Using RSL and Deploying SWZ files

Hi
I developed a Flex Application on my local machine and used
signed Adobe Framework RSL. It works perfect on my machine and
creates the Flash Player Cache on my machine.
Now when I deploy the same application on my server with the
swf files and the swz files the application is not able to create
cache on the client machine. (its not able to use the framework.swz
file and uses the failover framework.swf files)
I did a lot of reading which says that I should create a
cross domain policy file etc.
http://livedocs.adobe.com/flex/3/html/help.html?content=rsl_09.html
Can somebody please help me and tell me how can I deploy my
application on my server?
and what exactly should I put in my config files and in my
crossdomain.xml file?
Thank you

Hi Sudheer,
You are going right. And as Nash said the Portal server didnt get restarted when you deploy your par file. I generally follow different steps to deploy and run par file. Have a look, may be this could help you. When I deploy and run par files it doesnt take more than half a minute.
Steps:
1) Save project. Right click and "Quick par Upload".
2) On your browser type
"http://<b><your_server_name>:</b>50000/irj/servlet/prt/portal/" or same page you can get by navigating:
System Administration-> Support-> Portal Runtime-> Administration Console.
3) At the option "Please specify a Portal Archive file (PAR) and press "upload" to store it into the PCD." Deploy your par file by giving the path.
4) On your portal. Follow the path: Content Administrator-> Portal Content -> Portal Content(sub-option). Right click -> New from par ->iView.
5) Here in the list you will find the par file which you have uploaded. Proceed as said.
6) You will finally have an iView. Right click it and preview it.
Next time you make changes to the application just create a par and deploy it in the same way and Preview directly, no need to follow step 4,5. For previewing follow the step 6 again.
Hope this helps you. If still the problem exist then let me know.
Regards
Pravesh
PS: Please dont forget to reward points for helpful answer.

Similar Messages

Anyone using WLST to deploy RPD file?

Anyone using WLST to deploy RPD file?
I dunt want to deploy the RPD files manually every time,so i need it automatically deploy to BI .Seems WLST can do it.Some one had tried this ?
Any help is appreciated.

http://wlst101.blogspot.in/2011/08/wlst-obiee-upload-rpd.html
I hope you are looking for this..

Create and deploy sda file in NWDS 7.0

Hi,
Could u pls tel me how to import , create and deploy sda file.
I hav got an .sda file, i need to import ,made changes to that nd deploy it again in NWDS 7.0
help me by providing some links or turorials...
thanks
raji

Hi,
As i told you earlier, there is no option to import a .sda file in NWDS 7.0.
So you have to follow the approach which i mentioned in your earlier thread.
https://www.sdn.sap.com/irj/scn/profile?userid=3978830
That is the only way which you can do.
Regards,
Saleem

HOW TO CREATE AND DEPLOY EAR FILE WITHOUT HAVING ACCESS TO DATABASE

I created an application using jsp and bc4j. I tested it against a standalone OC4j server on the same pc. This week I installed 9iAS to simulate the installprocess which should be due next week. Everything works fine; deploying seems to be a peace of cake... until I realized that the customer's database,
host etc. are not the same as in my testing environment.I tried to create a connection in JDeveloper with the customer's database hostname and SID. This
does not work; the host is not known in my development enviroment. So how can I create an EAR file with the correct connection (ie, pointing to customer's host
and SID)?

You could use datasources. You should do this in your BC4J Configuration. Then when deploying your applicaiton use the command -installDataSource (from admin.jar) to create the right datasource.
You could probably use the name of your connection + "DS" so you can also use it locally in JDeveloper as JDev seesm to create this automaticly for your Connections.

Ias console and deploy war file

Hi All,
I need to deploy a war file into EBS R12. I thought of enable the ias console and deploy. I followed the steps
1. Change $INST_TOP/ora/10.1.3/Apache/Apache/conf/trusted.conf file and change
[Location ~ “/ascontrol”]
Order deny,allow
Deny from all
Allow from localhost
[Location]
to
[Location ~ “/ascontrol”]
Order deny,allow
Allow from all
[Location]
2. Restart Apache
adapcctl.sh stop
adapcctl.sh start
3. Access it via
http://server:port/ascontrol
After doing the above steps, am able to open ias console. But when i go to tab oc4j-instances and click on any instance oafm or forms or oacore, its saying an error Error Mesg: Unable to login to the OC4J "default_group" on Application Server "oacore" the OC4J is not running . I checked opmnctl status, all components are running. Please let me know any suggestion on this.
Also is there any way to deploy war file from back end. I got one utility like admin_client.jar. but when i try to validate using the following command
java -jar admin_client.jar deployer:oc4j:<host>:6003 oc4jadmin welcome123 -validateURI .. giving error as below
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
Valid connection_uris are:
1. To target all OC4J instances that belongs to an OC4J group in an Oracle Application Server Cluster:
deployer:cluster:[ormis:]opmn://opmnHost[:opmnPort]/oc4jGroupName
2. To target a specific OC4J instance within a cluster:
deployer:oc4j:[ormis:]opmn://opmnHost[:opmnPort]/oc4jInstanceName
deployer:oc4j:[ormis:]opmn://opmnHost[:opmnPort]/asInstanceName/oc4jInstanceName
3. To target a standalone OC4J server:
deployer:oc4j:oc4jHost:rmiPort
deployer:oc4j:ormis:oc4jHost:ormisPort
opmnPort is the OPMN request port specified in opmn.xml.
If omitted, defaults to 6003.
Thanks,
Manikandan

Hi;
Please check below thread than recheck your steps
Re: Deploy .war file in Ebs 11i-11.5.10.2
Regard
Helios

I have my iTunes Library on and external hard drive. I have a new computer and want to use iTunes and KEEP my files on the external drive.

My iTunes library is on an external hard drive, and I was able to access / add to the library from my windows laptop.
I now have a new laptop, and want to be able to KEEP the library on the external drive while being able to use iTunes from the new laptop.
I have selected "choose library" in iTunes, and have chosen the iTunes Library.itl file on the external drive.
My media populates in iTunes on the new laptop version of iTunes, but when I click on a song iTunes says that it cannot locate the song.
Your help is kindly appreciated!

Thanks. Were the settings shown in your last screenshot in force when you added the song that's shown on being on the C: drive? It is also possible that at some point you ran iTunes with the external drive disconnected, in which case it will have defaulted to the library on the C: drive, or that you've run iTunes without explicitly selecting the library on the E: drive. To make sure the latter is the case, hold down SHIFT while starting iTunes, then when you get this prompt:
click on Choose Library..., navigate to the location of your current iTunes Library.itl file, and click Open.
Part of your issue may that its not obvious where that current database file is located. The folder layout on your E: drive isn't the one that's most easily managed - so its possible that the database file could be in:
E:\xxxx\Files\iTunes
E:\xxxx\Files\iTunes\iTunes
E:\xxxx\Files\iTunes\iTunes 1
I suggest that a lot of your issues can be addressed by reshaping your library into the reliable "portable" layout as described in tt2's Make a split library portable user tip. Comparing your screenshot with the equivalent on my system (where I have a "well-formed" library on an external drive):
where:
there is just one iTunes folder with everything used by iTunes inside it
all media is held within subfolders of the iTunes Media folder
The way you have yours set up, where the iTunes Media Folder location is set to E:\xxxx\Files\iTunes rather than E:\xxxx\Files\iTunes\iTunes Media is probably why some of your media is not being located correctly - the extent to which iTunes can correctly resolve locations is, to an extent, reliant on the folders for the different media kinds (Music, Audiobooks, etc.) being inside the iTunes Media media folder. One common misunderstanding (not helped at all by Apple's documentation!) is that the iTunes Media Folder location setting in Edit > Preferences > Advanced does not tell iTunes where to find anything; rather it determines where iTunes will put new additions to your Library, in conjunction with the Copy files to iTunes Media folder ... flag:
I would definitely take the time to work through the steps to bring your library into the "portable" shape - there may be few remaining issues with broken links when that's complete but this will be much easier to fix if your library is in a more standard structure.

WHY YOU SHOULD NOT USE SKYPE (and where to file co...

Approximately two weeks ago, my account was blocked for no apparent reason.
I contacted customer support and they didn't know why it was blocked, but told me to go through the account verification process. I asked to speak to someone on the phone to discuss this but was ignored. Then, within 48 hours I suddenly received a NEW email telling me that my account was blocked PERMANENTLY (funnily enough THEY CHARGED ME $25 USD for SKYPE CREDIT before blcoking me!!!). I want to make sure ALL PEOPLE KNOW about the absurd practices of Skype. I am now out $25 USD and permanently locked out my account forever. WHere can we file complaints? Better BUsiness Bureau? I have contacted my rep numerous times on how to overturn this and he just ignores me saying nothign can be done. this is absurd!!
See below from Tyron H (A horrible customer service rep I might add)
Hello,
Good Day! Unfortunately, we cannot re-activate your account. We take the safety of Skype customers very seriously and need to apply certain restrictions to protect our customers' details. We apologize for the inconvenience and appreciate your understanding.
In accordance with paragraph 11.2 of the Skype Terms of Use we have terminated your right to use the Skype software, and have prevented any further access to your Skype account.
This is because you are in breach of paragraph 6.3 (c) of the Terms of Use which prohibits the use of the Skype software to send unsolicited communications. Any Skype Credit that was in your account is non-refundable.
Best Regards,
Tyron H.
Skype Customer Service

My_Money wrote:
A class action in the United States prohibits them from doing this now (in the US) and repayed dupped users.
Hello and welcome to the Skype Community.
To clarify:
The settlement reached in the USA applies to unused Skype Credit being made available to users following a 180 day period of inactivity and is honored by Skype worldwide [except in Japan].
You are referring to a different issue - that of automatically recurring Subscription payments to which you agreed upon signing up.
http://www.skype.com/en/legal/tou/ [item 9.4]
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Open Folder using Coldfusion and loop the files in the folder to the files names

Hello,
I have a folder with lot of .xls files in it.
I want to access a folder using some coldfusion code and then
"loop" through each .xls file in the folder, and while looping is
it possible to obtain the name of each .xls file?
Anyone who knows anything about this, your help would be
highly aprreciated.
Thx

Yup, I know all about it.
You can to if you read up on the <cfdirectory ...> tag
in the
documentation. A very hand tag for reading a directory, even
includes
the ability to filter to a certain file types. And produces a
record
set of the files with names, types and more.

How to use HTML and Java Script files in Portal

Hi,
I am trying to access a web application using iViews. My application contains JSP,HTML,Servlets,JS(java script), image files. I am using JSPDynPro to access the JSP files and I am putting servlets in the private/lib folder of the PORTAL-INF dir of Portal project. Now my problem is almost all the JSP files uses the HTML files, JS files and image files. Where can put these files in the portal project dir structure to give access to the JSP files when i am creating a iView for the JSPDynPro componenets in the irj.
thanks,
Ashok

Hi,
JSPDynpage is the controller, one JSPDynpage can call more than one jsp file according to the coding. Through the JSPDynpage's setJspName() function only you can display a jsp page.
EX:
public void doProcessBeforeOutput() throws PageException {
this.setJspName("logon.jsp");
if you put the JSPDynpage in the src.core then the JSPDynpage can be accessed only by this application.
if you put the JSPDynpage in the src.api then other applications can access this component.
You can put the jsp pages in the pagelet folder.
xml file
=========
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
    <property name="SharingReference" value="com.sap.portal.htmlb"/>
</application-config>
<components>
    <component name="jspdynpage name">
      <component-config>
        <property name="ClassName" value="package name.jspdynpagename"/>
      </component-config>
      <component-profile>
        <property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
      </component-profile>
    </component>
</components>
<services/>
</application>
REWARD USEFUL ANSWERS

Create and deploy executable file

I'm very new to java. I've finished an application, and it runs fine on my develop machine. However, still I can not figure out how to create an executable application, so I can deploy on my clients' machine. Can anyone show me where to go to look up for the information how to create it and how to deploy it? A quick example is very appreciated.
Thanks.

There is a super program out there that does it all for you and you can even set the icon. It is really easy to use - i could do it and is intuitive in the instal for your users. Search for "InstallAnywhere" (the name of the program) and you should find it. Hope it helps.

File download using servlet and jsp. File Dialog comes twice

Hi
I was trying to download a file using servlet. There is a link which calls the servlet. When I click on the link file dialog box comes up. On selecting Open it again shows me the file dialog box. I changed the method from POST to GET and it worked properly.
My question is why does it work with GET and not with POST. I am aware of the differences between POST and GET but am not able to come to a rational explanation for this behaviour.
Please if anyone can explain this to me I am going crazy thinking an answer for this.
Thank you.
Regards
Jay

Hi Jay,
I also have the same question. Why does it work with GET and not for POST?. If you were able to find the answer please let me know.
Thank you.
Regards,
Aravind

Using CHDK and Canon .crw files

Hi,
I recently installed the CHDK hack on a point and shoot canon underwater camera which is great as I can now save the files as RAW - iphoto does not recognize the resulting .crw raw files - I presume this is because they are from a camera that is not supposed to have RAW capability. I have since converted the files to DNG files but iPhoto still does not recognise them (Photoshop CS3 does)
Has anyone managed to get Raw files created by CHDK to work in iPhoto?
regards
Mike

Thanks Terence,
I think if there was some way of adding a new entry to Raw.plist it could be solved for any camera / format - I know it was possible in the past.
I thought that by running the .dng file I created in "dng4ps-2" through Adobe DNG converter it would work but both iPhoto and Aperture must be still reading the camera model,
I will keep searching,
regards
Mike

1.4.2 using deployment.config and deployment.properties

Can anyone tell me if JRE 1.4.2_06 can use the deployment.config and deployment.properties setting like ver 1.5.0 can?
I have to use 1.4.2_06 and need to have the cache point to a common location (vs per user) and also would like to preset the cache size on an install.
This works perfectly on 1.5.0 however, my app requires 1.4.2.
Can anyone point in a direction?
Thanks
Kevin

Hi Kevin,
I am actually working on the same problem.
I need to deploy Java 1.4.2_07 on clients with a mandatory setup. I tryied the deployment.config and deployment.properties file but didn't get it working yet.
I guess we should share knowledge to find a working solution.
It would be nice, if you could email me at:
[email protected]
regards,
Volker

.heu and .swz files in root directory

since a few days i'm finding some .heu and some .swz files in my root directory.
C3306B26751D6A80EB1FCB651912469AE18819AB.swz
etc.
7421C71F94DB4F028E7528B2D278F3FE4DC21273.heu
etc.
the .heu files are all 151 bytes, the .swz files a few to a few hundrets of kb in size.
what are they, where do they come from, and can i delete them without harming OS X?
they belong to my userid, group "admin", and have "-rw-r--r--" permissions.
all i found with google is they could be adobe flash support/cache files.

Humbug. For the OP, move the files to the Trash, restart, and see if anything changes. If not, empty the trash. IIRC, those are generated by Adobe apps, specifically Flash Playrer, and have no business being written to the root-level. Peruse the hits from a google search for *swz file type* and *heu file type*.

$USER_HOME variable not working in Java7u55 deployment.properties file.

I'm trying to setup a separate cache directory for an AppV Java 7u55 package. In the deployment.properties file I created the following entry:
deployment.user.cachedir=$USER_HOME\\AppData\\LocalLow\\Sun\\Java\\Deployment\\Java7cache
But upon initiating an application I do not see the folder created and populated with cache data. This is what I see in the Java7 control panel for the cache path after my edit:
My question, is $USER_HOME still a valid variable for use in the deployment.properties file and if so what is the path that it points to?
UPDATE: So I did find where at least for me this path led to on my desktop a directory called $USER_HOME was created with the rest of the above location following it. Is this correct?
How can I my current setup deployment.user.cachedir=$USER_HOME to go to this location: C:\users\<user account>\AppData\LocalLow\Sun\Java\Deployment\Java7cache\ ???

I don't have an answer to the problem, but I am having problems with the system level deployment.properties file and IE9 on Windows 7 32/64bit.
Starting with version 13, the IE plugin seems to igonore the system level deployment.properties file in favor of the user level deployment.properties file. When I open the Java Control Panel, the settings are correct per the system deployment.properties file. Currently to get the Java Plugin to work reliably in IE9 I have to set the following:
_JAVA_OPTIONS = -Djava.net.preferIPv4Stack=true
Disable caching
Set the proxy to Direct Connection.
If I set the _JAVA_OPTIONS as an environment variable and the other two in the system deployment.properties file, Firefox works fine, but IE wont load either of the Java tests. If I removed the system deployment.properties files and configure the user deployment.properties file, both IE and Firefox work fine.
I find it interesting that if I set the configuration through the control panel, then apply the system deployment.propteries file, the user deployment.properties file reverts to defaults when the system file is removed.

Using RSL and Deploying SWZ files

Similar Messages

Maybe you are looking for