Using HttpSupport library for SSL with User Id/Password

Does anybody know how to use UDS HttpSupport library for SSL connection which requires user id and password?
Got no problem so far in getting pages using https and HttpBaseRequest but can't figure out how to setup user id and password for logging in to server. Have tried https://userid:password@server/... but UDS treated password@server as the port!
Any help is appreciated.

I assume you mean that you need to provide the password needed for a certificate for SSL authentication.
For both client and server, these are configuration items.
If you want to do HTTP authorization, which is not related to SSL, you should use the Authorization and WWW-Authenticate (in a 401 response) to get a user name and password to the server.

Similar Messages

I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, Beba

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

Can I use RS232 library for RS485 communication? Alternatively, can I use NI Serial with non-NI 485 boards?

Hi-
I have successfully used RS232 library to communicate with one RS485 device. I now have multiple devices using the same Rx and Tx lines. Three of the 4 devices have their own dll and can communicate effectively despite each other. My problem occurs when the one device I am talking to using the RS232 library now has to share the lines with the other devices. Are there any ways around this? All I can think of is to see if I can use the NI Serial library commands with my non-NI PCIe card. OR, buy the NI 485/422 card and use the NI Serial commands. Any other suggestions?
Thanks.

The fundamanetal difference between RS232 and RS485 is the ability to connect to multoiple devices. The devices also normally work in a "speak only when spoken to" mode and this is achieve by adding a device address in the protocol. The NI serial library is oblivious to most of this and doesn't care if it's RS232 or RS485. The problem with your 232 device is that it will speak everytime when any other device is adddressed, so you should make it comply to 485 standards. This can be done with RS232 to RS485 convertors. You can do a search on Google for this. The ones I use and have the least amount of problems with is either from Advantech (<http://www.advantech.com/products/search.aspx?keyword=RS-232#search> and <http://www.advantech.com/products/search.aspx?keyword=RS-232#search>) or BB Electronics. (<http://www.bb-elec.com/Products/Serial-Connectivity/Serial-Converters/Port-Powered-RS-232-to-RS-485-...>)
Best Regards
Jattie van der Linde
Engineering Manager, Software & Automation
TEL Magnetic Solutions Ltd

I tied to sync my ipod to the itunes but, the apps wont sync it just says the apps will be replaced with the ones on the itunes library,but there isnt any apps on there, i deleted all the apps after i use to use the library for my old iphone helpp\!!!!!!!

i tied to sync my ipod to the itunes but, the apps wont sync it just says the apps will be replaced with the ones on the itunes library,but there isnt any apps on there, i deleted all the apps after i use to use the library for my old iphone helpp, the ipod used to be synced with a another i tunes libary that i have deleted now

See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
or
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek
You can only sync with one ITunes library. It you switch iTunes library iTunes will erase the iPod and replace it contents with what is in the library of the new computer.

HT201365 hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me

hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]

First, we're not Apple here (Apple does not participate in this forum). We're only users like you.
The previous owner has not given you the correct ID and password for you to use.
If the iphone has iOS version 7, then read through the following...
http://support.apple.com/kb/HT5818

Hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade

hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
iPhone 4S

oenkz33 wrote:
this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks.

Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

Hi,
Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign 2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
IP for communicating with the CAS server which is in a different domain.?
Details:
1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
Thanks
Rajesh Vasudevan

First, it's not possible. You cannot attach a primary site to an existing CAS.
Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
no functional differences but does add complexity, latency, and additional failure points.
Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
for trouble IMO.
Jason | http://blog.configmgrftw.com | @jasonsandys

securityagent name when using IBM TAM for SSO with Hyerion

Hi,
What should we declare in the css_config.xml file for the <securityagent>, when using IBM TAM for SSO with Hyperion.
The admin guide only mentions Netegrity, but that would be the case when we use Siteminder for SSO.
Any lights??
Thanks,
Sasi

While, seems one way is to use stream to bypass login.

My sprint service is off. How can I still use that number for iMessage with wifi instead of my apple id

My sprint service is off. How can I still use that number for iMessage with wifi instead of my apple id?

You can't. You can only use that number if you have active service.

SOAP Envelope with user id password

Hi Everyone,
I want to authenticate the sender with user id/password in soap envelope. Does anybody know the xml format for SAP PI7.11.
Regards
Inder

Ths for responding Baskar.
I already provided wsdl to them. They are still asking me about how can they can authenticate themseleve,
Even if i am using SSL, they still need to provide userid/pswd with appluser role to be able to send data to PI. Only thing with ssl will be that everything will be encrypted.
I dont want to switch off Basic authentication for all soap adapters. Can we switch off authentication for particular soap interface in enterprise repository.
Is it possible that when i use ssl certificate, Pi dnt ask for any user id or password. ?
Regards
Inder

Authentification with user and password

hello experts,
Someone knows, what steps are necessary to carry out in XI for Authentification with user and pasword in SOAP adapter receiver?.
It's necesary put something in visual administrator?
thanks for all

user/pwd need to be provided by the Soap client. You'll need to store it there and maintain whenever the pwd is changed in XI.
As of best practices:
- The minimum requirements here should be SSL, so that no one can get the pwd;
- Also, as to avoid this, you could take a look at client authentication with certificates.
Regards,
Henrique.

When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

Hi
When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

When you (or someone) first switched on your computer, you (or someone) had to choose a password. This protects your computer, and you need it to install most software or change the system. We can't help you if you forget it, sorry.

My iPad 4 tried to open application but repeatedly iCloud asked for login with apple id password. I put my apple id password correct,even i reset it again but still it does not accept in iPad .i am bored with this 3rd class application.please help

My iPad 4 tried to open application but repeatedly iCloud asked for login with apple id password. I put my apple id password correctly,even i reset it again but still it does not accepted in iPad .i am bored with this class application.please help.After every 1 second icloud logoin asked.

Find Apple ID
https://iforgot.apple.com/applied
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Can't access a school web site that I've used for years-can't log in with user and password. All other bookmarks are fine-tried several things including re-install-Other browsers are O.K.

I have an iMac-have used Firefox exclusively for years. I can't access a school web site-can't get past the log in with user ID and password. Screen stays at log in screen. Tried clearing history-tried uninstall and re-install. All other web sites/bookmarks work fine. Thanks in advance.

Try clearing the cache and deleting cookies for the site, this can sometimes resolve problems accessing sites that used to work. See [[how to clear the cache]] and [[deleting cookies]] for details.

How do I use one library for multiple iPods

I have three girls that recently got iPod nano's. I would like to use only one library for their music etc. How do I do this. when I installed the first one it worked great. Then when I installed the second one it won't recognize the first one. Then when I went back to factory settings on the first and synched her music the second one is not recognized. Help......

Sorry, guess I am not using the "technical lingo". I already had itunes on my computer for a medical review course that I purchased to study for a certification exam. When nano #1 was purchased I hooked it up, registered it, and synched music to it. When my daughter tried to play songs, the songs titles and songs were mixed (song didn't match title). I hooked it up to the computer. It said it needed to be formatted. So I did and reregistered and synced the songs back on. Everything ok. Second nano hooked up, registered, named different name than #1, synched with the music she wanted. Tried to hook up #1 and it didn't recognize the nano. I went to the website and found out how to "find" it on the computer, followed the instructions to find it, and again it had to be "formatted" to have it recognized. I was again able to sync her music. Will I have to do this everytime I try to sync more music? that could be a real pain!
thanks for any help for this sometimes electronically challenged mom.

Using HttpSupport library for SSL with User Id/Password

Similar Messages

Maybe you are looking for