Using QUSER to get LOGON TIME of an user

Hi,
I am trying to fetch logged in user's last logon time using QUSER command. I am using Visual Studio 2010 for development and i was able to fetch the value when i set the target platform of my project to AnyCPU.
After modifying the target platform to x86 (to make it as a 32 bit application), QUSER command is not working in 64 bit machines. I couldn't find out any possible threads to refer as a solution. Anyone have a solution for this?
Thanks in advance.

Hi VinothSundaram,
I we set the target platform of the project to AnyCPU, it will run in x86 mode in 32-bit machines and x64 mode in 64-bit machines. But for target platform x86, the application will always run in 32-bit mode.
In 64-bit machines, the QUSER application is located in C:\Windows\System32, if the application runs in 64-bit mode, it'll start the QUSER from this location. However, 32-bit application will be directed to C:\Windows\SysWOW64 directory, that's why it cannot
find QUSER application. To resolve this problem, the best way is to change the target platform to AnyCPU or x64.
Please see this documentation for more information:
File System Redirector
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.

    When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.

    Have you ever created a user dictionary? You have to manually create one, AppleWorks won't do for you. The user dictionary & any other dictionaries belong in the AppleWorks Essentials folder which belongs in the AppleWorks 6 folder in Applications.
    Deleting & reinstalling AppleWorks from the original disk will not delete your files unless you have saved them in the application folder. The Mac OS creates a separate Documents folder for your files & that is where the documents you created should be.
    Unless all of your documents are AppleWorks 6 word processing documents, Pages alone is not sufficient. The iWork applications - Keynote, Pages & Numbers - can only open AppleWorks 6 presentation, word processing & spreadsheet documents, respectively. They will not open any other type of AppleWorks 6 files or any AppleWorks 5 or any version of ClarisWorks files.

  • Using IE but getting Mozilla/4.0  in user-agent header

    I am using IE but am getting following while printing headers. Why?
    Name: user-agent
    Value: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)

    This string is correct. You're using a mozillacompatible (Moz 4.0) useragent IE 6.0 (MSIE 6.0) on Windows XP (NT 5.1). For FireFox it should look like:Mozilla/5.0 (Windows; U; Windows NT 5.1; nl; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4Maybe you need to read something more about the useragent strings. This has actually nothing to do with Java nor servlets.

  • How to get the Time Stamp if we use User Status

    Hi Gurus,
    We used User Status to control several Orders. Now we are required to get the "time stamp" when we change from one status to another, is that information available in the system?
    If not, how do we get the time when a user status is changed from one to another?
    please advice,

    Hi,
    To check such kind of changes you have to follow below path,
    Go to Status tab (Blue Ikon) --- >Extra -> Change Documents-> All- --- > Choose All Changes
    SAP note 390635 provide the possibility to write change records for process and production orders as modification.
    please refer this link also,
    [Link|https://www.sdn.sap.com/irj/sdn/profile?userid=3781605]
    Regards,
    R.Brahmankar

  • Time Capsule # of Users Backing Up Limit?

    Is it documented anywhere the limit on how many users can be backing up to the Time Capsule (using Time Machine) at once? I know that the Extreme stations can handle up to 50 users at one time on the wireless network, but I'm wondering about the load users additionally place on the same network with Time Machine backups. I manage a network that uses 1 Time Capsule with about +/- 30 consecutive wireless connections (for Internet/Intranet usage) and about 10 of them also using the same network for Time Machine (# of users on network has grown by a few the past 3 months). Recently (possibly with the addition of a few more on the Time Capsule/Time Machine) the download speed of the Internet has dropped quite a bit, while it's perfectly fine when everyone is gone (laptops) from the office. Does anyone have any insight/experience on this issue? Thanks!

    Welcome to the discussions, Robert!
    There's not any documentation that I've seen regarding the number of users than can be backing up to the Time Capsule at one time.
    But, if you remember that by default, each computer that is set up for hourly Time Machine backups. If it's a normal "incremental" backup of 5-6 minutes on average and you have 10 users backing up, the TC is really busy all the time with just backups. So 8-10 is probably a practical limit.
    More data is being transferred during a backup than simple online activity, so this slows down the network.
    You might want to take a look at Time Machine Editor, which will allow you to schedule backups whenever you like. If you set up each user to backup only once or twice a day instead of hourly, you would free up a lot more bandwidth for users on the wireless.
    http://timesoftware.free.fr/timemachineeditor/
    I'm not sure if it will work with Snow Leopard, but can verify that it will work nicely with Leopard.

  • I have an old ipod that i have not used in a very long time, ive had it on a charger now for over an hour and i still cnnot get my ipod to turn on, how can i fix my problem, i just downloaded the new version of itunes aswell, so i know its not my itunes.

    i have an old ipod touch that i have not used in a very long time, and im having trouble gettign it to turn on. ive had it on a charger for over an hour now and still nothing hs changed. i just updated my itunes to the current version they haev so i know its not an itunes problem its rather a problem with the old ipod touch itself. im leaving for deployment soon and im trying to get this fixed without having to send it in. If anyone has any ideas on how to get this thing turned on it would be greatly appreciated.

    Well, two thoughts.
    The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
    The battery has deep discharged and is now dead. It will never recharge and should be replaced.
    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
    The flat fee for a battery exchange is, I believe, $99.00 USD.

  • HOW CAN I GET THE TIME IN EXCEL SHEET USING WRITE TO MEASUREMENT INSTRUCTION

    HI, I am using GET TIME IN SECONDS ,and after that i placed SECONDS TO DATE /TIME instruction ,and i had taken a write to measurement file instruction
    to get the time in excel sheet. Now i am not able to connect write to measurement source to seconds to date and time output . Is there any solution.
    I am attaching my VI file also.
    Attachments:
    TEST.vi ‏43 KB

    Hi
    Im using Labview 8.2. Currently it just shows the data without the time. Im not sure what to do. It works perfectly though. I just want the time to appear on my notepad along with my data
    holla
    Attachments:
    Testing1.txt ‏1 KB
    Untitled 231_LV80.vi ‏23 KB

  • Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working  you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

    trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working  you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
    I already Uninstalled and reinstalled the product and it still does not work.

    Hi,
    Try to uninstall the software again and you have to manually
    Delete the following folders:
    [Startup Disk]/Library/Application Support/Adobe/Adobe PCD
    [Startup Disk]/Library/Application Support/Adobe/caps
    [Startup Disk]/Library/Application Support/Adobe/backup
    [Startup Disk]/Library/Preferences/FLEXnet Publisher/
    [Startup Disk]/Library/Application Support/FLEXnet Publisher/
    Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
    After that try to run the cleaner tool as mentioned by kglad.
    Restart machine and then try to install again.
    *** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

  • Using Apple TV for first time - to rent a movie.  Logged in successfully - billing info updated.  Keep getting message to log into Itunes on PC - movie won't load on TV

    using Apple TV for first time - to rent a movie.  Logged in successfully - billing info updated.  Keep getting message to log into Itunes on PC - movie won't load on TV -
    any advice?

    3GB for a movie? That's almost equivalent to an original DVD. 
    Have you checked in the Recently Added playlist?
    I think this is possibly linear.  Select 'normal' in HB, iTunes accepts it; select 'high quality' in HB iTunes doesn't.  I can't say why; I don't have any video that anywhere approaches 3GB in size.  If that's how iTunes behaves I don't see you have too many options.  You either select normal and it works, or you select HQ and live with playing the movie outside of iTunes.
    I won't ask what movie because any help with illegally ripped copy protected DVDs is strictly prohibited by the Terms of Use so I'm assuming this is a 6 hour video of your puppy playing on the floor.

  • My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 20

    My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 2010 and I have since misplaced the disk.
    How do I fix the problem?

    Hi Ali,
    You can download Acrobat 9 Std. from: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
    and reinstall the software.
    Regards,
    Rave

  • Oracle 10.2.1.4.0: Getting alerts like User logon time is 4007.29 secs

    Hi Team,
    Im getting alerts like User logon time(msec) is 4007.29 secs & Session 291 is blocking other 13 sessions via OEM.
    Im unable to find out the SID 291,to check which process has blocked the resources.
    Please suggest us on above two quires.
    Database : Oracle 10.2.1.4.0
    Thanks in Advance!

    Hello Anthony,
    even maybe not on Windows (I faced this on Unix), proceed with invalid objects as in : Note 1453935 - Invalid DataPump objects after Windows patch collection > 25
    this is the leftover of some previous 10g patching. Once objects are recreated, recompilation will go ok.
    Regards,
    Igor

  • Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn't complete the backup to "G-RAID". to complete backup. An error occurred while creating the backup folder.

    Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn’t complete the backup to “G-RAID”. to complete backup. An error occurred while creating the backup folder."
    Any idea what I should do?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the search box.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • I can't get my ipad3 to backup using iCloud.. It times out right at the end of backup

    I can't get my ipad3 to backup using iCloud.. It times out right at the end of backup. The blue bar nearly fills up and right at the end a message pops up saying the backup could not be completed.

    Tried that.. No joy. Just tried to synch again with iCloud . The bar gets nearly to the end and then stops. Says below it - estimated time remaining.... I'm confused. If I synch to my computer is this the same as synching to iCloud. It's shame it's doesn't work!

  • I have been using Itunes Apps for some time. Today I signed to Itunes to get Apps updated. Apple said I must update my account. I did that with a new password. Itunes said invalid support. Now what can I do?

    I have been using Itunes Apps for some time. Today I signed to Itunes to get Apps updated. Apple said I must update my account. I did that with a new password. Itunes said invalid support. Now what can I do?

    What do you mean "invalid support"? What EXACTLY did it say? Did it say you had an unsupported SIM after updating the firmware on your phone?

  • In version 3.x.x I used to be able to type search terms into the address bar and the page would load, similar to Google's "Feeling Lucky" button. Now it just brings up a Google search for the terms I typed in. How can I get this time saving feature back?

    In version 3.x.x I used to be able to type search terms into the address bar and the page would load, similar to Google's "Feeling Lucky" button. Now it just brings up a Google search for the terms I typed in. How can I get this time saving feature back?

    The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
    To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
    [http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
    If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name

Maybe you are looking for