Using signals and Equations
Hi,
I have an equation like this: y'=Q-3y, when Q is a signal comming from Analog Input or simulated but not convencional, such as square pulses with dampings.
My question is which equation VI do I need to use in Labview that will use this signal "Q" as input parameter and perform the equation y'?
Thanks
Dalia Russek
Application Engineer Manager
National Instruments ISRAEL Ltd
Hi, y' is just a mathematic parameter from the equation. I just put a simply equeation to demostrate what I ment, but its usually more complex such as y'=Q-5y-6t-t'. Not always is the same equeation using n-parameters and their derivative. I just thought to use ODE equation or any other mathematic vi, but I didn't know how to give a signal as input parameter. However, the operator vis can be a simple solution.
Dalia Russek
Application Engineer Manager
National Instruments ISRAEL Ltd
Similar Messages
-
I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.
I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.
-
Trying to use signal in and signal out but couldn't pass parameters
Hi all,
I am trying to use Signal out from 1st iview and trying to get the same parameters to the second iview where this iview gets populated when i click a button in result of first iview.
I have created these two iviews in same model and it deployed without errors.
When i run the first iview and give the parameters and say submit i get the result and when i click a button a new iview opens(requirement) but its not taking the same parameters as i have given in first iview.
Could any one give me suggestions how to use them or where should i correct it.
Thanks
VenkatHi,
please follow these steps you will be able to achieve the results:
1.> Go to the form of the first iview.Drag output port and create signal out with proper name.Click the link created in between the signal out and the form and give a proper name(event name). This name you have to mentioned in the button action property.Go to the form and click the button property.Then in action tab you can mentioned the action as custom action.
2.> Configure the signal out means select the fields which you want to transfer to the other iview.
3.> Then go to the other layer and drill down in that.
4.> create a form and drag input port of it and create a signal in and give the same name as you have mentioned in the signal out.
5.> configure the signal in. And give all the fields which you have mentioned in the signal out.(it is case sensitive, so better give the correct names)
6.> Double click the form and select all the fields which you want to be visible on the form.
7.> just save nad deploy the model and you can transfer data between the two iviews.
You can check with this link having same type of issue:
Re: pass data between forms in different layers
Regards,
Nutan -
How to Use signal In and Signal Out with Respect to this Question
Hi,
I have a requirement where i have to change the data of the employee.
For that i am first searching for the employee using a RFC from R/3.
After searching i call another RFC for udating the Data.
The Data is updated successfully in the R/3, but its not reflecting in the Iview.
Can I use the Portal Eventing Mechansim using Signal In and Signal Out.
If yes then please forward me the example or model file to me on
dhruvpradipshah at gmail dot com
Thanks & Regards,
Dhruv ShahDhruv,
You can update the status by passing the return message or the output of the BAPi / RFC in a table or a form in the iview.
Regards,
Ahmed Salah -
Will InDesign accept equations set in MS Word using MathCAD and/or Mathematica?
will InDesign accept equations set in MS Word using MathCAD and/or Mathematica?
I didn't try those. BUT. Equations from the MS Equation Editor are not "accepted", you have to save them as eps or pdf or something. My best option so far is MathType, and a plugin mt.editor lets you edit inside ID
-
Can't open Safari. I get "Can't find server". I get NCSW21 in my address bar. I am using AirPort and have a strong internet signal. I have no problem opening Firefox and surfing the web. Need help. Thanks
Hi Professor66,
I have a couple of suggestions for you regarding this issue. Here are two links to users who have posted similar questions to yours and have found their answers in the responses to their posts:
Safari hangs when loading web pages. | Apple Support Communities
https://discussions.apple.com/thread/3784708
Safari loading blank pages | Apple Support Communities
https://discussions.apple.com/thread/3899912
I would suggest that you first follow the troubleshooting that the OP did in the second link, which is to test in a new user account to see if the behavior is consistent. If it is, you may need to address the issue at a software level by re-installing Safari. More information on this process can be found in the following article:
OS X Mavericks: Reinstall apps that came with your Mac
http://support.apple.com/kb/PH14193
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?
Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.
-
Dear Sir:
I would like to know whether I can generate one AC signal and acquire one DC signal and one AC signal together using NI myDAQ? If I can, could you please tell me the easiest way to achieve the goal? If I cannot, please tell me whether I can use both white box to do this because I have got another white box USB-6008. Cheers
Kind Regards
Jeffduplicate post
Don't create a new thread. In the thread above, you asked for someone to review your code but you did not post a modified VI. Your original one is obviously wrong as I noted. -
my new ipad works perfectly. the iphone 5, however, cannot connect to the same wifi, can barely get a 3G signal, and the power level is at 53% after being barely used for 1\2 a day. Is this a hardware problem?? My old 3Gs was fine until it died.
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
After iOS 8 update no mobile signal and keeps crashing
My iPad 4 is about a year old and I recently updated it to ISO8 big mistake as it now has no mobile signal reception and keeps crashing. restored to factory setting using iTunes and now won't activate, iTunes account won't accept it and the iPad keeps crashing every 2 to 3 mins
help!!Hi Go to settings Email Accounts Delete Email Account then Re add acount back again If you have more than one Email Account do this with each one. Cheers Brian
-
Check control signal and write in 1s, ignore control signal for the following 2s.
I am new to Labview, recently I use DAQ to receive 2 channels, one is expected signal and another one is control signal. If the control signal is higher than threshold (rising edge), write expected data in 1s. Then, ignore the control signal in 2 second. The process is repeated. The attachment is my program but it doesn't work. I use flat sequence to do 2 consecutive tasks but cannot ignore the control signal.
Any help is appreciate.
Attachments:
Save data with control signal.vi 187 KBsiva0182 wrote:
Find attached the picture of the vi where I tried to put in timers.one in each of the frame and at the end added one more frame just to measure the time elapsed .
The last frame and the frame with sourcemeter measurment show adifference of about 140 msec.
Is there any way to improve the speed of this portion?
Probably not. It sounds like the Keithly VI is taking 140 msec. You can try opening that up to see if there is anything in there that could be causing an unnecessary slowdown. But trying to tighten it up too much may cause occasional errors (such as timeouts) in trying to get a response back.
But surprisingly I tried displaying the actual timer value at the start and at the start of sourcemeter read function ..but the display of both indicators is almost equal with little difference of only 10 msec.????? I'm not sure which of the several timers you are referring to here. What is the value going into the wait function between the VISA write and the Keithly VI?
When you do benchmarking, the timer functions should be in a frame all by themselves. Having it mixed with another function or VI causes a bit of uncertainty as to when the time was taken. For instance, you dont' really know if the Keithly VI was started before the time was taken or after. (The time was probably taken first, but without a data flow or sequence structure dependency, you can't be sure.) -
How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload? -
Using slim and xfce4, something crashes on exit
I recently did a fresh install of Arch onto an older PC that I have. It's running a P4 3.06GHz, an nVidia GeForce FX 5900, and 1GB RAM. Because of the lower resources, I decided to use xfce4 and slim. I have a monitor and TV hooked up through s-video with the "seperate X screen" option. Whenever I logout of xfce (this includes, logout, reboot, shutdown), it goes to a blank black screen with a cursor at the top left and just hangs. I have slim configured to run from inittab, so it picks up after a couple seconds. However, if I run startx from console, and then logout of xfce the system just hangs and wont accept any keyboard input (including ctrl+alt+function to switch run levels). Also, if I choose to shutdown or reboot, the system will do so but the only thing I see is the blank screen until the POST. If I do a startx from console, the logout, I'm able to ssh in from my laptop, login and issue a reboot (again the screen doesn't change until the POST). Also, if I turn the "seperate x screen" option off, and just run the desktop on the monitor, it doesn't freeze. I've worked my way through a number of issues so far, but this one has me completely stumped. I'm not sure if there's something wrong with my configuration or if it's just a problem with the graphics driver. Any advice and/or help is greatly appreciated.
Here are configuration and log files:
Xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Wed Jan 27 03:03:53 PST 2010
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri2"
Load "dri"
Load "dbe"
Load "record"
Load "extmod"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
Option "DPI" "95 x 96"
ModelName "CMO CMC 17 AD"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV35 [GeForce FX 5900]"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path ./:/bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
sessionstart_cmd /usr/bin/sessreg -a -l $DISPLAY %user
sessionstop_cmd /usr/bin/sessreg -d -l $DISPLAY %user
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user desktopuser
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
focus_password yes
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
auto_login yes
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme default
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
slim.log isolated reboot
/usr/bin/xauth: creating new authority file /var/run/slim.auth
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:07:00 2010
(==) Using config file: "/etc/X11/xorg.conf"
/usr/bin/xauth: creating new authority file /home/desktopuser/.Xauthority
/usr/bin/startxfce4: X server already running on display :0.0
/tmp/xrdb_dysqQd:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
/tmp/xrdb_dysqQd:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
/tmp/xrdb_dysqQd:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
/tmp/xrdb_dysqQd:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
/tmp/xrdb_dysqQd:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
/tmp/xrdb_dysqQd:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
/tmp/xrdb_dysqQd:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
/tmp/xrdb_dysqQd:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
Agent pid 1617
xfdesktop[1637]: starting up
(xfce4-settings-helper:1639): GLib-GObject-CRITICAL **: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
(xfce4-settings-helper:1639): GLib-GObject-CRITICAL **: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
slim.log isolated logout
slim: waiting for X server to shut down..........
slim: X server slow to shut down, sending KILL signal.
slim: waiting for server to die
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:01:03 2010
(==) Using config file: "/etc/X11/xorg.conf"
Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 18:39:41 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Videocard1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0331:0000:0000 nVidia Corporation NV35 [GeForce FX 5900] rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/134217728, BIOS @ 0x????????/131072
(--) PCI: (0:2:10:0) 4444:0016:0070:b7f3 Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder rev 1, Mem @ 0xf0000000/67108864
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.25 Wed Jan 27 02:59:37 PST 2010
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.25 Wed Jan 27 02:34:38 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "DPI" "95 x 96"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5900 (NV35) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.35.20.18.04
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5900 at PCI:1:0:0:
(--) NVIDIA(0): CMO CMC 17" AD (CRT-0)
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(0): CMO CMC 17" AD (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): TV encoder: NVIDIA
(II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT:nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(**) NVIDIA(0): DPI set to (95, 96); computed from "DPI" X config option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "TwinView" "0"
(**) NVIDIA(1): Option "MetaModes" "TV: nvidia-auto-select +0+0"
(**) NVIDIA(1): Enabling RENDER acceleration
(II) NVIDIA(1): NVIDIA GPU GeForce FX 5900 (NV35) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(1): Memory: 131072 kBytes
(--) NVIDIA(1): VideoBIOS: 04.35.20.18.04
(II) NVIDIA(1): Detected AGP rate: 8X
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): Connected display device(s) on GeForce FX 5900 at PCI:1:0:0:
(--) NVIDIA(1): CMO CMC 17" AD (CRT-0)
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(1): CMO CMC 17" AD (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): TV encoder: NVIDIA
(II) NVIDIA(1): Display Device found referenced in MetaMode: TV-0
(II) NVIDIA(1): Assigned Display Device: TV-0
(II) NVIDIA(1): Validated modes:
(II) NVIDIA(1): "TV:nvidia-auto-select+0+0"
(II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
(==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) NVIDIA(1): Initialized AGP GART.
(II) NVIDIA(1): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(1): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(1): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(1): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(1): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(1): Config Options in the README.
(II) NVIDIA(1): Setting mode "TV:nvidia-auto-select+0+0"
(II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(==) NVIDIA(1): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 1.00
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: Device: "/dev/input/event6"
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found 9 mouse buttons
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found scroll wheel(s)
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found x and y relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as mouse
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as keyboard
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 1.00" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: (accel) acceleration profile 0
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 1.00
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: Device: "/dev/input/event5"
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 1.00" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
errors from errors.log, this stuff just repeats
Mar 19 15:44:43 ArchDaemon kernel: ACPI: I/O resource smsc47m1 [0x680-0x6ff] conflicts with ACPI region IOPM [0x680-0x6ff]
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Did you put the firmware in the hotplug firmware directory?
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Did you put the firmware in the hotplug firmware directory?
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 3
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 0
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 1
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 2
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 2
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 0
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 3
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 1
Mar 19 18:39:22 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Mar 19 18:39:22 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Mar 19 18:39:30 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
errors common in auth.log
Mar 19 13:10:25 ArchDaemon sudo: desktopuser : pam_authenticate: Conversation error ; TTY=unknown ; PWD=/home/desktopuser ; USER=root ; COMMAND=/usr/lib/xfce4/xfsm-shutdown-helper
Mar 19 13:10:30 ArchDaemon dbus-daemon: Rejected send message, 1 matched rules; type="method_call", sender=":1.10" (uid=1001 pid=1567 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=1336 comm="/usr/sbin/hald))I recently did a fresh install of Arch onto an older PC that I have. It's running a P4 3.06GHz, an nVidia GeForce FX 5900, and 1GB RAM. Because of the lower resources, I decided to use xfce4 and slim. I have a monitor and TV hooked up through s-video with the "seperate X screen" option. Whenever I logout of xfce (this includes, logout, reboot, shutdown), it goes to a blank black screen with a cursor at the top left and just hangs. I have slim configured to run from inittab, so it picks up after a couple seconds. However, if I run startx from console, and then logout of xfce the system just hangs and wont accept any keyboard input (including ctrl+alt+function to switch run levels). Also, if I choose to shutdown or reboot, the system will do so but the only thing I see is the blank screen until the POST. If I do a startx from console, the logout, I'm able to ssh in from my laptop, login and issue a reboot (again the screen doesn't change until the POST). Also, if I turn the "seperate x screen" option off, and just run the desktop on the monitor, it doesn't freeze. I've worked my way through a number of issues so far, but this one has me completely stumped. I'm not sure if there's something wrong with my configuration or if it's just a problem with the graphics driver. Any advice and/or help is greatly appreciated.
Here are configuration and log files:
Xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Wed Jan 27 03:03:53 PST 2010
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri2"
Load "dri"
Load "dbe"
Load "record"
Load "extmod"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
Option "DPI" "95 x 96"
ModelName "CMO CMC 17 AD"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV35 [GeForce FX 5900]"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5900"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path ./:/bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
sessionstart_cmd /usr/bin/sessreg -a -l $DISPLAY %user
sessionstop_cmd /usr/bin/sessreg -d -l $DISPLAY %user
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user desktopuser
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
focus_password yes
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
auto_login yes
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme default
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
slim.log isolated reboot
/usr/bin/xauth: creating new authority file /var/run/slim.auth
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:07:00 2010
(==) Using config file: "/etc/X11/xorg.conf"
/usr/bin/xauth: creating new authority file /home/desktopuser/.Xauthority
/usr/bin/startxfce4: X server already running on display :0.0
/tmp/xrdb_dysqQd:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
/tmp/xrdb_dysqQd:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
/tmp/xrdb_dysqQd:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
/tmp/xrdb_dysqQd:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
/tmp/xrdb_dysqQd:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
/tmp/xrdb_dysqQd:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
/tmp/xrdb_dysqQd:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
/tmp/xrdb_dysqQd:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
Agent pid 1617
xfdesktop[1637]: starting up
(xfce4-settings-helper:1639): GLib-GObject-CRITICAL **: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
(xfce4-settings-helper:1639): GLib-GObject-CRITICAL **: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
slim.log isolated logout
slim: waiting for X server to shut down..........
slim: X server slow to shut down, sending KILL signal.
slim: waiting for server to die
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:01:03 2010
(==) Using config file: "/etc/X11/xorg.conf"
Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.5.902 (1.7.6 RC 2)
Release Date: 2010-03-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux ArchDaemon 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/49d062ba-9f7b-4d18-98f2-87249f723889 ro 5 acpi_enforce_resources=lax vga=771
Build Date: 13 March 2010 07:33:22PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 18:39:41 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Videocard1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0331:0000:0000 nVidia Corporation NV35 [GeForce FX 5900] rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/134217728, BIOS @ 0x????????/131072
(--) PCI: (0:2:10:0) 4444:0016:0070:b7f3 Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder rev 1, Mem @ 0xf0000000/67108864
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.25 Wed Jan 27 02:59:37 PST 2010
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.25 Wed Jan 27 02:34:38 PST 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "DPI" "95 x 96"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5900 (NV35) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.35.20.18.04
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5900 at PCI:1:0:0:
(--) NVIDIA(0): CMO CMC 17" AD (CRT-0)
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(0): CMO CMC 17" AD (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): TV encoder: NVIDIA
(II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT:nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(**) NVIDIA(0): DPI set to (95, 96); computed from "DPI" X config option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "TwinView" "0"
(**) NVIDIA(1): Option "MetaModes" "TV: nvidia-auto-select +0+0"
(**) NVIDIA(1): Enabling RENDER acceleration
(II) NVIDIA(1): NVIDIA GPU GeForce FX 5900 (NV35) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(1): Memory: 131072 kBytes
(--) NVIDIA(1): VideoBIOS: 04.35.20.18.04
(II) NVIDIA(1): Detected AGP rate: 8X
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): Connected display device(s) on GeForce FX 5900 at PCI:1:0:0:
(--) NVIDIA(1): CMO CMC 17" AD (CRT-0)
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0)
(--) NVIDIA(1): CMO CMC 17" AD (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(1): TV encoder: NVIDIA
(II) NVIDIA(1): Display Device found referenced in MetaMode: TV-0
(II) NVIDIA(1): Assigned Display Device: TV-0
(II) NVIDIA(1): Validated modes:
(II) NVIDIA(1): "TV:nvidia-auto-select+0+0"
(II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
(==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "CRT:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) NVIDIA(1): Initialized AGP GART.
(II) NVIDIA(1): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(1): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(1): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(1): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(1): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(1): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(1): Config Options in the README.
(II) NVIDIA(1): Setting mode "TV:nvidia-auto-select+0+0"
(II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(==) NVIDIA(1): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 1.00
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: Device: "/dev/input/event6"
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found 9 mouse buttons
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found scroll wheel(s)
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found x and y relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as mouse
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as keyboard
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 1.00" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: (accel) acceleration profile 0
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 1.00
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 1.00: Device: "/dev/input/event5"
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 1.00: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 1.00" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
errors from errors.log, this stuff just repeats
Mar 19 15:44:43 ArchDaemon kernel: ACPI: I/O resource smsc47m1 [0x680-0x6ff] conflicts with ACPI region IOPM [0x680-0x6ff]
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Did you put the firmware in the hotplug firmware directory?
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Did you put the firmware in the hotplug firmware directory?
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 3
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 0
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 1
Mar 19 18:39:21 ArchDaemon kernel: ivtv0: Failed to initialize on minor 2
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 2
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 0
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 3
Mar 19 18:39:22 ArchDaemon kernel: ivtv0: Failed to initialize on minor 1
Mar 19 18:39:22 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Mar 19 18:39:22 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Mar 19 18:39:30 ArchDaemon kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
errors common in auth.log
Mar 19 13:10:25 ArchDaemon sudo: desktopuser : pam_authenticate: Conversation error ; TTY=unknown ; PWD=/home/desktopuser ; USER=root ; COMMAND=/usr/lib/xfce4/xfsm-shutdown-helper
Mar 19 13:10:30 ArchDaemon dbus-daemon: Rejected send message, 1 matched rules; type="method_call", sender=":1.10" (uid=1001 pid=1567 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=1336 comm="/usr/sbin/hald)) -
JVM Crash When Using JNI and COM
I'm trying to call a DLL compiled from VB6 source code that I do not have access to. The VB6 code simply retrieves data from a DB2 database using ADO and my client code grabs that data and marshals it to my Java code. I'm attempting to achieve this using JNI and COM (without a third-party bridge). It works 75% of the time, but the other 25% of the time, the JVM crashes with the usual Hotspot crash log containing an access violation exception. However, I don't know what in my C++ code (VC++ 8) could be causing this except for passing a "wild" pointer to the code lying underneath the COM object interface. If that is the case, I don't know how I am doing that.
The Java code that is calling my native method is running on Tomcat 5.5.25 and just to be safe, I am not allowing multiple threads to concurrently call the method in my JNI DLL (though I realize that this will kill performance). Once I can get past this problem, I'll do the COM interfacing on a worker thread in my native code so I don't screw up CoInitialize and CoUninitialize calls in the case the same thread is concurrently executing multiple calls to my native code.
I've noticed that in most cases, the JVM crashes during my call to the pClsAccount->OpenConnection method. However, my DLL isn't what is listed on the top of the call stack, which is why I suspect the passing of a wild pointer, though I'm just taking a guess at that. Does anyone have an idea as to what's going on ?
JNIEXPORT jobject JNICALL Java_CustomerInfo_nGetCustomerAccountInfo(JNIEnv *env, jobject customerInfo, jstring accountNumber, jstring iniFileName)
jboolean isCopy;
// Account info class and instance to be instantiated
jclass accountInfoCls = NULL;
jobject accountInfoObj = NULL;
// The constructor ID of the accountInfoCls
jmethodID ctorID = NULL;
// Pointer to the interface for the ClsAccount COM object
_clsAccount *pClsAccount = NULL;
HRESULT hr;
BSTR bstrIniFileName(L"");
try
const char *nativeAccountNumber = NULL;
if (accountNumber != NULL)
nativeAccountNumber = env->GetStringUTFChars(accountNumber, &isCopy);
else
jclass newExcCls;
env->ExceptionDescribe();
env->ExceptionClear();
newExcCls = env->FindClass("java/lang/IllegalArgumentException");
env->ThrowNew(newExcCls, "accountNumber passed in was null !");
return NULL;
// Initialization
variantt varConnectionSucceeded = variantt(false);
variantt varGetAccountInfoSucceeded = variantt(false);
variantt varAccountNumber = variantt(nativeAccountNumber);
bstrt bstrLastPaymentDate = bstrt();
bstrt bstrLastErrorMessage = bstrt();
bstrt bstrLastErrorNumber = bstrt();
jlong jTotalDue = NULL;
jlong jEstablishedDueDay = NULL;
jlong jLastPaymentAmount = NULL;
jstring jLastPaymentDate = NULL;
jstring jLastErrorMessage = NULL;
jstring jLastErrorNumber = NULL;
jthrowable jException = NULL;
const char *chLastPaymentDate = NULL;
const char *chLastErrorMessage = NULL;
const char *chLastErrorNumber = NULL;
long long totalDue;
long long lastPaymentAmount;
long establishedDueDateDay;
//Convert string from Java string to C string to VB string
const char *nativeIniFileName = NULL;
if (iniFileName != NULL)
nativeIniFileName = env->GetStringUTFChars(iniFileName, &isCopy);
else
jclass newExcCls;
env->ExceptionDescribe();
env->ExceptionClear();
newExcCls = env->FindClass("java/lang/IllegalArgumentException");
env->ThrowNew(newExcCls, "iniFileName passed in was null");
return NULL;
bstrIniFileName = comutil::ConvertStringToBSTR(nativeIniFileName);
CoInitialize(NULL);
// Create an instance of the COClass with the interface over it
hr = CoCreateInstance(__uuidof(clsAccount), NULL, CLSCTX_INPROC_SERVER, __uuidof(_clsAccount), (void **)&pClsAccount);
if (hr == S_OK)
varConnectionSucceeded.boolVal = pClsAccount->OpenConnection(&bstrIniFileName);
　
if (varConnectionSucceeded.boolVal == -1)
varGetAccountInfoSucceeded.boolVal = pClsAccount->GetAccountPaymentInformation(&(varAccountNumber.GetVARIANT()));
env->ReleaseStringUTFChars(accountNumber, nativeAccountNumber);
// Extract all available account information from the ClsAccount object
if (varGetAccountInfoSucceeded.boolVal == -1)
totalDue = pClsAccount->TotalDue.int64;
establishedDueDateDay = pClsAccount->EstablishedDueDateDay;
lastPaymentAmount = pClsAccount->LastPaymentAmount.int64;
bstrLastPaymentDate = pClsAccount->LastPaymentDate;
chLastPaymentDate = comutil::ConvertBSTRToString(bstrLastPaymentDate.GetBSTR());
jTotalDue = (jlong)totalDue;
jEstablishedDueDay = (jlong)establishedDueDateDay;
jLastPaymentAmount = (jlong)lastPaymentAmount;
jLastPaymentDate = env->NewStringUTF(chLastPaymentDate);
delete[] chLastPaymentDate;
pClsAccount->CloseConnection();
// Populate error fields if any errors occur
bstrLastErrorMessage = pClsAccount->LastErrMessage;
chLastErrorMessage = comutil::ConvertBSTRToString(bstrLastErrorMessage.GetBSTR());
bstrLastErrorNumber = pClsAccount->LastErrNumber;
chLastErrorNumber = comutil::ConvertBSTRToString(bstrLastErrorNumber.GetBSTR());
jLastErrorMessage = env->NewStringUTF(chLastErrorMessage);
jLastErrorNumber = env->NewStringUTF(chLastErrorNumber);
delete[] chLastErrorMessage;
delete[] chLastErrorNumber;
const char* clsName = "com/nuance/merchantsmutual/businessentities/CustomerAccountInfo";
// Find the Java class and the ID of its constructor
accountInfoCls = env->FindClass(clsName);
ctorID = env->GetMethodID(accountInfoCls, "<init>", "(JJJLjava/lang/String;Ljava/lang/String;Ljava/lang/String;)V");
jException = env->ExceptionOccurred();
if (jException != NULL)
env->ExceptionDescribe();
env->ExceptionClear();
//Release all resources associated with the ClsAccount instance
pClsAccount->Release();
//Instantiate the class with the given parameters
accountInfoObj = env->NewObject(accountInfoCls, ctorID, jTotalDue, jEstablishedDueDay, jLastPaymentAmount, jLastPaymentDate, jLastErrorMessage, jLastErrorNumber);
jException = env->ExceptionOccurred();
if (jException != NULL)
env->ExceptionDescribe();
env->ExceptionClear();
else if (hr == REGDB_E_CLASSNOTREG)
cout << "COM class not registered" << endl;
else if ( hr == CLASS_E_NOAGGREGATION)
cout << "COM class can't be aggregated" << endl;
else if (hr == E_NOINTERFACE)
cout << "No interface for COM class clsAccount" << endl;
else if (hr == E_POINTER)
cout << "*ppv pointer was NULL !" << endl;
else
cout << "Error occurred while creating COM object. HR is [" << hr << "]" << endl;
// Free the BSTR because a new one was returned with a call to comutil::ConvertStringToBSTR
SysFreeString(bstrIniFileName);
// Release the string when it's no longer needed. MUST call if string won't be used
// anymore or else a memory leak will occur
env->ReleaseStringUTFChars(iniFileName, nativeIniFileName);
CoUninitialize();
　
catch (_com_error &e)
cout << "Encountered an exception in GetCustomerAccountInfo: Error was " << e.ErrorMessage();
pClsAccount->Release();
catch (...)
pClsAccount->Release();
return accountInfoObj;
Edited by: Cthulhu76 on Jan 5, 2010 9:18 AM0x49202400 JavaThread "ContainerBackgroundProcessor[StandardEngine[Catalina]]" daemon [_thread_blocked, id=5340, stack(0x49bf0000,0x49c40000)]
0x48a7e800 JavaThread "Thread-1" [_thread_in_native, id=5976, stack(0x48f00000,0x48f50000)]
0x48a0dc00 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3072, stack(0x48c60000,0x48cb0000)]
0x48a09000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=4988, stack(0x48c10000,0x48c60000)]
0x48a07c00 JavaThread "Attach Listener" daemon [_thread_blocked, id=3124, stack(0x48bc0000,0x48c10000)]
0x48a07000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2572, stack(0x48b70000,0x48bc0000)]
0x489f5c00 JavaThread "Finalizer" daemon [_thread_blocked, id=5752, stack(0x48b20000,0x48b70000)]
0x489f4c00 JavaThread "Reference Handler" daemon [_thread_blocked, id=2596, stack(0x48ad0000,0x48b20000)]
0x003c6000 JavaThread "main" [_thread_in_native, id=4252, stack(0x00820000,0x00870000)]
Other Threads:
0x489f0400 VMThread [stack: 0x48a80000,0x48ad0000] [id=5624]
0x48a18800 WatcherThread [stack: 0x48cb0000,0x48d00000] [id=1192]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 36288K, used 12762K [0x02940000, 0x050a0000, 0x07800000)
eden space 32256K, 34% used [0x02940000, 0x0343af58, 0x048c0000)
from space 4032K, 37% used [0x04cb0000, 0x04e2ba28, 0x050a0000)
to space 4032K, 0% used [0x048c0000, 0x048c0000, 0x04cb0000)
tenured generation total 483968K, used 7518K [0x07800000, 0x250a0000, 0x42940000)
the space 483968K, 1% used [0x07800000, 0x07f57958, 0x07f57a00, 0x250a0000)
compacting perm gen total 14080K, used 14016K [0x42940000, 0x43700000, 0x46940000)
the space 14080K, 99% used [0x42940000, 0x436f0320, 0x436f0400, 0x43700000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0040f000 C:\Program Files\Apache Software Foundation\Tomcat 5.5\bin\tomcat5.exe
0x7c800000 - 0x7c8c0000 C:\WINDOWS\system32\ntdll.dll
0x77e40000 - 0x77f42000 C:\WINDOWS\system32\kernel32.dll
0x77380000 - 0x77411000 C:\WINDOWS\system32\USER32.dll
0x77c00000 - 0x77c48000 C:\WINDOWS\system32\GDI32.dll
0x77f50000 - 0x77feb000 C:\WINDOWS\system32\ADVAPI32.dll
0x77c50000 - 0x77cef000 C:\WINDOWS\system32\RPCRT4.dll
0x76f50000 - 0x76f63000 C:\WINDOWS\system32\Secur32.dll
0x77ba0000 - 0x77bfa000 C:\WINDOWS\system32\MSVCRT.dll
0x7c8d0000 - 0x7d0cf000 C:\WINDOWS\system32\SHELL32.dll
0x77da0000 - 0x77df2000 C:\WINDOWS\system32\SHLWAPI.dll
0x76290000 - 0x762ad000 C:\WINDOWS\system32\IMM32.DLL
0x77420000 - 0x77523000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.3790.3959_x-ww_D8713E55\comctl32.dll
0x6d7c0000 - 0x6da10000 C:\Program Files\Java\jre1.6.0_07\bin\client\jvm.dll
0x76aa0000 - 0x76acd000 C:\WINDOWS\system32\WINMM.dll
0x7c340000 - 0x7c396000 C:\WINDOWS\system32\MSVCR71.dll
0x6d270000 - 0x6d278000 C:\Program Files\Java\jre1.6.0_07\bin\hpi.dll
0x76b70000 - 0x76b7b000 C:\WINDOWS\system32\PSAPI.DLL
0x6d770000 - 0x6d77c000 C:\Program Files\Java\jre1.6.0_07\bin\verify.dll
0x6d310000 - 0x6d32f000 C:\Program Files\Java\jre1.6.0_07\bin\java.dll
0x6d7b0000 - 0x6d7bf000 C:\Program Files\Java\jre1.6.0_07\bin\zip.dll
0x6d570000 - 0x6d583000 C:\Program Files\Java\jre1.6.0_07\bin\net.dll
0x71c00000 - 0x71c17000 C:\WINDOWS\system32\WS2_32.dll
0x71bf0000 - 0x71bf8000 C:\WINDOWS\system32\WS2HELP.dll
0x71b20000 - 0x71b61000 C:\WINDOWS\system32\mswsock.dll
0x5f270000 - 0x5f2ca000 C:\WINDOWS\system32\hnetcfg.dll
0x71ae0000 - 0x71ae8000 C:\WINDOWS\System32\wshtcpip.dll
0x76ed0000 - 0x76efa000 C:\WINDOWS\system32\DNSAPI.dll
0x76f70000 - 0x76f77000 C:\WINDOWS\System32\winrnr.dll
0x76f10000 - 0x76f3e000 C:\WINDOWS\system32\WLDAP32.dll
0x76f80000 - 0x76f85000 C:\WINDOWS\system32\rasadhlp.dll
0x4a6a0000 - 0x4a6ac000 C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MMI\WEB-INF\lib\CustomerInfoProxy.dll
0x77670000 - 0x777a9000 C:\WINDOWS\system32\ole32.dll
0x77d00000 - 0x77d8b000 C:\WINDOWS\system32\OLEAUT32.dll
0x7c420000 - 0x7c4a7000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_E6967989\MSVCP80.dll
0x78130000 - 0x781cb000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_E6967989\MSVCR80.dll
0x777b0000 - 0x77833000 C:\WINDOWS\system32\CLBCatQ.DLL
0x77010000 - 0x770d6000 C:\WINDOWS\system32\COMRes.dll
0x77b90000 - 0x77b98000 C:\WINDOWS\system32\VERSION.dll
0x75da0000 - 0x75e5d000 C:\WINDOWS\system32\SXS.DLL
0x75e60000 - 0x75e87000 C:\WINDOWS\system32\apphelp.dll
0x4dc30000 - 0x4dc5e000 C:\WINDOWS\system32\msctfime.ime
0x4b0d0000 - 0x4b395000 C:\WINDOWS\system32\xpsp2res.dll
0x71bb0000 - 0x71bb9000 C:\WINDOWS\system32\WSOCK32.dll
0x4bbe0000 - 0x4bbea000 C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MMI\WEB-INF\lib\ClearTranProxy.dll
0x745e0000 - 0x7489e000 C:\WINDOWS\system32\msi.dll
0x71c40000 - 0x71c97000 C:\WINDOWS\system32\NETAPI32.dll
0x4bc50000 - 0x4bc6c000 C:\WINDOWS\system32\DBNETLIB.DLL
0x71f60000 - 0x71f64000 C:\WINDOWS\system32\security.dll
0x76c90000 - 0x76cb7000 C:\WINDOWS\system32\msv1_0.dll
0x76cf0000 - 0x76d0a000 C:\WINDOWS\system32\iphlpapi.dll
0x761b0000 - 0x76243000 C:\WINDOWS\system32\crypt32.dll
0x76190000 - 0x761a2000 C:\WINDOWS\system32\MSASN1.dll
0x4bcf0000 - 0x4bcff000 C:\Program Files\Common Files\System\Ole DB\SQLOLEDB.RLL
0x4a8a0000 - 0x4a8aa000 C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MMI\WEB-INF\lib\MIGI.DLL
0x73570000 - 0x736c2000 C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MMI\WEB-INF\lib\MSVBVM60.DLL
0x4a950000 - 0x4a9e2000 C:\Program Files\Common Files\System\ado\msado15.dll
0x74a50000 - 0x74a6a000 C:\WINDOWS\system32\MSDART.DLL
0x4c850000 - 0x4c8c9000 C:\Program Files\Common Files\System\Ole DB\oledb32.dll
0x4dbb0000 - 0x4dbc1000 C:\Program Files\Common Files\System\Ole DB\OLEDB32R.DLL
VM Arguments:
jvm_args: -Dcatalina.home=C:\Program Files\Apache Software Foundation\Tomcat 5.5 -Dcatalina.base=C:\Program Files\Apache Software Foundation\Tomcat 5.5 -Djava.endorsed.dirs=C:\Program Files\Apache Software Foundation\Tomcat 5.5\common\endorsed -Djava.io.tmpdir=C:\Program Files\Apache Software Foundation\Tomcat 5.5\temp -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.util.logging.config.file=C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\logging.properties -Djava.library.path=C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\MMI\WEB-INF\lib vfprintf -Xms512m -Xmx1024m
java_command: <unknown>
Launcher Type: generic
Environment Variables:
JAVA_HOME=C:\Program Files\Java\jdk1.6.0_07
[error occurred during error reporting (printing environment variables), id 0xc0000005]
--------------- S Y S T E M ---------------
OS: Windows Server 2003 family Build 3790 Service Pack 2
CPU:total 4 (4 cores per cpu, 1 threads per core) family 6 model 7 stepping 6, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3
Memory: 4k page, physical 2097151k(2097151k free), swap 4194303k(4194303k free)
vm_info: Java HotSpot(TM) Client VM (10.0-b23) for windows-x86 JRE (1.6.0_07-b06), built on Jun 10 2008 01:14:11 by "java_re" with MS VC++ 7.1
time: Mon Dec 28 15:24:00 2009
elapsed time: 600 seconds -
Acquiring two signals and saving at a Table
Good Morning,
I'm new to LabVIEW, and I need help at a Data Acquisition. Let me explain it, so I hope you guys can help me.
I need a graph, and a Table displaying two signals acquired at a Field Point conection: Pressure and Temperature.
At this measurement, I need the VI to measure every five minutes, during one minute every measure.
And I need to save the signals to '.txt'.
I need the Table to save both signals, and a "cronometer', to keep in control of any existant difference in the signals, observing the exact time the signals changed, if it changes.
Sorry for the bad English, I'm an aprentice, using the User of the Area's Supervisor.
Thanks.Check out the examples that ship with LV you will find something to get you started. Then if you have specific problems we can help more.Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Maybe you are looking for
-
Plant Replication Classic Scenario SRM 3.0
Hi, would anyone remember the report to replicate plants from R/3 into SRM in SRM 3.0 In 4.0 / 5.0 it is BBP_LOCATIONS_GET_ALL OR BBP_LOCATIONS_GET_FROM_SYSTEM But these so not exists in SRM 3.0 This is urgent. Regards, Rahul
-
Itunes has downloaded,asking which program to open with to finish dowload
Hi I have downloaded itunes on my computer and at the end to finish the download it asks me what program i want to use to open itunes. can anyone help me with this ? when i done this in the past the windows installer just loaded itunes ?
-
Factory resetting a series 40 handset
I've just been messing with my old 5100 and want to factory reset it, the restore factory settings doesn't work as all my old photos ect are still on it. how do i get it back to as it was when new? cheers Rich Nexu 5
-
Contact can be edited but not deleted
Hi there, New poster here and I wanted to share something peculiar about my new kin twom. I seem to have one contact that can be edited but not deleted. When I click the contact, all I get at the top are "favorite" and "edit" buttons. However, all my
-
My son received a new Nano for Christmas. My wife and I both have older i-pods that have been working fine with i-tunes 7.???. When I tried to connect my son's new i-pod, we received the error that we needed to download the latest i-tunes in order to