Using expression controlling Mainstage

Do certain logic instruments not respond to expression? I have a pedal plugged into my controller mapped to cc#11 for all instruments. Evb3, ES2, and others respond to the pedal like they should, while ES1, the Fm synth, and a few others won't respond even though I see the expression indicator changing in the channel strip.....can someone explain this? thanks.

Without going into a case-by-case analysis, yes. But there are loads of preferences you can change & edits you can make to affect how instruments respond to controllers. It's a big topic, but try looking at both the 'Controls' & also the 'Editor' views for each instrument for a start.
Sometimes you just need to switch it on (& usually it was off because the original patch wouldn't have used that controller in 'real life').

Similar Messages

  • Can Akai APC 40 be used to control Mainstage?

    Sorry if this is a basic question. But, I just ordered the Akai APC 40 for Ableton Live but I also incorporate Mainstage into my live sets.
    The APC 40 is obviously streamlined for Ableton... But, will it still work with Mainstage 2?
    Many thanks!

    Blueberry wrote:
    Not everything works, because it is designed to only work with Ableton Live.
    I figured... So it will probably be hit or miss correct? I'll probably just stick with my nanokontrol and keyboard when I'm performing my mainstage sets...
    Thanks!

  • Can't retrieve username using expression builder on a run time data control

    Here's the scenario:
    1. I added a Data Control resource in WebCenter Spaces, which has one paramater to get: username.
    2. I added the Data Control in Oracle Composer, and selected the return method to show as a read only form.
    3. In adding the Return method, under DC Parameters I have to get the username and place it on my parameter, ie: arg0 = username. arg0 is my data control parameter.
    I tried using every possible code there is in the Expression Editor to retrieve the username, but I keep getting null when I test it. I've tried *#{securityContext.userName}*, *#{webCenterProfile[securityContext.userName].userName}*. I also tried creating a page parameter, and use it like this: *#{bindings.myUsername}*, but still won't work. Its always null.
    How do I retrieve the username and bind it to the parameter of my data control using expression editor? Please help. Thanks.
    Edited by: aeriaL18 on Aug 13, 2012 12:15 PM

    Hi ,
    I believe this should be posted to Webcenter Portal forum : WebCenter Portal
    Thanks
    Srinath

  • Visual Studio 2013 slows down + crashes when using Source Control features.

    I have spent two full days trying to resolve this issue but no luck so here we go,
    I have created a project using Visual Studio Team Foundation Server plug-in in the past. Later on I switched to
    Microsoft Git Provider.
    Now when I connect to that project in the Team Explorer and double click on the solution to work on it locally it somehow changes the plug in to Microsoft Git Provider automatically and of course I can't
    Commit/Commit and Push since I receive following error in the Team Explorer,
    An error occurred. Detailed message: Failed to open directory 'C:/Users/.../AppData/Local/Application Data/'
    Manually changing the plug-in to the Visual Studio Team Foundation Server
    results in a broken Team Explorer as below,
    With Settings leading to an empty pane, and also a warning in the Team Explorer's Changes page telling me the message below if I click on Pending Changes...
    Microsoft Git Provider is not the current Source Control plug-in. Change Plug-in
    And manually selecting the solution from Solution Explorer, right click and
    Add Solution to Source Control, leads to never ending hour glass and (Not responding) visual studio.
    New Projects
    Creating a new project is straight forward, unless I "Add to Source Control" is checked. If so, again never ending process if Microsoft TFS plug-in is selected in the tools and eventually me Ending the Visual Studio task. And a VERY long process
    (40+ mins) if I have chosen Microsoft Git but that finishes successfully rather.
    New TFS project from Team Explorer
    If I create a new project in my Online Web Studio
    Click on Open with Visual Studio Link => Opens and connects to a my newly created TFS in team explorer.
    Clicking new in Team Explorer under Solutions to create a new solution and bind it to this Repo
    leads to straight crash of Visual Studio and restarting attempt of VS.
    So I really can't use Source Control from visual studio other than cloning GitHub's existing repo's on Visual Studio and Committing my current Microsoft Git managed projects.
    I have attempted
    Repairing Visual Studio (no luck in results)
    Devenv.exe /setup (no luck)
    Trying to scrap the SCC info on my solution then at least it won't get picked up by source control then I can Check it in as a new project. (no luck and the solution picks the Microsoft Git upon opening it by clicking on the .sln file.) I have followed
    these steps in this stack overflow answer.
    And lots of mucking around like removing my workspaces almost Thousand times and putting them back, binding and etc.
    I am really stuck on this and it's holding me back from staring a new project (which is problematic using Adding to Source Control) and unfortunately is dependent on the old project (which is developed under Visual Studio Team Foundation Server Plug-in which
    is throwing tantrums)
    Would like to hear you pro-s input on this
    Using 
    Visual Studio 2013 Community edition (recently switched from Pro to Express to Community)
    Windows 7 (64-bit)
    Git tools
    Git windows installation
    Nuget Package manager
    Visual Studio Log File
    http://filesave.me/file/50620/log-txt.html
    Mehradzie

    Hi Mehradzie,
    Based on the description, seems you're working with Git team project in Visual Studio Online(formerly Team Foundation Service). I'd like to know whether you mean Visual Studio Git command tool as the plug-in, and if you're trying to create solutions/projects
    with Visual Studio and add them to the created Git team project.
    From the screenshot, you're not connect to the Git team project by using Team Explorer. To work with Git team project locally, you can follow the instructions as below:
    Connect to Git team project by using Team Explorer, after that you might install Git tools if you connect to the team project for the first time
    Clone the remote Git repository to a local git repository and set the path to local git repository
    Create a solution and select Git source control, also saved to the local path of the local git repository
    Select your branch, and then click "Changes" and Commit the changes
    Click "unsynced commits" and push the commit to remote git repository
    You can also refer to the links below for more information about getting started with Git in Visual Studio Online.
    http://www.visualstudio.com/en-us/get-started/share-your-code-in-git-vs.aspx
    http://blogs.msdn.com/b/visualstudioalm/archive/2013/01/30/getting-started-with-git-in-visual-studio-and-team-foundation-service.aspx
    If you still have any other concerns, please elaborate more details about your scenario. Thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Using Table Control

    Hi Experts,
    I am working on module pool Program using " Table Control ".
    the below code is a part of program.
    "  Here i want insert new lines ( New values ). Please tell me that how to Do? "
    MODULE USER_COMMAND_0100 INPUT.
      SAVE_OK = OK_CODE.
      CLEAR OK_CODE.
      CASE SAVE_OK.
        WHEN 'INSERT'.
       "  Here i want insert new lines ( New values ). Please tell me that how to Do? "
        WHEN 'TOGGLE'.
          LOOP AT EMPLOYE-COLS INTO COLS WHERE INDEX GT 2.
            IF  COLS-SCREEN-INPUT = '0'.
              COLS-SCREEN-INPUT = '1'.
            ELSEIF  COLS-SCREEN-INPUT = '1'.
              COLS-SCREEN-INPUT = '0'.
            ENDIF.
            MODIFY EMPLOYE-COLS FROM COLS INDEX SY-TABIX.
          ENDLOOP.
        WHEN 'DELETE'.
         READ TABLE EMPLOYE-COLS INTO COLS WITH KEY SCREEN-INPUT = '1'.
          IF SY-SUBRC = 0.
            LOOP AT ITAB INTO ZEMPLOYE WHERE EMPID = 'X'.
              DELETE ITAB.
            ENDLOOP.
          ENDIF.
      ENDCASE.
    ENDMODULE.   
    Its Urgent  
    Thank You.
    Basu

    Hi,
    WHEN 'INSERT'.
    " Here i want insert new lines ( New values ). Please tell me that how to Do? "
    <b>Append initial line to EMPLOYE.</b>
    Or
    Change the table control attribute for rows.
    Reward if helpful.

  • Loading flat files located on a server using the Control Center piece ofOWB

    Loading flat files from a server with OWB
    I am successful loading files with OWB, as long as they resided on my workstation in the C:\ drive. I copied the files to a Linux server into directories owned by Oracle/oinstall, permissions on the directories containing the files are 777. I ran the OWB client from the server with the following results:
    Error
    RPE-01013: SQL Loader reported error condition, number 1.
    SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: The system cannot find the file specified.
    SQL*Loader: Release 10.2.0.1.0 - Production on Fri Mar 9 11:15:58 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL*Loader-500: Unable to open file (/u00/data/owb_repos1/state_codes.csv)
    SQL*Loader-553: file not found
    SQL*Loader-509: System error: The system cannot find the file specified.
    I tried to load the file using the control center from both the windows client and the server client. Can I do this from either one?
    I can't import the file in the Design Center from the /u00/data/owb_repos1 directory, it does not show up.
    If anyone has received similiar errors from OWB, please tell me how I can fix this. THANKS!!!
    [d97886@owbtest owb_repos1]$ pwd
    /u00/data/owb_repos1
    [d97886@owbtest owb_repos1]$ ls -la
    total 24
    drwxrwxrwx 2 oracle oinstall 4096 Mar 19 12:14 .
    drwxrwxrwx 18 oracle oinstall 4096 Mar 6 16:41 ..
    -rwxrwxrwx 1 oracle garrett 1481 Mar 8 07:32 state_codes.csv
    [d97886@owbtest owb_repos1]$

    Hi
    This is what i do for my flat files (i am loading my tables from the flat files):
    1) Create location for the files in OWB and it should look something like \\path_to_where_the_files_are. Here you should be able to browse to your Linux box and select the location of the files.
    2) Then check whatever you use (i use TOAD) and you should see in owb schema a directory created there which points to the location of the flat file.
    3) then just follow the guide to sample the files etc and you are good to go.
    Basically OWB has to be able to see the files that are on Linux machine.
    Alternatively you can map your Linux share to your windows box (use samba or something) and use it that way.
    Sorry if it is stating the obvious.
    Hope this helps
    Kind Regards
    Vix

  • Issue in Printing, using Bursting control file

    Hello All,
    We are using bursting control file to print and email. Email option is working fine. But when it comes to printing, it is printing "PDF file not printed. 128MB of memory is required to enable direct PDF printing" in the printout.
    We are using CUPS and below is the path we are using for printing,
    ipp://localhost:631/printers/YG_MAIN
    When we try to run the same program manually, by giving the printer name and number of copies to 1, then we are able to see the pdf output. Other normal bi publisher reports are also working fine, w.r.t that printer. We are facing this issue only when we are running xml bursting program, with print option.
    Any suggestions please..
    Here is the full bursting control file,
    <?xml version="1.0" encoding="UTF-8"?>
    <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
    <xapi:globalData location="stream">
    </xapi:globalData >
    <xapi:request select="/XX_IMB/LIST_G_PAT/G_PAT">
    <xapi:delivery>
    <xapi:email id="123" server="XXXXXX.com" port="25" from="[email protected]">
    <xapi:message id="123" to="${DESTINATION}" attachment="true" content-type = "text/html" subject="Test email"> Please find the attachement</xapi:message>
    </xapi:email>
    <xapi:print id="print1" printer="ipp://localhost:631/printers/${DESTINATION}" copies="1"/>
    </xapi:delivery>
    <xapi:document output-type="pdf" delivery="123">
    <xapi:template type="xsl-fo" location="xdo://XXCUS.XX_MAIN.en.US" filter=".//G_PAT[DESTINATION_TYPE='Email']">
    </xapi:template>
    </xapi:document>
    <xapi:document output-type="pdf" delivery="print1">
    <xapi:template type="xsl-fo" location="xdo://XXCUS.XX_MAIN.en.US" filter=".//G_PAT[DESTINATION_TYPE='Print']">
    </xapi:template>
    </xapi:document>
    </xapi:request>
    </xapi:requestset>

    BI Publisher bursting to CUPS printer doesn't use PASTA, so output doesn't get converted from PDF to Postscript which it does when you run it through concurrent manager.
    You can put an entry in the $XDO_TOP/resource/xdodelivery.cfg as follows (replace for your printer):
    <pre>
    <server name="MYPRINTER" type="ipp_printer" default="true">
    <uri>ipp://mycupsserver.mydomain:631/printers/MYPRINTER</uri>
    <filter>/usr/local/bin/pdf2ps -paper A4 {infile} {outfile}</filter>
    </server>
    </pre>
    Regards,
    Gareth

  • Unable to print crystal report over web using ActiveX Control

    Post Author: jimmyp
    CA Forum: General
    We have a problem with printing crystal report over web using ActiveX Control.  When clicking print button, it only shows a blank dialog web crystal viewer page without any error.  The page just simply hangs.  We installed the PrintControl DLL and enable all the security setting for ActiveX Control for IE.  It still does not print.  Does anyone know why?  
    Environment.
    Bundle Crystal Report v10
    Asp.net 2.0
    IE 6.0 or higher.
    Appreciate for your help.
    Jimmy

    Post Author: Ian Kulmatycki
    CA Forum: General
    A team member here found this, I haven't read it, I'm not sure if our problems are related to this, but hopefully it helps someone:
    -ian
    When Secure Sockets Layer (SSL) is enabled, using the ActiveX control to print reports from a Crystal 10 DHTML viewer results in the following error message:
    "A communication error occurred, printing will be stopped."
    How can this error message be resolved?
    Resolution
    This is a known issue with Crystal Reports 10 and Crystal Enterprise 10 viewers and has been tracked. The Track ID is ADAPT00282199.
    This error occurs due to the receiving application performing a case-sensitive check for the HTTPS request header value "ON". When a sender application sends the value as "on" in lower case, the error occurs. The update below changes the receiving application to be case-insensitive.
    Hot Fixes or Service Packs address this issue as indicated below. With the updates, this issue is resolved.
    Unless indicated otherwise, Weekly Hot Fix updates from our FTP site have only been tested with English versions of products.
    For Crystal Reports 10 and Crystal Enterprise 10, the update for this issue is included in the Crystal 10 Viewers Weekly Hot Fix (WHF). This is available in English only at the following location:
    ftp://ftp.crystaldecisions.com/outgoing/EHF/viewers10win_en.zip
    This issue is addressed in the following components (and later versions):
    PageObjectModel.dll, version 10.0.5.785, dated 8/25/2004
    ReportRenderer.dll, version 10.0.5.785, dated 8/25/2004
    WebReporting.dll, version 10.0.5.785, dated 8/25/2004

  • Custom Infotype - Using Table control in the screen.  IN OM

    Hi,
    I am having a requriement where in I need to create a custom infotype using table control in the screen. I have to create this in OM and I am using PPCI transaction to create the info type. I am able to create the infotype with fields but not table control. Please let me know if any one of you came across and help me with the process I need to follow.
    Thanks in advance.
    Venkat.

    Hello,
    After you create the info type throug PPCi, you can directly go to the Sceen module program created automatically while creating Info type and edit the screen.
    activate it after your changes.
    Regards,
    Srujan.

  • How to control and display video from IP camera using ActiveX control over Internet.

    Hello,
    I need to control my IP cameras over the internet. I need to log into the cameras and then display the video.  There's an ActiveX control registered on the computer and works fine with IE to access and control the cameras. Controlling the cameras using IE works fairly well, but there are some quirks that I'd like to eliminate by using my own custom code.
    Has anyone created a vi that controls a Foscam FI8905W over the Internet? I’ve attempted, but I keep getting a catastrophic failure when I try to call ManagementConnect Method in the DVM_IPCam2 ActiveX Control Module V1.0. I'm not sure whether I need to establish an IP connection with the cameras first, or allow the ActiveX control to establish it for me.
    Some example code would be greatly appreciated. Running LabVIEW 2011 on a Win7 32bit.  Even some code used to control a similar device using ActiveX over Internet would be helpful.

    I have an example vi for interfacing to the foscam activex.
    I plan on using mouse click events within the activex window to trigger the PT function.
    I only have the basic up/down/right/left directions and not the down-right/down-left/up-right/up-left in the enum.  You can load the camera's web page and view the source to see the Java script code that uses the activex control.  There are definitions for the other directions.
    I had to mark the control as "Disabled" to keep click events from going to the activex control.  If I double click the control, it goes full screen.  If I then click on it to get out of full screen mode the video never returns or returns to the wrong spot in the VI.
    Attachments:
    Foscam Demo.vi ‏24 KB

  • How to Schedule Job using Database Control for SQLPLUS script?

    Hi All,
    I am using Database version 10.2. I would like to schedule a SQLPLUS script job using Database control (Not using Grid Control!). The following is the script.
    ========================================================
    define OEM_FRIENDLY=1
    define OWB_BACKGROUND=0
    set serveroutput on
    set verify off
    whenever sqlerror exit failure;
    define REPOS_OWNER='&1.'
    define LOCATION_NAME='&2.'
    define TASK_TYPE='&3.'
    define TASK_NAME='&4.'
    define SYSTEM_PARAMS='&5.'
    define CUSTOM_PARAMS='&6.'
    alter session set current_schema = &REPOS_OWNER.;
    set role owb_d_&REPOS_OWNER., owb_o_&REPOS_OWNER.;
    variable exec_return_code number;
    begin
    -- Initialize Return Code
    :exec_return_code := wb_rt_api_exec.RESULT_FAILURE;
    -- Run Task
    :exec_return_code := wb_rt_api_exec.run_task('&LOCATION_NAME.',
    '&TASK_TYPE.',
    '&TASK_NAME.',
    '&CUSTOM_PARAMS.',
    '&SYSTEM_PARAMS.',
    &OEM_FRIENDLY.,
    &OWB_BACKGROUND.);
    end;
    exit :exec_return_code;
    ===========================================================
    Is it possible to schedule SQLPLUS script with 6 different parameters? If yes then how can I schedule for monday to friday or only for Saturday and sundays.
    Please provide brief steps.
    Thanks for your help in advance.
    - Mehul

    Let me explain to you about scheduler.
    You can schedule a pl/sql stored procedure TEST_S as follows...
    Begin
    dbms_scheduler.create_job(
    job_name=>'MY_JOB',
    Job_Type=>'STORED_PROCEDURE',
    job_action=>'TEST_S',
    start_date=>sysdate,
    repeat_interval=>'freq=monthly;BYDAY=MON,TUE,WED,THU,FRI',
    end_date=>null');
    END;
    You can also also execute o/s script like .bat or .sh. For this job type should be EXECUTABLE.
    Example of converting a .sql script in .bat script...
    insert.sql
    insert into dept values(50,'IT','LONDON');
    exit
    insert.bat
    sqlplus scott/tiger @insert.sql
    Executing now...
    C:\Documents and Settings>insert.bat
    C:\Documents and Settings>sqlplus scott/tiger @insert.sql
    SQL*Plus: Release 10.2.0.1.0 - Production on Thu Mar 1 08:01:00 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    1 row created.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - P
    oduction
    With the Partitioning, OLAP and Data Mining options
    C:\Documents and Settings>
    So first read about DBMS_SCHEDULER and do the work in prompt. Then you can go and schedule it even by database control.
    Scheduling by database control...
    http://www.oracle.com/technology/oramag/oracle/04-jul/o44tech_dba.html
    Scheduler
    http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_sched.htm#CIHEHDHA
    PS: By default each job you created is disable state. Please enable it by enable procedure of DBMS_SCHEDULER package.

  • How can I use table control to enter data

    Hi all,
    I want to use table control to enter data, instead of using textboxes.
    So that the user can enter many data at once and just click the save button at the end of the work, only one click.
    How can I use the table control at this context?
    Thanks.
    Deniz.

    Hi deniz,
    go through it:
    /people/ravishankar.rajan/blog/2007/02/23/an-easier-way-of-displaying-and-editing-data-using-table-control
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/code%2bto%2bhandle%2bmultiple%2brecords%2bin%2bbdc%2btable%2bcontrol
    Regards,

  • Sales order creation with bapi in webdynpro using table control

    When i use table control to update the line items only first row is getting updated in the sale order creation and the loop is not updating the other row to header only the first row is getting saved, for the same set of data sale order is getting created in va01 for multiple line items. Pls give me some idea to resolve this issue, here is the code i am using for creating sale order using bapi 'BAPI_SALESORDER_CREATEFROMDAT2' method CREATE_SALES_ORDER .
    Declaration for Order Header Node DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.

    DATA: node_order_header TYPE REF TO if_wd_context_node, elem_order_header TYPE REF TO if_wd_context_element, stru_order_header TYPE if_componentcontroller=>element_order_header . * Declaration for Order Items Node DATA: node_order_items TYPE REF TO if_wd_context_node, elem_order_items TYPE REF TO if_wd_context_element, stru_order_items TYPE if_componentcontroller=>element_order_items . * Declaration for Order Partners Node DATA: node_order_partners TYPE REF TO if_wd_context_node, elem_order_partners TYPE REF TO if_wd_context_element, stru_order_partners TYPE if_componentcontroller=>element_order_partners . node_order_header = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_header ). elem_order_header = node_order_header->get_element( ). elem_order_header->get_static_attributes( IMPORTING static_attributes = stru_order_header ). * via lead selection node_order_items = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_items ). elem_order_items = node_order_items->get_element( ). elem_order_items->get_static_attributes( IMPORTING static_attributes = stru_order_items ). * via lead selection node_order_partners = wd_context->get_child_node( name = if_componentcontroller=>wdctx_order_partners ). elem_order_partners = node_order_partners->get_element( ). elem_order_partners->get_static_attributes( IMPORTING static_attributes = stru_order_partners ). DATA: v_sales_doc TYPE bapivbeln-vbeln. DATA: w_order_header_in TYPE bapisdhd1, i_order_header_in TYPE table of bapisdhd1," i_order_partners TYPE TABLE OF bapiparnr, w_order_partners TYPE bapiparnr, i_return TYPE TABLE OF bapiret2, w_return TYPE bapiret2, i_order_items_in TYPE TABLE OF bapisditm, w_order_items_in TYPE bapisditm, i_order_conditions_in TYPE TABLE OF bapicond, w_order_conditions_in TYPE bapicond, w_order_SCHDL type BAPISCHDL, i_order_SCHDL type table of BAPISCHDL. * Order Header Details CLEAR: w_order_header_in, i_order_partners, i_return, i_order_items_in, i_order_conditions_in, w_order_SCHDL, i_order_SCHDL. refresh : i_order_partners, i_return, i_order_items_in, i_order_conditions_in, i_order_SCHDL. w_order_header_in-doc_type = stru_order_header-doc_type. w_order_header_in-sales_org = stru_order_header-sales_org. w_order_header_in-distr_chan = stru_order_header-distr_chan. w_order_header_in-division = stru_order_header-division. w_order_header_in-req_date_h = stru_order_header-req_date_h. w_order_header_in-sales_dist = stru_order_header-sales_dist. w_order_header_in-purch_no_c = stru_order_header-purch_no_c. * Order Item Details CLEAR: i_order_items_in,w_order_items_in. * w_order_items_in-itm_num = stru_order_items-itm_num. w_order_items_in-ITM_NUMBER = stru_order_items-ITM_NUMBER. w_order_items_in-material = stru_order_items-material. w_order_items_in-target_qty = stru_order_items-target_qty."'5'. w_order_items_in-target_qu = stru_order_items-target_qu."'5'. w_order_items_in-plant = stru_order_items-plant. w_order_items_in-target_val = stru_order_items-target_val. w_order_items_in-currency = stru_order_items-currency. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_items_in-material IMPORTING output = w_order_items_in-material. APPEND w_order_items_in TO i_order_items_in. * Order Partner Details CLEAR: i_order_partners,w_order_partners. w_order_partners-partn_role = stru_order_partners-partn_role. w_order_partners-partn_numb = stru_order_partners-partn_numb. CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' EXPORTING input = w_order_partners-partn_numb IMPORTING output = w_order_partners-partn_numb. APPEND w_order_partners TO i_order_partners. * Order Condition Details w_order_SCHDL-ITM_NUMBER = stru_order_items-itm_number." '000010'. w_order_SCHDL-req_qty = stru_order_items-target_qty." '5'. APPEND w_order_SCHDL to i_order_SCHDL. * Create Sales Order BAPI Call *loop at i_order_header_in into w_order_header_in. CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' EXPORTING order_header_in = w_order_header_in IMPORTING salesdocument = v_sales_doc TABLES return = i_return order_items_in = i_order_items_in order_partners = i_order_partners order_schedules_in = i_order_SCHDL order_conditions_in = i_order_conditions_in. * Get message manager DATA: l_current_controller TYPE REF TO if_wd_controller, l_message_manager TYPE REF TO if_wd_message_manager. l_current_controller ?= wd_this->wd_get_api( ). CALL METHOD l_current_controller->get_message_manager RECEIVING message_manager = l_message_manager. DATA: v_message_text TYPE string. * When Sales Order is created commit the data IF NOT v_sales_doc IS INITIAL. CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' EXPORTING wait = 'X'. CONCATENATE 'Sales Document' v_sales_doc 'has been created.' INTO v_message_text SEPARATED BY space. * Report Success message CALL METHOD l_message_manager->report_success EXPORTING message_text = v_message_text. ELSE. v_message_text = 'Error Creating Sales Order'. * Report Error message CALL METHOD l_message_manager->report_error_message EXPORTING message_text = v_message_text. ENDIF. *endloop. endmethod. and code for table control i am using is method WDDOINIT . Types : Begin of item_tab, itm_number type bapisditm-itm_number, material type bapisditm-material, plant type bapisditm-plant , target_qty type bapisditm-target_qty, target_qu type bapisditm-target_qu, target_val type bapisditm-target_val, currency type bapisditm-currency, end of item_tab. *Creating internal table and Work Area of the same structure *as that of the Node created. Data : it_item type standard table of item_tab, wa_item type item_tab. *Appending Blank Work Area to Internal table. ***********************************************888 *LOOP AT it_item INTO wa_item. **wa_item-itm_number to bapisditm-itm_number. **wa_item-material to bapisditm-material. **wa_item-plant to bapisditm-plant. **wa_item-target_qty to bapisditm-target_qty. **wa_item-target_qu to bapisditm-target_qu. **wa_item-target_val to bapisditm-target_val. **wa_item-currency to bapisditm-currency. ** * APPEND wa_item TO it_item. *ENDLOOP. **********************************************88 ******** Do 10 times. Append wa_item to it_item. enddo. ********* "Binding the table DATA lo_nd_order_items TYPE REF TO if_wd_context_node. * DATA lt_material TYPE wd_this->Elements_material. * navigate from to via lead selection lo_nd_order_items = wd_context->get_child_node( name = wd_this->wdctx_order_items ). * @TODO handle non existant child * IF lo_nd_material IS INITIAL. * ENDIF. ** @TODO compute values ** e.g. call a model function * lo_nd_order_items->bind_table( new_items = it_item set_initial_elements = abap_true ). endmethod.

  • Parallel use remote control and touch panel.

    Hi.
    Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and was synchronized with touch panel. Can I use remote control when touch panel is enabled. Now remote control is locked.
    Thank's.    

    Hi
    No. When a codec is paired with a Touch controller it is not possible to use the remote control.
    You question number 677 in link bellow
    http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.pdf
    br Oleksandr

  • Creation of sale order using bapi in webdynpro using table control

    only first row is getting updated when checked in va03, the line items are not getting replaced, only first row is committed..
    Here is the code for table control i used...
    http://www.scribd.com/doc/51879492/creation-of-sale-order-using-bapi-in-webdynpro-using-table-control
    pls help me out with this..

    Duplicate Posting.  Original is here: Sales order creation with bapi in webdynpro using table control

Maybe you are looking for