HT4060 Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port?

Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port? Or do I need to purchase one of those cigarette lighter charging devices? Thanks!

You'd have to read your car manual but chances are it won't put out enough power for the iPad. The car is likely set up to charge a phone, most of which typically want half the power an iPad wants.
I think your options are to get a cigarette lighter looking charger, making sure it's powerful enough for an iPad...or you can get power inverters for about $25, where they plug into the cigarette lighter/power point and have a normal household type outlet on the other end. Then you'd just plug your charger in like you would at home.
Another option would be to look for something like a Zagg Sparq, which is a battery operated charger...plug the Sparq into the outlet at home. Its battery holds a charge and you can use that to charge your device. (zagg isn't the only manufacturer of such a device, Targus has one as well). Just look for portable chargers.
The key to remember is to make sure it's rated for an iPad, which will want more power than a cell phone.

Similar Messages

Can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

thanks

I have iPad and I touch can I use the power cord

I have an iPad and an itouch can I use the same power cord

If you only want to use the one charger for both devices (e.g. to take on holiday) then the iPad's charger would be the best one to use as that will charge the iPad quicker, and it's safe to use with iPods and iPhones (http://support.apple.com/kb/HT4327)

Can I use the power supply from a 1.83GHz CD mini with a new 2.53GHz mini?

Because I'm too lazy to remove the old power supply, I just want to swap out my old mini for my new one.

I did this for a month, for the same reason as you. Both power supplies are are 110 watts -- although you can double-check that, if you like.
Eventually I did make the change, I guess because I didn't want to put "new wine in old skins".

Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker,

Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker, & phone only). Was this former-feature now an oversight?? I'd really appreciate having my Bluetooth once again listed as a choice of audio option. Especially considering the battery life is not what it was prior to this update, and requires recharging often.

Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....

Can I use a power cord from a Macbook air with a Macbook?

Can I use a power cord from a Macbook air with a Macbook?

No, the MacBook Air power adapter is a 45 watt. A MacBook needs at least a 60 watt power adapter although you can use a MacBook Pro 85 watt adapter. You can use a higher wattage adapter without any problems.
http://support.apple.com/kb/HT2346

Can I use the power supply of 4507R into 4507R+E?

Can I use the power supply of 4507R into 4507R+E?
I have two old 4507R with 1300W power supply，now I want to upgrade to 4507R+E，Can I use the power supply of 4507R into 4507R+E?

According to this Q&A you can:
Q. Can I use the existing Cisco Catalyst 4500 power supplies in the E-Series chassis?
A. Yes.
Link:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/prod_qas0900aecd806d8b06.html
HTH

Now that I upgraded to Maverick on my Mac air, I can not use the power button to shut down the computer anymore. any suggestions?

Now that I upgraded to Maverick on my Mac air, I can not use the power button to shut down the computer anymore. I now have to go to the apple icon in the upper left corner. Any short cuts instead of going to the apple in the top left corner and hitting shut down. Doing that all the time, I feel like I am back at work using a "Windows" computer.

This a is tricky one, but you can still do it. Instead of pressing the power button, hold it down for a few seconds and then you'll see the shut down options dialog pop up.
I guess they were trying to prevent accidental touching of that button. They did something similar with the Eject button a few versions ago, where you have to hold down Eject instead of just tapping it so that you don't pop out a CD by mistake.

My MacBook Air won't charge using the power cord and it's not the power cord that's malfunctioning. The battery is now exhausted.

My MacBook Air won't charge using the power cord and it's not the power cord that's malfunctioning. I went to Radio Shack and tried two new cords. The battery is now dead. Any thoughts?

Unfortunately, my battery has died as a result of not being able to charge with the power cord. Not sure what an SMC reset is but I have made an appointment to bring my laptop in to the Apple Store. Thank you for your response. Very much appreciated.
Warm Regards,
Carla

Can I use the instrument I/O assistant express vi to communicate with a USB connected instrument ?

Can I use the instrument I/O assistant express vi to communicate with a USB connected instrument ? My PC is running Windows 2000 et Labview7 express.
where can I get information or examples on the assistant and USB communication ?

Yes you can - the Instrument I/O Assistant communicates with message-based instruments through VISA. VISA 3.0 supports USB instruments and VISA 3.0 is the version of VISA that installs with the Assistant.

I can no longer back-delete or hit return to make a new paragraph, nor can i use the arrows to go backwards and forwards in a line; it's like the fn key is stuck; i've taken it off and cleaned it, and it looked clean.

I can no longer back-delete or hit return to make a new paragraph, nor can i use the arrows to go backwards and forwards in a line; it's like the fn key is stuck; i've taken it off and cleaned it, and it looked clean.

Then it's time for a new keyboard. If you are still under warranty, call AppleCare.
For DIY keyboard repair check out the following websites:
iFixit
YouTube “How To” tutorials.

I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.

I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.

If you have owned the device, as in purchased from Apple, less than a year then there will be no charge to repair, or most likely, replace the device. If you have had the device more than a year you will be charged an out of warranty cost for replacement ($219 I think) and that is much cheaper than a new device. If you have Applecare+ then you have an additional year of coverage and the replacement will be $49 or $79 depending on when you got the Applecare.

HT1476 After update to either iOS 7.0.3 or 7.0.4, my iPhone 4S won't charge. I'm using charger and cable that came with the phone. Nothing else changed.

I'm using charger and cable that came with the phone. Nothing else changed.
I think it was the update the iOS 7.0.4 that I did last night. I woke up this morning with my battery almost drained and the charging function going off and on every few seconds, like it would start charging then disconnect, then reconnect repeatedly.
I've tried restarting the phone and hard restarting the phone several times, but I'm getting really low on battery by now (under 20%).
I've tried cleaning the connector with a little isopropyl alcohol, and blowing it out with compressed air. Though I can't be 100% certain, it's very unlikely my connector died exactly at the same time I was updating my phone. Especially since it appears I'm not the only one with this problem.
And now, after the last hard reset, my phone doesn't even recognize the charger at all, or being connected with the USB cable to my MacBook Pro.
I turned off my phone so when I go to the Apple Store it will power up one last time, but besides that I'm out of ideas.

Just back from Genius Bar and two other people at my table had the same problem. Their 4Ss aren't charging either. One of them had a fried board according to the tech. At least my HW checked out OK. It just won't charge.
The tech tried to tell me that it was because my connector was corroded, which I told him was kind of a weak argument since evidence points to that the update has something to do with it.
They're seeing a lot of these and it looks like they already have a script.
Luckily I had enough juice left to recycle it for like $180, so I picked up a 5S with a new 2 year.
It looked to me like this is going to blow up pretty big. Like class action lawsuit big.
If you have an iPhone 4 or 4S, and you haven't updated it to iOS 7, don't for now. See if a patch comes out that doesn't brick your phone. Or get an induction charger maybe? Don't just update and expect absolutely no problems because too many people are having problems right now.

We had to change the feed adress and the epsiode adresses. Now all the episodes of my podcast are downloaded (although i have downloaded them already). How can I make the changes in my feed and avoid that all the episodes are reloaded?

Hello,
We had to change the feed adress (<itunes:new-feed-url>)and the epsiode adresses in the feed because the feed and the episode-files are on a new server. Now when i open my iTunes subscription of our podcast all the episodes of my podcast are downloaded again (although i have downloaded them already).
My Question therefore is: How can I make the changes in my feed and avoid that all the episodes are reloaded?
Maybe have an answer?
Thank you very much.

Thank you very much for your answer
As I see now, our 'guid' tags contain the episode URLs
To avoid this problem in the future i would like to change guid tags. Can you please tell me how a guid tag should look like if it is not the URL?
Thank you for helping us!
ps now it looks like this eg:
<guid isPermaLink="false">http://www.castyourart.com/podcasts/213_thinkglobal_en.mp4</guid>

Can I unload iso 6?The iso 6 0 has messed up my iPad. Can I go back to the iso that came with iPad 2

The iso 6 0 has messed up my iPad. Can I go back to the iso that came with iPad 11

Sorry, but you can't go back to a lower iOS.
 Cheers, Tom

HT4060 Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port?

Similar Messages

Maybe you are looking for