lars
Edited by: Lars Johansen on Nov 4, 2011 10:41 AM
Edited by: Lars Johansen on Nov 4, 2011 10:41 AM

Hi Gersh,
I'm getting closer. I have now tried to use the FOR/NEXT logic on 1 property and it works. I know want to include another. In this case it seems as if the LOOKUP works fine, but the WHEN/REC/ENDWHEN is not. It doesn't recognize my LOOKUP(%LOOP_CU%%LOOP_CO%).
Any suggestions have to solve this problem?
*LOOKUP ACTIVITYPLAN
*FOR %LOOP_CO% = %P_COMP%
    *FOR %LOOP_CU% = %P_CURR%
        *DIM %LOOP_CU%%LOOP_CO%:TRANSCURRENCY=%LOOP_CU%
        *DIM %LOOP_CU%%LOOP_CO%:ACCOUNT= "FULLCOST"
        *DIM %LOOP_CU%%LOOP_CO%:PARTNER="I_NONE"
        *DIM %LOOP_CU%%LOOP_CO%:COMPANY=%LOOP_CO%
        *DIM %LOOP_CU%%LOOP_CO%:SALESORG=%LOOP_CO%
        *DIM %LOOP_CU%%LOOP_CO%:PRODUCT=PRODUCT.PRODREF
    *NEXT
*NEXT
*ENDLOOKUP
*WHEN ACCOUNT
   *IS "QPURC"
               *FOR %LOOP_CU%=%P_CURR%
                   *REC(EXPRESSION=(%VALUE%*LOOKUP(%LOOP_CU%%LOOP_CO%)),ACCOUNT="529996")
                   *END
               *NEXT
*ENDWHEN

Use dimension in HSF freeform calculation

Hi everybody,
I want to use dimension structure in Oracle Hyperion Strategic Finance Application.
I assigned a user defined dimension, to an account. Then, I used a different dimension for any other account. e.g: v300.00.001/A1 - v300.00.002/B1
Now, I want to create a freeform calculation for an account that names as v300.00.002/B1. My formula is; v300.00.002/B1= @DIM(v300.00.001, "A1")
But this fomula, send error "HSF14359: The formula for v300.00.001/A1 requires v300.00.002/B1 which does not exist in this file.
How can I solve this problem? Can I use freeform calculation with dimensional structure in HSF?
Thanks.

It's extremely annoying that the FLD() command isn't yet availlable in NW, unless it's coming with 7.5 or has been included in one of the more recent support packs.
As a an alternative you may be able to use the following MDX routine:
Returns the value of a property of the current member of a dimension
*function PRO(%DIMENSIONNAME%,%PROPERTYNAME%)
%DIMENSIONNAME%.Properties("%PROPERTYNAME%")
*endfunction
Unfortunately I've never been able to use this with a When statement, so you may have to ask an ABAP resource to develop a BADI to achieve your required results.

Anyone using Dimensions versioning? My dm-mapping.xml is missing.

I believe this may be related to my question 9254748 (Crash when using Dimensions version plug-in - key Failed to {0} file {1}
Oracle JDeveloper 11.1.1.3.0 (JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660)
Versioning Support (for Dimensions) 11.1.1.3.37.56.60
I've tried this on two different environments with 2 different Dimensions servers and have gotten the same behavior, so I'm assuming I'm missing a step others may have done successfully.
After debugging, it appears that JDeveloper is attempting to access a file called dm-mappings.xml located at:
C:\Documents and Settings\<user>\Application Data\JDeveloper\system11.1.1.3.37.56.60\o.jdeveloper.dimensions
I have no such file. The files in this location are:
- dm-connections.xml
- preferences.xml
- vcs.log
- vcs.log.lck
I'm assuming based on other Dimensions-related posts that other people can use JDeveloper with Dimensions. Can anyone shed light on how this file gets created, or post a copy of your file so that I can attempt to get around this issue?
Thanks

Hello
This file is created when a folder or project is downloaded from the Dimensions Server using JDeveloper. If you create a dimensions connection and then using the versioning navigator (View -> Team -> Version Navigator) open the connection and navigate to the folder you want to work on. Select the folder and use the context menu "Download" to download the folder.
Dave

When we r using zslsoff_all role , we r getting error: No Authorization

HI!
We have 10 sales office . each sales office having each role. For Ex: Sales office Is X, Y, Z . Then Roles r Zslsoff_X, Zslsoff_y, etc. Apart from this we have role for all sales office like zslsoff_all. When we r using zslsoff_all role , we r getting following error: U dont have a authorization to read Zslsoff.
If we r using Zslsoff_X, Zslsoff_y, etc we r getting correct one.
I check both roles (zslsoff_all and Zslsoff_X) in Pfcg . both r same.
Plz help me. I will assign points

Hi,
post your query in security forum.
use this link: Security
any way run tcode SU53 after authorization error to identify missing authorization for object.
regards,
kaushal

Query Result Filtered using User Roles SCSM 2012 R2 RU2

Hi,
I have a Query Result setup in a Request Offering that shows the list of Printers using the Printer CI. We have different sites with printers that start with the site location like MTL. There are no filters in the Query Result. What i did is create a Group
for each site that has the rule "start with" MTL (other groups have other 3 letter prefix). Then i created a user role for each group and only selected the Printer group for the site and i associated the User Role with our AD Site group called MTL-User.
i did this for each site. Now when i checked the Request Offering at first, with a user that is part of MTL-User group, it showed only the list of printers that started with MTL. Now today i came to check again and the same user is seeing all the printers
and not just the ones that start with MTL.
The User Role i made was based on the Read-Only Operator. I just dont know what the problem is

Thanks for that link. I had thought of something like that but i found it came to the same thing as just using the filter field that is already available when using a Query Result. I retried using User Roles and figured out that the problem is that my test
user is only part of the MTL-USER group so when i logged in with him into the portal (cireson Portal btw) i would see the proper result. If i logged in with a actual user that is also part of other groups besides MTL-Users, they see all the printers no matter
which AD group i define in the User Role.
So what i figured was that my group is not getting applied as the filter to the query Result and that the Member section in the User role is only to say who can see the Query result list. But then i have my test user for which this setup works...so im confused
on what exactly is overriding the results.

Using Dimension Role

Similar Messages

Maybe you are looking for