Using ITS embedded to access UWL and webgui on EP6
I've installed a WebAS 6.40 Java System and EP6 on Windows2003. Both I've upgraded to SP11.
I read a paper that on WebAS 6.40 version it's not necessary to install ITS to Portal runs WebGUI and connects to UWL because there are a ITS version embedded on WebAS 6.40.
Is that true? How can I activate this ITS embedded to use webgui and to connect UWL on EP6?
Thanks,
Andre
Hi Andre,
WAS 6.40 ABAP stack delivers the integrated ITS and SAP GUI for HTML as one of its services. You need to do some initial config however to enable it. You can find more info on the setup and configuration at http://help.sap.com/saphelp_nw04/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm
With regards to UWL, you can do the connection and preview all the work items without SAP GUI for HTML (~=WebGUI). SAP GUI for HTML kicks in only if you need to execute work items which launch SAP transactions or reports, plain user decisions don't require webgui.
The UWL config guide is available at http://service.sap.com/netweaver -> Media Library -> How-to Guides -> Portal, KM and Collaboration -> All -> Configuring the Universal Worklist.
Hope this helps,
-Mikko
Similar Messages
-
Revision: 13113
Revision: 13113
Author: [email protected]
Date: 2009-12-21 01:08:10 -0800 (Mon, 21 Dec 2009)
Log Message:
Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.
Modified Paths:
osmf/trunk/libs/ChromeLibrary/.flexLibProperties
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/ScrubBar.as
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/URLInput.as
Added Paths:
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/Fonts.as
Removed Paths:
osmf/trunk/libs/ChromeLibrary/assets/images/stop_up.png_1Your site was built using tables, whose sizes are defined in your site.
If we look at your first table definition, we can see:
<table width="861" height="1449" border="3" cellpadding="0" cellspacing="0" bordercolor="#868787">
Your table has a width of 861 pixels and an overall height of 1449 pixels. Anything you put into that overall box must fit those dimensions, else
it won't be visible. Anything you add above it will push everything down. You can redefine your sizing to let you edit more inside of the table elements.
This is why, when you type in more text, things act weird. If you are in Dreamweaver, you must find the right cell to put your text into and then enter
text there. Unfortunately, this is going to push things around, which were all lined up using tables. And this gets everything offset with respect to
everything else in your website.
And that is why everyone is saying, "Start Over!"
I just inherited a website that has been put together using tables. I'm going to have to expend considerable effort in rewriting the entire design of the
website because of that. because everything I intend to add to the pages on the site is going to need to be deconstructed in order to get it to work
properly if I'm adding text and pictures that need to line up with each other.
You need something done quick and dirty and the only way I can recommend you do that is to use Dreamweaver to show you the tables you have
and put what you need in a new table that is defined above or below the tables you all ready have defined. Do that and then get back to someone here
who knows how to make a website correctly to clean up your entire website and make it editable -- which will cost you some money, but it will be
money well-spent.
I like to quote this maxim: Good, Fast, Cheap. Pick any two. This works for website design. You can get it fast and cheap, but it won't be good. I
think you may have chosen that route. -
How to use java connecter to access Mainframe and ERP applications from EJB?
yea. its just a desktop chess application.
my IP changes and im behind a router so its hard to
get
connections to my computer. i figured i could have a
central
server to manage the connections online.
and later maybe having other applications running on
the website that people can connect to.Well now I am more confused...
Here are the options.
1) If you want to run your service program on a server you're going to need some sort of virtual server hosting package. When people say Java hosting they usually mean Servlet/JSP hosting in a Servlet/JSP engine/container.
But this does not appear to be what you need. You appear to need to be able to just run whatever you want. There are virtual server hosting packages out there for fairly cheap... although as always a caveat in that you tend to get what you pay for.
2) You could just have a website with a servlet (not neccessarily Java could be ASp or PHP or whatever you like) acting as a webservice. You could send your IP of your server to the service. Then clients requesting a connection would get the current IP from your webservice.
3) You could do like (2) but without the webserver, use DNS instead. There are some services for providing DNS for dynamic IP's about.
It should be noted that if you want to do applets then probably based on your description you will need to sign them. Generally speaking applets can only connect to the server from where they were downloaded from. -
We are having trouble using our Iphone with the Bluetooth system in our 2012 Highlander. When I am driving and my wife, using her Iphone, uses Google and types in anything at all, letters of numbers, it activates the phone on our Navigation system and initiates a call. It goes away after a few seconds, but happens every time.
No problem pairing the phone with the car's bluetooth, and no problems making calls.
Just returned from our Toyota dealer, who had no answers.
Can anyone help on this?
Thanks in advance!Thank you for the response.
This happens when I am driving, and my wife, using her Iphone, accesses Google.com. Once she is on the web site, and she types in her search, it activates the phone on the Navi system, and the screen on the navi system says "talking".
I have a Blackberry, and it is also paired with the car, but we make sure only my wife's Iphone is connected when the happens.
THANK YOU! -
Flash won't run, says its not loaded, when its embedded on samsung tablet and Windows 8.
On samsung tablet 500T windows 8 flash is embedded. It says when I try to run flash that it is not loaded. I followed all of the help and made sure all of the settings are correct. It still will not run. The only error is that it is NOT LOADED to download it from adobe.
DougHmm, have you verified that active x filtering is not enabled? You've probably tried the steps outlined here but take a look just in case.
Enabling Flash Player in Internet Explorer
ActiveX Filtering in Internet Explorer -
Compiling code for LPC2378 Target using LV Embedded
Hi
I am using LabVIEW embedded for ARM 10 and using MCB2370 evaluation board. I did my evaluation successfully but now when I tried to compile the same code for an lpc2378 target (tier 2), I am getting "Error: Application is too large for target memory. Status: Build failed."
I am only doing serial communication using com 0 and using no other peripherals that are custumized for MCB2300 target.
what should I do to resolve this issue?
thanks and regards!
ManiHi scg,
I took a look at your file and researched a little bit about your issue, I have not been so lucky with the research since most of the doceuments are related to previous versions of the software, nevertheless it is also what makes me think that the file might be corrupted or some issue related to it so and I have found some tests that you could try:
1. Create a new FPGA file with your code on it and compile it again.
2. Turn off the firewall and compile again
3. Restart the compiler Services
Hope you might find this information helpful!
Regards,
S.Jimenez -
Problems in accessing UWL Items - Using SAP r/3 4.7 with External ITS
Hi,
When i am trying to open the Tasks in UWL, the Tasks which are calling any Tcode are giving blank page and some Tasks are opening but the Attachments in that Tasks are not opening.
Tasks and Attachments are pointing to:
1) http://vq2wk.corio.com:81/scripts/wgate/webgui/!?%7Etransaction=*SWK3+P_INSTID%3D0030000063%3BP_TYPEID%3DZSDQUOTE%3BP_CATID%3DBO%3BDYNP_OKCODE%3DONLI%3B&%7Eokcode=ONLI&%7Eclient=120&%7Elanguage=en&%7Eaccessibility=0
2) http://vq2wk.corio.com:81/scripts/wgate/webgui/!?%7Etransaction=*SWK1+p_nosecm%3DX%3Bwi_id%3D000000156456%3B&%7Eclient=120&%7Elanguage=en&%7Eaccessibility=0
All the Connections (RFC, SSO, SLD) and WebGui Tcodes with External ITS are working fine.
Could any one please suggest me that i am missing any more configuration or any authorizations. Else any Session Managment needs to be done.
Some times it is showing "/!Session not fall-safe/!\" in the status bar.
Thanks in Advance.
Regards,
Sridhar.I already checked in SMLT tcode ,My system is MDMP .I passed that error and now I am getting this
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(GSI) INFO: dbname = "D3320110118070143 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "SAPTST2K3E32 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SAPTST2K3E32"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "2x Intel 80686 (Mod 29 Step 1)"
(VK) ERROR: invalid migration key
E:\usr\sap\D33\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\D33\SYS\exe\run/R3load.exe: END OF LOG: 20110118215221
any idea on this?? -
Firefox is a very busy piece of software. It's using large amounts of CPU time and disk access. It puts my usage at low priority, so I have to wait for some time to be able to use my pointer or keyboard. I don't know what it uses all that CPU and disk access time for, but it's of no use to me. It often takes off with massive use of resources when I'm not doing anything, and I may not have use of my pointer for several minutes. How can I shut down most of this so I can use the browser to get my work done. I just want to use the web site access part of the software, and drop all the extra. I don't want Firefox to be able to recover after a crash. I just want to browse with a minimum of interference from Firefox. I would think that this is the most commonly asked question.
Firefox consumes a lot of CPU resources
* https://support.mozilla.com/en-US/kb/Firefox%20consumes%20a%20lot%20of%20CPU%20resources
High memory usage
* https://support.mozilla.com/en-US/kb/High%20memory%20usage
Check and tell if its working. -
I lived in the US for a few years, spent a fortune on iTunes [my then local Apple ID account]. Now I live in South Africa and want to use Match. I have a local credit card but how do I use my new / 2nd Apple ID and gain access to all my US music??
You have to be in a country to use its store - you will need to be in the US and have a US billing address on your account to be able to use the US store (that applies to buying and redownloading).
You can use iTunes Match in South Africa, do you not have a backup copy of all of your US iTunes purchases so that you can subscribe to it and upload those that aren't in the South African store to it ? -
Using an embedded driver instead of client, and refreshing JList
I am finishing up a simple database interface program that I need to do in order to graduate. There are a couple issues I need to address.
1. This program is meant to be on one computer with one connection to a database. Currently, when I build the program and run the .jar file, it will not work unless I have manually started the server in Netbeans. Once the server is on, it works like a champ. But since I have to send this to my professor it must work without him doing any additional setup. For this I figured I could use the embeddedDriver, but unfortantely I cant get that to work.
In netbeans I can right click on the main database icon and select "New Connection" and i have the option of choosing the embedded driver yet when i put the database name in and the user and password it gives me the
error: "Unable to add connection. Cannot establish a connection to jdbc:derby:MaxxTrax using org.apache.derby.jdbc.EmbeddedDriver (Database 'MaxxTrax' not found).
Why is it that I can use the client driver without a problem yet not the embedded one? And if I cant use the embedded one, how can I set up the client driver so it will automatically start the server (does the end user need to have the server installed or will the clean and build do that)?
2. Using the netbeans gui builder, i created a jList that I bound to my database's name query. I then have multiple textFields that i bound to whatever jList selection there is and tell it to update with the specified data. My problem is, that I cannot get the jList to "refresh". Right now when I add somebody to the database it visually writes over another persons record, but doesn't actually delete record. So if i could just figure out how to make it look at the database again I could do it automatically after entering in a new record. I've tried nameList.validate(), updateUI() and even tried to copy the ide generated code that actually binds the data but no go.
Once I get these two little things taken care of I am done!! Please help, its greatly appreciated.I'm not getting much help out there.....anyone??
I need to make the database seem invisible to the end user application.
When I try to use an embedded driver I keep getting errors. In netbeans, I can see the "Java DB(Embedded)" link under drivers, and when I hit connect using.. I input all the correct data and it gives me the following error:
Error: Unable to add connection. Cannot establish a connection to jdbc:derby:MaxxTrax using org.apache.derby.jdbc.EmbeddedDriver (Database 'MaxxTrax' not found).
Under the Database setting the pointer for the java db installation and database location are correct. Why can't I connect using the embedded driver, cause using that would make my life so much easier for a single application. -
I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Use N95 as access point and get laptop inet throug...
Is it possible to use the N95 as an (WIFI) access point and use a laptop, a psp, an ipod touch to access the internet through 3G or even Turbo 3G?
That would be really really cool!
Regards
RaptorI dont think it is as would have to be connected through a router to a phone line anyway. My psp doesn't even detect my N95. You would have to use it as a bluetooth modem and 3g.
Its not who i am underneath. But what i do that defines me.
You are here for a reason Superman.
"Come to me son of Jor-EL. KNEEL BEFORE ZOD" -
Hii everyone,I am using mac os 10.8.3 and its getting not responding every time.
Hii guys ,I am using ma os 10.8.3 and my finder is getting not responding all the time ,I can hardly use the finder for 2 min and it gets jammed.after a few days vlc player,then safari and its continuing .Now i even cant open the Launch pad and the applications are not even visible to me..
I tried all the possibilities like Pram set ,repairing the disks and every sort of process i know .so please help me out with itPlease read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Accessing bean using its Local interface
Hi,
I have a problem accessing a bean using its local interface in J2EE1.3 environment on J2EE test server. I have two beans, one trying to access other, residing in two different ears. During deployment, after I select "Local" interface option in EJB-refs tag of the standard deployment tool of J2ee, it does not show me the bean-name in the "Enterprise Bean Name" combo-box. When I put the name of the actual bean in the box and try to deploy it, gives the null-pointer exception for the above tag as it does not find the corresponding ejb to be referred.
Is it necessary to have a client bean and actual bean to be in the same ear for local interface access? The specifications says that both the beans must be in the same container that does not mean same ear, right????
Thanksi am having the exact same problem now.
did anyone solve this.(you can email [email protected]) -
When should a subclass have its own fields and when should it use its super
When should a subclass have its own fields and when should it use its superclass' fields?
Hi, thank you for reading this post!
Let me use a specific example to ask my question.
public class BankAccount {
private double accountBalance;
public double getBalance() {
return this.accountBalance;
public class SavingsAccount extends BankAccount {
private double accountBalance;
public double getBalance() {
return this.accountBalance;
}In the bank account example, both BankAccount and SavingsAccount will have a method getBalance(). Therefore, they
both require a account balance field. My question is since getBalance() for both classes will perform the exact same
operation, when should I omit declaring the getBalance() method and the accountBalance field in the subclass, and
when should I include them?
My own thought is when we never have to instantiate a superclass object (e.g. an abstract class), then we place
common fields in the abstract superclass and have subclasses access these fields via protected getter/setters to
access the superclass' fields. This is the principle of reuse.
But when you do need to instantiate a superclass and the superclass does need to maintain its own fields, then
I would need to duplicate the accountBalance field and getBalance() method in the subclass.
Is my thinking correct or incorrect?
Thank you in advance for your help!
Eric
Edited by: er**** on 22-Aug-2011 20:19er**** wrote:
If SavingsAccount inherit BankAccount.getBalance()...getBalance() would return BankAccount's accountBalance. This is NOT the correct result we want.Actually, I think it's precisely what you want.
We want getBalance() to return BankAccount's accountBalance when we use a BankAccount object, and SavingsAccount's accountBalance when we use a SavingsAccount object.I seriously doubt that. I think you're confusing a BankAccount with a Customer, who can have more than one account.
In every system I've ever seen, a SavingsAccount IS-A BankAccount - that is to say, it's a genuine subtype. Now, it may well contain other fields ('interest'?) that a normal account wouldn't, but 'balance' ain't one of them.
Winston
Maybe you are looking for
-
Norton toolbar no longer compatable with firefox 4. Do I need to go back to IE so I have it working?
Norton toolbar incompatible with Firefox 4. I need to use IE or Safari for my browser since I upgraded. I would prefer to use Firefox but to many things are no longer compatible.
-
Multimedia touch panel buttons on Satellite A500 are not all working
Hello, I recently purchased an A500 (PSAR9A-02J001) laptop running Windows 7 (32-bit) Home Premium. Not all the top Multimedia touch panel buttons are working. When buttons are pressed, the laptop makes a beeping sound (which is normal) but the corre
-
Invoce plan automatic payment settlement
Dear friends, I created rent invoice plan documents through MRIS transaction by using periodic invoice plan,my question is how to make payments automatically using invoice plan plz can u explain detail Regards Govind
-
Hi experts, I encounter an error message while posting GR for subcontract PO, *Delivery note not found* I understood that delivery note is a reference no only, ever I enter some number still the error message persists. Plz guide me how to overcome th
-
If you're trying use your hotspot and connected to wifi on your iphone, does the wifi stop working and start using your data instead of staying connected to the wifi?