Using flash projector on multiple screens

hi,
i have a display project for which i will be using 4 plasma
screens linked together as 1 giant screen. I'm not sure if flash's
"full screen" mode will work...and i don't know of any 3rd party
software off the top of my head that will work...
can flash or is there any 3rd party software that will allow
me to run a flash projector across multiple screen connected
together?

icecappacino wrote:
> hi,
>
> i have a display project for which i will be using 4
plasma screens linked
> together as 1 giant screen. I'm not sure if flash's
"full screen" mode will
> work...and i don't know of any 3rd party software off
the top of my head that
> will work...
Flash won't do it in flull screen, tho 3rd party tools will.
Jugglor from
http://www.FlashJester.com
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Does Flashplayer 17 work with Windows 8.1? (Using Flash Projector)

I recently started playing a game called "Realm of the Mad God". This is a Flash based game that can be played on IE11/Chrome/Firefox and since FP17 in built-into those browsers, I have no trouble loading it. However when I try to run the game with Flash Projector, I get a "Version Loading Error". I believe this is happening since I do not have FP17 installed on my computer, just as an addon in my browsers. I currently have a Windows 8.1 desktop and I can't seem to find a download for FP17 off Adobe's website. This is the most recent link that the game uses to open.. http://www.realmofthemadgod.com/AGCLoader1424381358.swf .. Upon pasting this link into any of the three browsers listed above, the game launches near instantly. But when I launch this through Flash Projector, I get the error pasted in the image below. *Note "Hardware Acceleration" is enabled* Anyone have any ideas? Let me know if more specfic info is required.

I'd recommend downloading RotMG from Steam, this uses Adobe AIR and is supported by Wild Shadow Studios:
Realm of the Mad God on Steam
You can also run this full screen.

Using Flash Components in multiple SWCs inside AS-only project

Ok, this is a somewhat complicated issue dealing with SWCs and compilers. I've outlined steps to reproduce the problem below. I'm using the method outlined here to bring in Flash content to my project. I have 15-20 SWCs already, and it's working fine for those assets, the problem is specifically related to Flash's components (ComboBox, RadioButton etc.) If anyone has *any* advice on this, please let me know as we are completely stumped at this point!
The issue we're having involves using multiple external SWC files which contain AS3 components from Flash CS4. When two SWCs are linked to an ActionScript project (using Flash Builder 4 Beta (build 4.0.0)) there are collisions in the referenced classes which cause the most recently published SWC to knock out any duplicate classes in the other SWCs. A simple way to replicate this is as follows:
1. Create one FLA, called 'compA', drag one ComboBox, RadioButton and TextInput component onto the stage. Select all and convert to symbol, marking the symbol for export with a class name of Test1.
2. Create a second FLA, called 'compB', drag one ComboBox, Label and UIScrollbar onto the stage. Convert these to a symbol with a classname of 'Test2'.
3. Create a new ActionScript-only project in Flash Builder, called 'ComponentTest'.
4. Create a 'libs' folder in this new project. Select 'Project -> Properties -> ActionScript Build Path' and add the libs folder as a new SWC folder in the Library Path window.
5. Go back to compA.fla and right click the Test1 symbol in the library. Select 'Export SWC file...' and save it as compA.swc in the libs folder.
6. Do the same thing for compB.fla.
7. Edit ComponentTest.as and in the constructor, create an instance of Test1 and Test2, placing each on the stage.
8. Run the app, and the ComboBox will only be functional in one instance (whichever was published last.) The other ComboBox will behave like a MovieClip, cycling over the two frames in the stage asset (avatar and skin.) It will have no association to anything in the fl.* package.
Looking at the 'Referenced Libraries' in Flash Builder, compA may show it contains classes for the RadioButton and TextInput, but no ComboBox classes are referenced (sometimes it will show no classes at all, but this appears to be an unrelated bug with refreshing external libraries in Flash Builder.)
Unzipping the SWC files and examining their catalog.xml manifests shows all the necessary classes are listed (i.e. ComboBox is in both.)
Removing either SWC will cause the remaining one to work properly, so the problem appears to be in compiling the ComponentTest project which includes both.
Attempted Workarounds:
1. Create a new FLA, drag all components used in both files onto the stage and export a SWC called 'components.swc'. Add this SWC to the project's libs folder. In both compA and compB FLA files, add this SWC as an external library in the ActionScript 3.0 Publish settings. Re-export both SWCs. The theory is that the compiler will look for the required classes in the components.swc first, and thus not include them in the export, however this is not the case.
2. Same as above, deleting ComponentShim from both FLAs before exporting. The result is that no component classes are included, so all components act like MovieClips.
3. Add the Components source folder to the external library path of both FLAs, assuming the compiler will favor classpath references over compiled class references (ComponentShim). Same result.
Summary: We have been unable to find a way to use Flash Components in a project if they are referenced in more than one asset library. If we were able to import them once, and have all SWCs which need those classes use a single source, this might not be an issue, but the compiler does not appear to handle this (and we are admittedly not advanced enough to even know if this is possible.)

Hi!
I'm having the same problem. Any news on the matter?
Also, this looks like a very similar problem.
Best regards,
X_AmonPL.

Use flash charts from multiple base URLs

My APEX apps are hosted by a shared service provider who uses a front end proxy. Following the instructions in this forum, I was able to get flash charts to work by substituting my client URL for #HOST#.
Example, Change:
<embed src="#IMAGE_PREFIX#flashchart/
#CHART_TYPE#.swf?XMLFile=#HOST#apex_util.flash?p=&APP_ID.:5:&APP_SESSION.:FL
OW_FLASH_CHART_R#REGION_ID#"
to
<embed src="#IMAGE_PREFIX#flashchart/#CHART_TYPE#.swf?XMLFile=
http://mydomain.hostingcompany.com/pls/apex/apex_util.flash?p=&APP_ID.:5:&APP
_SESSION.:FLOW_FLASH_CHART_R#REGION_ID# "
I changed this base url in multiple locations in the chart source code and the charts now work.
THE PROBLEM
Users access the site via a public domain http://www.xyz.com. In order to get the charts to work I then need to change #HOST# to http://www.xyz.com/pls/apex. Then they no longer work when accessing via http://mydomain.hostingcompany.com/pls/apex.
Is there some way to get the charts to work irrespective of which path users take to get to the site?
ANOTHER PROBLEM
Though the above fix works for stand alone flash charts it does not work for the charts in interactive reports or the sample charts displayed when using the chart builder wizard in the application builder.
Is there somewhere to change in order to get the sample charts in the create chart wizard in application builder and/or the charts in interactive reports?

Hello,
Take a look at this thread -
Re: #HOST# variable at Flash chart region source
Which discusses the issue.
John.
http://jes.blogs.shellprompt.net
http://www.apex-evangelists.com

Flash Projector and Html together

Hello, what I want to do is to create a CD with a Website
that I have already done using html and flash. The problem is that
I want this CD to work in computers without Flash Player installed.
What if I create a flash projector movie that runs getUrl( )
and that html file contains flash animations, will people be able
to see them even if they do not have flash player installed?
Any ideas?
Thanks!
Raf

_RAF wrote:
> Hello, what I want to do is to create a CD with a
Website that I have already
> done using html and flash. The problem is that I want
this CD to work in
> computers without Flash Player installed.
> What if I create a flash projector movie that runs
getUrl( ) and that html
> file contains flash animations, will people be able to
see them even if they do
> not have flash player installed?
> Any ideas?
you can include the exe installer for the user.
Have the exe projector start, than ask whether they have or
not the player and
if they don't you could use fscommand exec to call it from cd
and install.
Macromedia allow downloads if the players for cd
distribution, you just need
to fill up a form to get the licensing which is an instant
process.
you could also have HTML with detection to check for the
player if they were
not sure whether is it or not install.
I have been doing the very same for years, flash projector as
splash screen
with all kind of add ons required for the CD, from flash
players to adobe reader
installer.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

CS4 Flash Projector in Mac OS X Lion

I sell products which run using Flash Projector that were created with the CS4 Flash Projector and am getting complaints that they no longer work on Mac OS X Lion. I've read the Adobe Knowledge Base article about known issues (http://kb2.adobe.com/cps/905/cpsid_90508.html) but Flash Projector is not mentioned. I cannot upgrade my Mac to Lion yet for various reasons, so I cannot test the problem. Can anyone shed some light on this issue?

Cor-el - - Thanks! this looks like it has some good clues, BUT, in following up, my Library doesn't show me any .plist with .mozilla. in the filename. Am running Mac OS X Lion (10.7.2). FYI - The Library is one of only four (4) folders in the root level on the system partition; the system partition being labeled, Mac Mini HD. These four folders are, Applications, Library, System, Users. Library folder has a subfolder named Preferences. None of the files therein has "mozilla" anywhere in the filename. Looking further, the System folder has its own subfolder labeled, Library! It has no subfolder, Preferences. Running a Finder Search on the Mac, and again on the Mac Mini HD (root folder), I get Zero (0) results with "org.mozilla.firefox.plist." Also, with Contains ".mozilla" and with Contains ".firefox.".
Will greatly appreciate a bit more hand-holding from you, if OK with you.
.

Center a flash projector on screen using actionscript 3

Hi ,
I notice when i launch my flash projector it is not centered on the screen. How do i make the projector centered according to the height and width of the screen?

Ned Murphy Thank you very Much .It is working .Great advice

Can flash handle multiple screens?

hi people,
need some advice please. I want to make an application that works on 2 screen.
on screen1 I need to make GUI with several buttons, sliders, radio buttons, field for dynamic text
on screen2 (big screen / LED / video projector) I want to output photos and simple vector animations that are controlled with GUI on screen1
I don't know if it is possible in Flash to have one output with GUI and other with content. Does Flash recognize multiple screen outputs? Is there an action script command to tell flash projector: this put on screen1 and this put on screen2
PS
I have been using flash when it was version 3. I stopped with MX version and haven't opened it for last 5 years.I was great in as1, ok with as2 but never read/write any command in as3. This is a big challenge for me
thanks in advance

I guess that the northcode link can be helpfull. I haven't looked at their products for quite a while, but I used to think, that they did excellent stuff. Without additional software, I think you could use the local.connection feature and two swfs - one for (remote)-control and one for display. I'm not sure about how to achive full full-screen and not loosing it when working on the controler, but there may be a solution with the help of a full-screen browser...
M

Outputting for multiple screens / projectors

Hello everyone
I am preparing a video installation that I would like to project through 3 projectors onto three walls side by side. I would like to slide video clips from one wall onto the next or even stretch one video footage onto all 3 walls. (with the effect that subjects from one wall glide onto the next wall without the audience perceiving any dividing lines)
How to do that? Doe anybody have experience with such set-ups? I was thinking that maybe I could define my project settings with a video frame that would have the hight of a standard 4:3 screen but its length would be 3 times as long. I then could insert three separate footages: one to the right, one in the center, and one on the left. - DOES THIS IDEA WORK?
and if it works, can I then just burn a simple DVD (using DVD studio pro)? What would be the final result: 3 small projections or one big image stretching (as intended) over the area of 3 walls/projectors?
I hope I could explain myself clearly enough! If my text seems vague, then it is because I can't really predict where during the production I could encounter problems. And it's good to start a new project with the right decisions.
thanks for your suggestions and help,
Hynek

I had the opportunity to talk to two video-artists and this is their solution:
*Matrox TripleHead2Go* http://www.matrox.com/graphics/en/gxm/products/th2go/
(The company offers different multiple screen solutions)
you then just edit your film on a 2160*576 Frame = 3*long normal Frame (720*576). Just make sure your pixel aspect ratio is the same as the imported video. I use a square pixel aspect ratio.
Nevertheless, thank you for your support!
Hynek

TS1702 how do i use microsoft word on my ipad? i cannot use flash on it as well neither do i use it with projector for presentation.

how can i use microsoft office on my ipad? i can't also use flash to copy and transfer documents into it and neither could i use it with a projector for presentation.

You can't use MS Office on the iPad as Microsoft haven't made app versions of their programs (you can only use apps that are in the iTunes app store on your computer and the App Store app on the iPad), but there are apps that support word, excel and powerpoint documents. The options include Apple's Pages app for Word documents, Numbers for Excel spreadsheets and Keynote for Powerpoint. And from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.
As to how you then get the file to your chosen app will depend upon what the app supports - different apps will have different ways of copying their content to/from a computer e.g. via the file sharing section at the bottom of the device's apps tab when connected to your computer's iTunes, via wifi, email, dropbox etc

How to re-size project using flash bulider to be the same size in all screens

Hi,
Im develop a chat project using flash bulider, my question is how i make sure that the porject when open from diffrent screens size no change,
becouse after i finish th chat project i publish on website later i discover this problem for example when i access project from screen have size 17 or 21
is work fine but in the same time i access from my notbook that him screen is 14 is not work and seems the project is mixed the webcamera no appear complete also other function dosent appear complete like sharescreen.
can some help guide me to find the way that i access the project whatever screen size is work fine and not mixed od disappear functions.
Thanks,

What email are you using?
The easiest way to send pictures is to use Apple's Mail.app that is part of the OS - it DOES NOT require a .Mac account.
If you are using a purely web-based email account, the File>Export method is the easiest.

Using Multiple Screens

Does anyone know if Premiere Elements 4.0 can be broken a part in components to use on multiple screens?

It all depends what you're wanting to do, t.
The quality of the output for both is indentical.
If you're wanting to edit, add titles, effects, transitions, keyframe effects, add motion paths across pictures and create DVDs, either program will work.
If you need embedded timelines, increased support for a wider range of media, broadcast functions for tuning color ranges and other professional features that I barely understand, you need Pro. And, if you plan to produce deep-level DVD menus, you may need Encore rather than Premiere Elements' basic DVD creator.
So it's up to you. There are many professionals using Premiere Elements. So it's kind of like Photoshop Elements vs. the full version of Photoshop -- if you don't understand the differences, you can probably get along fine with the consumer version.
As I've said, the quality of the results from the Elements and Pro versions are identical.

The settings box is always in the middle of my screen when using Flash Player , Won't close?

The settings box is always in the middle of my screen when using Flash Player , Won't close ?

See:How do I do a clean install of Flash Player?
It should work ok after that.

After using the minidisplay port to connect to a projector, my computer screen displays images with less resolution than before. How do I get back the usual sharp resolution?

After using the minidisplay port to connect to a projector, my computer screen does not have the usual sharp resolution. How do I get back that sharp resolution? The computer screen images are now a bit blurry.

Do you mean after the projector is disconnected? It should change back to normal after disconnecting. If it does not, go to System Preferences > Displays and move the resolution setting back to the largest number.

Black Screen when trying to view videos that use Flash Player

Hi all,
Sometimes when I'm trying to view videos on Youtube or BBC iPlayer, which use Flash Player, I'll click play and after around 2-3seconds of the video playing, my screen will go black/dark blue and the audio will stop. I'm then forced to hard reset my computer as no keyboard shortcuts work. This is starting to annoy me. Any help would be appreciated.
I have the latest Catalyst, 12.1, the latest Chipset and BIOS. I have even tried re-installing Windows to no avail. I have also tried uninstalling Adobe Flash Player using your official uninstaller and then re-installing and yet I still get this problem.
System Specs;
AMD-FX 4100 Quad Core Processor @ 3.6GHz
8GB Corsair 1333MHz RAM
320GB Samsung SpinPoint HDD
Powercolour Radeon HD 6870 1GB
ASUS M5A97 PRO Motherboard
OCZ Fatal1ty 750W PSU

Your video card should be fine for GPU acceleration, but to rule this out can you try disabling hardware acceleration to see if that helps?
How do I disable or enable hardware acceleration?
If this works, please open up a new bug report so we can take a further look. Here's a page that describes what we'll need.
How do I troubleshoot and report problems with Flash Player Video?
Thanks,
Chris

Using flash projector on multiple screens

Similar Messages

Maybe you are looking for