Using Epson Perfection 2480 with Tiger and USB 2.0 Macs

Actually I couldn't reply to an older post, since it was archived:
http://discussions.apple.com/thread.jspa?threadID=959762
So I tought to simply drop some info here about a few findings I had in the last few minutes.
Downloading and installing driver version 2.65 cured this (avoid the newer 2.77 driver; Epson says 2.65 is for OS9, but I have it here running on a Intel Mac). This will install the Epson Monitor software. Now that's a first trick: make sure all accounts in the computer have that on the login items for that account, that has to start as soon as the computer starts. Install the older Epson software even if you plan to use your scanner with Vuescan or Image Capture, for example.
After that, I still had the same problem here, but it was only on the machine with USB 2.0.
Switching the scanner to the keyboard USB plug (1.1) solved the problem. Maybe an older hub could do the trick if you have, let's say, a wireless keyboard.
Good luck,
Gui
Message was edited by: GuilhermeM

Great info/tip(s), thanks!

Similar Messages

Can't print to CD using Epson Print CD with iMac and Mavricks

I just got a new iMac to replace my older MacBook.
Both systems have the latest version of Mavericks 10.9.5. and the latest Epson printer driver for my Artisan 730. On the iMac when I try to print to a CD using Epson Print CD I am unable to select the media type like I can on the MacBook. On the iMac the selection is grayed out and I cannot select anything from it. See screen shot below.
On the MacBook for Media Type I can select CD but on the iMac as you can see is grayed out. I can't figure out why. I have looked at the Epson support pages and I found no help there. So I am trying here to see if someone can help me out.
Why can't I select a media type?

Welcome to Apple Discussions!
I might as well tell you now, but it has been found that CDs last longer that are not printed or labeled on. And drives are able to better handle disks with no labels. Use jewelcases with inserts to keep track of what's on a CD or DVD. It is not a direct answer to your question, but I have a CD printing printer, the Epson R220, and I won't use the CD labeler. Here's an interesting report on this:
http://www.macintouch.com/cdrfailure.html
If you must do it, and you don't care about the longevity of your disks, make sure that the tray's rear entrance is not blocked. People who have put Epson Photo R220's against walls have had the same error you are getting.

Using Epson DX6000 printer with leopard and timecapsule

I can print fine when i plug in the printer direct to the macbook, but not when connecting the printer direct to the timecapsule. Macbook sees it ok, and says it's printed to it but nothing happens. Tried reinstalling drivers' deleting preferences etc but no good. And like i said works fine when connected directly.
Can anyone please advise?

That was my experience as well - the key was getting rid of the old driver.
Finally figured it out after spending literally days on this problem.
Read this post first:
http://discussions.apple.com/thread.jspa?messageID=5862672
The key for me was to totally get rid of the old epson driver. I had the Epson Stylus Photo R2400 - GutenPrint v5.1.3 driver. It produced horrible washed out results. Photoshop could see the printer, and actually printed images, but they looked washed out. After replacing all the inks, and running numerous test prints - after switching it to my windows machine and back, I finally got it working. Follow the instructions on the post listed above. The part where they have you "repair permissions" did not complete for me. Something happened and the process just aborted. Why that happened I do not know. Once the old drivers were off, I went into system preferences/print & fax. I plugged the printer back in. I added it with the newly downloaded and installed driver from Epson. When I could select which driver to use I DID NOT USE the GutenPrint driver. This time I was prompted to use an Epson SP R2400 driver. I printed a test page - all looked ok. I fired up Photoshop, and voila - my gorgeous prints on my fantastic Epson R2400 are back. Man I was a real unhappy camper for the past 7 days. So I am back in business.
Good luck - hope it helps.

Help using Epson Perfection 1670 with Photoshop CS4, Mac OS 10.6.2

I have downloaded and installed the driver from epson.com and I have also copied the twain plug in (from the install CD) into the import-export folder. I have restarted my computer and I am not able to scan. I do not see my scanner through Photoshop. I hope somebody can help me.

Well a lot of people myself included use stand alone scanning software to do my scanning. I use VueScan software. You may want to have a look at it. Hope this helps you
This is the address for the VueScan software.
http://www.hamrick.com/index.html

HT4060 Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port?

Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port? Or do I need to purchase one of those cigarette lighter charging devices? Thanks!

You'd have to read your car manual but chances are it won't put out enough power for the iPad. The car is likely set up to charge a phone, most of which typically want half the power an iPad wants.
I think your options are to get a cigarette lighter looking charger, making sure it's powerful enough for an iPad...or you can get power inverters for about $25, where they plug into the cigarette lighter/power point and have a normal household type outlet on the other end. Then you'd just plug your charger in like you would at home.
Another option would be to look for something like a Zagg Sparq, which is a battery operated charger...plug the Sparq into the outlet at home. Its battery holds a charge and you can use that to charge your device. (zagg isn't the only manufacturer of such a device, Targus has one as well). Just look for portable chargers.
The key to remember is to make sure it's rated for an iPad, which will want more power than a cell phone.

Epson Perfection 2480 photo scanner

Just got a new iMac running Snow Leopard. I have a problem getting my scanner to work, Scanner is a Epson Perfection 2480 Photo. I have down loaded the latest driver from Epson. If I try to run the scanner from finder I get the following message.
The application “Epson Scan” could not be launched because of a sheared library error: “<EPSON Scan> < EPSON Scan> < TWAIN Source Manager.Shlb> ”
The scanner will not work in any applications giving error messages when trying to find it.
However in system Preferences you find the scanner in Printer & Fax and if you open it from there you can scan to the Desktop, Documents Folder etc.
Will scan from Image Capture
I have spoken to Epson and Apple
I think the problem must be the “shared library error” But having spent the best part of 2 days on the phone to various people I am no further forward.
Epson say is a Apple problem
Apple say is a Epson problem
Any help would be appreciated

I have looked at this again.If you go applications, epson scan, more info it shows application as powerPc version 2.73 try to run it from applications and you get sheared library error as detailed in previous post.
Go to joe, library. printers and there is a 2480/2580 scanner, more info on that shows application universal version 6.4 and allows you to select 32bit and to open using rosetta this will open and scan.
When you run from system preferences this is what is opening not the version 2.77 downloaded from epson. Is this where the shared library error is and if so how do I solve it, have tried deleting v2.77 but scanner still will not run in Word etc. tried deleting v6.4 still no go.
Also if you go Mac HD,library,image capture,twaine data sources the epson v2.77 appears and not v6.4 in there but in devices there is epson scanner app. version5.2.5. Getting nowhere fast

I plan to purchase a Mac mini and then a new iPad. Can I use the iPad as a monitor and keyboard for the Mac mini, either through the USB connection or thru Wi-Fi?

I plan to purchase a Mac mini and then a new iPad. Can I use the iPad as a keyboard and screen for the Mac mini, using either the USB connector or Wi-Fi?

I'm sorry, I should have said thru Bluetooth, not Wi-Fi. I want to use the mini as a base station and the iPad like a laptop that I can sync when I'm home and carry with me when I travel. Is is possible to hook these 2 up - iPad/mini, through Bluetooth? I understand I need to use a regular monitor/keyboard/mouse on the initial install.

Droplet Script used to work fine in Tiger and Leopard, now doesn't

Hey everyone,
I'd like to apologize in advance, I'm not really good with AppleScript and was only able to create my droplet in the first place by changing little bits of a Droplet example script I found on the internet (I forgot where I found it, but it might even have been here at Apple).
The script worked perfectly fine in Tiger and Leopard but throws an error in Snow Leopard. The error says "Can't make alias "...filepath... "into type file."
The problem is that I can't find the problem in my script. I don't get any indication which line it may be and I hope someone here will be able to help me.
I also tried Script Debugger, but the script works there! So that doesn't help either...
I'd appreciate any help, here is the script:
-- QuickTime supported image formats
property type_list : {"JPEG", "TIFF", "PNGf", "8BPS", "BMPf", "GIFf", "PDF ", "PICT"}
property extension_list : {"jpg", "jpeg", "tif", "tiff", "png", "psd", "bmp", "gif", "jp2", "pdf", "pict", "pct", "sgi", "tga"}
property typeIDs_list : {"public.jpeg", "public.tiff", "public.png", "com.adobe.photoshop-image", "com.microsoft.bmp", "com.compuserve.gif", "public.jpeg-2000", "com.adobe.pdf", "com.apple.pict", "com.sgi.sgi-image", "com.truevision.tga-image"}
-- This droplet processes files dropped onto the applet
on open these_items
repeat with i from 1 to the count of these_items
set this_item to item i of these_items
set the item_info to info for this_item
try
set this_extension to the name extension of item_info
on error
set this_extension to ""
end try
try
set this_filetype to the file type of item_info
on error
set this_filetype to ""
end try
try
set this_typeID to the type identifier of item_info
on error
set this_typeID to ""
end try
if (folder of the item_info is false) and (alias of the item_info is false) and ((this_filetype is in the type_list) or (this_extension is in the extension_list) or (this_typeID is in typeIDs_list)) then
processitem(thisitem)
end if
end repeat
end open
-- this sub-routine processes files
on processitem(thisfile)
-- NOTE that the variable this_item is a file reference in alias format
-- FILE PROCESSING STATEMENTS GOES HERE
tell application "Image Events"
launch
-- get the parent folder of the image file
set the parent_folder to the container of this_file
-- derive new name for the new image file
set the new_name to my addextension(thisfile, "png")
-- look for an existing file
if (exists file new_name of the parent_folder) then
error "A file named \"" & new_name & "\" already exists."
end if
-- open the image file
set this_image to open this_file
-- save in new file. The result is a file ref to the new file
set the new_image to save this_image as PNG in file new_name of the parent_folder with icon
-- purge the open image data
close this_image
end tell
end process_item
on addextension(thisfile, new_extension)
set this_info to the info for this_file
set this_name to the name of this_info
set this_extension to the name extension of this_info
if this_extension is missing value then
set the default_name to this_name
else
set the default_name to text 1 thru -((length of this_extension) + 2) of this_name
end if
return (the default_name & "." & the new_extension)
end add_extension

Here's the faulty line:
--open the image file
*set this_image to open this_file*
The command open doesn't return anything that could be assigned to the variable this_image.
I also wonder if it wouldn't be better to add “as alias” at the end of each of the following two lines:
*set this_info to the info for this_file*
*set the item_info to info for this_item*
I hope this help.

Even after doing the recovery of my iphone 4, still i am getting a picture with itunes and usb port in phone. showing only the emergency call

I did a recovery of my iphone4. After extracting, recovery and verifying completing, my iphone restarted. But still i can only see the picture with iTunes and USB port in the iphone 4. Only the emergency call is allowed.
After recovery and re-start of my iphone4 the itunes doesn't detect my phone. What should i do now

DFU Mode and restore again, if it doesn't work, well then...I suggest you try using a custom firmware maker (sn0wbreeze), NOT for the jailbreak, just to try and fix your phone.

I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook. ICloud syncs to my iphone fine both ways.

I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar. They have stopped syncing...mostly.
Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine. But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar. If I reboot the computer, the iCloud data shows up.
Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
All syncing works with my iPhone.
I have signed out of iCloud on PC. I have stopped syncing and re-started. No change.
I have an .aplzod folder for iCloud. I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
Any help would be appreciated. Curious that Outlook will upload to iCloud but not receive downloads unless I reboot. However, rebooting does not download the missing Contacts.
Jim Robbins

Hi Jim!
You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
Completely close and reopen the iCloud Control Panel.
If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the Windows Control Panel:
In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
Open Outlook and test to see if the issue has been resolved.
Ensure the iCloud Outlook Add-in is active within Outlook.
Outlook 2010:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thanks for using the Apple Support Communities!
Cheers,
Braden

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

What?
You want to control iTunes on your computer using the Remote app on your iPad?
And you want to connect the iPad and computer through your Nokia?
No, this will not work.
Just create a network with your notebook.

How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

Because you can only synce with one iTunes library and you are switching libries by using the new computer. To nake this yyour syncing computer:
- Move all the media(apps, music, synced video and photos etc) to the new computer.
- Connect the iPofd yo the computer and bake a backup fo the iPod by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the backup that iTunes makes doe not include media.
To move mdia to the new computer see:
iTunes: How to move your music to a new computer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer

Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few m

Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few months and updates ago

I tried your suggestion, not knowing that the direct pdf printer would also "save as" PDF, but when I try your suggestion and use the Adobe PDF printer that is a direct creation of the PDF from the browser (IE9), instead of the "black out" areas I get when I use the "Convert to" button, I get missing blocks of the resulting PDF, and only get the first 1/4 to 1/3 of the webpage.
Just to clarify, when I said I print the webpage and then scan, that is a work around I have to do if I need a scanned version of the way a webpage appears on a particular date and time, instead of the one step process I used to be able to do when Adobe Acrobat would actually convert the webpage to a pdf without blackout areas or, if I try your suggestion, blank spots with a partial webpage. But the idea was one I had not thought of and I appreciated the thought.
Yes, Acrobat was updated, and is updated, and was working fine until a few months ago, Win 7 and Office 32 bit versions, Office 2010

All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?

All of a sudden my personal hot spot isn't working. It only comes up with Bluetooth and USB connection options. Why would that be?

No I can not turn on the wifi either. I can get on the web on my phone and Facebook etc on phone but no wifi or hotspot

AI have an iPad and iPhone but am stuck with Tiger and Leopard. Will I stir be able to get my email on my PowerBook if I after I upgrade to iCloud? I don't have the cash to upgrade the mac right now.

I have an iPad and iPhone but am stuck with Tiger and Leopard on my old powerbook G4. Will I still be able to get my email on my PowerBook after I upgrade to iCloud? I don't have the cash to upgrade the mac right now. Just wondering what my email options are. Thank You.

You will be able to get your mail on the PowerBook. The calendars (iCal) will not sync; any events added to iPad and/or iPhone will not sync with the Mac but will sync with each other (that is: the mobile devices which are on iCloud). My MacBook Pro (Lion) and iPad2 (iOS5) sync fine; I still get my Mail on iBook G4, MacBook Pro (Snow Leopard) and iMac (Snow Leopard).
Message was edited by: kennethfromtoronto

Using Epson Perfection 2480 with Tiger and USB 2.0 Macs

Similar Messages

Maybe you are looking for