Using G42-360TX is very confuse..when I play the movie with media player the notebook will shutdown

using G42-360TX is very confuse..when I play the movie with media player the notebook will shutdown

Whoops, I responded on the wrong thread. I don't see a way to delete.

Similar Messages

When I play any video with any player, it stops after few minutes

When I want to play any video it stops after few minutes as freeze. Sometimes it continues without sound and others stops completly. I try to play it with more than one players, but same.
The video it's .mkv
I tried with:
- Quicktime X with Perian
- MplayerX
- Mplayer OS X Extended

You should probably take it to the closest apple retail store and have someone at the genuis bar help you. If you dont want to do that you should probably purchase a software or use a free trail version of one to run a virus check.Ive found that Mcfee is a good virus scan program.

In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?

In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?

Hi rhaughan,
I see that you have concerns about your operating temperature of your computer while using resource-heavy applications such as gaming applications. I have an article that will address some of the concerns you have mentioned:
Mac notebooks: Operating temperature - Apple Support
http://support.apple.com/en-is/HT201640
While there are third-party utilities that measure the temperature of a notebook computer, it is important to understand that these utilities are not measuring the external case temperature. The actual case temperature is much lower. Never use third-party applications to diagnose possible hardware issues—instead, contact Apple or go to an Apple Retail Store or Apple Authorized Service Provider.
You should also see this article for even further information about your fans:
Learn about the fans in your Mac - Apple Support
http://support.apple.com/en-is/HT202179
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Hello Simple problem - don,t know how to solve it. With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

Hello
Simple problem - don,t know how to solve it.
With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
I was like ????#$%?&*(???
Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! - is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
The problem is that scrolling is enable while clicking and it bugs.
How to disable it ??
Simple question - can't find the answer !

Helllooo !?
sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
Thanks !!

I made a slide show using imovie. When I play it back on my imac, the slideshow looks perfect. However when I burned in via iDVD and play the disc, the resolution drops off. The video appears fuzzy and not sharp. Any ideas why?

I made a slide show using imovie. When I play it back on my imac, the slide show is crystal clear and sharp. I burned a disc of the slide show using iDVD. When I played the dvd the resolution is very poor. Fuzzy and shakey images. I tried various solutions, Apple tec told me to go to preferences on iDVD and select "professional" to get higher resolution. Tried that but results still the same. Any ideas?

When you play on your Mac, you can have resolution up to 1920x1080.
When you burn to iDVD you convert to 640x480.

HT202667 Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get it transferred over from her Home Sharing account to mine so that I can use it with my PC?

Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get her Home Sharing account transferred over to mine so that I can use it with my PC? Thanks!

As Winston Churchill wrote, however you might want to do a factory reset on the Apple TV.
This way all information pertaining to your daughter will be removed from the device. Specifically if see was sign into any of the streaming service, Netflix, Hulu, etc. her credentials will still be associated with this Apple TV, doing a factory reset will remove all that and make it as if you purchased the device and just plugged it in.
regards

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error. I am running Mac OS 10.10.1. This only started happening when I installed the update of Adobe Acrobat.

Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave

I'm trying to hook up my Macbook Pro to my TV. I'm using the 'mini-display port to female HDMI" adapter. all i can see is my desktop background. no folders or icons and when i play a movie it goes blank.

I'm trying to hook up my Macbook Pro to my TV. I'm using the 'mini-display port to female HDMI" adapter. all i can see is my desktop background. no folders or icons and when i play a movie it goes blank.

Drag applications from your main desktop off the right side of the screen and they will appear on the TV. This is the extended desktop mode.
Regards,
Captfred

It is very annoying when I am at a favourite web site and Firefox will not automatically redirect to another page. It is so continuous and I have to "Allow" through the whole time I am at my favourite web sites

# Question
It is very annoying when I am at a favourite web site and Firefox will not automatically redirect to another page. It is so continuous and I have to "Allow" through the whole time I am at my favourite web sites.
Here is one of those sites:
http://conservatives4palin.com/

You can make it automatically redirect by doing this:
1. Go to: Tools > Options > Advanced > General
2. Untick the 'Warn me when websites try to redirect or reload the page' option
3. Click 'OK'
'''If this was the answer you were looking for, please click 'Solved' -- Thanks.'''

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

Commercial
Roxio Toast
<http://www.roxio.com/enu/products/toast/titanium/>
NTI DragonBurn
<http://www.ntidragonburn.com/en/us/product/dragon_burn.asp?>
Shareware or freeware
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
Disco
<http://discoapp.com/>
no longer supported, but free, simple, and runs well under SL.
LiquidCD
<http://www.maconnect.ch/>
free; iffy support, but, again, simple, and runs well under SL.
Burn
<http://burn-osx.sourceforge.net/Pages/English/home.html>
open source; not clear how active development and support are, but runs well under SL.
Terminal Whiz Kid
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
Use mkisofs to create the disc image, and burn it with hdiutil or drutil. (Some of the free options mentioned above actually use mkisofs.)

My iMac 27" becomes very very hot when i play games ..!!!!!! but nt in normal usage !!! wat do i do?, my iMac 27" becomes very very hot when i play games ..!!!!!! but nt in normal usage !!! wat do i do?

my iMac 27" ( the top right side of the imac) becomes very very hot when i play games ..!!!!!! but nt in normal usage !!! wat do i do?, my iMac 27" becomes very very hot when i play games ..!!!!!! but nt in normal usage !!! wat do i do? ...

my iMac 27" ( the top right side of the imac) becomes very very hot when i play games ..!!!!!! but nt in normal usage !!! wat do i do?, my iMac 27" becomes very very hot when i play games ..!!!!!! but nt in normal usage !!! wat do i do? ...

My Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

my Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

Have you just tried repairing with Disk Utility?
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

HT1296 When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

The music sync is one way - computer to iphone. The only exception is itunes purchases. File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to move everything to your new computer.

When I play a movie through iTunes, audio has no issues but video stutters and skips

Hey everyone,
I have a Dell 17R, Windows 8 64 bit, intel i7-3630QM at 2.4 GHZ, 8gb ram, Nvidia GT-650M at 1920x1080 using driver 320.49
When I play a movie in iTunes, the audio works flawlessly but the video will be smooth for a few seconds, stutter and then skip small 2-3 second spots. I haven't noticed that the parts skipped are any more graphically intense than other spots and there is no discernable pattern.
In the past, I have been able to play movies through iTunes with absolutely no problem but when I downloaded this most recent one a few days ago all of my movies have been experiencing the same issue.
When I stream other videos from other sources I do not experience the same problems as I do when I use iTunes. Streaming 1080P over youtube or a similar services is no issue.
I have updated my video drivers to the latest version as well.
I am at a loss, any suggestions would be appreciated.
Thanks!

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
-Griff W.

HT203175 Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, The movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Any ideas on a cure?

Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, the movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Does it with all movies in the library, Most where downloaded from Itunes. Any ideas on a cure?

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Using G42-360TX is very confuse..when I play the movie with media player the notebook will shutdown

Similar Messages

Maybe you are looking for