Using OCI from Oracle 12 to connect to an Oracle 10 server instance

Can I use the newest Instant Client of Oracle 12 to connect to an Oracle 10.2.0.5 server instance?

For at least the last decade OCI has always been backward compatible like that. I expect it will work.

Similar Messages

ODSI service using function from oracle database

Hi ,
I need to create a ODSI service using function from oracle database.
I am not sure how to create a Physical Layer and Logical Layer using the function fron db.
Kindly provide a sample . I need It ASAP. Thanks in advance.
Regards,
Tara

Here's what you do.
Create New Physical Data Service -> Relational -> MyDataSource -> Table -> SomeTable ... finish the wizard.
So now you have a Physical Data Service that represents a database table.
Create New Physcial Data Service -> Relational -> MyDataSource (the same one as above) -> Database Function -> Enter UPPER for the Function name, enter MyUpper fro the XQuery Function. Finish the Wizard (use something like MyUpperDs for the ds name).
Open MyUpperDs. Right-click -> Edit Signature on MyUpper. Change the ReturnType to string, change the Occurrence to Zero or One.
Add a parameter, change the Type to string, change the Occurrence to Zero or One.
Save.
Now, open the first ds you made SomeTable.ds (whatever). Run it in the test view.
Go to the Overview tab. Create New Operation. Give it the name SOMETABLE_UPPER. Save it.
Go to the Query Map tab, open SOMETABLE_UPPER. Drag and drop SOMETABLE (the system-generated function into the mapper. It will show a dotted line from SOMETABLE to the Return. Now drag-and-drop the SOMETABLE to the top-level element of the return type, it will show solid lines from each element in SOMETABLE to each element in the return type.
Now, drag-and-drop MyUpperDs.MyUpper into the Query Mapper. Edit the source, find where it added the line "for $x in myd:MyUpper()" and delete that line.
Change a line that simply returns a value to use your function, for example, change
<FIRST_NAME>{fn:data($CUSTOMER/FIRST_NAME)}</FIRST_NAME>
to
<FIRST_NAME>{myd:MyUpper(fn:data($CUSTOMER/FIRST_NAME))}</FIRST_NAME>
Click on the Plan tab and Show Query Plan. You will see that in the query plan, it is using the database UPPER function where you specified MyUpper.
Go to the Test View and run it.
I used the RTLCUSTOMER table in cgDataSource
xquery version "1.0" encoding "UTF-8";
(::pragma xds <x:xds xmlns:x="urn:annotations.ld.bea.com" targetType="t:CUSTOMER" xmlns:t="ld:physical/CUSTOMER">
<creationDate>2010-10-14T13:09:54</creationDate>
<relationalDB name="cgDataSource" providerId="Pointbase"/>
<field xpath="CUSTOMER_ID" type="xs:string">
<extension nativeXpath="CUSTOMER_ID" nativeTypeCode="12" nativeType="VARCHAR" nativeSize="32" nativeFractionalDigits="0" nativeKey="true"/>
<properties nullable="false"/>
</field>
<field xpath="FIRST_NAME" type="xs:string">
<extension nativeXpath="FIRST_NAME" nativeTypeCode="12" nativeType="VARCHAR" nativeSize="64" nativeFractionalDigits="0"/>
<properties nullable="false"/>
</field>
<field xpath="LAST_NAME" type="xs:string">
<extension nativeXpath="LAST_NAME" nativeTypeCode="12" nativeType="VARCHAR" nativeSize="64" nativeFractionalDigits="0"/>
<properties nullable="false"/>
</field>
<field xpath="CUSTOMER_SINCE" type="xs:date">
<extension nativeXpath="CUSTOMER_SINCE" nativeTypeCode="91" nativeType="DATE" nativeSize="10" nativeFractionalDigits="0"/>
<properties nullable="false"/>
</field>
<field xpath="EMAIL_ADDRESS" type="xs:string">
<extension nativeXpath="EMAIL_ADDRESS" nativeTypeCode="12" nativeType="VARCHAR" nativeSize="32" nativeFractionalDigits="0"/>
<properties nullable="false"/>
</field>
<field xpath="TELEPHONE_NUMBER" type="xs:string">
<extension nativeXpath="TELEPHONE_NUMBER" nativeTypeCode="12" nativeType="VARCHAR" nativeSize="32" nativeFractionalDigits="0"/>
<properties nullable="false"/>
</field>
<field xpath="SSN" type="xs:string">
<extension nativeXpath="SSN" nativeTypeCode="12" nativeType="VARCHAR" nativeSize="16" nativeFractionalDigits="0"/>
<properties nullable="true"/>
</field>
<field xpath="BIRTH_DAY" type="xs:date">
<extension nativeXpath="BIRTH_DAY" nativeTypeCode="91" nativeType="DATE" nativeSize="10" nativeFractionalDigits="0"/>
<properties nullable="true"/>
</field>
<field xpath="DEFAULT_SHIP_METHOD" type="xs:string">
<extension nativeXpath="DEFAULT_SHIP_METHOD" nativeTypeCode="12" nativeType="VARCHAR" nativeSize="16" nativeFractionalDigits="0"/>
<properties nullable="true"/>
</field>
<field xpath="EMAIL_NOTIFICATION" type="xs:short">
<extension nativeXpath="EMAIL_NOTIFICATION" nativeTypeCode="5" nativeType="SMALLINT" nativeSize="5" nativeFractionalDigits="0"/>
<properties nullable="true"/>
</field>
<field xpath="NEWS_LETTTER" type="xs:short">
<extension nativeXpath="NEWS_LETTTER" nativeTypeCode="5" nativeType="SMALLINT" nativeSize="5" nativeFractionalDigits="0"/>
<properties nullable="true"/>
</field>
<field xpath="ONLINE_STATEMENT" type="xs:short">
<extension nativeXpath="ONLINE_STATEMENT" nativeTypeCode="5" nativeType="SMALLINT" nativeSize="5" nativeFractionalDigits="0"/>
<properties nullable="true"/>
</field>
<field xpath="LOGIN_ID" type="xs:string">
<extension nativeXpath="LOGIN_ID" nativeTypeCode="12" nativeType="VARCHAR" nativeSize="50" nativeFractionalDigits="0"/>
<properties nullable="true"/>
</field>
<key name="CUSTOMER_0_SYSTEMNAMEDCONSTRAINT__PRIMARYKEY" type="cus:CUSTOMER_KEY" inferredSchema="true" xmlns:cus="ld:physical/CUSTOMER"/>
</x:xds>::)
declare namespace myd= "ld:physical/MyDs";
declare namespace f1 = "ld:physical/CUSTOMER";
import schema namespace t1 = "ld:physical/CUSTOMER" at "ld:physical/schemas/CUSTOMER.xsd";
import schema "ld:physical/CUSTOMER" at "ld:physical/schemas/CUSTOMER_KEY.xsd";
(::pragma function <f:function xmlns:f="urn:annotations.ld.bea.com" visibility="public" kind="read" isPrimary="false" nativeName="CUSTOMER" nativeLevel2Container="RTLCUSTOMER" style="table">
<nonCacheable/> </f:function>::)
declare function f1:CUSTOMER() as schema-element(t1:CUSTOMER)* external;
(::pragma function <f:function xmlns:f="urn:annotations.ld.bea.com" visibility="public" kind="create" isPrimary="true" nativeName="CUSTOMER" nativeLevel2Container="RTLCUSTOMER" style="table">
<nonCacheable/> </f:function>::)
declare procedure f1:createCUSTOMER($p as element(t1:CUSTOMER)*)as schema-element(t1:CUSTOMER_KEY)* external;
(::pragma function <f:function xmlns:f="urn:annotations.ld.bea.com" visibility="public" kind="update" isPrimary="true" nativeName="CUSTOMER" nativeLevel2Container="RTLCUSTOMER" style="table">
<nonCacheable/> </f:function>::)
declare procedure f1:updateCUSTOMER($p as changed-element(t1:CUSTOMER)*) as empty() external;
(::pragma function <f:function xmlns:f="urn:annotations.ld.bea.com" visibility="public" kind="delete" isPrimary="true" nativeName="CUSTOMER" nativeLevel2Container="RTLCUSTOMER" style="table">
<nonCacheable/> </f:function>::)
declare procedure f1:deleteCUSTOMER($p as element(t1:CUSTOMER)*) as empty() external;
(::pragma function <f:function kind="read" visibility="public" isPrimary="false" xmlns:f="urn:annotations.ld.bea.com"/>::)
declare function f1:CUSTOMER_UPPER() as element(f1:CUSTOMER)*{
for $CUSTOMER in f1:CUSTOMER()
return
<t1:CUSTOMER>
<CUSTOMER_ID>{fn:data($CUSTOMER/CUSTOMER_ID)}</CUSTOMER_ID>
<FIRST_NAME>{myd:MyUpper(fn:data($CUSTOMER/FIRST_NAME))}</FIRST_NAME>
<LAST_NAME>{fn:data($CUSTOMER/LAST_NAME)}</LAST_NAME>
<CUSTOMER_SINCE>{fn:data($CUSTOMER/CUSTOMER_SINCE)}</CUSTOMER_SINCE>
<EMAIL_ADDRESS>{fn:data($CUSTOMER/EMAIL_ADDRESS)}</EMAIL_ADDRESS>
<TELEPHONE_NUMBER>{fn:data($CUSTOMER/TELEPHONE_NUMBER)}</TELEPHONE_NUMBER>
<SSN?>{fn:data($CUSTOMER/SSN)}</SSN>
<BIRTH_DAY?>{fn:data($CUSTOMER/BIRTH_DAY)}</BIRTH_DAY>
<DEFAULT_SHIP_METHOD?>{fn:data($CUSTOMER/DEFAULT_SHIP_METHOD)}</DEFAULT_SHIP_METHOD>
<EMAIL_NOTIFICATION?>{fn:data($CUSTOMER/EMAIL_NOTIFICATION)}</EMAIL_NOTIFICATION>
<NEWS_LETTTER?>{fn:data($CUSTOMER/NEWS_LETTTER)}</NEWS_LETTTER>
<ONLINE_STATEMENT?>{fn:data($CUSTOMER/ONLINE_STATEMENT)}</ONLINE_STATEMENT>
<LOGIN_ID?>{fn:data($CUSTOMER/LOGIN_ID)}</LOGIN_ID>
</t1:CUSTOMER>
xquery version "1.0" encoding "UTF-8";
(::pragma xfl <x:xfl xmlns:x="urn:annotations.ld.bea.com">
<creationDate>2010-10-14T13:10:45</creationDate>
<customNativeFunctions>
<relational>
<dataSource>cgDataSource</dataSource>
</relational>
</customNativeFunctions>
</x:xfl>::)
declare namespace f1 = "ld:physical/MyDs";
(::pragma function <f:function visibility="protected" kind="library" isPrimary="false" nativeName="UPPER" xmlns:f="urn:annotations.ld.bea.com">
<nonCacheable/>
</f:function>::)
declare function f1:MyUpper($arg0 as xs:string?) as xs:string? external;
<cus:CUSTOMER xmlns:cus="ld:physical/CUSTOMER">
<CUSTOMER_ID>CUSTOMER1</CUSTOMER_ID>
<FIRST_NAME>JACK</FIRST_NAME>
<LAST_NAME>Black</LAST_NAME>
<CUSTOMER_SINCE>2001-10-01</CUSTOMER_SINCE>
<EMAIL_ADDRESS>[email protected]</EMAIL_ADDRESS>
<TELEPHONE_NUMBER>2145134119</TELEPHONE_NUMBER>
<SSN>295-13-4119</SSN>
<BIRTH_DAY>1970-01-01</BIRTH_DAY>
<DEFAULT_SHIP_METHOD>AIR</DEFAULT_SHIP_METHOD>
<EMAIL_NOTIFICATION>1</EMAIL_NOTIFICATION>
<NEWS_LETTTER>0</NEWS_LETTTER>
<ONLINE_STATEMENT>1</ONLINE_STATEMENT>
</cus:CUSTOMER>
.

WLST : Error connecting to a remote Weblogic server instance from OEPE 3.7

Attempting a to run a weblogic script connecting to a remote weblogic server instance (10.3.5), which is generating the following exception in OEPE 3.7.2 -
username = 'weblogic'
password = 'weblogic6'
url='t3://xxx.xxx.com:7001'
connect(username,password,url)
Connecting to t3://xxx.xxx.com:7001 with userid weblogic ...
This Exception occurred at Fri Feb 01 13:20:54 MST 2013.
Error occured while performing connect : Error connecting to the server : Failed to generate class for weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl_1035_WLStub
Use dumpStack() to view the full stacktrace :
java.lang.AssertionError: Failed to generate class for weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl_1035_WLStubconnect
Problem invoking WLST - Traceback (innermost last):
File "C:\Users\hughese\workspace\12c_wlst\wlst\heapsize.py", line 13, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 648, in raiseWLSTException
WLSTException: Error occured while performing connect : Error connecting to the server : Failed to generate class for weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl_1035_WLStub
Use dumpStack() to view the full stacktrace
Connecting to the local weblogic server instance (t3://localhost:7001) works okay.
From the command prompt (wlst.cmd) I'm able to connect to the remote weblogic server instance -
wls:/offline> connect('weblogic','xxxxx','t3:xxx.xxx.com:7001') ;
Connecting to t3://xxx.xxx.com:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'IDMDomain'.
I've compared the CLASSPATHs between OEPE and the command prompt.
Any assistance would be greatly appreciated.
Edited by: 950635 on Feb 1, 2013 7:47 PM

Hi,
1)To get mysql JDBC driver to work on my Linux system, i had to add the classpath for the driver to the .bashrc:
CLASSPATH=./:home/<user>/java/mm.mysql-2.0.6/:home/<user>/java
Note that I execute the java program as the user <user> (and .bashrc is the config. file of this <user>...). Perhaps you must do this as well for the Oracle driver on your client machine. I don't know if your client machine is UNIX/LINUX or WINDOWS. It should only be clear that the CLASSPATH is set in the config. file of the user under which the java program runs and that this user has the permission to access the files.
There are no differences between accessing the database locally than accessing it by a network connection. The only thing that matters are that the connection parameters are right and that the network works properly.
2) are you sure that the table tname (case sensitivity?) exits?
Marc

DBLink From Oracle 9i server to Oracle RDB Server

Hi,
i have to take access a table which is on ORACLE RDB server from Oracle 9i server...
I have tried this many times......but not succeed. plz help me its very urgent.

Hi..
What did you do...did you create a dblink...is there some error ..
To create the dblink you can use
create database link <name> connect to <username_of_remote_db> identified by <user's_password> using '(DESCRIPTION =
     (ADDRESS_LIST =
       (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.x.x.x)(PORT = xxxx))
      (CONNECT_DATA =
        (SID = remote_db_sid)
       (SERVER = DEDICATED)
;Refer to link: [http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_5005.htm#SQLRF01205]
Anand

Standalone webcache or Web cache from Oracle Apps Server 10.1.2.0.2?

Hi
I am installing web cache on two servers in web tier and J2EE server (with OHS) on another two servers in apps tier. Should I use standalone webcache or install from Oracle Apps Server package? If I choose Oracle Apps Server package, I have to disable Home, HTTP components. But it is DCM managed. Any suggestions?
And should I deploy my OHS servers on web cache servers in the web tier? In future we want to expand J2EE installation, we will deploy Portal with SSO, OID etc.
Regards
Shen Jie

Shen Jie,
Please review the Enterprise Deployment to see what are the best architectures.
Hope this helps.
Deepak

Recover deleted document from Oracle content server

Hi All,
I've deleted some of documents from oracle content server mistakenly. I am using oracle ucm11g.
I found that we have a feature called "Trash bin". Trash-bin used for recover the deleted document/folder but unluckily settings for "Trash Bin" is disabled in my UCM folder configuration.
Is there any other way to recover?
Please kindly help me on this. It's an urgent production issue, please.
Thanks for your great support in advance.

Is there any other way to recover?
Try to take a look at Repository Manager admin application: http://docs.oracle.com/cd/E21764_01/doc.1111/e10978/c03_repository.htm#DAFCGDIE
If you still can see your items there, you could recover the status.
If not, I'm afraid your documents are gone from UCM. In that case, you might recover them from a back-up. There is also a chance that documents are still present in the Vault directory, so rather than 'recover', you might 're-submit' them.

Changes in webservices while migrating from Oracle App Server to WebLogic

Dear All,
I am developing webservices for a external users.
I am new to webservices.
We were using Oracle Application server to deploy the webservices.
The architecture was as mentioned below
1) A interface class
2) A Implementation class for the above interface class
Now we are planning to migrate from Oracle application server to Weblogic Application server.
I have few doubts about the migration,
1) Will there be any difference between Oracle specific WSDL and WSDL created by Weblogic ant build command
2) As our external parties are referring our SOAP requests ans responses for their implementation, i am concerned about the changes in the SOAP request and response formats. Will there be changes due to application server change?
Oracle app server - Oracle 10g application server version 9.0.4.0
Weblogic appl server - Weblogic application server version 10.3.0.0

Now after creating the WSDL by Weblogic workshop. The previous request XML is not working.
Can someone help soving the below query.
We are in process of upgrading the Oracle 10g application server version 9.0.4.0 to Weblogic application server version 10.3.0.0. In the old application server we were using axis specific jars to create the WSDL for the webservices. There are so many third party applications which are accessing our webservices, so we can not change the wsdl, clients accessiong the webservices and the corresponding formats of request and response xml messages. So we need to deploy the same wsdl and for the same we need to deploy axis on to weblogic 10.3. Can you please help us regarding the same.
Qns
1 - If we can deploy the axis on to the Weblogic 10.3
2 - Can we use the same WSDL in the Weblogic server too.
3 - If we use the same WSDL, will it help us to keep the client accessing the webservices, the request xml format, response XML format the same as it is with Oracle 10g application server case.
4 - Please share how to deploy axis on to the Weblogic 10.3 application server.
5 - Please share how we can create EARs that can be deployed on the webserver using axis specific jars.
Thanks and Regards
Manoj

Can we use different Databases (Oracle & SQL Server) in one report?

Post Author: venki5star
CA Forum: .NET
Hi there.
Can we use different databases (Oracle & SQL Server) in a same report?
If possible how?
Another question,
Can we change the Provider Name at runtime of the given report. If so the above question is useless...
Thanks in Advance.

I tried this using Oracle Provider for OLEDB (the one that supplied by Oracle Client) and Crystal Reports 9. you can drag the column into designer but the image does not appear in preview.
I guess it's because CR does not recognized it as image, and there are no information that the blob data is an image at all.

Cannot connect to the specified SQL Server instance

I am trying to install Microsoft System Center 2012 R2 Virtual Machine Management.
I am getting the following error:
Setup cannot connect to the specified SQL Server instance.
Ensure that the server name, isntance name, and, if speceified, port number are correct. If you are installing VMM remotely, ensure that remote connections are set up correctly, and then try Setup again.
I have installed the
Microsoft® SQL Server® 2008 R2 Command Line Utilities
but have not set up any SQL Server instances.
how should i proceed?
Edit:
The followign fields are configured:
Server Name: The name of the machine i am using
Port: <empty>
Use the following credentials <NOT ticked>
Instance name <empty> (the drop down is empty)
New Database <Ticked> : VirtualManagerDB

Is SQL server is properly installed on the system?
Are you able to connect with SQL server instance?
As per the given details looks, only client utilities installed and trying to create the database which needs SQL server.
Make sure you are able to connect with the "ServerName\InstanceName,PortNumber" and hope installing the system as per below article:
http://technet.microsoft.com/en-us/library/gg610656.aspx
Hope it help!
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Setup cannot connect to the specified SQL Server instance

On a clean install domain member (Windows 2012), I am trying to setup System center 2012 VMM:
1. I installed the prerequisites as instructed during the pre-setup phase of the installation then rebooted the server (SQL Server 2012 was installed and services seem to be all started properly and SQL Configuration Manager starts as well).
2. After reboot, logged again with domain admin account and Windows update installed right away SP1 for SQL server 2012. Then I rebooted again.
3. Restarted the installation process and left default values. At the "Database configuration" step, I am leaving everything by default as well and I am getting error: "Setup cannot connect to the specified SQL Server instance. Ensure that
the server name..."
4. Tried different credentials, tried using port 1433 with no effect.
Am I missing something????
Thanks.
Benjilafouine

Definitely be sure to connect with the "ServerName\InstanceName,PortNumber". If you don't reference a port number it will try 1433 and then will connect via a dynamic port number. It is best in my opinion to always specify a specific port for each instance
to listen on in the SQL Server Configuration Manager so that you can open the fewest number of ports in the Windows firewall.

Tnsping timed out using dg4odbc from Oracle to MYSQL through ODBC

Hi,
I encountered problem when trying to connect from Oracle to MYSQL using dg4odbc, hope you can shed some light
Oracle database is 11.1.0.7 on SUSE Linux 64-bit.
Since the application which runs on MYSQL DB only offers ODBC driver on Windows platform, so I installed the 32-bit ODBC driver (from ServiceNow) on a 32-bit windows server (driver download from http://wiki.service-now.com/index.php?title=ODBC_Driver) .
created system DSN: MYSQLDEV, The DSN connection works fine. I then installed Oracle 11.2.0.1 gateway for ODBC 32-bit on the same windows server, the following configurations were done:
On 32-bit Windows server:
in gatewayHome\hs\admin
initMYSQLDEV.ora:
# HS init parameters
HS_FDS_CONNECT_INFO = MYSQLDEV
HS_FDS_TRACE_LEVEL = DEBUG
in gatewayHome\network\admin:
listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = abcdes.sda.sdva.com)(PORT = 1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=MYSQLDEV)
(ORACLE_HOME=C:\product\11.2.0\tg_1)
(PROGRAM=dg4odbc)
ADR_BASE_LISTENER = C:\product\11.2.0\tg_1
stop and started listener on windows server and check listener status
C:\product\11.2.0\tg_1\bin>lsnrctl status listener
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2012 21:42:08
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=abcdes.sda.sdva.com)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 29-MAR-2012 21:11:36
Uptime 0 days 0 hr. 30 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\product\11.2.0\tg_1\network\admin\listener.ora
Listener Log File c:\product\11.2.0\tg_1\diag\tnslsnr\abcdes\list
ener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=abcdes.sda.sdva.com)(PORT=1521)))
Services Summary...
Service "MYSQLDEV" has 1 instance(s).
Instance "MYSQLDEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
On Linux server where Oracle DB resides.
Added the following tns entry "jelly" on the Linux server ORACLE_HOME/network/admin:
jelly =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=TCP)
(HOST=abcdes.sda.sdva.com)
(PORT=1521))
(CONNECT_DATA=(SID=MYSQLDEV))(HS=OK)
tnsping from Linux server (64-bit) failed with timeout error:
tnsping jelly
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 29-MAR-2012 21:12:38
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP) (HOST=abcdes.sda.sdva.com) (PORT=1521)) (CONNECT_DATA=(SID=MYSQLDEV))(HS=OK))
TNS-12535: TNS:operation timed out
tnsping from Windows server works fine: (added same tnsnames entry on windows server for testing purpose only)
C:\product\11.2.0\tg_1\bin>tnsping jelly
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-MAR-2
012 21:45:20
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\product\11.2.0\tg_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=abcdes.sda.sdva.com)(PORT=1521)) (CONNECT_DATA=(SID=MYSQLDEV)) (HS=OK))
OK (20 msec)
if listener is not listening to the service, then the tnsping on the windows server should fail as well.
I don't know why only the tnsping from Linux failed, is it due to the 32-bit ODBC uncompatibility with 64-bit oracle server? or my configuration problem?
Of course, when I created the DB link from oracle, the connection failed with
create database link mysqldev connect to xxxx identified by "xxxxx" using 'jelly';
Database link created.
select * from tab1;
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQLDEV
Thanks for your help,

Hi Mike,
This is part of the tnsping.trc file which contains the error. IP address is in the tnsnames entry with this tnsping.
nsopen: opening transport...
nttcon: entry
nttcon: toc = 1
nttcnp: entry
nttcnp: creating a socket.
nttcnp: exit
nttcni: entry
nttcni: Tcp conn timeout = 0 (ms)
nttcni: trying to connect to socket 5.
ntt2err: entry
ntt2err: soc 5 error - operation=1, ntresnt[0]=505, ntresnt[1]=110, ntresnt[2]=0
ntt2err: exit
nttcni: exit
nttcon: exit
nserror: entry
nserror: nsres: id=0, op=65, ns=12535, ns2=12560; nt[0]=505, nt[1]=110, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsiocancel: entry
nsiofrrg: entry
nsiofrrg: cur = 53b9f8
nsbfr: entry
nsbaddfl: entry
nsbaddfl: normal exit
nsbfr: normal exit
nsiofrrg: exit
nsiocancel: exit
nsvntx_dei: entry
nsvntx_dei: exit
nsopenfree_nsntx: nlhthdel from mplx_ht_nsgbu, ctx=53a7e0 nsntx=53ade0
nsiocancel: entry
nsiofrrg: entry
nsiofrrg: exit
nsiocancel: exit
nsmfr: entry
nsmfr: 2712 bytes at 0x53ade0
nsmfr: normal exit
nsmfr: entry
nsmfr: 1528 bytes at 0x53a7e0
nsmfr: normal exit
nsopen: error exit
nscall: error exit
nscall: entry
nscall: connecting...
nsclose: entry
nsclose: normal exit
nladget: entry
nladget: exit
nsmfr: entry
nsmfr: 264 bytes at 0x528900
nsmfr: normal exit
nladtrm: entry
nladtrm: exit
nscall: error exit
nlse_term_audit: entry
nlse_term_audit: exit
Thanks,

UnDeploying EAR from Oracle App server using Ant Script

I am trying to deploy & undeploy the ear file using the ant script.
I am using the following script to undeploy the application
          <target name="undeploy" description="Undeploy Application">
          <java jar="${OCM_DIR}/jdev/lib/oc4j_remote_deploy.jar" fork="true">
               <arg value="http://${ias.host}:${ias.em.port}/${ias.dcmservlet}/"/>
               <arg value="${ias.admin}"/>
               <arg value="${ias.admin.password}"/>
               <arg value="undeploy"/>
               <arg value="${ias.oracle.home}"/>
               <arg value="${app.name}"/>
               <arg value="${ias.oc4j.instance}"/>
          </java>
     </target>
& getting the following error
[java] Initializing log
[java] Servlet interface for OC4J DCM commands
[java] Command timeout defined at 600 seconds
[java] Executing DCM command...
[java] Executing command undeploy /oramp01/app/oracle/product/devmid01 jisdev JIS_sandbox_dev UNDEFINED
[java] Command = UNDEPLOY
[java] Opening connection to Oc4jDcmServlet
[java] Setting userName to ias_admin
[java] Sending command to DCM servlet
[java] HTTP response code = 200, HTTP response msg = OK
[java] Command was successfully sent to Oc4jDcmServlet
[java] Receiving session id from servlet to check command status
[java] Session id = aa63b901712fe1d1f07cfd44380b5459eda2437e860
[java] Please, wait for command to finish...
[java] Checking command status...
[java] Setting userName to ias_admin
[java] Setting Cookie to JSESSIONID=aa63b901712fe1d1f07cfd44380b5459eda2437e860
[java] Checking command status
[java] HTTP response code = 200, HTTP response msg = OK
[java] Command has finished
[java] Receiving command exit value
[java] Receiving command output
[java] **** No output was received from command
[java] Closing connection to Oc4jDcmServlet
[java] #### DCM command did not complete successfully (-8)
[java] #### HTTP return code was -8
[java] Java Result: -8
Can you please let me know what is the problem and how can we fix it.
Both the oracle as well as the jdev/lib/oc4j_remote_deploy.jar are of the version 10.1.2.
Thanks,
Vishnu

I think you need:
<arg value="-undeploy"/>
(notice the -)
Have you had any luck?

Error while table Import from Oracle (OBIEE server 64bit & Client 32bit)

Hi All,
Problem : ODBC/OCI Connectivity Issue between OBIEE 11.1.1.6.2 BP1 (64-bit) server and OBIEE 11.1.1.6.2 BP1 Client (32-bit) local machine.
We have an OBIEE 11.1.1.6.2 BP1(64-bit) setup on a 64-bit ‘Windows Server 2008 R2 Enterprise’ machine.
OBIEE dev team members have 32-bit local machines.
OBIEE “Admin team member” (who will work on RPD) has OBIEE 11g client (BP1) installed on their *32-bit local machine*(which is common client software for 32/64 bit.)
Now, two ODBC connections were created on this 32-bit local Client machine, with OBIEE 11g client installed on it.
One with “BI server driver” for connection to OBIEE server machine(64-bit) to open RPD and other with “Oracle database driver” to connect to the Oracle database on 64-bit machine, to import tables.
With this setup done, I am able to open the RPD in online mode and view the existing sampleapp related objects present in it.
But when I try to import metadata from OBIEE client admin tool using OCI or ODBC, it gives an error that “Connection fails! “
I have the required tns entry in my tnsnames.ora file and I am able to connect to this database from the local client machine, using sqlplus.
Kindly let me know if there are any restrictions in using this type of a setup combination of 32-bit and 64-bit machines for OBIEE 11.1.1.6.2 BP1 setup.
If not then, what steps are to be followed to do the setup btw 64-bit OBIEE server and 32-bit OBIEE client to make table import working.

Hi Veeravalli.. Thanks for your response.
I have my tns file residing in both the location you mentioned on the server machine. (64-bit)
•     {Oracle_BI1}\network\admin directory
•     {oracle_common}\network\admin directory
And also in the below Oracle_home path of oracle_client in the local machine. (32-bit, Oracle 11g R2 database client)
•     {oracle_Home}\product\11.2.0\client_1\network\admin
Also, I have used the full expanded tnsnames as you mentioned. Still issue persists.
When I use , “DataDirect 6.0 ODBC Oracle Wire Protocol” driver, for creating the system DSN and try to import tables from OBIEE client admin tool on local client machine, the connection happens and table list comes up, but it’s an SAP product and hence it throws a msg to purchase the tool to go further with table import.
I am wondering if I any other configuration steps need to be carried out, with the ODBC/OCI set up between 64-bit OBIEE server and 32-bit OBIEE client.
Also, the source database that I am trying to connect to is yet again on a 64-bit machine(Oracle 11g R2).
Please suggest.

Migration from Oracle App Server 10.1.3.5 to WebLogic 12 - Expected issues?

Hi all,
the company I work for wants to migrate its Oracle Application Server 10.1.3.5 (with JRE 1.6) to WebLogic 12 and we need to guess which kind of remediation could be needed to have all web-apps still working.
The concerned applications are using dated technologies:
direct JDBC connections to db
JPA 1.0
connection pools with Oracle JDBC drivers
some apps are compiled with Java 1.4, some others with Java 1.6
servlet 2.3
JSP 2.0
We do not expect to come accross big issues but I'm not skilled on this kind of matters so I would like to receive seggestions or alerts from experts. Any remark will be appreciated.
Thank you all.
Regards,
Luca

Hi Luca,
It would be better if you asked this question in the Application Server forum which should be at this URL -
Application Server
and the general forum here -
Oracle Application Server - General
Regards,
Mike

Link from Oracle DB server to Oracle DB server

Hi,
I need some help how to link oracle db server A to Oracle db server B. It is so difficult to set it up. I kept getting error 'Could not resolve the connect identified...'
when I execute this query statement that links to B server: select COUNT(*) from [email protected]
I am currently on server A and here is the information server of server B.
Server B
DB Name: 'SafeStaging'
Domain: 'us.mycomp.com'
global Name: true
Name of db link: SAFESTAGING.US.MYCOMP.COM
From the query screen, I used the query syntax to establish the link as following:
create database link SAFESTAGING.US.MYCOMP.COM
connect to "login" identified by "password"
using 'service_staging'
In the TNSNAMES.ORA file on the server desktop, I also add these lines
service_staging =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ###.###.#.##)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME =SAFESTAGING.US.MYCOMP.COM)
select COUNT(*) from [email protected] --> get error: 'Could not resolve the connect identified...'

Thanks for the reply. But, the issue is not resolved. I still get error: 'Could not resolve the connect identifier specified'
The TNSNAMES.ORA contains this information
QSAFESTG.US.MyComp.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ###.##.###.##)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = qsafestg)
Oracle uses this information to connect this db server is fine from the UI. But, the issue when I create the database link.
create database link QSAFESTG.US.MyComp.COM connect to "login" identified by "password" using 'qsafestg'
SELECT COUNT(*)
FROM [email protected]
-----> I got an error 'could not resolve the connect identifier specifier'
on DOS command - tnsping qsafestg --> get error: 'Failed to resolve name'. --why it failed?
Then, I tried creating another link
create database link qsafestg connect to "login" identified by "password" using 'qsafestg'
SELECT COUNT(*)
FROM table1@qsafestg
-----> I got an error 'could not resolve the connect identifier specifier'
ON DOS Command: tnsping QSAFESTG.US.MyComp.COM --> Return: OK. (100ms) ?
Why do I keep getting this error: could not resolve the connect identifier specifier

Using OCI from Oracle 12 to connect to an Oracle 10 server instance

Similar Messages

Maybe you are looking for