Can't print to CD using Epson Print CD with iMac and Mavricks
I just got a new iMac to replace my older MacBook.
Both systems have the latest version of Mavericks 10.9.5. and the latest Epson printer driver for my Artisan 730. On the iMac when I try to print to a CD using Epson Print CD I am unable to select the media type like I can on the MacBook. On the iMac the selection is grayed out and I cannot select anything from it. See screen shot below.
On the MacBook for Media Type I can select CD but on the iMac as you can see is grayed out. I can't figure out why. I have looked at the Epson support pages and I found no help there. So I am trying here to see if someone can help me out.
Why can't I select a media type?
Welcome to Apple Discussions!
I might as well tell you now, but it has been found that CDs last longer that are not printed or labeled on. And drives are able to better handle disks with no labels. Use jewelcases with inserts to keep track of what's on a CD or DVD. It is not a direct answer to your question, but I have a CD printing printer, the Epson R220, and I won't use the CD labeler. Here's an interesting report on this:
http://www.macintouch.com/cdrfailure.html
If you must do it, and you don't care about the longevity of your disks, make sure that the tray's rear entrance is not blocked. People who have put Epson Photo R220's against walls have had the same error you are getting.
Similar Messages
-
Using Epson Photo R260 with iMac
iMac found driver and printer works fine with it, but.....now that one of the 6 ink cartridges is low it wants me to replace it before it wil print.
The problem is that one doesn't know which cartridge is low. I go to the printer info and it has a "supply level" button but it spins and looks and says the information is not available.
How do I know which cartridge is low?
You can't see in them and to replace all 6 is about $70 and a big waste of the good ones.
Desert Pete
Thank you.Wallah
A bit more research shows that CS3 runs in 32 bit mode. The problem I had was with CS5.
You could try asking in the Adobe Photoshop Community or in fredmiranda where there are many Photoshop gurus. (both require userids which are free). -
Using Epson Perfection 2480 with Tiger and USB 2.0 Macs
Actually I couldn't reply to an older post, since it was archived:
http://discussions.apple.com/thread.jspa?threadID=959762
So I tought to simply drop some info here about a few findings I had in the last few minutes.
Downloading and installing driver version 2.65 cured this (avoid the newer 2.77 driver; Epson says 2.65 is for OS9, but I have it here running on a Intel Mac). This will install the Epson Monitor software. Now that's a first trick: make sure all accounts in the computer have that on the login items for that account, that has to start as soon as the computer starts. Install the older Epson software even if you plan to use your scanner with Vuescan or Image Capture, for example.
After that, I still had the same problem here, but it was only on the machine with USB 2.0.
Switching the scanner to the keyboard USB plug (1.1) solved the problem. Maybe an older hub could do the trick if you have, let's say, a wireless keyboard.
Good luck,
Gui
Message was edited by: GuilhermeMGreat info/tip(s), thanks!
-
Printing sapscript label using zebra printer
Hi,
Can anybody please help me regarding "printing sapscript label using zebra printer"?
i hav set the following print default settings in the transaction mb90:
output device :
NO01
device type: YZZX_ZEB
but when i try to print ,i am getting error message stating that "the respective sapscript form is not active ".
i hav also attached my print program for ur easy reference.
====================================================================*
FORM open_form_slv.
*' Description:
*' Add information for the SAP spooler
*' Change the name of the standard customized form for Zebra print
*' Last Change Vers Programmer Reason
*1
DATA: BEGIN OF print_infos.
INCLUDE STRUCTURE itcpo.
DATA: END OF print_infos.
DATA: form_name(16) TYPE c, char1(1) TYPE c, ind_beg TYPE i.
PERFORM itcpo_fuellen.
MOVE-CORRESPONDING itcpo TO print_infos.
WRITE sy-datum USING EDIT MASK '__.__.____'
TO print_infos-tdcovtitle+1.
WRITE sy-uzeit USING EDIT MASK '__:__:__'
TO print_infos-tdcovtitle+12.
CONCATENATE itcpo-tddest sy-uname ' PO'(001) ekpo-ebeln ' Doc.No'(002)
mseg-mblnr print_infos-tdcovtitle
INTO print_infos-tdcovtitle SEPARATED BY space.
form name from the table YZZM_GR_LABEL
IF NOT g_fonam IS INITIAL.
tnapr-fonam = g_fonam.
ENDIF.
if the used printer is a Zebra label printer, then the customized
layout set name ???_???_XXX will be changed to ???_???_ZP
SELECT SINGLE * FROM tsp03d WHERE padest = nast-ldest.
IF tsp03d-patype = 'YZZX_ZEB'.
ind_beg := 15.
WHILE ind_beg > -1.
char1 := tnapr-fonam+ind_beg. " substr(tnapr-fonam,ind_beg,1)
IF char1 = '_'.
form_name := tnapr-fonam(ind_beg).
CONCATENATE form_name '_ZP' INTO tnapr-fonam.
EXIT.
ENDIF.
ind_beg := ind_beg - 1.
ENDWHILE.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
form = tnapr-fonam
dialog = ' '.
x_open := x.
IF mseg-weanz = 0. mseg-weanz = 1. ENDIF.
IF syst-tcode <> 'MB90' AND NOT g_flag_popup IS INITIAL.
check for requirement of printing label and ask for gr-quantities (popup)
SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln.
CLEAR yzzm_gr_quantity-no_popup.
ELSE.
and ask not for gr-quantities
IF syst-tcode = 'MB90'.
yzzm_gr_quantity-erfmg := mseg-menge.
ELSE.
yzzm_gr_quantity-erfmg := mseg-menge / mseg-weanz.
ENDIF.
yzzm_gr_quantity-no_popup := x.
ENDIF.
determination inspection lot number
CLEAR qals-prueflos.
SELECT SINGLE * FROM qals WHERE mblnr = mseg-mblnr
AND zeile = mseg-zeile
AND mjahr = mseg-mjahr.
determination vendor batch
CLEAR mch1-licha.
SELECT SINGLE * FROM mch1 INTO mch1 WHERE matnr = mseg-matnr
AND charg = mseg-charg.
ENDFORM. "open_form_label
=================================================================== *
FORM we01_print_slv.
*' Description:
*' print out of hazardous symbol
*' controls the Zebra printer
*' Last Change Vers Programmer Reason
*****26.09.2007 Starts
DATA: l_objky TYPE nast-objky,"Object key
l_vstat TYPE nast-vstat. "Processing status of message
*****26.09.2007 Starts
TABLES: mgef, t300.
FIELD-SYMBOLS: .
DATA: aux_index LIKE sy-index.
DATA: count_haz_sym, position TYPE n, zw TYPE p DECIMALS 1.
DATA: aux_value(5) TYPE c.
DATA: txt(10) TYPE c, pos(5) TYPE c.
t001w-werks = r_werks.
t001w-name1 = r_name1.
PERFORM read_address.
*2
SELECT SINGLE * FROM ekpo WHERE ebeln = mseg-ebeln
AND ebelp = mseg-ebelp.
CLEAR mara-stoff.
SELECT SINGLE stoff INTO mara-stoff FROM mara WHERE matnr = mseg-matnr.
IF NOT mara-stoff IS INITIAL.
CLEAR t300.
SELECT SINGLE * FROM t300 WHERE lgnum = mseg-lgnum.
IF NOT sy-subrc IS INITIAL.
for plants without warehouses try to use the country code
CASE mseg-werks.
WHEN 'BUP'.
t300-regkz := 'US '.
ENDCASE.
ENDIF.
CLEAR mgef.
SELECT SINGLE * FROM mgef WHERE stoff = mara-stoff
AND regkz = t300-regkz.
ENDIF.
in case of more then one label, use for each a new output window
(not only for the first)
IF g_count > 1.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-WINDOW'.
ENDIF.
Ausgabe Gefahrstoffsysmbole Neustadt, V.Hilgert 14.07.98
*For output type YNL7, the hazardous warning symbol has to be printed at the bottom of the label.So label is called before that.
IF tnapr-kschl = 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
ENDIF.
count_haz_sym = 0. position = 0.
WHILE count_haz_sym = 'XN'.
For output type YNL7, the width of the standard text is small.
IF tnapr-kschl = 'YNL7'.
zw = position * '0.2' + '0.1'. pos = zw.
ELSE.
zw = position * '1.3' + '0.1'. pos = zw.
ENDIF.
IF tsp03d-patype = 'YZZX_ZEB'. " device type for ZEBRA label priter
aux_value := count_haz_sym.
ELSE.
aux_value := pos. " HP/Kyocera or other laser printer
ENDIF.
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&XPOS&'
value = aux_value
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element =
window = 'MAIN'
EXCEPTIONS
element = 1
function = 2
type = 3
unopened = 4
unstarted = 5
window = 6
OTHERS = 7.
IF sy-subrc = 0.
*Varying the position for YNL7
IF tnapr-kschl = 'YNL7'.
position = position + 2.
ELSE.
position = position + 1.
ENDIF.
ENDIF.
ENDIF.
ENDWHILE.
IF NOT mseg-vfdat IS INITIAL.
am07m-mhtxt = text-105.
ENDIF.
IF NOT am07m-mhdat IS INITIAL.
am07m-mhztx = text-106.
ENDIF.
IF ekko-bsart = 'UB'.
am07m-litxt = text-101.
am07m-libzg = ekko-reswk.
ELSE.
am07m-litxt = text-100.
am07m-libzg = ekko-lifnr.
ENDIF.
belpos-mblnr = mkpf-mblnr.
belpos-zeile = mseg-zeile.
CONDENSE belpos NO-GAPS.
am07m-belpos = belpos.
IF t156-shkzg = h.
am07m-hdlne = text-020.
ELSE.
am07m-hdlne = text-010.
ENDIF.
Ausgabe der Etiketten mit den ind. Mengen
IF NOT g_flag_popup IS INITIAL.
SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln
AND weanz = g_count.
ELSE.
* print the number of labels is handeled by the Zebra printer
IF tsp03d-patype = 'YZZX_ZEB'. " device type for Zebra label prts
g_lbls_tot := mseg-weanz - g_count + 1.
g_break_print := x.
ENDIF.
ENDIF.
mseg-erfmg := yzzm_gr_quantity-erfmg.*
********26.09.2007 Starts
CONCATENATE mseg-mblnr mseg-mjahr mseg-zeile INTO l_objky.
SELECT SINGLE vstat INTO l_vstat FROM nast WHERE kappl = 'ME' AND
objky = l_objky AND
kschl = 'YNL7'.
********26.09.2007 Ends
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&nummer&'
value = g_count.
IF tnapr-kschl <> 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
else.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'BAR_CODE'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "GR_label_print
*& Form lesen
text
-->OBJKY text
FORM lesen USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-evers IS INITIAL. "Versandvorschriften lesen.
PERFORM t027_lesen.
ENDIF.
PERFORM bestellung_lesen.
IF NOT ekpo-knttp IS INITIAL AND NOT
ekpo-weunb IS INITIAL.
PERFORM kontierung_lesen. "für multikontierte Bestellungen
ENDIF.
IF NOT mseg-ematn IS INITIAL.
PERFORM lesen_htn.
ELSE. "111277/PH
CLEAR am07m-mfrpn. "111277/PH
ENDIF.
IF mseg-matnr IS INITIAL.
mseg-menge = mseg-bpmng.
mseg-meins = mseg-bprme.
PERFORM bestelltext_lesen.
CLEAR mabdr.
ELSE.
PERFORM material_lesen.
ENDIF.
PERFORM tab024_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM. "lesen
Lesen für WE-Schein Fert.Auftrag -
FORM lesen_wf USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
PERFORM auftrag_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ELSE.
mseg-menge = mseg-erfmg.
mseg-meins = mseg-erfme.
ENDIF.
PERFORM tab024d_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM. "lesen_wf
Lesen für Warenausgang -
FORM lesen_wa USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ENDIF.
PERFORM ladr_lesen.
ENDFORM. "lesen_wa
Druck Vorbereiten -
FORM open_form.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = itcpo
dialog = ' '.
PERFORM lesen_t159p.
x_open = x.
ENDFORM. "open_form
Druck Vorbereiten Sammelscheine -
FORM open_form_sammel.
PERFORM lesen_t159p.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = itcpo
form = tnapr-fonam
dialog = ' '.
x_open = x.
ENDFORM. "open_form_sammel
Druck schließen -
FORM close_form.
CHECK NOT x_open IS INITIAL.
CALL FUNCTION 'CLOSE_FORM'.
CLEAR x_open.
ENDFORM. "close_form
Hilfsfelder versorgen für Sammelscheindruck -
FORM helpdata1.
*mkpf = mkpf.
*mseg-lgort = mseg-lgort.
*ladr = ladr.
save_mkpf = *mkpf-usnam.
save_mblnr = *mkpf-mblnr.
save_budat = *mkpf-budat.
save_cpudt = *mkpf-cpudt.
save_ematn = *mseg-ematn.
save_lgort = *mseg-lgort.
save_ladr = *ladr.
*t001w = t001w.
save_werks = *t001w-werks.
save_name1 = *t001w-name1.
*ekko = ekko.
*am07m = am07m.
save_lifnr = *ekko-lifnr.
save_ebeln = *ekko-ebeln.
save_ekgrp = *ekko-ekgrp.
save_linam = *am07m-name1.
save_lina2 = *am07m-name2.
*t024 = t024.
save_eknam = *t024-eknam.
save_ektel = *t024-ektel.
*mkpf-usnam = old_mkpf.
*mkpf-mblnr = old_mblnr.
*mkpf-cpudt = old_cpudt.
*mkpf-budat = old_budat.
*mseg-ematn = old_ematn.
*mseg-lgort = old_lgort.
*ladr = old_ladr.
*t001w-werks = old_werks.
*t001w-name1 = old_name1.
*t024-eknam = old_eknam.
*t024-ektel = old_ektel.
*ekko-lifnr = old_lifnr.
*ekko-ebeln = old_ebeln.
*ekko-ekgrp = old_ekgrp.
*am07m-name1 = old_linam.
*am07m-name2 = old_lina2.
save_lfa1 = lfa1.
IF NOT old_lfa1 IS INITIAL.
lfa1 = old_lfa1.
ENDIF.
ENDFORM. "helpdata1
--- Versorgung der Hilfsfelder vor CLOSE_FORM bei Sammelscheindruck --
FORM helpdata2.
old_lfa1 = save_lfa1.
lfa1 = save_lfa1.
old_mkpf = save_mkpf.
old_lgort = save_lgort.
old_ladr = save_ladr.
old_budat = save_budat.
old_cpudt = save_cpudt.
old_werks = save_werks.
old_name1 = save_name1.
old_mblnr = save_mblnr.
old_lifnr = save_lifnr.
old_linam = save_linam.
old_lina2 = save_lina2.
old_ebeln = save_ebeln.
old_ekgrp = save_ekgrp.
old_eknam = save_eknam.
old_ektel = save_ektel.
old_ematn = save_ematn.
*mkpf-usnam = save_mkpf.
*mkpf-mblnr = save_mblnr.
*mkpf-budat = save_budat.
*mkpf-cpudt = save_cpudt.
*mseg-ematn = save_ematn.
*mseg-lgort = save_lgort.
*ladr = save_ladr.
*t001w-werks = save_werks.
*t001w-name1 = save_name1.
*t024-eknam = save_eknam.
*t024-ektel = save_ektel.
*ekko-lifnr = save_lifnr.
*ekko-ebeln = save_ebeln.
*ekko-ekgrp = save_ekgrp.
*am07m-name1 = save_linam.
*am07m-name2 = save_lina2.
ENDFORM. "helpdata2
Form Lesen Warenausgang Lohnbearbeiter -
FORM lesen_wlb USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ENDIF.
ON CHANGE OF mseg-lifnr.
PERFORM read_address.
ENDON.
ENDFORM. "lesen_wlb
*eject
Fuellen der ITCPO -
FORM itcpo_fuellen.
IF xscreen NE space.
*- Testausgabe auf Bildschirm -
itcpo-tdpreview = 'X'.
itcpo-tdnoprint = 'X'.
ELSE.
CLEAR: itcpo-tdpreview,
itcpo-tdnoprint.
ENDIF.
MOVE-CORRESPONDING nast TO itcpo.
itcpo-tdcover = nast-tdocover.
itcpo-tddest = nast-ldest.
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed = nast-dimme.
itcpo-tddelete = nast-delet.
itcpo-tdcopies = nast-anzal.
itcpo-tdprogram = sy-repid.
ITCPO-TDTELELAND = US_COUNTRY.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
itcpo-tdnewid = x.
ENDFORM. "itcpo_fuellen
*eject.
------------ FORM lesen der Lagerortadr. ---------------------------*
FORM ladr_lesen.
DATA: BEGIN OF addr_sel.
INCLUDE STRUCTURE addr1_sel.
DATA: END OF addr_sel.
CLEAR ladr.
SELECT SINGLE * FROM twlad WHERE werks = mseg-werks
AND lgort = mseg-lgort
AND lfdnr = '001'.
IF NOT twlad-adrnr IS INITIAL AND sy-subrc IS INITIAL.
MOVE twlad-adrnr TO addr_sel-addrnumber.
ENDIF.
CALL FUNCTION 'ADDR_GET'
EXPORTING
address_selection = addr_sel
IMPORTING
sadr = ladr
EXCEPTIONS
OTHERS = 1.
ENDFORM. "ladr_lesen
**& Form REPRINT
text
*FORM reprint.
TABLES : nase.
DATA : x TYPE string.
IF nase-vermo = 2.
x = 'REPRINT'.
ENDIF.
*ENDFORM. "REPRINT
Kindly do the needful.
Thanks in advance
Regards
SwarnaHi Swarna,
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
<b>form = tnapr-fonam</b>
dialog = ' '.
x_open := x.
I thing its not a good way to pass the Form name to the Parameter.
Try like,
data : temp_form like tnapr-fonam.
<b>form = temp_form</b>
Thanks. -
What kind of printer would you use to print on a lorry?
Hi,
One of my client sells items from the lorry, so he wants his drivers to print invoices on the way. My question is what kind of printer would you use to print on a lorry? Any idea, experience?
Thx in advance,
LaciHi Laci,
There are quite a few mobile printers, for example HP does a range of battery powered Officejet printers which you could use on the go. For instance, check this out:
http://www.shopping.hp.com/product/CB026A%2523B1H
I hope this helps!
xx Nat -
I have an Itel based iMac on which I created a Wifi network using Airport. My iPhone5 uses the Wifi on my iMac and still works.My problem is that I can't remember the Wifi password and it is not in my Keychain. What can I do so that I can connect other devices to my Wifi?
Read the router's user manual on how to change your password.
If you are going to select another password, make sure it's one that you will NEVER forget AND no one else can figure it out. Print it out & keep in a safe place. A place that ONLY you know about AND never forget. -
Can I use HP Pro 8600 with usb and wireless at the same time
Can I use HP Pro 8600 with usb and wireless at the same time? Sometimes I cannot get the wireless to work, it seems to be my laptop. It would be nice if I could use the usb, but it doesn't work. What should / can I do, if anything?
SamHi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?
No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.
-
How can a digital copy be used in a household with multiple apple ids, synced on the same computer? I want to put a digital copy on my device, and on my wife's device.
Please help.you're welcome.
actually, unless you take an extra step, the first opened swf will close. if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close. -
I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar. They have stopped syncing...mostly.
Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine. But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar. If I reboot the computer, the iCloud data shows up.
Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
All syncing works with my iPhone.
I have signed out of iCloud on PC. I have stopped syncing and re-started. No change.
I have an .aplzod folder for iCloud. I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
Any help would be appreciated. Curious that Outlook will upload to iCloud but not receive downloads unless I reboot. However, rebooting does not download the missing Contacts.
Jim RobbinsHi Jim!
You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
Completely close and reopen the iCloud Control Panel.
If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the Windows Control Panel:
In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
Open Outlook and test to see if the issue has been resolved.
Ensure the iCloud Outlook Add-in is active within Outlook.
Outlook 2010:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thanks for using the Apple Support Communities!
Cheers,
Braden -
How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!
Because you can only synce with one iTunes library and you are switching libries by using the new computer. To nake this yyour syncing computer:
- Move all the media(apps, music, synced video and photos etc) to the new computer.
- Connect the iPofd yo the computer and bake a backup fo the iPod by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the backup that iTunes makes doe not include media.
To move mdia to the new computer see:
iTunes: How to move your music to a new computer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer -
I've increased the maximum number of buffers to higher than I need, but I still cannot acquire more than 139 images with the Duncan Tech digital video camera before I get a memory lock error. Is there any way to increase the number of images I can acquire in a sequence using the IMAQ 1424 with 80MB of onboard memory?
It sounds like you are already bypassing the onboard memory. If you weren't, you would only be able to acquire about 20 images.
If I understand correctly, you do not convert the images until after you acquire them. This means each acquired image is 4.13 MB, and 139 images will take 574 MB of memory. I wouldn't be surprised if that was all the free memory available on a 1 GB machine. The operating system, LabVIEW and any other software running probably take up the rest of the memory. You might want to put your computer on a diet and minimize the number of other programs and utilities running. The only other option I see is getting more memory if possible.
Is there a way that you can reduce the number of images you need to acquire? Pe
rhaps skipping every other frame? Do you really need more than 139 images?
Is it possible to acquire the images in monochrome? That would triple the number of images that you could acquire.
Bruce
Bruce Ammons
Ammons Engineering -
Question: Can Apple Remote Desktop be used to assist someone with cognitive disability to type on an Imac in another city?
You can read about the features of Apple Remote Desktop for yourself and decide whether it would be of help:
http://www.apple.com/remotedesktop/
I can't see how it would help anyone type on a Mac, remote or not, disability or not, but perhaps you have assistance in mind that I'm not envisioning.
Regards. -
Can i use imovie 09 on my imac and iPad?
can i use imovie 09 on my imac and iPad?
Welcome to the Apple Support Communities
You can use iMovie '09 on the iMac, and you can use the iPad iMovie version on the iPad, which you can get from the App Store -
Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few months and updates ago
I tried your suggestion, not knowing that the direct pdf printer would also "save as" PDF, but when I try your suggestion and use the Adobe PDF printer that is a direct creation of the PDF from the browser (IE9), instead of the "black out" areas I get when I use the "Convert to" button, I get missing blocks of the resulting PDF, and only get the first 1/4 to 1/3 of the webpage.
Just to clarify, when I said I print the webpage and then scan, that is a work around I have to do if I need a scanned version of the way a webpage appears on a particular date and time, instead of the one step process I used to be able to do when Adobe Acrobat would actually convert the webpage to a pdf without blackout areas or, if I try your suggestion, blank spots with a partial webpage. But the idea was one I had not thought of and I appreciated the thought.
Yes, Acrobat was updated, and is updated, and was working fine until a few months ago, Win 7 and Office 32 bit versions, Office 2010
Maybe you are looking for
-
Connecting my macbook pro to my panasonic viera tv - no picture or sound
Hi there, I'm trying to connect my macbook pro to my panasonic viera tv by using an HDMI chord and a Thunderbolt mini displayport, but I can't seem to get it to work. Im just getting a screen saver, not even the same screen saver I currently have set
-
HP LASERJET CP1525n COLOR PRINTER password problem
I forgot the login username and password of my HP LASERJET CP1525n COLOR PRINTER due to which i am unable to access the web pannel for administration like setting a new IP etc. Infact, i want to change it's IP setting which is configured to get IP vi
-
Runtime error in include L0COEF05
Hi, When executing a standard program.there is a runtime call to a form Call_by_cluster_only present in standard include L0COEF05 present in function group SAPL0COE .This is onlt creating issue in ECC6.0 however it is working fine in 4.6C. In ECC6.0
-
Depreciation Update failed.
Hi Gurus, I wanna know if I didn't run the depreciation in one whole year which has no assets posting, what will happen in the next year depreciation? I tested it in my dev. I opened 2006 to run all the asset depreciation (AFAB) and retired the asset
-
Hi all. Anybody know of a decent app i can get that will make my iphone photos i upload look really good? When i upload photos and print them direct to my printer or via airprint the pictuers come out really bad. Any ideas? Thanks