How to use a value taken in a variable as a table name in a query?

I am fetching a value in a variable as:
<select application_short_name into l_appl_nm from fnd_application where application_id=:p_appl_id>
Now I need to use the value fetched in variable "l_appl_nm" as a table partition name in next query.
Wrong.
This is NOT how partition pruning should be applied.
Expecting replies asap !!
In that case, the forum members who provide their experience and knowledge for free, expects you to PAY for that.
You want make demands on this volunteer forum? Then by the same token, payment demands can be made on you.
So.. are you going to pay up?

Similar Messages

Using column value is it possible to find the table name in the database?

Hi all,
using column value is it possible to find the table name in the database?
guys i need the table value
Note:
oracle-9i
for example:
i don't know NIC(column value) in which table in the database.
Thank you,
with regards,
JP.
Edited by: Guest on Feb 27, 2012 5:42 AM

Hi,
As far as I understand what you are asking for I would suggest 4 data dictionaries that will help you to know the table name from the column names
1. USER_TAB_COLS
2. ALL_TAB_COLS
3. DBA_TAB_COLS
4. COLS
These can give you detail information about the columns and respective tables at user, schema, dba level. Further information on the table can be found by querying ALL_OBJECTS table giving table_name as Object_name, or you can join the data dictionaries too.
To know about various data dictionaries avalible in Oracle please query select * from cat;
Let us know if you need further assistance.
Twinkle

How to use Special value set with Column clause to display addtional column

hi
can anyone tell me
How to use Special value set with Column clause to display addtional column
how can i use FND POPID and with COLUMN clause ?

Dear Yaseen,
To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
And mark the cumulative check box underneath.
I hope you get the desired result and please do me favour .
Sumit goomber

How to use hashtable values

if i get all lovsession results in to a hash table
how to use them
i mean how to use the value of particular field in hash table(lov ).

I'm not clear what exactly are you looking for? Is it just the printing/reading of values in hashtable or some interaction of those values with beans?
--Shiv

Reposting:urgent....how to use hashtable values

Hi
if i get all lovsession results in to a hash table
how to use them
i mean how to use the value of particular field in hash table(lov ).
is it <hashtable>.get(object name);
if it is what should be my object name...is it VO attribute of LOV???or the Id in that lov page??
please help me out..
Regards
Sandeep.G

if(pageContext.isLovEvent())
String lovInputSourceId = pageContext.getParameter(SOURCE_PARAM);
Hashtable lovResults = pageContext.getLovResultsFromSession(lovInputSourceId);
if (lovResults != null)
value = (String) lovResults.get("<Lov Item Name>");
}

How to Replace Null Value as 0 in an OBIEE11g Pivot Table?

Hi,
How to Replace Null Value as 0 in an OBIEE11g Pivot Table? it's working in obiee10g version.
We have tried below methods
1) criteria tab and edit the ‘column properties’ associated with your fact measure. Choose the ‘Data Format’ tab, tick to override the default format and choose ‘Custom’.
It seems that the syntax for this custom format is positive-value-mask (semi colon) negative-value-mask (semi colon) null-mask. So this means we have a few options.
E.g. if you want zeros (0) instead of null then enter:
#,##0;-#,##0;0
2) in that formula columns we have put it below case condition also ,
Measure Column: Nom_amt --> edit formulas
CASE WHEN Nom_amt IS NULL THEN 0 ELSE Nom_amt END
3) we have uncheked IS NULL check box in the admin tool also
I tried above formats still it's not working for me..kindly help me on this..
thanks in advance...
Best Regards,
R.Devarasu

Hi Amith,
I have update your suggested one,but it's working few of the rows only..remainings rows some of cells still NULL only
Measure colmns is : Nom_SGD
IFNULL(Nom_SGD,0.00)
Movment : dynamic date calc by using $2-$1 oracle formula's
Actually i am doing below things only,
31/12/2011 31/03/2011 Movment
Country
India 100 -50 -150
Singapore 200 200
UK 1200 -1200
USA 0.00 0.00 0.00 (here changed null as 0)
Helpmeon this...

How to call & pass values to custom page from seeded page table region

Hi All,
can anyone tell me how to call & pass values to custom page from seeded page table region(Attribute is not available in seeded page VO)
it is urgent. plssss
Regards,
purna

Hi,
Yes, we do this by extending controller, but you can also try this without extending controller.
1. Create Submit Button on TableRN using personalization.
2. Set "Destination URI" property to like below
OA.jsp?page=/<yourname>/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}&employeeName={@EmployeeName}&retainAM=Y&addBreadCrumb=Y
Give your custom page path instead of EmpDetailsPG.
EmployeeId and EmployeeName are VO attributes(Table Region)
If you dont have desired attribute in VO, then write logic in your custom page controller to get required value using parameters passed from URL path.
In this case, only personalization will do our job. Hope it helps.
Thanks,
Venkat Y.

How do I pass value to 'getURL' url variable

Howdy,
I`m trying to launch a popup from a flash form using MX 7
The popup works fine but I cant for the life of me work out how to pass 'theid' value to the url variable for the popup window.
I think somthing like this can be done with action script and maybe a cfc but I really dont know how.
You will notice I referenced 'theid' value directly, I know this will never work but just wanted to show what i was trying to acheive. If I were using a HTML form I could use some javascrip to get the element by id and append the value to the url. Is there away to do this in action script?
<cfform format = "flash">
<cfsavecontent variable="ticketpopup">
getURL("javascript:window.open('supportdetails.cfm?id=#theid#' , 'TicketDetails', 'width=900,height=630, Scrollbars=1, resizable=0'); void(0);"); </cfsavecontent>
<cfselect name="selectbox" query="thequery" value="id" display="whatever"></select>
<cfinput type="hidden" name="theid" bind="{selectbox.selectItem.data}">
<cfinput type="button" name="mybutton" value="whatever" onClick="#ticketpopup#>
</cfform>
Any help, much appreciated :-)
Thanks

I answered my own question, heres is a solution if anyone is interested..
You can add the following actionscript to the onChange attribute of the select box. Its passes the value of the selected index to the URL and opens in a new window :-)
No there is no need for a hidden field or a button either
<cfform format ="flash">
<cfselect name="name" query="thequery" value="thevalue" display="whatever">
onChange="getUrl('supportdetails.cfm?ticketnumber=' + categorysubject.dataProvider[categorysubject.selectedIndex]['data'],'_blank');
</cfselect>
</cfform>

How to Replace Null Value as 0 in an OBIEE11g Pivot Table? it's working 10g

Hi,
How to Replace Null Value as 0 in an OBIEE11g Pivot Table? it's working in obiee10g version.
We have tried below methods
1) criteria tab and edit the ‘column properties’ associated with your fact measure. Choose the ‘Data Format’ tab, tick to override the default format and choose ‘Custom’.
It seems that the syntax for this custom format is positive-value-mask (semi colon) negative-value-mask (semi colon) null-mask. So this means we have a few options.
E.g. if you want zeros (0) instead of null then enter:
#,##0;-#,##0;0
2) in that formula columns we have put it below case condition also ,
Measure Column: Nom_amt --> edit formulas
CASE WHEN Nom_amt IS NULL THEN 0 ELSE Nom_amt END
3) we have uncheked IS NULL check box in the admin tool also
I tried above formats still it's not working for me..kindly help me on this..
thanks to do the needfull
Best Regards,
R.Devarasu

Hi,
Null value in database displaying as 0 in report, I need to keep value as in database, and I have one calculated row which is based on null values should also null in report.
but it showing 0 for null values also so, my calculated row showing wrong result.
my report is like
col1 col2
ABC 0
BCD 12
DEF -12 --this is calculated row.
I require result like:
col1 col2
ABC null
BCD 12
DEF null --this is calculated row.
Please let me know how I can achieve this.
Thanks,
Rahul

How to use complex function as condition in Oracle Rule Decision Table?

How to use complex function as condition in Oracle Rule Decision Table?
We want to compare an incoming date range with the date defined in the rules. This date comparison is based on the input date in the fact & the date as defined for each rule. Can this be done in a decision table?

I see a couple of problems here.
First, what you posted below is not a syntactically valid query. It seems to be part of a larger query, specifically, this looks to be only the GROUP BY clause of a query.
Prabu ammaiappan wrote:
Hi,
I Have a group function in the Query. Below is the Query i have used it,
GROUP BY S.FREIGHTCLASS,
R.CONTAINERKEY,
S.SKU,
S.DESCR ||S.DESCRIPTION2,
S.PVTYPE,
RD.LOTTABLE06,
R.WAREHOUSEREFERENCE,
RD.TOLOC,
R.ADDWHO,
R.TYPE,
S.CWFLAG,
S.STDNETWGT,
S.ORDERUOM,
R.ADDDATE,
C.DESCRIPTION,
(CASE WHEN P.POKEY LIKE '%PUR%' THEN 'NULL' ELSE to_char(P.PODATE,'dd/mm/yyyy') END),
NVL((CASE WHEN R.ADDWHO='BOOMI' THEN RDD.SUPPLIERNAME END),SS.COMPANY),
RDD.BRAND,
S.NAPA,
RD.RECEIPTKEY,
R.SUSR4,
P.POKEY,
RDD.SUSR1,
r.STATUS, DECODE(RDD.SUSR2,' ',0,'',0,RDD.SUSR2),
rd.SUSR3Second, the answer to your primary question, "How do I add a predicate with with a MAX() function to my where clause?" is that you don't. As you discovered, if you attempt to do so, you'll find it doesn't work. If you stop and think about how SQL is processed, it should make sense to you why the SQL is not valid.
If you want to apply a filter condition such as:
trunc(max(RD.DATERECEIVED)) BETWEEN TO_DATE('01/08/2011','DD/MM/YYYY') AND TO_DATE('01/08/2011','DD/MM/YYYY')you should do it in a HAVING clause, not a where clause:
select ....
from ....
where ....
group by ....
having max(some_date) between this_date and that_date;Hope that helps,
-Mark

How To select maximum Value in a specifieid field in internal table.

How To select maximum Value in a specifieid field in internal table?

Step : 1
Sort itab by <Field1> descending.
Just sort the internal table by the field.
STEP: 2
Then read the table at index 1.
Read table itab index 1.
ITAB-FIELD = MAX . " Max field will come in the first row of the internal table.
Regards,
Gurpreet

How to assign table name for select query in loop.

Hi friends my requirement is count the no of records of all the database table which comes into an internal table ."Check the below coding". Iam fetching the tables from dd03l table into an internal table .plz give me a sujjesion how to assign a table name in select query in a loop.
SELECT tabname FROM dd09l
            INTO TABLE i_dd09l
            WHERE protokoll = 'X'.
IF sy-subrc = 0.
    SORT i_dd09l BY tabname.
ENDIF.
LOOP AT i_dd09l.
    SELECT COUNT(*) INTO val FROM i_dd09l-tabname.
    IF sy-subrc = 0.
      i_dd09l-count = val.
    ENDIF.
    MODIFY i_dd09l INDEX sy-index.
    CLEAR val.
ENDLOOP.
error : 'I_DD09L-TABNAME' is not defined in the abap dictionary as a table.

data: dy_table type ref to data,
      dy_line type ref to data,
      xfc type lvc_s_fcat,
      ifc type lvc_t_fcat,
      dy_field type ref to data.
LOOP AT i_dd09l.
perform get_structure using i_dd09l-tabname .
CREATE DATA dy_table TYPE TABLE OF (_dd09l-tab_name).
    UNASSIGN <dyn_table>.
    ASSIGN dy_table->* TO <dyn_table>.
SELECT COUNT(*) INTO val FROM <dyn_table>.
IF sy-subrc = 0.
i_dd09l-count = val.
ENDIF.
MODIFY i_dd09l INDEX sy-index.
CLEAR val.
ENDLOOP.
form get_structure using p_table.
data : idetails type abap_compdescr_tab,
xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( p_table ).
idetails = ref_table_des->components.
loop at idetails into xdetails.
    clear xfc.
    xfc-fieldname = xdetails-name .
    xfc-datatype = xdetails-type_kind.
    xfc-inttype = xdetails-type_kind.
    xfc-intlen = xdetails-length.
    xfc-decimals = xdetails-decimals.
    append xfc to ifc.
endloop.
endform.                    "get_structure
Try like this hope it will work.
Regards,
madan.

How to use rounded values in BEx Formulas

Hello,
I have the following question. Is it possible to use rounded values up to a certain # of decimal points in BEx Formulas?
I have the following problem.
Consider this:
keyfigure val 1 = 0.416666667
keyfigure val 2 = 72
val 3 (BEx Formula) = val 2 / val 1 = 172.799999862
However, what I need to do is this.
val 1 & val 3 should rounded up to 2 decimal points. So, I really need the report to show this:
val1 = 0.42
val2 - 72
val 3 = val 2 /val 1 = 171.43
I changed the number of decimal places on val 1 and val3 to be 0.00. However, it appears that these rounded values are not taken into account in the Formulas, as if the OLAP still uses the original values from the backend with 9 decimal points. So, no matter how many decimal points I use on the Display tab for a key figure, my val3 or result of my formula is always taking into account the 9 digit decimal values, not rounded values that I want. So in the example above, my val 3 comes to 172.80, which it should be 171.43 instead of you use the rounded values in the calculation.
Please let me know if there is any workaround where I could force my BEx Formula to utilize the rounded values and not actual values from the backend DSO. Or any other solution.
Thank you

If you create a Formula in BEx Query Designer like the one below, it works:
val3 = val2 / ( TRUNC ( ( val1 * 100 + 0.5 ) ) / 100 )
The TRUNC function (among other things) actually ensures that your formula takes into account the rounded values that you want.

How to use Copy-Value function?

Dear Friends,
I have query on how to use Standard function Copy-Value.
Please have a look @ the help.sap.com example use of Copy-Value function.
http://help.sap.com/saphelp_nw70/helpdata/en/26/d22366565be0449d7b3cc26b1bab10/content.htm
I have designed the same example. Please see the mapping I've defined for this example :
http://www.flickr.com/photo_zoom.gne?id=930440086&size=o
Please see the resuts, its working perfectly. See the top image :
http://www.flickr.com/photo_zoom.gne?id=930440300&size=o
Ok, now lets come to the issue. Please consider the same example , If I have more than one partner
and I want to use the address field to the customer street,city & zipcode using copy-value function, how will I achieve this?
Please see the resuts.See the bottom image :
http://www.flickr.com/photo_zoom.gne?id=930440300&size=o
I think you all got the issue, if not please reply back.
Looking for your answers!!!
Best regards,
raj.

The CopyValue function considers only values in the first context of the queue.
When the queue has more contexts, the other contexts are ignored.
In online help, the element addrDat is 3 times under name, that means 3 values are in the first context.
That means: For the first occurrence of the partner it is correct, for all other partners, the values of the first context is taken. The online help does not express this, so it is misleading and should be changed to an example where address is not beyond a node with occurrence inbounded.
In practical cases the copyValue can only be used for values that appear in source just one time, like the IDOC header fields, as it works like a constant.
Regards
Stefan

How to use acquired values for different treatments with NI 9188 cDAQ

hi guys, I am trying to use NI DAQ 9188 chasis with 9214 temperature measurement module. I wired 3 modules to the module and split signals. But I am not sure that I can these values into functions vis easily. I am trying to convert them into 1D array, but when I converted to the 1D array I can not see the values and use separetely from each other. For example, I want to multiply just the first value taken from 1st thermocouple. how could I do this. Additionally, the signals in the waveform chart 1 is not smooth. what is the reason of this? thanks in advance.
Egemen
Solved!
Go to Solution.
Attachments:
DAQ_v1.vi ‏82 KB

Hi newbieeng,
It sounds like what you want to use is the Index Array function. You should use the Convert From Dynamic Data function on the signal coming from the DAQ Assistant and then use the Index Array function to access the apropriate data on which you would like to operate. Please refer to the help documentation for more information on the Index Array function. As far as smoothening the signal, try adjusting the properties of the graph, such as Autoscale X and some others in the Properties window.
Regards,
James D.
Applications Engineer
National Instruments

How to use a value taken in a variable as a table name in a query?

Similar Messages

Maybe you are looking for