Using iWeb Switch, iWeb quits with error page

I am having a couple of problems with iWeb Switch.
Often when I open a local web, I get two webs opened. I use command W on the undesired one and then resave.
This doesn't always work.
I also notice that iWeb suddenly quits with a large page of codes that ask me to relaunce or quit iWeb.
None of these problems cause me to lose work or stop me from using iWeb but is annoying.
Thanks for any help.
larryb

If you're referring to the code that Cyclosaurus provided:
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
and you created the application according to the instructions in my post only you will know where the applicaion would be.  If you downloaded my version of it, iWeb Switch Domain, just search for it on your hard drive.

Similar Messages

  • Use iWeb '09 with Google Blog or Wordpress

    it's possible to use iWeb '09 with Google Blog or Wordpress?
    If it's possible, how?
    I'm still new to iWeb and blogging...
    Hope someone can help me with this...

    Blogging with Wordpress is covered here....
    http://iwebfaq.org/site/iWeb_Blogging.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Can I use iWeb 06 with Mobile Me?

    Hello,
    I was just wondering if I could still use iWeb 06 with Mobile Me, or do I have to upgrade to iWeb 08?
    Any answers would be greatly appreciated!
    Thanks,
    Matthew

    I was just wondering if I could still use iWeb 06 with Mobile Me
    Yes. Publish to .Mac.
    (36915)

  • Problems with error-page in web.xml and page caching

    Having a few problems with error pages and web.xml with browsers caching the error pages and strange errors coming out of weblogic.servlet.intenal.WebAppServletContext
    I'm trying to set a web app up so that all http errors and all exceptions are routed thruogh predefined resources. For now, I'm simply send 400 errors to 400.html and the ServletException, IOException and RuntimeException to respective html pages.
    What I'm finding is that the error codes work fine but the exceptions are only be routed to the correct error page for the first call to the servlet after server restart.
    So for example, I have my servlet throwing a ServletException as a test case. The weblogic server log shows that ServletException is thrown, and the correct error page for ServletExceptions is shown.
    If I change the Servlet code to throw IOException in place of SevletException, the weblogic.log shows that IOExceptyion is being thrown (so the servlet has deployed successfully), however the Servletxception error page is shown on the browser.
    I'm using IE6 and I've changed the setting such that a new page is requested every time using the tools-internet options-temp internet files-settings option to "check for new versions of stored pages: Every visit to the page".
    Despite this, the servlet exception error page still appears.
    If you clear the cache from the temp intenet files->delete files IE option, the correct errror page will be shown so it appears that the browser cache is being used after all.
    everytime I delete the temp intenet files I get the correct error page on the first request after but then not after that.
    I have implemented the service method for this test to throw the exceptions - does this make a differecne?
    As a test, I have moved the imlpementation to the doGet method instead bu I now get a strange eror from weblogic comlpaining about an arrayOutOfBoundsException because eror codes in the web.xml are not supported! - see error above.
    Any help is appreciated

    After further investigation: -
    There are no problems with error pages based on error codes, only error exceptions.
    As a test case, I have a service method in a servlet throwing either one of the three exception types that servlets can throw (Runtime, Servlet & IO) the following rules apply. The exception to be thrown is hardcoded and is changed and the web app rebuilt each time. The correct web.xml has been deployed to the app server (checked through console). the webapp is being redeployed correctly - this can be seen in the weblogic log, where the correct exception is reported.
    I am using WLS 8.1, Servlet 2.3, JDK 1.4.1_02
    In all cases, the weblogic log reports that the servlet is throwing the exception as expected.
    Despite having set error-page for exception javax.servlet.ServletException, the exceptions are diverted to the error page that has been set up for http error code 500
    The error page for ServletException is therefore never reached.
    I have the browser set to request pages every time it is asked.
    Once the servlet has thrown an IOException, the only way to get the browser to report an IO or Runtime exception error-page is to clear the browser cache. Restarting the server has no effect.
    Once the servlet has responded with ANY exception, it is not possible to get it to report a ServletException (which is incorrectly reported as a 500 anyway) unless the cache is cleared. Restarting the server has no effect.
    In the case where the servlet throws ServletException, it has no root exception. The servlet 2.3 spec states that if ServletException is thrown but cannot be found in the error pages, the root excpetion will be extracted and the error page list traversed again. Knowing that the RuntimeException error page is correct shown when RuntimeException is throwm, I have nested this inside the ServletException, however error page for http error 500 is still shown.
    I don't believe this is a WLS 8.1 problem, as the console shows that the correct exception is thrown each time. this is backed up by the fact that the correct exception page is thrown when the cache is cleared regardless of what exception was previousdly thrown by the servlet. This excludes ServletException which is always incorrectly thrown as a 500.

  • [DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012

    Hello, i hope someone can help me with this tricky situation.
    The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2"
    I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers.
    The problem is "transferring" the netlogon share.
    in DCDIAg on the new server i get:
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = DC2
       * Identified AD Forest. 
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\DC2
          Starting test: Connectivity
             ......................... DC2 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\DC2
          Starting test: Advertising
             ......................... DC2 passed test Advertising
          Starting test: FrsEvent
             There are warning or error events within the last 24 hours after the
             SYSVOL has been shared.  Failing SYSVOL replication problems may cause
             Group Policy problems. 
             ......................... DC2 passed test FrsEvent
          Starting test: DFSREvent
             ......................... DC2 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... DC2 passed test SysVolCheck
          Starting test: KccEvent
             ......................... DC2 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... DC2 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... DC2 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... DC2 passed test NCSecDesc
          Starting test: NetLogons
             Unable to connect to the NETLOGON share! (\\DC2\netlogon)
             [DC2] An net use or LsaPolicy operation failed with error 67,
             The network name cannot be found..
             ......................... DC2 failed test NetLogons
          Starting test: ObjectsReplicated
             ......................... DC2 passed test ObjectsReplicated
          Starting test: Replications
             ......................... DC2 passed test Replications
          Starting test: RidManager
             ......................... DC2 passed test RidManager
          Starting test: Services
                NtFrs Service is stopped on [DC2]
             ......................... DC2 failed test Services
          Starting test: SystemLog
             ......................... DC2 passed test SystemLog
          Starting test: VerifyReferences
             ......................... DC2 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : dom1
          Starting test: CheckSDRefDom
             ......................... domain passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... domain passed test CrossRefValidation
       Running enterprise tests on : domain.xxxxx.no
          Starting test: LocatorCheck
             ......................... domain.xxxxx.no passed test LocatorCheck
          Starting test: Intersite
             ......................... domain.xxxx.no passed test Intersite
    I have as a last option the burflags issue, i tried this with the option D2, but i think i have done it wrong, because the netlogon share is gone on the old DC. i took a backup of the files and folders before
    i did this. http://support.microsoft.com/kb/290762/en-us But i am a little confused on which server i am going to set the D4 value on now? COuld someone help? Best regards Aksel

    Hello Dirk
    And thank you for your answer, in regards of the KB, do i have to follow the steps regarding:
    Global vs. replica set specific reinitialization
    You can locate the replica set specific
    BurFlags
    registry key by determining the GUID for the replica set that you want to configure. To determine which GUID
    corresponds to which replica set and configure a restore, follow these steps:
    Click Start, and then click Run.
    In the Open box, type cmd and then press ENTER.
    In the Command box, type net stop ntfrs.
    Click Start, and then click Run.
    In the Open box, type regedit and then press ENTER.
    To determine the GUID that represents the replica set that you want to configure, follow these steps:
    Locate the following key in the registry:
    KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Replica Sets
    Below the Replica Sets subkey, there are one or more subkeys that are identified by a GUID. In the left pane, click the GUID, and then in the right
    pane note the Data that is listed for the Replica Set Root value. This file system path will indicate which replica set is represented by this GUID.
    Repeat step 4 for each GUID that is listed below the Replica Sets 
    And so on?
    I have only thos 2 DC's in the network...

  • I have a domain name with go-daddy can i use iweb to create my page?

    I'm trying to help a friend set-up a website.  he has a domain name with go-daddy but hasnt set-up the web page at all can i use iweb and upload it to the domain name he already has bought?  I'm a first time iweb user please help!!

    Your friend needs both a domain name and a web hosting account in order to get his website online.  If he has both with GoDaddy.com then yes, you can create and upload the site. 
    If he has purchased only a domain name he'll need to get a hosting service.
    OT

  • Multiple questions about using iWeb '09 with my Host Excellence, GoDaddy & Storenvy Accounts. Can you Help?

    Hello, my name is Luis Diaz and I have always appreciated the help here in the iWeb community.  I've been using iWeb for a long time. For some reason my usernames are not working lately - LuisDiazArt or RabidArt)
    I updated my domain service with Host Excellence before MobileMe expired and thank you guys for the help with that. So far it's been a flawless service and because of that I'm very happy. I also have all my domains in GoDaddy. They have been very helpful
    Okay I'm going to try to explain my current problem. I'm trying to create a subdomain in GoDaddy for my website: LuisDiazArt.com
    I went and added a Subdomain in the Control Panel as: store.LuisDiazArt.com The subdomain suppose to mask my store: luisdiaz.storenvy.com
    I thought by adding this subdomain it would make all the addresses look similar (and more clean) just in case someone gets lost along the way.
    So what's happening after I waited an hour is I'm getting: http://store.luisdiazart.com/LuisDiazArt.com/Art_of_Luis_Diaz_%7C_LuisDiazArt.co m.html
    I'm getting the huge and familair long addresses and it is not pointing to my store, but to the homepage.
    Did I do something wrong or do I not understand something fully about subdomains? I thought you can make a subdomain point to another site. Perhaps it can't be done the way I'm thinking about this.
    So to fix this issue I am thinking about making a duplicate website with a different domain name (RabidArt) and mask it with LuisDiazArt (this is site name I use on business card and everything else).  After that make a subdomain with the same: http://store.luisdiazart.com
    Perhaps this may fix the problem.
    So to do this I may need to add another site onto my account (Basic and not Business) on HostExcellence.
    So my other questions are:
    Can I have multiple domains or websites using iWeb on a Basic Host Excellence Account? I checked out a few websites, but couldn't really find out if I can have multiple domains/websites using iWeb on Host Excellence with my current account.
    I do know how to make a new duplicate site, but do you publish it the same way as you would with the regular site or do I have to so something different?
    Hopefully the problem can be fixed not having to do a new site and maybe it was something I did wrong when I added a subdomain.

    To add more domains you need to upgrade your account.
    To have a sub domain for your store you need to create a separate site in iWeb and upload these files to the store.luisdiazart.com folder.
    The files for the main site go in the luisdiazart folder.
    Use an external hyperlink to link one to the other.

  • Get 200+mail daily -upon deleting, mail quits with error message.

    New Mac user.Three problems:
    First, I'm receiving approx. 200+ e-mail ads daily.
    Second, upon attempting to delete these simultaneously, mail quits w/ error message indicating the application has encountered an unexpected error.
    When I delete them individually, I'm able to delete around 3 or 4 before the same thing happens.
    And last but not least:
    When I re-open the mail, any ads I hoped were deleted show back up as new. Any help would be appreciated.
    iMac   Mac OS X (10.2.x)   320MB, 333MHZ

    My Yahoo email account worked just fine on my iPhone 4S  for the last 2 months. Then this morning I started receiving the apple.imap.mail,yahoo error.  I tried all of the steps above in solving the yahoo email issue including numerous hard re-sets and deletions of my yahoo account settings without any success. So I gave up trying to use the default Yahoo setup option.  I added my Yahoo account back as an "other" type email account and then had the option to choose to set it up as a "POP" account instead of an IMAP type. I then just used the server settings recommended from Yahoo Help for a Yahoo Plus Email POP (or just google yahoo plus email pop settings). This works and I am back in business.
    I'm not sure if this will work for yahoo mail classic accounts.
    Frustrating that this issue seems to have been going on for quite awhile and Apple still as not made any acknowledgement of this issue or proposed a fix for those of us that can not resolve the issue with a reset.

  • My iPhoto Quits with error

    Every time I try to export my iPhoto it quits with an error report. It used to do this no problem. Can anyone help me?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Use of "Archive Source Files with Errors" for BIC module error

    Hi All,
    I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
    My question is if the input file caught in error with BIC Module e.g
    "MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
    can we move these errornous files to another directory using Processing parameter  "Archive Source Files with Errors" available with Sender File Adapter?
    In File Adpater my Module tab looks like :
    1     localejbs/CallBicXIRaBean     Local Enterprise Bean     bic
    2     localejbs/CallSapAdapter     Local Enterprise Bean     0
    In my scenario  , its not working..  do we have any other option to achive this?

    Hi Jyoti,
    I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
    Regards,
    Prateek

  • Problen with error-page in web-app

    Hi!
    Anybody got working <error-page> in <web-app>?
    As I can see, oc4j (1.0.2.2.1) forgots about contentType and sets application/jsp mime type for error page...
    null

    Did you ever figure this out... it's still happening with Oracle9iAS (9.0.2.0.0) ... and the error page tries to download.
    If you had any luck with it, please let me know.

  • Using another switch or router with TC???

    Do you use another ethernet switch or router with an integrated ethernet switch with your TC??? How do you have things setup?
    BTW: I'm running out of physical ethernet ports and I need to use Vonage...
    R

    If you're out of LAN ports then yes, you need a switch. Plug it into your TC and plug other stuff into the switch. Simple.
    When buying a switch, remember one of its ports will be occupied by the connection to the TC. For example, if you're using all three TC LAN ports, buying a five port switch results in a net gain of only three ports: one of them is needed for the uplink, and the one you had to unplug from the TC must now be connected to the switch... three remain.
    Fortunately they're not expensive.

  • OpenLDAP doesn't start – it quits with error "Segmentation fault"

    I tried do set up and start the OpenLDAP server as it is delivered with my iMac and OS X Tiger 10.4.5.
    $ sudo /usr/libexec/slapd -d 255
    ...prints a lot of stuff (reading config file and core.schema) and then quits with:
    >>> dnNormalize: <cn=Subschema>
    => ldap_bv2dn(cn=Subschema,0)
    ldap_err2string
    <= ldap_bv2dn(cn=Subschema)=0 Success
    => ldap_dn2bv(272)
    ldap_err2string
    <= ldap_dn2bv(cn=subschema)=0 Success
    <<< dnNormalize: <cn=subschema>
    Segmentation fault
    Even "sudo /usr/libexec/slapd -V" ends with that error message:
    @(#) $OpenLDAP: slapd 2.2.19 $
    Segmentation fault
    Does anybody have a solution or at least the same problem?
    Thank you very much!
    nic
    iMac 20" Intel Core Duo 2,0 GHz   Mac OS X (10.4.5)   slapd 2.2.19

    I just discovered that I have this "issue" with my Macbook as well. Did you install openldap & berkley db with fink or by hand? Could you provide some details on how you managed to get this problem fixed?
    thanks in advance
    Macbook Pro   Mac OS X (10.4.6)  

  • Using iWeb '08 with an external server

    I'm having some problems getting my website to function correctly when uploading it to a server other than .Mac.
    I have exported the whole site to a folder, although the server I am trying to upload to requires a different port number so I have to use a : in the web address.
    For some reason iWeb doesn't recognise this character. Is there anything I can do about this?
    Many thanks,
    Phil

    I thought it was iWeb that was altering some of the code somewhere along the way,
    I think that is correct. For some reason, the : gets translated into its escape code %3a when certain javascript files are created, e.g.
    http://media.beauchamp.leics.sch.uk:83/MediaGallery/Music_Videos/Music_Videos_files/MusicVideos.js
    I suppose you might be able to fix the problem by just doing a search/replace on those files (but you have to do it again every time you republish the site).

  • Keynote 09 quits with error "using SFWordProcessing plugin"

    Keynote crashes every time I try to open most of my existing keynotes files. I have been able to open a couple but can figure out why some will open and others won't I can create new files and those seem to be OK. I think the problem arose after I upgraded to 10.6.2, but I am not sure. I am panicked that I can't access any of the dozens of Keynote 09 presentations. Fortunately, I have another week before my next presentation. Any suggestions?
    MacBook Pro MacBookPro Intel Core 2 Duo 2.6 GHz 2 GB
    Keynote 5.0.3
    Mac OSX 10.6.2
    Dick Jones

    I do not have an answer, but I experienced the same problem yesterday, 11/11. I also recently upgraded to 10.6 and have been using iWork '09 and Keynote 5.0.3. I have had zero problems opening any of my Keynote files until yesterday. Two files were either unable to open or if opened would not display/play properly. Actually I was able to open one presentation but when I clicked on a certain slide the error message appeared, the one about the SFWordProcessing plugin, and the program quit. I re-opened, dragged the "good" slides to a new presentation document and re-fashinoned another slide. I had to completely start over on the other - even the backup would not load.
    Also I notice that in "Letter Press", if I select italic, (from the keyboard or the format menu) the entire set of bullets displays vertically, only one letter wide! This may be the case across the board, I don't know.

Maybe you are looking for