Using quote values w/ BAPI_SALESORDER_SIMULATE

i am simulating an order with BAPI_SALESORDER_SIMULATE. When i enter the order via VA01, i get a popup that there is an open quote, and i can select thequote and get a specific price. I need to be able to, at the item level, either tell it to use any open quote price, or specify a quote number and item number.
I need to get the same price for the simulation that i get for VA01, somehow.
thanks for any help

This is really an interesting question!
You want to link the sales order item to a quote item and if a quote already exists you want to pull that price rather than repricing within the order simulation.
Can you try, passing the three reference document fields for preceding document within ORDER_ITEMS_IN table parameter, with REF_DOC = Quote, REF_DOC_IT = item and REF_DOC_CA = 'B' for quotation?
BAPI_SALESORDER_SIMULATE
Fields from TABLE: ORDER_ITEMS_IN
REF_DOC     VGBEL     CHAR     10     0     Document number of the reference document
REF_DOC_IT     VGPOS     NUMC     6     0     Item number of the reference item
REF_DOC_CA     VBTYP_V     CHAR     1     0     Document category of preceding SD document
Let me know if it takes the price for this item from the quote instead.

Similar Messages

How to use default values of variables when data get varied

Hi Expert,
I want to use default value of variables var1.
for eg. if variable length is 20 char and value is abc , then i want to fill var1 by default 20 ( after printing abc value remaining length i.e.17 should be taken by var1 means total length 20 should be occupy by var1.)
plz reply
Regards,
Jyotsna

Hello Jyotsna,
I dont really understand the example you have quoted. Can you elaborate your example?
Vikranth

Can we use the value of a variable in an alert message

I have a variable in forms6i. I want to use the value of this variable in an alert message. How is this possible?

Gul wrote:
I have a variable in forms6i. I want to use the value of this variable in an alert message. How is this possible?Try
DECLARE err_txt VARCHAR2(200) t;
al_id ALERT;
al_button Number;
BEGIN
al_id := FIND_ALERT('My_Error_Alert');
SET_ALERT_PROPERTY(al_id, alert_message_text, 'Hello how are you mr. variable '||:variable_name );
al_button := SHOW_ALERT( al_id );
END; Hope it works..
Hamid

How to use Default value in a column in Tabular form in insertion or upda

Hello,
I am trying to use Default values so that user need not have to enter data, but when I select default type and put a default value, I see an error message, if I try to add a new row.
How can I use a default value in a Column in a Tabular Form?
Gouri
Edited by: user1046395 on Apr 3, 2009 9:58 AM

Gouri,
You can just simply edit to each column's report attribute. For example,
To set default date,
Default Type: PL/SQL Expression of Function
Default: sysdate
To set default text,
Default Type: PL/SQL Expression of Function
Default: *'CLERK'*
If you still have an error, what is the error message?
Ittichai

Using null value of item

Hi All,
I use this part-of-code in pl/sql statement in a 'where' clause in order to filter records to those that took place between some hours range:
..... and to_char(STARTDATE,'HH24:MI:SS') between NVL(:P3_HOURS_FROM,'00:00:00') and NVL(:P3_HOURS_TO,'23:59:59')
P3_HOURS_FROM & P3_HOURS_TO are combo box items with LOV (0:00,0:30,1:00 ....etc that returns 00:00:00,00:30:00,1:00:00 respectively). I use a null value which is displayed as '--:--'.
when i choose some hour range the rsults are correct. the problem is when i choose null values. there is no results to the report, probably (i guess) because it somehow translate the (null) time value to the same value (and it's obvious that between same time values there isn't any result).
so i guess i use 'null' value in an inappropriate way.
Can u tell me what do i do wrong???

Are you sure you are returning NULL and just displaying '--:--' in your LOV?
If the state of your LOV is becoming '--:--' then this does not equal null in PL/SQL land.
I presume you are also submitting after changing your LOVs?
You can check the state of your items by clicking the session state in the developers toolbar at the bottom. See what your items are being set and report back!
Ben

How to use Table valued MSSQL function in OBIEE

Hi all,
Can some one help me to understand how to use table valued function in OBIEE? I want to use a table valued function (MSSQL function, with some input parameter), in the physical layer to pull the data?
I know for MSSQL Stored Procedure we can write as
EXEC SP_NAME @Parameter = 'VLUEOF(NQ_SESSION.Variablename)'
but now I have a table valued function in the query window I can get the data as
select * from myfunction(parametervalue)
In physical layer of OBIEE I have tried as
select * from myfunction('VLUEOF(NQ_SESSION.Variablename)'), but I'm getting error as the NQ_SESSION variable doesn't have a value , but actually I have initialized the variable but still Im getting error.
Can some one help me to solve this.
Thanks,
Mithun

Follow this link and try yourself. let me know for issues
Substring instr issue in obiee
Appreciate if you mark
Edited by: Srini VEERAVALLI on Feb 20, 2013 8:13 AM

Can I use the value range as F4 ValueHelp in WebUI?

Hi,
I have a Z-field in CustomerH. Its datatype has a domain with a fixed value range attached.
I show this field in the header of a sales order but the value help does not show up automatically.
My question is: Can I use this value range as input for the value help or do I have to code a "real" value help and attach it via the V-Getter?
Thanks.

Hi,
/people/tim.back/blog/2009/02/09/learn-how-to-create-drop-down-listboxes-in-crm-70s-web-client-ui
to fetch data, you can use table mentioned above. Pass domain name and language to get all values maintained in domain.
Regards,
BJ

How can I use a Value at several different places without using a long wire?

too much wire alway make program into mess.So can I use the Value in labview like using it in C.
I have try the "Local Value",but it don't work well as a Cluster. For example, I can't connect it with "Unbundle By Name" and other Cluster Tools.

Overuse of local variables is probably worse than the "mess" created by long wires. It increases memory usage, violates data flow, and increases probability of race conditions. A better solution to long wires is to make the diagram smaller by using subVIs. There's been a lot of discussion here and in the various LabVIEW style guides about avoiding local and global variables. I use them seldom and only then when I doing some complicated user interface.

How to use a value taken in a variable as a table name in a query?

I am fetching a value in a variable as:
<select application_short_name into l_appl_nm from fnd_application where application_id=:p_appl_id>
Now I need to use the value fetched in variable "l_appl_nm" as a table partition name in next query.
Can anyone please guide me on this concept.
Expecting replies asap !!

I am fetching a value in a variable as:
<select application_short_name into l_appl_nm from fnd_application where application_id=:p_appl_id>
Now I need to use the value fetched in variable "l_appl_nm" as a table partition name in next query.
Wrong.
This is NOT how partition pruning should be applied.
Expecting replies asap !!
In that case, the forum members who provide their experience and knowledge for free, expects you to PAY for that.
You want make demands on this volunteer forum? Then by the same token, payment demands can be made on you.
So.. are you going to pay up?

Can you use the value from a numeric indicator in a numeric control?

Hi!
I have to develop a code where I have to find the maximum value of a waveform and draw a line at 50% of the value. So I chose to find the amplitude of say 10 cycles of waveforms and found the maximum value out of the amplitudes.
But my real problem is, I have to use the maximum amplitude value that I get from the max. array VI and put it back in program to calculate the 50% value.
So is it possible to use the value from a numeric indicator and put it in a numeric control? Like in MATLAB or C, you give the variable a name and use it later to do any computations. Is it possible to do something similar in LabVIEW?
Solved!
Go to Solution.

Hi!
Thank you very much for taking some time out. I have been trying to do this since 2 months and I am stuck right where I am.
The situation is, I have to calculate the amplitude of the irregular waveform for a few trials and then find the maximum amplitude out of the trials and display a line at whatever % of amplitude the user chooses. I tried using property nodes but I am getting Error 1055 for some unknown reason. Then I decided to draw the line using DC offset but it turns out it calculates the amplitude each time and so the line keeps dancing everytime. Now my challenge is to have the amplitude calculated for say, 20 loops and then calculate the max from that. I ran out of ideas so I am posting here. I am using LabVIEW version 8, and I'll upload a few of my attempts. I hope I am not troubling you'll much.
Attachments:
amplitude display.vi ‏217 KB
amplitude display 1.vi ‏148 KB
Using property node.vi ‏56 KB

Using Characteristic value with Replacement path variable

Hi All,
Could you please let me know if it is possible to use charecteristic value instead of key figure with replacement path variable. My requirement is to use factory calendar id as the replacement variable on plant characteristic, now when I choose replcaement variable with Attribute value, the dropdown menu only gives the list of key figures assigned as an attributes to Plant.
Now I am looking for a solution to use factory calendar id as the attribute.
Thanks for your help in advance.
Regards
SS

Hi sachin
U can use it
Look at these links
Re: Customer exit & Replacement path........?
Variable with Replacement Path
Re: Replacement Path for Charastrictics Variable
http://help.sap.com/saphelp_nw04/helpdata/en/03/6ba03cc24efd1de10000000a114084/frameset.htm
Regards
KR

Using the value "Image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of preconfigured file types (.jpe, .jpg, .jpeg, .?

On a form, using the value "image/*" for the accept attribute of the HTML input Element, how can I add .pdf to the array of pre-configured file types (.jpe, .jpg, .jpeg, .gif, .png, .bmp, .ico, .svg, .svgz, .tif, .tiff, .ai, .drw, .pct, .psp, .xcf, .psd, .raw)?
Say I wanted to add .gif, .jfif or .ico. I find this array limited, how can I add types to image?
<input type="file" name="file" accept="image/*" id="file" />
mimeTypes.rdf does not seem to allow this.

''mimeTypes.rdf'' has nothing to do with web development. It's a file that stores your file handling preferences (e.g. if you want ZIP files automatically saved or opened).
You can't change the file types of the pre-defined content specifiers (audio/*, video/*, image/*), but you can specify additional MIME types. To add PDF to your above example,
<pre><nowiki><input type="file" name="file" accept="image/*,application/pdf" id="file" /></nowiki></pre>
For details, see
* [https://developer.mozilla.org/En/HTML/Element/Input developer.mozilla.org/En/HTML/Element/Input]

Problem using default value of report parameter 1 to validate parameter 2 passed in to report

I am having a problem with an SSRS report using the default value of report parameter 1 to validate parameter 2 passed in to report (via C#) instead of using the value of parameter 1 that is also passed into the report. Here are the
simplified details:
Using SSDT, SQL Server 2008 R2
SSRS report has 2 parameters:
P1 -- text, hidden, default value 'R1', ... front-end C# code can pass 'R2' or 'R1'
P2 -- text, allows multiple values, list of available values provided by stored procedure (sproc_list) that takes P1 value as a parameter. Hence, sproc_list either provides a list for P1 = 'R1' or P1 = 'R2'.
List for P1 = 'R1' is 'A', 'B', 'C'
List for P1 = 'R2' is 'A', 'B', 'D'
Values for P1 and P2 can be passed in via C# to the report.
The C# front-end displays 2 report choices to the user, R1 and R2, where both choices call the same RDL; but choice R1 passes in 'R1' for P1, and the choice R2 passes in 'R2' for P1.
Upon a users 1st time use of the report no parameters are passed in. Then when the user exits the report, the parameter value for P2 that was chosen is saved off to a file for R1 or R2, and used the next time the user selects the report.
Everything always works fine for report R1 since the default value for P1 is 'R1'.
When R2 is chosen and the user selects 'D' as the value for P2, runs the report, then exits, the P2 value of 'D' for R2 is saved to a file. When the user returns the next day to run report R2, 'R2' is passed for P1, and 'D' is passed for P2.
This is when the problem occurs. The value of 'D' for P2 is validated against a list generated for P2 based on the default value of 'R1' for parameter P1. Hence, SSRS considers 'D' an invalid value for P2 and blanks out the P2 parameter.
The user can then use the drop down list for P2 and choose 'D', but this defeats the purpose of saving the parameter values to be used the next time.
Why is the stored procedure that provides a list of available values for parameter P2 using the default value of 'R1' for parameter P1 instead of using the value of 'R2' passed into the report for parameter P1?

Hi Tom,
Sorry for my delay.
If I understand correctly, you have two parameter in your report. It is a couple of cascading parameter. If we have choose ‘R1’ of P1, the P2 values is A, B, C. ‘R2’ of P1, corresponding P2 values is A, B, D. What your requirement is to save the end use
select option of these two parameters.
In SSRS, if we have configure the parameter with default value. When we run the report, the parameter will fill with the default value to filter data. If we want to save the last status we are render the report, we need to update the default value of P1.
If we are query the default value from database, if possible, we can
update the database try to resolve the issue. Alternatively, we can set the dynamic default value for the parameter.
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Can I use the value returned from a Text Function in another Formula?

I'm writing a report in Hyperion System 9 BI + Financial Reporting Studio version 9.2. I have 2 grids in my report.
Grid1 Column A is set up as a text function using the function type - <<GetCell("Grid2", 1, a, 1)>>. I would like to use the values returned from this text function in Column A (Grid 1) in a formula in Column B (Grid 1).
Is it possible to use the values returned in Column A of the text function in another formula? My report does not seem to recognize Column A as numerical values, even though the values to be returned are numerical.
If so, how do I recognize the values in Column A Grid 1 as numerical values and not text?
Thanks for any help you can offer!

Hi Edson,
Yes you need to use the CALC_ERROR macro function to be able to test whether the last macro function returned an error. CALC_ERROR will return an 'X' if there an error occured during the execution of the last macro function.
You can use a macro similar to the following:
IF
CALC_ERROR( )
= 'X'
      DO SOMETHING HERE
ENDIF
Let me explain how this works internally. The SAP system maintains a global variable g_flg_calc_error during the execution of macros in the planning book. The g_flg_calc_error variable will contain the value of f_calc_error that was set by the last macro function which executed. The ABAP coding of a planning book is something like this:
data: g_flg_calc_error type /SAPAPO/FLAG.
* SAP will pass g_flg_calc_error variable to all macro
* functions. When SAP calls a macro function, it does
* something like this.
call function '/SAPAPO/MACRO_FUNCTION_HERE'
        exporting
          plob_values      = i_s_adv_plob_values
          sdp_book         = g_c_advf_sdp_book
          sdp_view         = g_c_advf_sdp_view
        tables
          cols_index       = i_t_cols
          value_tab        = l_t_value_tab
        changing
          f_calc_error     = g_flg_calc_error
As you can see, the g_flg_calc_error variable
is passed in the "changing" part of the call. The macro function being called can then use the f_calc_error
variable to change the value of the global
g_flg_calc_error variable. In fact, the macro function being called can also check (by looking at the f_calc_error variable) if the last macro function reported an error. The CALC_ERROR macro function just checks the value of f_calc_error parameter (w/c in fact is the value of the g_flg_calc_error variable) and returns "true/X" if the f_calc_error was set to true by the last macro function.
Hope this helps in clearing things out

Using column value is it possible to find the table name in the database?

Hi all,
using column value is it possible to find the table name in the database?
guys i need the table value
Note:
oracle-9i
for example:
i don't know NIC(column value) in which table in the database.
Thank you,
with regards,
JP.
Edited by: Guest on Feb 27, 2012 5:42 AM

Hi,
As far as I understand what you are asking for I would suggest 4 data dictionaries that will help you to know the table name from the column names
1. USER_TAB_COLS
2. ALL_TAB_COLS
3. DBA_TAB_COLS
4. COLS
These can give you detail information about the columns and respective tables at user, schema, dba level. Further information on the table can be found by querying ALL_OBJECTS table giving table_name as Object_name, or you can join the data dictionaries too.
To know about various data dictionaries avalible in Oracle please query select * from cat;
Let us know if you need further assistance.
Twinkle

Using quote values w/ BAPI_SALESORDER_SIMULATE

Similar Messages

Maybe you are looking for