Using In Design on a MAC printing to a Canon MFP to make 8.5 X 5.5 Booklets. My design is 8.5 X 5.5

Using In Design on a MAC printing to a Canon MFP to make 8.5 X 5.5 Booklets. My design is 8.5 X 5.5 but the result when it prints is a reduced image of the pages. Any thoughts?

Is the printing size reduced about what the non-printable margins of the printer are? If so, then the option would be to print to over-sized paper and trim.
Mike

Similar Messages

When i try to AirPrint, the only option i get is 4 x 6 and there seems to be no way to change it. Is there a setting that I am not seeing? (using iMac w/ Yosemite.)The printer is a Canon MG7520.

i had many problems setting this printer (Canon MX7520) with my Mac so i don't want to reset the settings since I got most of them to work now. However, now it seems that whenever i try to AirPrint a document, it wants to print to 4x6 (photo) paper and not the regular paper. I have tried everything i can think of, but nothing seems to work. if you have any suggestions, i would be very grateful.

ok...I'm only talking about printing from an iOs device. The first time I set up the printer, all the documents printed to regular paper (tray #2) and photos would print to the 4 x 6 tray (tray #1.) However, there were other problems with the printer so I reset everything. Now when I 'AirPrint', it prints all documents to the 4 x 6 tray (tray #1). Something has been changed, but I'm not sure how nor how to fix it.

Printing to a Canon pro 9000 mark ii from creative cloud products

I am using Windows 8 and trying to print to a Canon pro 9000 Mk ii printer from Photoshop, Illustrator and InDesign. I am a register creative cloud user and have the latest drivers for the printer. I am using official inks and Canon papers. I just cannot get colours to print properly, the colours are too dark with a blue cast I recently changed to this printer from an old Epson 1290 that had good colour reproduction (for its age and that it was just a two cartridge system). At first I thought it was a problem with the printer, but after printing with several other programs I soon realised that this is an adobe problem exclusively!
Has anyone got a clue to what I am doing wrong or if there is a way of getting the adobe products to play nicely with the printer?
Thank you in advance,
Jeremy

Wildpaintings for color management issues you may want to consider posting your inquiry in the forum specific to the software you are facing difficulties with. Most likely you will either need to disable printer color management in the Adobe applications, if you wish to use the Canon Pro's color management, or disable the Canon Pro's color management.
The specifics on how to do this though is going to vary by application. I would recommend posting your inquiries to the following forums:
Photoshop General Discussion - http://forums.adobe.com/community/photoshop
InDesign - http://forums.adobe.com/community/indesign
Illustrator - http://forums.adobe.com/community/illustrator

Why cant i print from my ipad using airport express but i can print from my mac using the express

why cant i print from my ipad using airport express but i can print from my mac using the express

Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

Anything printed using Bonjour from Windows to Mac is very light in color

I dont get this at all. And it only started happening very recently. When using my printer connected to my Mac, and printing from my Windows Vista laptop (using Bonjour of course), all of the colors are very light. Black text is light grey, and all of the other colors are very washed out. I have no idea whats going on here. My printer is a Canon MP160.
Any help would be extremely appreciated.
Message was edited by: Zeddy

I have the same problem after I updated to 10.5.5 yesterday. My Canon MP 780 works perfectly printing from my mac and all the networked macs in the house. When I connect the printer to Vista (on my mac) running in Parallels directly (by checking my printer in "Devices- USB"), it works perfectly; but when I try to print networked from Vista via Bonjour, it uses blue ink for text. Prior to the update it printed perfectly without having to connect it to Parallels.

I have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they r printed?

i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?

why can't you use the keyboard the way it is printed?

How do I preserve the embedded hyperlinks when printing to .pdf?   I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it's just the flick of the right button – I just need help finding that

How do I preserve the embedded hyperlinks when printing to .pdf?
I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it’s just the flick of the right button – I just need help finding that button.
Can you help? Thanks!

How: MS Word to .pdf by Command P, hitting the PDF button, and then the button for "save as Adobe pdf"
I didn't have this problem at all on prior versions of Adobe on my PC.   This isn't a Mac attack, is it?

Mac printing - "printer is in use" forever

On or about Dec 30, 2014, my MacBook (MacOS 10.8.5) suddenly could not print to either my HP Officejet 6100 or Deskjet 6980, via network printing. Both printer queues would show "printer is in use" forever, when any document is printed.
I did the usual removing the printer, and re-adding. I added the printer as an IP address in System Preferences, with Protocol Line Printer Daemon - LPD, and with protocol Internet Printing Protocol. Upon clicking Add, I get the error box:
Unable to verify the printer on your network. Unable to connect to 10.x.x.x due to an error.
If I go ahead and Add, same result "printer is in use" for any doc printed, and nothing prints.
If I Add the printer despite the error above, then select the printer in System Preferences - Printers, Utility, Open Printer Utility, the HP utility runs fine and connects to the printer!! The HP utility shows supply level. The Test page prints fine!!
I even re-installed MacOS 10.8.5 - no help. I also updated the Officejet 6100 firmware from the hp.com page - no help.
Finally by luck I tried MacOS System preferences, Add, IP, Protocol: HP Jetdirect - Socket, and now the printers are working again!
Come on HP, you need to give a little more help here. It should not be so hard to get an HP printer working under MacOS.
Clearly you changed something and Software Updates sabotaged me here.
Please consider testing Internet Printing Protocol and LPD protocol under MacOS.

I collected some potential troubleshooting steps for Yosemite (10.10.x), but it may equally apply to your version of os.
Please refer to Possible solutions for Yosemite printing issues.
Regards,
Eric
I am an HP employee.

HT1338 can I use epson 2880 with my mac book pro? 10.9.2

can I use epson 2880 with my mac book pro? 10.9.2

Epson names their printers (in addition to numbers). What is your printer designation?
http://support.apple.com/kb/HT3669#epson
Barry

PSE6 Mac Printing Colours darker than PSE4 - Adobe accepts problem !Help!

*PSE6 Mac Printing Colours darker than PSE4 - Adobe accepts fault*
My work requires that when I create prints for artists I must replicate all the prints exactly everytime. It worked perfectly from PSE2, PSE3 and PSE4 but now......
I am unable to replicate quality of printing on MACOSX PSE6. it works great on PSE4. I mailed some printed images on art paper to adobe in amsterdam and a cd with the same images. After weeks of discussions phone, email and after testing using their work flow....they came back with some answers.
Finally a couple of replies from Adobe re colour problems and they have accepted that they are double managing the image and that I should use printer management to do the colour conversion.. here are their two replies and the comment that they will now drop me until???????   
Answer #1   Your Customer Service Number is: 129800224   Thank you for contacting Adobe Technical Support.   After consulting with my colleagues about the issue you raised, I can let you know the following:   The issue is both on our as well as the driver software side and the workaround we have given is the best available at this time. This issue is affecting all printers, not just Epson or Canon.   The soft proofing effect that you are seeing in the print preview is indeed an attempt at soft proofing. However since Photoshop Elements managed prints are incorrectly double colour managed it is not as useful as it was initially designed.   As to the exact details of why this occurred, we have no official information.   We believe that this will resolve the issues you are experiencing, however, should the reply not help solve the problem, please contact us again, quoting the case number given above, and we will re-open the case.
  Answer # 2  Subject: Re: Adobe TS #180107025 / Mario / PSE6 oversaturated Print (KMM3793441I51L0KM)   Dear Mr. Laugesen,   We have had word back from our engineers regarding your issue.   The Photoshop Elements team are aware of the problem and are working with Apple and the printer manufacturers to get this to work correctly. In the meantime, the only workaround is to switch off colour management in Photoshop Elements and let the printer handle the colour management.   Unfortunately we can not make an estimation as to when a fix will be provided. We will close the case for the time being as there really is nothing more we can do about this issue besides offering the suggested workaround. Closing this case does not mean that the research will stop however and the engineers are working on a solution to this.

finally fixed With PSE9

How do I set up the system to print 4x6 labels via paypal and ebay using a DYMO 4XL Thermal Label Printer (through airport)?

We bought a DYMO Label Writer 4XL. We want to print thermal labels from our Mac and PC, wireless. The good thing is that I already have the printer set in the network and added on each of our computers (Mac and Windows 8). For printing regular labels you can use the Dymo software; for printing postage labels from ebay or paypal has been impossible.
From ebay I even tried one label at the time but still did not work. I sent the the print command from the mac-print-window, changing each of the settings (such as paper size) but did not work. Each time (no matter if you want to print one label only) it advances more than one lable.
http://community.ebay.com/t5/Miscellaneous/Using-a-thermal-printer-for-eBay-labe ls-using-a-Mac/qaq-p/3135261 (post by stormshock)
Through Paypal is a different story. It should be easy cause it seems the Zebra Driver in Paypal works with this DYMO. The issue is how to get the system to send the print command to the DYMO printer through the Zebra LP2488? please help! I know some people have succeded making all these work. What am I missing?
http://www.amazon.com/review/R3E73A6ZX39ZZQ/ref=cm_cr_pr_cmt?ie=UTF8&ASIN=B002M1 LGJ4&linkCode=&nodeID=&tag=#wasThisHelpful

To whomever is reading this post I just wanted to let you know I returned the Dymo 4XL. Their customer service is horrible. Technical support does not exist at all. The issue was extremely frustrating and time consuming. I do not recommend this thermal printer at all. Good luck finding one... if you do, please share.

Some of the times when I print a document from the internet using my Adobe Acrobat 8 Pro printer, the letters appear in the PDF as symbols, How do I correct the problem?

On many documents that I try and print from the internet such as receipts, conformations, etc, using my Adobe Acrobat 8 Professional printer, the PDF shows some if not all the letters as symbols. I think it might be font issue, but do not know how to fix the problem. Any suggestions.
On another issue, can a Tiff file of my signature be inserted in a PDF?

Hello,
For 1st issue please follow the steps in given article:
Missing or Garbled Text Printing from IE9 to Adobe PDF Printer
For 2nd issue:
You can create a signature appearance:
For example, you can include your scanned signature.
1 (Optional) Save the desired image on a page by itself, and convert the page to PDF.
2 Choose Edit > Preferences (Windows) or Acrobat (Mac OS) > Preferences, and select Security.
3 Click New, and type a title.
4 (Optional) Select Imported Graphic, click File, and select the desired file.
5 Specify options as desired.
Regards,
Anoop

MS office 2008 now crashing when we try to print. No changes to computer; same old software. New printer 9 months ago, no trouble printing until last month. Other programs (adobe, mac) print fine. What can I try?

I have an iMac from 2009. It's running OSX 10.6.8 and we've used MS Office 2008 for Mac all along without any trouble. We replaced our printer 8 or 9 months ago, and we've had no trouble printing from any program until the last several weeks. Now, when we try to print ONLY from word or excel, the print window appears, but then the spinning rainbow comes up, followed by a Microsoft crash message: "Microsoft Word has encountered a problem and needs to close. We are sorry for the inconvenience." I tried to trick it into making a PDF, but the crash comes too fast. The only change to our entire Mac ecosystem is the following: We also have a Macbook Pro that has the 2nd allowed installation of the same MS Office 2008 for Mac. Due to liquid damage 6 weeks ago, that computer was replaced and all of the data and applications were moved from the dead one to the new one. Could this possibly be because microsoft detects a "third" computer "using" its software? I'm guessing no because I've seen several threads about problems similar to mine, and none mention licensing issues. In terms of troubleshooting, I've shut down, unplugged, restarted and tried newly created docs as well as old ones. Same results, no matter what.

http://answers.microsoft.com/en-us/mac/forum/macoffice2008?tab=Threads
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

I have a Lexmark Prevail Pro 705 printer connected to my network wirelessly. I can no longer scan from it using Image Capture. I can print to it. I can scan from it using a Windows machine. Most updated firmware. Driver v 11.0 Any ideas?

I have a Lexmark Prevail Pro 705. Latest (as of july 30, 2012) firmware. Mac driver v 11.0
I can no longer communicate wirelessly with the scan feature of the printer. I can print no problem using a wireless connection. Using a window's machine I can scan wirelessly from the printer. It seems that my iMac (OSX 10.8, 3.06 Ghz Intel Core 2 Duo, 24inch early 2009) is not connecting to it. I can put a USB cord into the computer and scan.
Any ideas? This came up starting 2 weeks ago. I had hoped the operating system upgrade would solve it. It has not. I see nothing on the Lexmark boards about this. Since the printer works fine in both print an scan mode using a windows machine and can print fine from a Mac but not scan I don't have any ideas but I suspect it is the Mac.

Repair your disk permission: http://bit.ly/OeD7U3.
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website www.lexmark.com
Run firmware update http://bit.ly/AcNqbg
Reset printing system http://support.apple.com/kb/HT1341

Using In Design on a MAC printing to a Canon MFP to make 8.5 X 5.5 Booklets. My design is 8.5 X 5.5

Similar Messages

Maybe you are looking for