Using OBIEE for a custom Data Warehouse

Hi Everyone,
I am very new to OBIEE and I have a few questions about this product family.
1. I have an existing custom build data warehouse, and I would like to know, is it possible to have build reports on this data warehouse?
2. I understand that OBIEE comes with pre-built ETL jobs in Informatica, what kind of license is it? Is it possible to modify them, or even build new jobs that load into a non-OBIEE data warehouse?
your answer will be greatly appreciated.
Jeffrey
Edited by: user3265404 on Oct 13, 2009 12:50 PM

Its the same Informatica which can do all functions as a stand alone Infa. additionally it also has prebuilt adapters for source systems like Siebel, APPL, PSFT, JDE, SAP and some universal adapters, so the license included these also which is going to cost more than getting a informatica Licence from Informatica Corp. Moreover, OBI Apps 7.9.6 comes with Informatica 8.6 which is a little older version of the tool. Informatica is going to release version 9 in a couple of weeks.
I see that you already have a datawarehouse, so why do you need a ETl tool again?
OBI EE can directly report out of a datewarehouse, and also transactional systems as long as the metadata layer is built.
PS: Am I clear?

Similar Messages

Interface Using BAPI for Uploading shipment datas

Can any1 send me the example code for Inbound Interface using BAPI for Uploading shipment datas.please kindly send me the programs which u using with BAPI

Hi
Except hiring (or new joinee) for all other actions you can use below Function Module.
HR_INFOTYPE_OPERATION.
~~~Ganesh Kumar K.

Why can't I use iCloud for exchange of data - like I could with MobileMe?

Why can't I use iCloud for exchange of data - like I could with MobileMe?
Oder auf Deutsch, warum kann ich keine Daten mehr in iCloud speichern bzw. zum Austausch bereitstellen, wie das bei MobileMe noch ging?
Danke für die Hilfe
Thanx in advance!

The purpose of iCloud is to sync data between your devices.
There is no "web address" to your files and no way to "share" them with others (except photos).

BW Extractors for NON-BW Data Warehouse

Hi,
I am working on a client who wishes to use a custom developed Data Warehouse. Is there any way to use SAP's standard extractors to extract data to these non-sap dw systems (or download the data in flat file format from extractor after run)? We are looking for mainly LO Cockpit and Finance extractors.
Best regards,
Nikhil

One option I know of is using Informatica you can extract data from SAP R/3 and load a non-BW data warehouse via SAP BCI adapters. BCI adapter makes use of delivered extractors.
Check out the webex replay of InformaticaWorld conference
http://www11.informatica.com/replays/IW06_BOsession_Kato.wrf

Syntax for WriterLoginName in Data Warehouse DB

Hello
I'm having a few issues with our management servers writing to the Data Warehouse DB. I've checked the 'Management Group' table and can see the WriterLoginName is set to
DOMAIN\sv-scom-dw - however, i'm just querying whether that field should read
sv-scom-dw
The account is in fact a domain account. It's listed as the 'Data Warehouse SQL Account' & 'Data Warehouse Action Account' (under Administration > Run As configuration > Accounts).
We have two entries in the database security (rights over OperationsMangerDW), one as DOMAIN\sv-scom-dw & a local SQL login called sv-scom-dw. Both accounts have the following permissions: apm_datareader, apm_datawriter, db_datareader, db_owner, OpsMgrReader,
OpsMgrWriter, public.
We're a SCOM 2012 R2 environment. All servers are 2012 R2, SQL is also 2012 standard.
Anyone faced a similar issue before? I'm seeing a lot of alerts in the Monitoring section for the Data Warehouse. One in particular:
Data Warehouse failed to discover performance standard data set. Failed to enumerate (discover) Data Warehouse objects and relationships among them. The operation will be retried.
Exception 'SqlException': Management Group with id ''5F201AB2-4B10-7FCC-C716-B2361102248D'' is not allowed to access Data Warehouse under login ''sv-scom-dw''
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.Discovery.StandardDataSet
Instance name: Performance data set
Instance ID: {B81C47FB-A80D-0FE5-A8DB-DC4544FC8DA6}
Management group: ******
As you can see from the alert the account referenced is 'sv-scom-dw' and not 'DOMAIN\sv-scom-dw'. Which is why I originally asked, should the field in the management table be updated?
Thanks, David.

Hi guys.
Thanks for the responses, I shall provide an event ID shortly. In response to Mai, I've followed the link you've posted and I'm now checking the 'data source and related settings', so i've gone to http://localhost/reports on the Warehouse server (which
also hosts the reporting), and i've got the following error:
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. (rsReportServerDisabled)
Get
Online Help
Keyset does not exist (Exception from HRESULT: 0x80090016)
Have you come across this before?

Error using Bapi_PO_Change for update custom fields

Dear Expert,
I have requirement for update custom field in table ekko. I used BAPI_PO_CHANGE with PO_number as a key. Then i put the value of custom field in segment TABLES - EXTENSIONIN.
But I get error : "ERROR TRANSFERING EXTENSIONIN DATA FOR ENHANCEMENT CI_EKKODB".
When I checked, I found the difference between data type the value for BAPI_PO_CHANGE (Usinf structure BAPIPAREX) and data type for custom field in table EKKO.
Data Type in BAPI_PO_CHANGE is CHAR (you can see in structure BAPIPAREX). And data type for the custom field is DECIMAL.
I found the note '1124803', but the correction note was not applicable for us because our released system is 500.
Is there any suggestion or solution for resolve our problem?
Really appreciate your help.
Thanks.

Hi Laxmikanth Bethi ,
I tried with BAPI_PO_CHANGE in level header, and SAP was support the BAPI. And also i tried to appending the same fields in MEPOHEADR & MEPOHEADERX structures, but the problem is the type of my custom fields are DECIMAL, then the type MEPOHEADR & MEPOHEADERX structures are CHARACTER. So i got the error : "ERROR TRANSFERING EXTENSIONIN DATA FOR ENHANCEMENT CI_EKKODB".
Because the types are difference.
Have you any suggestion to solve this problem?
Really appreciate for your input.

UDO Problem (I am Using UDO For My Custom Form.......)

Hi Friends
I am Using UDO's For My Custom Form The Form Is Created using Screen Painter . In This Form Two Buttons One For OK and Another for Cancel Button ID's Are 1 & 2. According to Form Mode The Button Caption is Changing. Second Button Caption is Always CANCEL. By Default form open with ADD Mode.But I want to OK MODE. or UPDATE MODE.
My Main Quation is I Want to Open My Form in OK Mode or UPDATE Mode.
Thanks & Regards
Naresh.K

It so simple Naresh,
After loading xml file write the below code...
oForm.Mode=SAPbouiCOM.BoFormMode.fm_UPDATE_MODE
If it helps give reward points,
Regards,
Anitha

Using Highlight for columns in data tables

Hi, I'm using the "Highlight" function of SpryEffects in
combination with the sorting features. My HTML structure is a
simple data table, with a repeating region on the table row, so it
pulls in as many rows there are pieces in the attached XML file.
When I sort by one of the column headers at the top, I want to
highlight that whole column, so users can see what they're sorting
by. I'm able to get the first row of the data table highlighted,
but none of the following rows work. I'm pretty sure the problem is
that the highlight function only works when you use an id to define
the element that you want highlighted. If it's in a repeating row,
it sees many ids on the page, and only applies the highlight to the
first one. I want to change the id to a class, so I can put
multiple ones on the page and have it work, but I can't see how to
do that in the SpryEffects.js file.
Can anyone tell me if it's possible to do this? Thanks.
Here's the portion of the .js file:
function setupHighlight(element, effect)
Spry.Effect.setStyleProp(element, 'background-image',
'none');
function finishHighlight(element, effect)
Spry.Effect.setStyleProp(element, 'background-image',
effect.options.restoreBackgroundImage);
if (effect.direction == Spry.forwards)
Spry.Effect.setStyleProp(element, 'background-color',
effect.options.restoreColor);
Spry.Effect.Highlight = function (element, options)
var durationInMilliseconds = 1000;
var toColor = "#ffffff";
var doToggle = false;
var kindOfTransition = Spry.sinusoidalTransition;
var setupCallback = setupHighlight;
var finishCallback = finishHighlight;
var element = Spry.Effect.getElement(element);
var fromColor = Spry.Effect.getStyleProp(element,
"background-color");
var restoreColor = fromColor;
if (fromColor == "transparent") fromColor = "#ffff99";
var optionFrom = options ? options.from : '#ffff00';
var optionTo = options ? options.to : '#0000ff';
if (options)
if (options.duration != null) durationInMilliseconds =
options.duration;
if (options.from != null) fromColor = options.from;
if (options.to != null) toColor = options.to;
if (options.restoreColor) restoreColor =
options.restoreColor;
if (options.toggle != null) doToggle = options.toggle;
if (options.transition != null) kindOfTransition =
options.transition;
if (options.setup != null) setupCallback = options.setup;
if (options.finish != null) finishCallback = options.finish;
var restoreBackgroundImage =
Spry.Effect.getStyleProp(element, 'background-image');
options = {duration: durationInMilliseconds, toggle:
doToggle, transition: kindOfTransition, setup: setupCallback,
finish: finishCallback, restoreColor: restoreColor,
restoreBackgroundImage: restoreBackgroundImage, from: optionFrom,
to: optionTo};
var highlightEffect = new Spry.Effect.Color(element,
fromColor, toColor, options);
highlightEffect.name = 'Highlight';
var registeredEffect =
SpryRegistry.getRegisteredEffect(element, highlightEffect);
registeredEffect.start();
return registeredEffect;

Hi Philip, Thanks a lot for puting this enhancement request through.
Just downloaded the latest Patch upgrading to v 3.1.2-704 and confirmed that this functionality is not available yet.
Keeping your experience in mind what kind of expectation to you have for the approval and realization of your request?
Most likely this will take a couple of month – right? Or is there a beta version of 3.2 already available we could use.
Thanks a lot. Cheers Stefan

Using cache for read only data

In my application I have to display some read only data (in number of drop down present on several portlets)
this data might be driven from the database or from some XML/property file.Not decided yet.
for example : Country /state/City/Zip code etc..
Kindly let me know how can I implement the same in Weblogic Portal 10.0.
Do I have to use some third party caching mechanism like Hibernate cache for this
or
Weblogic portal do support caching ??
Please suggest the all possible soultions to implement this.

Cache cache = CacheFactory.getCache("yourCache"); //any name can be passed, and you can create as many as you want , perhaps by functionality, perhaps by size etc. If you want to configure statically you must use this name in the xml file. If you define it in the xml file , you can administer the cache from Portal Admin
cache.put("key","value");
cache.get("key");
There are other advanced things you can do like Time To live / flushing / auto reload the cache which is all described in the javadoc
regards
deepak

Using workspaces for "ALMOST" static data

          Hi,
          The application that we are developing has the following requirement:
          We have a whole bunch of data that is ALMOST static as far as the application is concerned.
          However this data can change infrequently.
          We have two solutions in mind
          1) We are planning to have a StaticDataManager component that will handle the reading/updation of this data.
          All the other components of the application will get the static data from the StaticDataManager
          and cache this data to avoid communication between the components.
          The application will be hosted on a clustered WLS configuration.
          Now suppose an updation takes place, how best can we update all the components that have the cached data?
          2) In case we use Workspaces to cahce this static data, does the cluster configuration take care of
          updating the workspaces in the machines in the cluster?
          TIA!
          Sreeja


If you do like you say and specify servera and then specify serverb
          respectively, then yes the workspace doesn't show the same information
          across the cluster. However, if you always specify the cluster, serverc,
          then no matter which side you update or read from the data is the same. So
          yes, if you specifiy a specific server in the cluster, and not the cluster,
          the data will not replicate across the cluster, and you lose concurrency.
          Let me paste in the output to show you what I am seeing which proves the
          data is being replicated with a single write.
          Tester ver. 1.00.00 ----> Test started...
          Connected successfully using http to ethouic97/198.171.100.107:80
          ws.store(DOG, FIDO)
          Connected successfully using http to ethouic97/198.171.100.106:80
          ws2.fetch(DOG)
          DOG = FIDO
          These are some system outs from the test app below with a few extra system
          outs. Notice if the cluster is always your connection point and not an
          individual server, in this case ethouic97. Then the answer to the original
          first question is YES, you can store near static data in workspaces on a
          cluster to have the data replicated across the cluster. However, you must
          always address the cluster and not the individual servers, in this case
          address ethouic97 never server 106 or 107 directly.
          Jonathon Cano
          "Mike Reiche" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Well, it does look like it works, doesn't it?
          >
          > Now try running the first half on one WLS instance and the other half of a
          different WL instance and
          > specify servera in the first half and serverb in the second half. If the
          workspace is replicated it should
          > work.
          >
          > It's broken now. Not really. Regardless of where the t3 connection is
          made, the workspace is
          > in the local WL instance.
          >
          > Mike
          >
          >
          > "Jonathon Cano" <[email protected]> wrote:
          > >Details:
          > >We are using a DNS cluster where serverc actually maps to servers a and
          b.
          > >If you set the workspace to SCOPE_SERVER, and use a t3client connection
          to
          > >the serverc, it can not be servera or serverb directly, then the
          workspace
          > >is updated or read from the data is persisted across both sides of the
          > >cluster. All reads and writes must be done using the cluster name for
          this
          > >to work. I use this to manage fail-over for some Vitria subscribers I
          have
          > >runnig at startup. I have a tester I wrote which works, here is the
          code:
          > >
          > > private void testWorkSpaces() {
          > >
          > > try {
          > >
          > > T3User userInfo = new T3User("system","password");
          > >
          > > T3Client t3 = new T3Client("http://cluster:80",userInfo);
          > > t3.connect();
          > >
          > > WorkspaceDef ws =
          >
          >t3.services.workspace().getWorkspace().getWorkspace("test",WorkspaceDef.OPE
          N
          > >,WorkspaceDef.SCOPE_SERVER);
          > > ws.store("DOG", "FIDO");
          > >
          > > t3.disconnect();
          > >
          > > T3Client t32 = new T3Client("http://cluster:80",userInfo);
          > > t32.connect();
          > >
          > > WorkspaceDef ws2 =
          >
          >t32.services.workspace().getWorkspace().getWorkspace("test",WorkspaceDef.OP
          E
          > >N,WorkspaceDef.SCOPE_SERVER);
          > > String dogName = (String) ws2.fetch("DOG");
          > >
          > >
          > > t32.disconnect();
          > >
          > > System.out.println(dogName);
          > >
          > > } catch (Exception e) {
          > > System.out.println("Test Work Spaces Failed.);
          > > e.printStackTrace();
          > > }
          > >
          > > }
          > >
          > >The first t3client connection echos out that it is connecting to servera.
          > >The second t3client connection echos out that it is connecting to
          serverb.
          > >However, the data being returned is the name FIDO which was written to
          the
          > >workspace when connected to servera. Thus, as long as you are connecting
          to
          > >the cluster, you get replication of data across cluster for workspaces.
          > >
          > >WLS 5.1
          > >
          > >Jonathon Cano
          > >
          > >
          > >"mreiche" <[email protected]> wrote in message
          > >news:[email protected]...
          > >>
          > >> >I am confused.
          > >>
          > >> Yes.
          > >>
          > >> >So why was the original answer to workspaces being used for clustering
          > >near static data NO?
          > >>
          > >> Because that's what the documentation says?
          > >>
          > >> Are you really, really sure it's being propagated? Or perhaps it's just
          > >being updated identically on both instances?
          > >>
          > >> Mike
          > >>
          > >> "Jonathon Cano" <[email protected]> wrote:
          > >> >I am confused. I am storing data in the workspaces right now, and I
          am
          > >> >using this data in a cluster. I can update the data in the cluster
          just
          > >> >fine, and both sides of the cluster are being updated. So why was the
          > >> >original answer to workspaces being used for clustering near static
          data
          > >NO?
          > >> >
          > >> >Jonathon Cano
          > >> >
          > >> >"Tao Zhang" <[email protected]> wrote in message
          > >> >news:[email protected]...
          > >> >>
          > >> >> But the problem is whether you want Exactly-once-per-cluster data or
          > >not.
          > >> >> If not, you can deploy the data object into each server in the
          cluster,
          > >> >but in the data object, it contains the logic of updating itself.
          > >> >> Otherwise, you have to make it a pinned service.
          > >> >>
          > >> >> It's hard to describe here.
          > >> >>
          > >> >> Hope the document can solve your problem.
          > >> >>
          > >> >> http://www.weblogic.com/docs51/classdocs/API_jndi.html#user
          > >> >>
          > >> >> Good Luck.
          > >> >>
          > >> >> Tao Zhang
          > >> >>
          > >> >> "Sreeja" <[email protected]> wrote:
          > >> >> >
          > >> >> >Thanks. Can you please elaborate on the solutions 1 and 2. We are
          > >trying
          > >> >to eliminate the
          > >> >> > usage of 3 - entity beans - since we do not want the components
          using
          > >> >the data to contact
          > >> >> >the entity bean every time they need the static data - as this
          would
          > >> >result in remote calls
          > >> >> >for every usage.
          > >> >> >Sreeja
          > >> >> >
          > >> >> >"Tao Zhang" <[email protected]> wrote:
          > >> >> >>No, the workspace can't be clustered, the data can't be propagated
          to
          > >> >other
          > >> >> >>servers in the cluster.
          > >> >> >>Of course , you can select one server as the data holder and other
          > >> >servers
          > >> >> >>will be t3 client. But it's time consuming to
          > >> >> >>connect to the data holder server.
          > >> >> >>Possible solutions:
          > >> >> >>1. RMI.
          > >> >> >>Deploy the rmi as pinned service which hold the data.
          > >> >> >>2. jndi
          > >> >> >>The data can be propagated by jndi's default behavior.
          > >> >> >>3. database or entity bean.
          > >> >> >>
          > >> >> >>Hope this can help.
          > >> >> >>
          > >> >> >>Tao Zhang
          > >> >> >>
          > >> >> >>Sreeja <[email protected]> wrote in message
          > >> >> >>news:[email protected]...
          > >> >> >>>
          > >> >> >>> Hi,
          > >> >> >>>
          > >> >> >>> The application that we are developing has the following
          > >requirement:
          > >> >> >>> We have a whole bunch of data that is ALMOST static as far as
          the
          > >> >> >>application is concerned.
          > >> >> >>> However this data can change infrequently.
          > >> >> >>> We have two solutions in mind
          > >> >> >>> 1) We are planning to have a StaticDataManager component that
          will
          > >> >handle
          > >> >> >>the reading/updation of this data.
          > >> >> >>> All the other components of the application will get the static
          > >data
          > >> >from
          > >> >> >>the StaticDataManager
          > >> >> >>> and cache this data to avoid communication between the
          components.
          > >> >> >>> The application will be hosted on a clustered WLS configuration.
          > >> >> >>> Now suppose an updation takes place, how best can we update all
          the
          > >> >> >>components that have the cached data?
          > >> >> >>>
          > >> >> >>> 2) In case we use Workspaces to cahce this static data, does the
          > >> >cluster
          > >> >> >>configuration take care of
          > >> >> >>> updating the workspaces in the machines in the cluster?
          > >> >> >>>
          > >> >> >>> TIA!
          > >> >> >>> Sreeja
          > >> >> >>>
          > >> >> >>
          > >> >> >>
          > >> >> >
          > >> >>
          > >> >
          > >> >
          > >>
          > >
          > >
          >

Oracle giving Block corruption errors when using CDC for sending the data to SQL Server 2012

Hello Friends,
We are facing an error while using CDC with Oracle. It is a "Block corruption" error, which indicates at some level of data corruption. We ran RMAN validate command to scan the database for corruption but it returned with no errors, however he
Alert Log in Oracle is still coming up with the following error. Has anyone experienced this error when using Oracle Standard Edition and SQL 2012 ?
Trace file e:\app\pulse-ad\diag\rdbms\orcl\orcl\trace\orcl_ora_5992.trc
Oracle Database 11g Release 11.1.0.7.0 - 64bit Production
Windows Server 2003 Version V5.2 Service Pack 2
CPU                 : 4 - type 8664, 4 Physical Cores
Process Affinity    : 0x0000000000000000
Memory (Avail/Total): Ph:6782M/24575M, Ph+PgF:12203M/30844M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 151
Windows thread id: 5992, image: ORACLE.EXE (SHAD)
*** 2013-12-12 03:04:33.655
*** SESSION ID:(1281.3832) 2013-12-12 03:04:33.655
*** CLIENT ID:() 2013-12-12 03:04:33.655
*** SERVICE NAME:(orcl) 2013-12-12 03:04:33.655
*** MODULE NAME:(xdbcdcsvc.exe) 2013-12-12 03:04:33.655
*** ACTION NAME:() 2013-12-12 03:04:33.655
Lost-write detected for sequence 70856. The lost-write starts occurring in block 11193. The current block being validating is 12930.
Block dump of the first lost-write block:
Flag: 0x1 Format: 0x22 Block: 0x00002bb9 Seq: 0x000114bf Beg: 0x94 Cks:0x68ee
Dump of memory from 0x0000000598D06C00 to 0x0000000598D06E00
598D06C00 00002201 00002BB9 000114BF 68EE8094 [."...+.........h]
598D06C10 00085BF1 0023BDA1 000DE19C 000DE19C [.[....#.........]
598D06C20 0000000C 00000000 2209160A 5BF10000 [..........."...[]
598D06C30 3EB10502 00C0F5CA 0031BDA1 00010205 [...>......1.....]
598D06C40 02B22C6A 038A6D69 00000001 00000000 [j,..im..........]
598D06C50 4D554407 30373230 35BB0206 001100AE [.DUM0270...5....]
598D06C60 0001040A 000D000E 038A6D69 56B25735 [........im..5W.V]
598D06C70 729C0003 E19C0001 000C0006 000D0006 [...r............]
598D06C80 02BB0502 00C0F5CD 0023BDA1 000A0002 [..........#.....]
598D06C90 00C00013 000000D0 00030201 56B25736 [............6W.V]
598D06CA0 03890001 00000000 00000000 002E0105 [................]
598D06CB0 FFFF0003 00C0F5CD 56B25736 3EB10003 [........6W.V...>]
598D06CC0 FFFF0024 0014000C 000C0018 00120014 [$...............]
598D06CD0 09CC0058 E75B0022 0009000F 00085BF1 [X...".[......[..]
598D06CE0 0024BDA1 000DE19D 000DE19D 0000000C [..$.............]
598D06CF0 00000000 2309160A 5BF10000 3EB10502 [.......#...[...>]
598D06D00 00C0F5CD 0020BDA1 00010205 02B22C72 [...... .....r,..]
598D06D10 03900974 00000019 00000000 3030300A [t............000]
598D06D20 33303030 06323132 AE35BB02 0B441100 [0003212...5...D.]
598D06D30 0001040A 000D000E 03900974 56B25736 [........t...6W.V]
598D06D40 729C0003 E19D0011 000C0006 000D0006 [...r............]
598D06D50 02BB0502 00C0F5CD 0024BDA1 00EA0002 [..........$.....]
598D06D60 00270016 000001FC 00032C01 56B25736 [..'......,..6W.V]
598D06D70 00000001 00000000 30393007 002E0105 [.........090....]
598D06D80 FFFF0003 00C0F5CD 56B25736 00000003 [........6W.V....]
598D06D90 FFFF0025 00140052 000C0018 00070035 [%...R.......5...]
598D06DA0 0003000A 00070003 0001001D 00030001 [................]
598D06DB0 00010001 00010001 00010001 00010001 [................]
598D06DC0 00010001 00010001 00010001 00010001 [................]
598D06DD0 00010001 00000001 00010001 00010001 [................]
598D06DE0 00010001 00000014 09720174 00000022 [........t.r."...]
598D06DF0 0009000F 00085BF1 0025BDA1 000DE19A [.....[....%.....]
Block dump of the current block being validating:
Flag: 0x1 Format: 0x22 Block: 0x00003282 Seq: 0x000114c8 Beg: 0x0 Cks:0x312a
Dump of memory from 0x0000000598DDFE00 to 0x0000000598DE0000
598DDFE00 00002201 00003282 000114C8 312A8000 [."...2........*1]
598DDFE10 50424703 31303607 34353335 69745319 [.GBP.6015354.Sti]
598DDFE20 6E696C72 72502067 6375646F 4C207374 [rling Products L]
598DDFE30 4E206474 C3025650 0380013D 0457454E [td NPV..=...NEW.]
598DDFE40 4E1E09C2 1E09C204 10C2024E 1E09C204 [...N....N.......]
598DDFE50 09C2044E C2024E1E 03C30510 021B0929 [N....N......)...]
598DDFE60 C3053DC3 0F192602 2602C305 C3050F19 [.=...&.....&....]
598DDFE70 0C1A6203 5102C105 C2041F4E 044E1E09 [.b.....QN.....N.]
598DDFE80 4E1E09C2 0410C202 4E1E09C2 1E09C204 [...N.......N....]
598DDFE90 10C2024E 2903C305 78071B09 011D0B71 [N......)...xq...]
598DDFEA0 BF020101 1FBF0215 4E018001 53014E01 [...........N.N.S]
598DDFEB0 0723002C 0B0C7178 0A3C3C18 30303030 [,.#.xq...<<.0000]
598DDFEC0 33373030 4D033337 47034255 36075042 [007373.MUB.GBP.6]
598DDFED0 38333936 4E113331 2065776B 74616C50 [693813.Nkwe Plat]
598DDFEE0 6D756E69 56504E20 0B0AC303 4E038001 [inum NPV.......N]
598DDFEF0 C2045745 0459512E 59512EC2 5253C203 [EW...QY...QY..SR]
598DDFF00 512EC204 2EC20459 C2035951 C3055253 [...QY...QY..SR..]
598DDFF10 1B092903 0B0AC303 3C04C305 C3053239 [.).........<92..]
598DDFF20 32393C04 4F08C305 C105114F 1F4E5102 [.<92...OO....QN.]
598DDFF30 512EC204 2EC20459 C2035951 C2045253 [...QY...QY..SR..]
598DDFF40 0459512E 59512EC2 5253C203 2903C305 [.QY...QY..SR...)]
598DDFF50 78071B09 01190A71 C0030101 C0034709 [...xq........G..]
598DDFF60 8001330A 4E014E01 002C5301 71780723 [.3...N.N.S,.#.xq]
598DDFF70 3C180B0C 30300A3C 30303030 33373337 [...<<.0000007373]
598DDFF80 42554D03 50424703 31304207 344C5131 [.MUB.GBP.B011QL4]
598DDFF90 6F725020 63657073 614A2074 206E6170 [ Prospect Japan ]
598DDFFA0 646E7546 64724F20 44535520 30302E30 [Fund Ord USD0.00]
598DDFFB0 04C30331 03800133 0557454E 5B1603C3 [1...3...NEW....[]
598DDFFC0 03C30521 04215B16 1F4004C3 1603C305 [!....[!...@.....]
598DDFFD0 C305215B 215B1603 4004C304 03C3051F [[!....[!...@....]
598DDFFE0 031B0929 043304C3 4D245AC2 245AC204 [).....3..Z$M..Z$]
598DDFFF0 02C3054D 040A1A18 494002C1 1603C305 [M.........@I....]
*** 2013-12-12 03:05:07.984
** LOGMINER WARNING - Invalidated 6 LCRs **
Complete dump of first invalid START LCR follows:
++ LCR Dump Begin: 0x0000000532C004E0 - CANNOT_SUPPORT
     op: 255, Original op: 3, baseobjn: 0, objn: 233316, objv: 1
     DF: 0x00000002, DF2: 0x00000000, MF: 0x00000000, MF2: 0x00000000
     PF: 0x40000001, PF2: 0x00002000
     MergeFlag: 0x00, FilterFlag: 0x00
     Id: 0, iotPrimaryKeyCount: 3, numChgRec: 4
     NumCrSpilled: 0
     RedoThread#: 1, rba: 0x0114c8.0001c6ce.00d4
     scn: 0x0003.56b593be, xid: 0x0008.00c.00100d85, pxid: 0x0008.00c.00100d85
     ncol: 0newcount: 0, oldcount: 0
     LUBA: 0x3.c109c0.c.15.38f64
Thanks
Dee

Hi Dee,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Mike Yin
TechNet Community Support

Create new LSMW using Idoc for HR master Data

Hi Guys,
I was wondering id someone could help me. I have started developing an LSMW, of which I have already
created the Object. I have also created the Maintain attributes and I have supplied the Message Type, Basic Type and activated the IDOC inbound processing after providing the appropriate information.
The question I have is in the "Maintain source structure" do I need to create a structure for data records
and a structure for header?
Can I do a recording for transaction     -
"PA30" ---> update infotype 6
                                                       |
IDOC   -
> infotype 0,1,2,6
I have previously created HR LSMW using recording, but I have not used the IDOC facility and I'm not
sure of the differences.
Does anyone have any documentation.
Regards,
Frank

Dear Frank,
For Idoc method need to do setting first.
Creating pratner profile,.....................etc.
then rest of the thing are same.
Best Regards,
Flavya

Using ADM for create custom drawed items

Hi,
I've started a new color selector plugin for CS3. The Win version works well. But the Mac version doesn't call the draw procs (set by Item Suite's SetDrawProc).
I've create all items on the dialog box by ADM Dialog Suite (CreateItem).
All the track and notify procs are called. The dialog's draw proc also called. But the individual item-s draw proc doesn't.
The dialog created by this:
ADMInt32 item = gGlobalData->gDialogSuite->Modal
gGlobalData->gPluginRef,
GetLocalizedString(locDialogCaption),
0,
kADMModalDialogStyle,
DoUIInit,
NULL,
kADMTrackEnterBeforeDialogDoesOK
In DoUIInit :
_item = gGlobalData->gDialogSuite->CreateItem(dialog, Enums::kItemColorWheel, kADMUserType, &_colorWheel, ColorWheelItemInitProc, NULL, 0);
In ColorWheelItemInitProc:
gGlobalData->gItemSuite->SetDrawProc(item, ColorWheelDrawProc);
gGlobalData->gItemSuite->SetTrackProc(item, ColorWheelTrackProc);
The ColorWheelTrackProc's called the ColorWheelDrawProc doesn't.
I've tried other item types also. They didn't worked too.
The ADM Doc says: ADM dialogs, ADM items, and ADM entries can all have custom draw handlers, which
draw the object on the screen.
So where is the truth?
Regards
Zoltán

Thank you for your notice (twice).
In the future release of this plugin we will use native dialog code for win and mac. Until then we have to use ADM. Right now we have no other choice because of the deadline.

Using OUI for installing custom products

Hi All,
I want to use OUI to install a custom product that I have developed. So i have some doubts regarding that...
1. Can OUI be pointed to a new Products.xml file which contains the details of the new product installation.
2. Is there some link, documentation, APIs to do that?
Any sort of help is appreciated as it is crucial...
Thanks,
SaurabhS

HI user784664
I'm afraid that you can't do that. Products.xml can be use to perform silent installed, When prompted by OUI, locate products.xml in the installation source directory:
i.e connectors/framework/10.2.0.2/1.0/source/Disk1/stage
Oracle Universal Installer to install Oracle products in any of the three following modes:
* Interactive:
Use OUI's interactive mode to use the graphical user interface to walk through the installation, providing information in the installation dialogs when prompted.
This method is most useful when installing a small number of products in different setups on a small number of machines
* Suppressed:
Use OUI's suppressed mode to supply the necessary information by using a combination of a response file or command line entries with certain interactive dialogs. You can choose which dialogs to suppress by supplying the information at the command line when you invoke OUI. This method is most useful when an installation has a common set of parameters that can be captured in a response file, in addition to custom information that must be input by hand.
* Silent:
Use OUI's silent installation mode to bypass the graphical user interface and supply the necessary information in a response file.This method is most useful when installing the same product multiple times on multiple machines. By using a response file, you can automate the installation of a product for which you know the installation parameters.
Herewith the detailled documentation about OUI:
http://download.oracle.com/docs/cd/B19306_01/em.102/b16227/toc.htm
But may be a request via metalink it should be possible to get more details about that question. Oracle is using the OUI API for Grid controller, CRS, ASM and RDBMS so why not with your product.

Generic Data source using FM for BOM Item data is not saving

Hi Experts,
This is the first time I post on this forum.
I am creating a custom datasource (ycp_bom_itm) based on Function Module in R/3 which get data from MAST and STPO.
I have defined the Function Module and the extraction structure as well.
So While saving the Data source i am getting Error as
" Units field MEINS for field ZMENGE of DataSource ycp_bom_itm is hidden
Message no. R8147"
Does any of you have experience of this issue? Please Help to solve this issue
Thank's In advance

Hi,
Go to Rsa6 and select relevant d.s (Custom) there will be 4 options for each field selction, hide fieldi ,nversion,field only .
check MEINS field details either it is checked/unchecked (Enable/disabled) hide field , need to be un checked.
Thanks.

Using OBIEE for a custom Data Warehouse

Similar Messages

Maybe you are looking for