Using Table name as value for formula
I am using a table as a list for lookup in other tables using vlookup. The entire table is the source, so I'd like to do something like:
=Vlookup("value to lookup", TableName, 3)
However, it seems the entire reference including columns must be included. Is this so?
Thanks for your help.
I understand why they didn't do this. Many times you do not need to look up the values in the A column, but in the B or C column. This forces the novice user, and advanced users, to fully evaluate their expression. e.g. Numbers should not make any assumptions about your intentions.
A novice user might see experienced users that use the shorthand for examples, and assume that you MUST use the entire table, and they would go off making these very odd looking tables just to accommodate this misconception.
I wouldn't doubt if they tested this with a small set of novice users and got some very confused responses. then nixed it.
just my 2 cents from writing programs for those very users,
Jason
Similar Messages
-
How to find the list of un used table names in a schema?
Hi,
I have a doubt in Oracle. The doubt is that If we are using any tables in Function Or Proc.... Then...We can list all those used table names from USER_DEPENDENCIES system table. Right...
But, If the table is used with Execute Immediate Statement, then, those table names are not coming out with USER_DEPENDENCIES system table. Because they are identified at run time and not compile time.
It is fine. And I agree.. But, If I want to list out those tables also...then...How to do? Any idea?
I think ‘USER_SOURCE’ system table may not be the right one. If there is any other system table avails for this purpose...then..it would be very grateful to extract right...
So I am wanting that exact system table.
Please let me know about this, if you have any idea or check with your friends if they have any idea.
Regards,
Subramanian GHi Guys,
Thanks for all your answers.
Yes....You are all right. We can list out the used tables upto certain extent. Anyhow, I have done some R&D to derive the SQL's which is given below:
SELECT TABLE_NAME FROM USER_TABLES
MINUS
SELECT DISTINCT UPPER(REFERENCED_NAME)
FROM user_dependencies
where
referenced_type='TABLE' and UPPER(NAME) in
select distinct UPPER(object_name) from user_objects where UPPER(object_type) in
'MATERIALIZED VIEW',
'PACKAGE',
'PACKAGE BODY',
'PROCEDURE',
'TRIGGER',
'VIEW',
'FUNCTION'
UNION
SELECT UT.TABLE_NAME FROM
SELECT TABLE_NAME FROM USER_TABLES
MINUS
SELECT DISTINCT UPPER(REFERENCED_NAME)
FROM user_dependencies
where
referenced_type='TABLE' and UPPER(NAME) in
select distinct UPPER(object_name) from user_objects where UPPER(object_type) in
'MATERIALIZED VIEW',
'PACKAGE',
'PACKAGE BODY',
'PROCEDURE',
'TRIGGER',
'VIEW',
'FUNCTION'
AND REFERENCED_OWNER=(SELECT sys_context('USERENV', 'CURRENT_SCHEMA') FROM dual)
) UT,
( SELECT * FROM USER_SOURCE
WHERE NAME IN
( SELECT DISTINCT NAME FROM USER_SOURCE
WHERE TYPE NOT IN ('TYPE')
AND
UPPER(TEXT) LIKE '%EXECUTE IMMEDIATE%'
) US
WHERE
UPPER(US.TEXT) LIKE '%'||UPPER(UT.TABLE_NAME)||'%'
AND
(UPPER(US.TEXT) NOT LIKE '%--%')
The above SQL Query can list out unused tables by checking the Dynamic SQL Statement also upto some level only.
Once we extracted the list of unused tables, having a manual check would be also greater to verify as it is should not impact the business applications.
Regards,
Subramanian G -
Problem in using table name dynamically in PL/SQL
I tried to create a procedure to use table name dynamically and got the following error. Anything wrong with my procedure?
NFADV>declare
2 cnt number;
3 cursor cur is select table_name from user_tables where table_name in ('EMP','DEPT');
4 begin
5 for c1 in cur
6 loop
7 execute immediate select count(*) into cnt from c1.table_name;
8 dbms_output.put_line('Count is : '||cnt);
9 end loop;
10 end;
11 /
declare
ERROR at line 1:
ORA-06550: line 7, column 21:
PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternatively-quo
ORA-06550: line 8, column 5:
PLS-00103: Encountered the symbol "DBMS_OUTPUT"
ORA-06550: line 8, column 45:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
. ( , * % & - + / at mod remainder rem <an identifier>
<a double-quoted delimited-identifier> <an exponent (**)> as
from into || multiset bulkThanks and Regards
KaustubhHi,
The wrong part is in execute immediate, it should be as follows:
execute immediate ('select count(*) from '|| c1.table_name)
into cnt
(not tested)
Regards
AK -
How to use the same variable value for data entry and the planning sequence
Hi,
the scenario is the following:
Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
Ravi Thothadri -
How to set a new value for formula field in crystal reports xi?
<p>How to set a new value for formula field in crystal reports xi?</p><p>//formula</p><p>{@description}</p><p> </p><p>exemplo in VB6</p><p>crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" or</p><p>crxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"</p><p>How to in JRC?</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>
Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
<p>Blair Wheadon</p>
<p>Product Manager, Crystal Reports</p> -
Unable to use Table name in a variable
Hi,
I am trying to build a select statement which uses table name in a variable. Please help me in building such statements.
Regards
KishoreHi,
I am trying to build a select statement which uses table name in a variable. Please help me in building such statements.
Regards
Kishore -
Table name in APO for demand planning
Hi gurus,
I want to upload Excel data (forecast demand) into APO SNP for the following fields
APO product
APO product Name
Demand Qty
Demand Date
Can you please tell me the suitable table name in APO for those fields?
Regards
Rajib PathakHi,
APO Product - /SAPAPO/MATKEY
APO product name-/SAPAPO/MATKEY
Edited by: Sreenivasu on May 21, 2009 12:16 PM -
How to use table name dynamically in report procedure
Hello every body
I want to use table name dynamically means at runtime i want to pass table name.
I can do this by lexical parameter in main query.
But my problem is that i want to crate new format trigger or new function that use 1 cursor in which that lexical parameter : table name is used.
so how to do that?
i can not use that lexical parameter it is giving error.
please help me how to do that.Call a database function which you pass the lexical parameter. Then in the database function you use dynamic sql or the execute immediate option to build the SQL string.
Return the information from this function to build your business logic on in your format trigger.
Marcos -
Using variables as table names. Ideas for alternative designs
Hi,
I am designing an application which uses synonyms to pull information from 'client' DBs via DB Links. The synonyms are created with a DB_ID in the name (example: CUSTOMER_100, CUSTOMER_200... where 100 and 200 are DB IDs from 2 separate client DBs.
I have a procedure which selects data from the synonym based on what DB_ID is passed to the procedure. I want to be able to run this one procedure for any DB_ID that is entered. I am now aware I cannot use variable names for table names and using EXECUTE IMMEDIATE doesnt seem to fit for what I am trying to do.
Does anybody have any suggestions or re-design options I could use to achieve this generic procedure that will select from a certain synonym based on the DB info input parameters? Thanks.
CREATE OR REPLACE PROCEDURE CUSTOMER_TEST(p_host IN VARCHAR2, p_db_name IN VARCHAR2, p_schema IN VARCHAR)
IS
v_hostname VARCHAR2 (50) := UPPER (p_host);
v_instance VARCHAR2 (50) := UPPER (p_db_name);
v_schema VARCHAR2 (50) := UPPER (p_schema);
v_db_id NUMBER;
v_synonym VARCHAR2(50);
CURSOR insert_customer
IS
SELECT
c.customer_fname,
c.customer_lname
FROM v_synonym_name c;
BEGIN
-- GET DB_ID BASED ON INPUT PARAMETERS
select d.db_id
into v_db_id
from t_mv_db_accounts ac,
t_mv_db_instances i,
t_mv_dbs d,
t_mv_hosts h
where ac.db_ID = d.db_ID
and i.db_ID = d.db_ID
and i.HOST_ID = h.host_id
and upper(H.HOST_NAME) = v_hostname
and upper(D.DB_NAME) = v_instance
and upper(Ac.ACCOUNT_NAME) = v_schema;
--APPEND DB_ID TO THE SYNOYNM NAME
v_synonym := 'CUSTOMER_'||v_db_id;
FOR cust_rec IN insert_customer
LOOP
INSERT INTO CUSTOMER_RESULTS (First_Name, Last_Name)
VALUES (cust_rec.customer_fname, cust_rec.customer_lname);
END LOOP;
COMMIT;
END;
Rgs,
RobHi
rules engine style with table that holds the logic or code SQL directly in the procedure and IF THEN ELSE with db_id. Latter is better because SQL is native and objects are checked every time procedure is compiled.
James showed the simplest way but this rather complex way gives you more flexibility between instances if ever needed.
CREATE TABLE synonym_dml(db_id number not null primary key, sql_text clob)
INSERT INTO synonym_dml VALUES (100, 'INSERT INTO customer_results (first_name, last_name) SELECT customer_fname,customer_lname FROM customer100')
INSERT INTO synonym_dml VALUES (200, 'INSERT INTO customer_results (first_name, last_name) SELECT customer_fname,customer_lname FROM customer200')
set serveroutput on size unlimited
create or replace
PROCEDURE Execute_Synonym_Dml(p_host VARCHAR2, p_db_name VARCHAR2, p_schema VARCHAR) IS
BEGIN
FOR r IN (
SELECT sql_text FROM synonym_dml
-- WHERE db_id IN (
-- SELECT d.db_id
-- FROM t_mv_db_accounts ac, t_mv_db_instances i, t_mv_dbs d, t_mv_hosts h
-- WHERE ac.db_id = d.db_id
-- AND i.db_id = d.db_id
-- AND i.host_id = h.host_id
-- AND upper(h.host_name) = p_hostname
-- AND upper(d.db_name) = p_instance
-- AND upper(ac.account_name) = p_schema
LOOP
DBMS_OUTPUT.PUT_LINE('-- executing immediately ' || r.sql_text);
--EXECUTE IMMEDIATE r.sql_text;
END LOOP;
END;
create or replace
PROCEDURE Execute_Synonym_Dml_Too(p_host VARCHAR2, p_db_name VARCHAR2, p_schema VARCHAR) IS
PROCEDURE DB_ID_100 IS
BEGIN
DBMS_OUTPUT.PUT_LINE('-- executing DB_ID_100');
--INSERT INTO customer_results (first_name, last_name) SELECT customer_fname,customer_lname FROM customer100;
END;
PROCEDURE DB_ID_200 IS
BEGIN
DBMS_OUTPUT.PUT_LINE('-- executing DB_ID_200');
--INSERT INTO customer_results (first_name, last_name) SELECT customer_fname,customer_lname FROM customer200;
END;
BEGIN
FOR r IN (
SELECT 100 db_id FROM dual
-- SELECT d.db_id
-- FROM t_mv_db_accounts ac, t_mv_db_instances i, t_mv_dbs d, t_mv_hosts h
-- WHERE ac.db_id = d.db_id
-- AND i.db_id = d.db_id
-- AND i.host_id = h.host_id
-- AND upper(h.host_name) = p_hostname
-- AND upper(d.db_name) = p_instance
-- AND upper(ac.account_name) = p_schema
LOOP
IF (r.db_id = 100) THEN
DB_ID_100;
ELSIF (r.db_id = 200) THEN
DB_ID_200;
ELSE
RAISE_APPLICATION_ERROR(-20001, 'Unknown DB_ID ' || r.db_id);
END IF;
END LOOP;
END;
EXECUTE Execute_Synonym_Dml('demo','demo','demo');
EXECUTE Execute_Synonym_Dml_Too('demo','demo','demo');
DROP TABLE synonym_dml PURGE
DROP PROCEDURE Execute_Synonym_Dml
table SYNONYM_DML created.
1 rows inserted.
1 rows inserted.
PROCEDURE EXECUTE_SYNONYM_DML compiled
PROCEDURE EXECUTE_SYNONYM_DML_TOO compiled
anonymous block completed
-- executing immediately INSERT INTO customer_results (first_name, last_name) SELECT customer_fname,customer_lname FROM customer100
-- executing immediately INSERT INTO customer_results (first_name, last_name) SELECT customer_fname,customer_lname FROM customer200
anonymous block completed
-- executing DB_ID_100
table SYNONYM_DML dropped.
procedure EXECUTE_SYNONYM_DML dropped. -
Default multiple values for formula variable on variable selection screen
Hi All,
Suppose 'A' is formula variable with customer exit as processing type then i want four default values for this variable eg: 3, 6,9, and 12 as selection options, when we will execute query user can able to pick any one of the default value.
is it possible in BEx for formula variables?
I also tried with ABAP code in 'cmod' t-code, but it is not working properly for 4 default values....but for single default value, code is working fine.
I am using following code ::
When 'ZCSIMCTB'. // variable name
IF i_step = '1'.
CLEAR : l_s_range.
l_s_range-low = 3.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 6.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 9.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 12.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
Thanks in advanceHi Sankar,
Thanks for reply...
With single quotes also its not working.......
Also as I am using Formula Variable so by default "Single Value" is coming on Variable Details....
Regards,
NIlesh -
Use table name in UPDATE statement as variable
Hi All,
I am using ORACLE 9i AIX base. I want to write following procedure:
PROCEDURE update_header (
p_care_msg_nbr IN NUMBER,
p_care_msg_id IN NUMBER,
p_care_msg_gkey IN NUMBER,
p_old_status IN VARCHAR2,
p_new_status IN VARCHAR2
IS
l_table varchar2(50);
BEGIN
l_table := 'CARE_EDI_MESSAGES';
UPDATE '&l_table'
SET status = p_new_status,
changed = sysdate,
changer = user
WHERE care_msg_no = p_care_msg_nbr
AND care_msg_id = p_care_msg_id
AND gkey = p_care_msg_gkey
AND status = p_old_status;
END;
I want to give the table name by passing value in a variable or parameter. Is it the write way or can I do this function in any other way.
Pleae tell me in urgency.
Thanks & Regards
Hassan RazaThis implies that you have several tables with identical or near identical structures, otherwise you will get errors if any of the mentioned columns do not exist in the table passed but ...
You cannot use a substitution variable that way. Oracle will ask for a value when you try to create the procedure, and compile what ever value you supply into the procedure viz.
SQL> CREATE PROCEDURE p AS
2 l_id NUMBER;
3 BEGIN
4 SELECT id INTO l_id FROM &t;
5 END;
6 /
Enter value for t: T
old 4: SELECT id INTO l_id FROM &t;
new 4: SELECT id INTO l_id FROM T;
Procedure created.
SQL> SELECT text FROM user_source WHERE name = 'P'
2 ORDER BY line;
TEXT
PROCEDURE p AS
l_id NUMBER;
BEGIN
SELECT id INTO l_id FROM T;
END;Even if that is the effect you want, note that there are no quotes around the substitution variable in the CREATE statement.
If you want to be able to pass the name of the table to the procedure, then you need to make the table name a parameter, then build the sql statement and execute it using EXECUTE IMMEDIATE. Something more like:
PROCEDURE update_header (p_care_msg_nbr IN NUMBER,
p_care_msg_id IN NUMBER,
p_care_msg_gkey IN NUMBER,
p_old_status IN VARCHAR2,
p_new_status IN VARCHAR2,
p_table IN VARCHAR2) IS
l_sqlstr VARCHAR2(4000);
BEGIN
l_sqlstr := 'UPDATE '||p_table||' SET status = :b1 '||
'changed = sysdate, changer = user '||
'WHERE care_msg_no = :b1 and care_msg_id = :b3 and '||
'gkey = :b4 and status = :b5';
EXECUTE IMMEDIATE l_sqlstr
USING p_new_status, p_care_msg_nbr, p_care_msg_id, p_care_msg_gkey, p_old_status;
END;HTH
John -
Use Table Name in Summary Table
Hi,
I am looking for a way to use the names of tables in another table.
eq. I have tables named after the months. And I want to use this name in another table in which i summarize all the facts from the mont tables. Is there a way to refer to the table name?
Thanks in Advance PaulHi Jerrold
It seems that we made the same interpretation.
I just wished to give a soluce allowing the user to change easily the name of the referenced table.
In my sample, if I add a new table, the required task is just to add it's name in the first column and replicate the original formula with no change.
For a single formula, it changes quite nothing but if we use many cells, it's an efficient time saving.
I just gave a really bare example.
Here is one with more referenced cells.
Don't worry, the separator is semi-colon because I ran Numbers in English on my French system
Yvan KOENIG (VALLAURIS, France.) mardi 11 août 2009 17:19:46 -
How to get the column name and table name with value
Hi All
I have one difficult requirement
I have some column values and they have given some alias column names but i need to find the correct column name and table name from the database.
For example value is "SRI" and i dont know the table and exact column name so is there any possibilities to find the column name and table name for the given value
Thanks & Regards
Srikkanth.MSearching all the database for a word...
Courtesy of michaels...
michaels> var val varchar2(5)
michaels> exec :val := 'as'
PL/SQL procedure successfully completed.
michaels> select distinct substr (:val, 1, 11) "Searchword",
substr (table_name, 1, 14) "Table",
substr (t.column_value.getstringval (), 1, 50) "Column/Value"
from cols,
table
(xmlsequence
(dbms_xmlgen.getxmltype ('select ' || column_name
|| ' from ' || table_name
|| ' where upper('
|| column_name
|| ') like upper(''%' || :val
|| '%'')'
).extract ('ROWSET/ROW/*')
) t
-- where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'DEPARTMENTS')
order by "Table"or
11g upwards
SQL> select table_name,
column_name,
:search_string search_string,
result
from (select column_name,
table_name,
'ora:view("' || table_name || '")/ROW/' || column_name || '[ora:contains(text(),"%' || :search_string || '%") > 0]' str
from cols
where table_name in ('EMP', 'DEPT')),
xmltable (str columns result varchar2(10) path '.')
TABLE_NAME COLUMN_NAME SEARCH_STRING RESULT
DEPT DNAME es RESEARCH
EMP ENAME es JAMES
EMP JOB es SALESMAN
EMP JOB es SALESMAN
4 rows selected. -
How to use table name as variable in insert statement
Hi,
I want to insert data from the cursor into the table and I want to submit table name as a variable. I tried the code below but it's not working. Any ideas how to solve this problem? Thx
DECLARE
v_new_table_name VARCHAR2(30) := 'test';
--open cursor
CURSOR ACM IS
SELECT *
FROM DWH.CLI_DIMENSION@SLSPDW CLI
WHERE where_clause
FROM some_table;
BEGIN
FOR REC_ACM IN ACM LOOP
EXECUTE IMMEDIATE 'INSERT INTO ' || v_new_table_name || ' VALUES REC_ACM'; --table name as a variable in which the data from cursor will be inserted
V_ROWCOUNT := V_ROWCOUNT + 1;
IF MOD(V_ROWCOUNT, 100) = 0 THEN --this feature commits after 100 rows.
COMMIT;
END IF;
END LOOP;
COMMIT;
DBMS_OUTPUT.PUT_LINE('Number of inserted records:' || V_ROWCOUNT);
END;Try this and let me know if it works. I have not tested it so I can not say for sure.
DECLARE
v_new_table_name VARCHAR2(30) := 'test';
CURSOR ACM IS
SELECT * FROM DWH.CLI_DIMENSION@SLSPDW CLI
WHERE where_clause
FROM some_table;
BEGIN
loop
fetch ACM INTO REC_ACM
exit when ACM%NOTFOUND;
EXECUTE IMMEDIATE 'INSERT INTO ' || v_new_table_name || ' VALUES REC_ACM';
V_ROWCOUNT := V_ROWCOUNT + 1;
IF MOD(V_ROWCOUNT, 100) = 0 THEN
COMMIT;
END IF;
end loop;
COMMIT;
DBMS_OUTPUT.PUT_LINE('Number of inserted records:' || V_ROWCOUNT);
END; -
How to use different default parameter value for different report subscriptions
In ssrs is it possible to define different default parameter values for different subscriptions? In the following example I have a report which has two subscriptions with different start date and end date values:
Report name – Testsubscription.rdl
Subscription-1
Input parameter (default values):
start_date = first day of current Month
end_date = till date
Subscription-2
Input parameter (default values):
start_date = first day of current Quarter
end_date = till date
I know an alternative way of doing this would be to copy the rdl file with a different name but I am curious whether this can be done within a single report definition file. I am using SQL Server 2008 R2 Standard Edition.
Thanks!
sppHi sppdba,
As per my understanding, there is a report with two parameter: start_date and end_date, you want to configure subscription for the report, and set different default values for start date and end date. And you want to know if it is possible to achieve you
goal by using a single report definition file.
Since you are using SQL Server 2008 R2 Standard Edition, we need to achieve your goal by configuring two subscriptions for the report. For detail information, please refer to the following steps:
1. In design surface, right click start_date and open Parameter Properties dialog box.
2. In General pane, type Name and Prompt, set Data Type to Date/Time.
3. Click Available Values in left pane, select Specify Values.
4. Click Add button, in Label text box, type “First day of Current Month”, click (fx) button in Value section, then type the expression like below:
=DateSerial(Year(Now()), Month(Now()), 1)
5. Click Add button, in Label text box, type “First day of Current Quarter”, click (fx) button in Value section, then type the expression like below, then click OK.
=DateSerial(Year(Now()), (3*DatePart("q",Now()))-2, 1)
6. Right click end_date and open Parameter Properties dialog box.
7. In Available Values pane, select Specify Values.
8. Click Add button, in Label text box, type “Today”, click (fx) button in Value section, then type the expression =Today(), then click OK.
Now that the parameters are created, we need to configure subscription for the report. For detail information, please follow these steps:
1. Open Report Manager, and locate the report for which you want to create a new subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Subscription.
5. Select the delivery extension and data source for the subscription.
6. Select a method of delivery, then choose report delivery options.
7. Specify conditions that cause the subscription to process and delivery to occur.
8. Set start_date to First day of Current Month, end_date to Today, then click OK.
9. Create a new subscription as step4 to 7, set start_date to First day of Current Quarter, end_date to Today, then click OK.
The following screenshots are for your reference:
For detail information about Creating Standard Subscriptions, please refer to the following document:
http://msdn.microsoft.com/en-us/data/ms156307(v=sql.105)
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Maybe you are looking for
-
Still can't view acrobat files in Safari
I recently upgraded to OS X 10.6.2 and can no longer view acrobat files in Safari 4.0.4. I deleted the Adobe PDF plugin from /Library/Internet Plug-Ins (as suggested in another post in this forum) with no luck. Does anyone have another idea that coul
-
What do to when i've lose my ipod touch?
i lost my ipod touch a while ago and only just realised that it's under guarantee,is there any way of finding it,or exchanging it or something like that?
-
SQL query to see if "NO COUNT" is on or off
I would like to see if "NO COUNT" is turned on in an existing database. I don't have access to the database properties in the Object Explorer and would like to determine this with a sql statement if possible. What sql should be used to see if "NO CO
-
I hooked up my ipod color to a windows 8.1 and now it does not work.
After my computer was upgraded to windows 8.1 and the latest version of Itunes was installed. I hooked up my Ipod Color to the USB port to re-sync the Ipod, Itunes wanted to format the drive before I could use it on the computer. After Itunes got d
-
IPod won't mount on new Mac Pro
I just got a new Mac Pro that came with Snow Leopard. After getting everything setup I plugged in my iPod shuffle and it won't mount when plugged into either of the 2 front USB ports or any of the 3 back USB ports. When I plug it into the USB port on